ftoc.indd 16
10/10/08 5:17:22 PM
SEVENTH EDITION
PROJECT MANAGEMENT A Managerial Approach
ffirs.indd 1
10/10/08 5:16:30 PM
SEVENTH EDITION
PROJECT MANAGEMENT A Managerial Approach
Jack R. Meredith Broyhill Distinguished Scholar and Chair in Operations Wake Forest University
Samuel J. Mantel, Jr. Joseph S. Stern Professor Emeritus of Operations Management University of Cincinnati
John Wiley & Sons, Inc.
ffirs.indd 3
10/10/08 5:16:35 PM
ftoc.indd 16
10/10/08 5:17:22 PM
Dedication To Avery and Mitchell, from “papajack.”
J. R. M.
To Maggie and Patty for their help, support, and affection.
S. J. M.
VICE PRESIDENT & EXECUTIVE PUBLISHER Don Fowley EXECUTIVE EDITOR Beth Golub ASSOCIATE EDITOR Jen Devine MARKETING MANAGER Carly DeCandia Design Director Harry Nolan SENIOR DESIGNER Kevin Murphy SENIOR PRODUCTION EDITOR Patricia McFadden SENIOR Media editor Lauren Sapira PRODUCTION MANAGEMENT SERVICES Ingrao Associates This book was set in by GGS Book Services PMG and printed and bound by RRD/Willard. The cover was printed by
RRD/Willard. This book is printed on acid free paper. Copyright © 2009 John Wiley & Sons, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as permitted under Sections 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc. 222 Rosewood Drive, Danvers, MA 01923, website www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030-5774, (201)748-6011, fax (201)748-6008, website http://www.wiley.com/go/permissions. To order books or for customer service, please call 1-800-CALL WILEY (225-5945). ISBN-13 978-0-470-22621-6 Printed in the United States of America 10 9 8 7 6 5 4 3 2 1
ffirs.indd 4
10/10/08 5:16:35 PM
Preface
APPROACH The use of projects and project management continues to grow in our society and its organizations. We are able to achieve goals through project organization that could be achieved only with the greatest of difficulty if organized in traditional ways. Though project management has existed since before the days of the great pyramids, it has enjoyed a surge of popularity beginning in the 1960s. A project put U.S. astronaut Neil Armstrong on the moon. A project named “Desert Storm” freed the nation of Kuwait. An annual project brings us Girl Scout cookies as a sign that winter is just about finished. (They were a bit optimistic this year.) The use of project management to accomplish the many and diverse aims of society’s varied organizations continues to grow. Businesses regularly use project management to accomplish unique outcomes with limited resources under critical time constraints. In the service sector of the economy, the use of project management to achieve an organization’s goals is even more common. Advertising campaigns, voter registration drives, political campaigns, a family’s annual summer vacation, and even management seminars on the subject of project management are organized as projects. A relatively new growth area in the use of project management is the use of projects as a way of accomplishing organizational change. Indeed, there is a rapid increase in the number of firms that use projects as the preferred way of accomplishing almost everything they undertake. Not even the most optimistic prognosticators foresaw the explosive growth that has occurred in the field. As the field has grown, so has its literature. There are “cookbooks” that describe in detail the specific steps required to carry out a project, but they do not address the whys nor do they usually discuss how and why the parts fit together. Another type of book focuses on specific subjects important to project managers, team building or scheduling, for example. These are quite helpful for team builders or schedulers, but team building and scheduling are only two of the serious problems a project manager must face. There are books that “talk about” project management—but only occasionally about how to manage a project. There are books on earned value calculations, cost estimating, purchasing, project management software, leadership, planning information technology (IT) projects, and similar specialized or sub-specialized subjects. These are valuable for experienced project managers who can profit from an advanced education in specific areas of knowledge, but one cannot learn to manage projects from these specialized sources. There are also handbooks—collections of articles written mainly by academics and consultants on selected topics of interest to project managers. Handbooks do not, nor do they pretend to, offer broad coverage of the things project managers need to know.
fpref.indd 5
10/10/08 5:17:03 PM
vi Preface Once the project manager has been educated on the basics of project management, these handbooks often represent valuable collections of relevant readings. Unfortunately, project management seems to be reentering a stage that we thought had passed—arguments within the profession (and among those who teach it) about what we really need to know to manage projects. Must we know “how to manage people” or “how to use computers and do quantitative methods”? Lately we have been receiving email from teachers such as the one who urged us to drop “all the math” and pay more attention to conflict resolution, and another who suggested that we cut back on the “touchy-feely stuff and stick with the important things like scheduling and budgeting.” We believe that insight into human behavior, knowledge of organizational issues, and skill with certain quantitative methods are all necessary (though not necessarily sufficient) for successful project management. This book reflects that belief. It addresses project management from a management perspective rather than a cookbook, special area treatise, or collection of loosely associated articles. Such a book should address the basic nature of managing all types of projects—public, business, engineering, information systems, and so on—as well as the specific techniques and insights required to carry out this unique way of getting things done. It should deal with the problems of selecting projects, initiating them, and operating and controlling them. It should discuss the demands made on the project manager and the nature of the manager’s interaction with the rest of the parent organization. The book should cover the difficult problems associated with conducting a project using people and organizations that represent different cultures and may be separated by considerable distances. Finally, it should even cover the issues arising when the decision is made to terminate a project. This managerial perspective is the view we have taken here. As we noted earlier, we are occasionally advised to “cut the BS,” apparently a reference to any aspect of project management that is not mathematical, technical, or governed by strict rules of procedure. The argument is that “management is just common sense.” It is quite possible that such a statement is true, but if so, the word “common” is used in the sense of “common carrier”—something available to everyone. Sadly, everyone does not seem to have managerial common sense. If everyone did, there would be no market for Scott Adam’s Dilbert—selected illustrations of which are reproduced here where appropriate. The book is primarily intended for use as a college textbook for teaching project management at the advanced undergraduate or master’s level. The book is also intended for current and prospective project managers who wish to share our insights and ideas about the field. We have drawn freely on our personal experiences working with project managers and on the experience of friends and colleagues who have spent much of their working lives serving as project managers in what they like to call the “real world.” Thus, in contrast to the books described earlier about project management, this book teaches students how to do project management. As well as being a text that is equally appropriate for classes on the management of service, product, or engineering projects, we have found that information systems (IS) students in our classes find the material particularly helpful for managing their IS projects. Thus, we have included some coverage of material concerning information systems and how IS projects differ from and are similar to regular business projects.
ORGANIZATION AND CONTENT Given this managerial perspective, we have arranged the book to use the project life cycle as the primary organizational guideline. In this seventh edition we have altered the organization slightly to demark more clearly the activities that occur before the launch of the project, setting up those activities that have to do with the context (or initiation) of the project in the
fpref.indd 6
10/10/08 5:17:03 PM
preface
vii
first part of the book, and those that have to do with the planning for the project in the second part. Actually executing the project to completion constitutes the third part of the book. We have found it to be a comfortable framework for the reader. Following an introductory chapter that comments on the role and importance of projects in our society and discusses project management as a potential career for aspiring managers, the book covers the context, events, and issues arising during the management of projects in the order in which they usually occur in the life of a project. Part I, Project Initiation concerns the context of the project, which is crucial for the project manager (PM) to understand if he or she is to be successful in executing the project. It begins with a description of how projects are selected for implementation, frequently based on their tie to the organization’s strategy and goals. Part I also covers the many roles and responsibilities of the project manager (PM), the skills the PM needs for handling conflict, and the various ways of setting up the project within the organization’s reporting structure (including how different ways of organizing projects tend to create different problems for PMs and their teams). Part II, Project Planning then moves into the project planning process starting with the major tools used in project planning. This is followed by project budgeting, project scheduling, and finally, resource allocation among the activities. Part III, Project Execution finally gets into the action, beginning with monitoring the activities, largely through information systems, and then controlling them to assure that the results meet expectations. Evaluating and possibly auditing the project at its major milestones or phase-gates is another, though separate, control action that senior management often employs, and last, the project must be terminated. We have relegated the discussion of two important aspects of projects that usually occur very early in the project life cycle—creativity/idea generation and technological forecasting— to the book’s website. Although few project managers engage in either of these tasks (typically being appointed to project leadership after these activities have taken place), we believe that a knowledge of these subjects will make the project manager more effective. Any way chosen to organize knowledge carries with it an implication of neatness and order that rarely occurs in reality. We are quite aware that projects almost never proceed in an orderly, linear way through the stages and events we describe here. The need to deal with change and uncertainty is a constant task for the project manager. We have tried to reflect this in repeated references to the organizational, interpersonal, economic, and technical glitches that create crises in the life cycle of every project, and thus in the life of every project manager. Finally, although we use a life-cycle approach to organization, the chapters include material concerning the major areas of the Project Management Body of Knowledge (PMBOK®) as defined by the Project Management Institute. (See Bibliography for Chapter 1.) Anyone wishing to prepare thoroughly in some of these areas may have to go beyond the information covered in this text.
PEDAGOGY Because this book is primarily a textbook, we have included numerous pedagogical aids to foster this purpose. As in earlier editions, short summaries appear at the end of the text of each chapter, followed by glossaries defining key terms and concepts introduced in the chapter. End-of-chapter materials also include review questions and problems revisiting the materials covered in the chapter. The answers (though not the detailed solutions) to the evennumbered problems are on the book’s Web site. There are also sets of conceptual discussion questions intended to broaden the students’ perspectives and to force them to think beyond the chapter materials to its implications. Finally, there are questions covering the Project Management in Practice application examples located throughout the chapters.
fpref.indd 7
10/10/08 5:17:04 PM
viii Preface As in the past, we include incidents for discussion, which are brief “caselettes” oriented primarily toward the specific subjects covered in the chapter, but sometimes allow use of materials and concepts covered in earlier chapters. New to this edition is a continuing integrative class project to respond to requests from users for some type of running case throughout the chapters that builds on the chapter materials as students progress through the book. And at the end of each chapter we offer a reading and/or a case, with questions concerning the reading and/or case at the end. We have noticed that many undergraduate introductory courses, and even a few such graduate courses, have no prerequisites. We feel individuals beginning their education in the management of projects would profit with some background knowledge. Thus, in writing this text we have made some assumptions about both student and professional readers. First, we assume that all readers have taken an elementary course in management or have had equivalent experience. The reader with a background in management theory or practice will note that many of the principles of good project management are also principles of good general administrative management. Project management and administrative management are not entirely distinct. Further, we assume that readers are familiar with the fundamental principles of accounting, behavioral science, finance, and statistics as would be a typical manager. Because the assumption concerning statistics is not always met, we include Appendix A on the Web site (http://www.wiley.com/college/meredith). This appendix on probability and statistics serves as an initial tutorial or as a refresher for rusty knowledge.
WHAT’S NEW In this edition, we have made a great many small updates, additions, and changes, including dropping the case in the conflict/negotiation chapter (which no one seemed to use) and adding one in the auditing/evaluation chapter, which many requested. We also dropped the project management software reading in the information systems chapter since software reviews are never up to date. As noted above, we also reorganized the structure of the text slightly by regrouping the chapters, and moving the conflict/negotiation chapter to earlier in the book. also new is the continuing integrative class project at the end of every chapter, as noted above. The largest change however is probably the attempt to simplify our writing style, eliminating many of the references to additional ways to address some of the issues, references to the thoughts of other practitioners and researchers, and references to opposing points of view. We hope that this will not only eliminate confusion on the part of students but will also simplify their understanding of the basic material—it also helps in reducing the length and cost of the book, of course. When we started writing the first edition of this book around 1980—the first “textbook” in the field—there weren’t all that many publications addressing project management, so we tried to document and describe all of them. Over the decades however, we were overwhelmed but still tried to note in the appropriate chapters the major new publications in the field—books, articles, etc. The purpose of doing so is, of course, to give the student recourse to additional explanation and discussion, or opposing points of view, or alternative ways of achieving the same objective. However, given the tsunami of interest, and publications, in the area since 1980, we have concluded that we must be much more selective, so have tried to cut back substantially in this edition, and will probably do more in the future as well. As before, a student version of Crystal Ball®, an Excel® add-in, again comes with the book. This software makes simulation reasonably straightforward and not particularly complicated. The use of simulation as a technique for risk analysis is demonstrated in several ways in different chapters. (Because relatively few students are familiar with simulation software, step-by-step instruction is included in the text.) Microsoft Project® has become the dominant application software in the field, outselling its closest competitor about 4 to 1. As with the last edition, a free trial version of Microsoft
fpref.indd 8
10/10/08 5:17:04 PM
preface
ix
Project® is included with every copy of the book. Our coverage of software tends, therefore, to be centered on Microsoft Project® (and on Crystal Ball®), but includes a brief discussion of the many “add-ons” that are now available to supplement Microsoft Project® and its competitors. Because the various versions of Microsoft Project® are quite similar in the way that they perform most of the basic tasks of project management, we generally do not differentiate between the versions, referring to any and all simply as Microsoft Project (MSP). We have also added some exercises to the end-of-chapter material that can utilize computer software. Similar materials are also available on the website. Another option now available to educational institutions adopting this Wiley textbook is a free 3-year membership to the MSDN Academic Alliance. The MSDN AA is designed to provide the easiest and most inexpensive way for academic departments to make the latest Microsoft software available in labs, classrooms, and on student PCs. Microsoft Project 2007 software is available through this Wiley and Microsoft publishing partnership, free of charge with the adoption of any qualified Wiley textbook. Each copy of Microsoft Project is the full version of the software, with no time limitations, and can be used indefinitely for educational purposes. (The second and subsequent years of a department’s MSDN AA membership is $399 and may be collected from students via lab fees.) Contact your Wiley sales rep for details. For more information about the MSDN AA program, go to http://msdn.microsoft.com/academic/. There is, of course, the danger that human nature, operating in its normal discreet mode, will shift the task of learning project management to that of learning project management software. Projects have often failed because the project manager started managing the software instead of the project. Instructors need to be aware of the problem and must caution students not to fall into this trap. Of course, we have also updated and extended the end-of-chapter pedagogical material. We have updated the bibliographies, added additional questions, added new incidents, added some problems (including some now in the Budgeting chapter), and added more cost definitions to the glossary in the Budgeting chapter. In response to queries about the cases at the end of the chapters, these typically integrate materials from previous chapters rather than focusing solely on the content of the chapter where they are placed, though that will be their primary focus.
ONLINE SUPPLEMENTS The Instructor’s Resource Guide on the Web site www.wiley.com/college/meredith provides additional assistance to the project management instructor. In addition to the answers/solutions to the problems, questions, readings, and cases, this edition includes teaching tips, a computerized test bank, additional cases, and PowerPoint slides. All of these valuable resources are available online (http://www.wiley.com/college/meredith). In addition, the student Web site contains Web quizzes, PowerPoint® slides, Appendix A: Probability and Statistics, Appendix B: answers to the Even-Numbered Problems, Creativity and Idea Generation, Technological Forecasting, a Glossary, and a Microsoft Project Manual.
ACKNOWLEDGMENTS We owe a debt of gratitude to all those who have helped us with this book. First, we thank the managers and students who helped us solidify our ideas about proper methods for managing projects and proper ways of teaching the subject. Second, we thank the project teams and leaders in all of our project management classes. We are especially grateful to Margaret Sutton and Scott Shafer whose creative ideas, extensive skills with software, and ability to
fpref.indd 9
10/10/08 5:17:05 PM
Preface sniff out inconsistencies saved us countless hours of fumbling and potential embarrassment. Last, but never least, we thank Suzanne Ingrao/Ingrao Associates, editor nonpareil and Joyce Franzen/GGS Book Services PMG for seemingly effortless production. Special thanks are due those who have significantly influenced our thinking about project management or supplied materials to help us write this book: Jeffrey Camm, James Evans, Martin Levy, John McKinney and William Meyers, all of the Univ. of Cincinnati; Larry Crowley, Auburn Univ.; Jeffrey Pinto, Pennsylvania State Univ. at Erie; Gerhard Rosegger, Case Western Reserve Univ.; Stephen Wearne, Univ. of Manchester; and the Staff of the Project Management Institute. We give a special thank you to Ronny Richardson, Southern Polytech. State Univ.; Dwayne Whitten, Texas A&M Univ.; and Bil Matthews, William Patterson University who authored and /or carefully checked the supplements to this edition. We owe a massive debt of gratitude to the reviewers for previous editions: Kwasi AmoakoGyampah, Univ. of North Carolina, Greensboro; Nicholas Aquilano, Univ. of Arizona; Bob Ash, Indiana Univ., Southeast; Bud Baker, Wright State Univ.; Robert J. Berger, Univ. of Maryland; William Brauer, Bemidji State Univ.; Maj. Mark D. Camdle, Air Force Inst. of Tech.; Howard Chamberlin, Texas A&M Univ.; Chin-Sheng Chen, Florida International Univ.; Denis Cioffi, George Washington Univ.; Desmond Cook, Ohio State Univ.; Edward Davis, Univ. of Virginia; Burton Dean, San Jose State Univ.; Michael H. Ensby, Clarkson Univ.; Richard E. Gunther, Cali fornia State Univ., Northridge; William Hayden, Jr., SUNY, Buffalo; Jane E. Humble, Arizona State Univ.; Richard H. Irving, York Univ.; Roderick V. James, DeVry Univ.; David L. Keeney, Stevens Inst. of Tech.; Ted Klastorin, Univ. of Washington; David Kukulka, Buffalo State Univ.; William Leban, DeVry Univ.; Sara McComb, Univ. of Massachusetts, Amherst; Abe Meilich, Walden Univ.; Jaindeep Motwani, Grand Valley State Univ.; Barin Nag, Towson Univ.; John E. Nicolay, Jr., Univ. of Minnesota; David L. Overbye, De Vry Univ.; David J. Robb, Univ. of Calgary; Arthur C. Rogers, City Univ., Washington; Thomas Schuppe, Milwaukee School of Engineering; John Shanfi, DeVry Inst. of Tech., Irving, TX; Wade Shaw, Florida Inst. of Tech.; Richard V. Sheng, DeVry Inst. of Tech., San Marino, CA; Bill Sherrard, San Diego State Univ.; Joyce T. Shirazi, Univ. of Maryland, Univ. College; Gene Simons, Rensselaer Polytech. Inst.; Herbert Spirer, Univ. of Connecticut; Eric Sprouls, Univ. of Southern Indiana; Peter Strunk, Univ. of Cincinnati; Samuel Taylor, Univ. of Wyoming; Tony Trippe, Rochester Inst. of Tech.; Jerome Weist, Univ. of Utah; William G. Wells, Jr., The George Washington Univ.; James Willman, Univ. of Bridgeport and Charles I. Zigelman, San Diego State Univ. For this edition, we thank reviewers Steve Allen, Truman State Univ.; Robert Bergman, Univ. of Houston; Susan Cholette, San Francisco Univ.; Mike Ensby, Clarkson Univ.; Abel Fernandez, Univ. of the Pacific; Homayoun Kahmooshi, George Washington Univ.; Young Hoon Kway, George Washington Univ.; Ardeshir Lohrasbi, Univ. of Illinois, Springfield; Mary Meixell, Quinnipiac Univ.; Jaideep Motwani, Grand State Valley Univ.; Pat Penfield, Syracuse Univ.; Ed. Pohl, Univ. of Arkansas; Michael Poli, Stevens Inst. of Tech.; Amit Raturi, Univ. of Cincinnati; Ronnie Richardson, Southern Polytech. State Univ.; David Russo, Univ. of Texas, Dallas; Boong-Yeol Ryoo, Florida International Univ.; Ruth Seiple, Univ. of Cincinnati; Chris Simber, Stevens Inst. of Tech.; Susan Williams, Northern Arizona State Univ. Jack Meredith Broyhill Distinguished Scholar and Chair in Operations Wake Forest University, P.O. Box 7659 Winston-Salem, NC 27109 [emailprotected] www.mba.wfu.edu
fpref.indd 10
Samuel J. Mantel, Jr., Joseph S. Stern Professor Emeritus of Operations Management University of Cincinnati 608 Flagstaff Drive Cincinnati, OH 45215 [emailprotected]
10/10/08 5:17:05 PM
Contents
Chapter 1 Projects in Contemporary Organizations 1
1.1 The Definition of a “Project” 9 1.2 Why Project Management? 12 1.3 The Project Life Cycle 14 1.4 The Structure of This Text 18 PROJECT MANAGEMENT IN PRACTICE The Olympic Torch Relay Project 12 Demolishing San Francisco’s Bridges Safely 19 DIRECTED READING: Lessons for an Accidental Profession 26
PROJECT INITIATION 35 Chapter 2 Strategic Management and Project Selection 37
2.1 Project Management Maturity 39 2.2 Project Selection and Criteria of Choice 40 2.3 The Nature of Project Selection Models 42 2.4 Types of Project Selection Models 44 2.5 Analysis under Uncertainty—The Management of Risk 58 2.6 Comments on the Information Base for Selection 70 2.7 Project Portfolio Process 72 2.8 Project Proposals 80 PROJECT MANAGEMENT IN PRACTICE Implementing Strategy through Projects at Blue Cross/Blue Shield 39 Project Selection for Spent Nuclear Fuel Cleanup 50 Simulating the Failure of California’s Levees 61 Using a Project Portfolio to Achieve 100% On-Time Delivery at Décor Cabinets 73 CASE: Pan Europa Foods S.A. 88 DIRECTED READING: From Experience: Linking Projects to Strategy 96
xi
ftoc.indd 11
10/10/08 5:17:20 PM
xii Contents Chapter 3 The Project Manager 107
3.1 Project Management and the Project Manager 109 3.2 Special Demands on the Project Manager 115 3.3 Selecting the Project Manager 127 3.4 Problems of Cultural Differences 130 3.5 Impact of Institutional Environments 134 3.6 Multicultural Communications and Managerial Behavior 140 PROJECT MANAGEMENT IN PRACTICE The Project Management Career Path at AT&T 114 A Surprise “Director of Storm Logistics” for Katrina 116 The Wreckmaster at a New York Subway Accident 124 Success at Energo by Integrating Two Diverse Cultures 133 Project Management in Brazil during Unstable Times 137 CASE: The National Jazz Hall of Fame 150 DIRECTED READING: What It Takes to Be a Good Project Manager 157 Chapter 4 Negotiation and the Management of Conflict 161
4.1 The Nature of Negotiation 164 4.2 Partnering, Chartering, and Scope Change 165 4.3 Conflict and the Project Life Cycle 169 4.4 Some Requirements and Principles of Negotiation 176 PROJECT MANAGEMENT IN PRACTICE Selling New Area Codes to Consumers Who Don’t Want Them 162 A Consensus Feasibility Study for Montreal’s Archipel Dam 175 Negotiation in Action—The Quad Sensor Project 178 DIRECTED READING: Methods of Resolving Interpersonal Conflict 183 Chapter 5 The Project in the Organizational Structure 189
5.1 The Project as Part of the Functional Organization 191 5.2 Pure Project Organization 194 5.3 The Matrix Organization 196 5.4 M ixed Organizational Systems 201 5.5 Choosing an Organizational Form 202 5.6 Two Special Cases—Risk Management and The Project Office 205 5.7 The Project Team 213 5.8 Human Factors and the Project Team 217 PROJECT MANAGEMENT IN PRACTICE Reorganizing for Project Management at Prevost Car 193 Trinatronic, Inc. 204 Risk Analysis vs. Budget/Schedule Requirements in Australia 206 A Project Management Office Success for the Transportation Security Administration 210 The Empire Uses Floating Multidisciplinary Teams 216 South African Repair Success through Teamwork 221
ftoc.indd 12
10/10/08 5:17:21 PM
contents
xiii
CASE: Oilwell Cable Company, Inc. 227 DIRECTED READING: The Virtual Project: Managing Tomorrow’s Team Today 230
Project Planning 237 Chapter 6 Project Activity Planning 239
6.1 Initial Project Coordination and the Project Plan 242 6.2 Systems Integration 251 6.3 The Action Plan 252 6.4 The Work Breakdown Structure and Linear Responsibility Chart 261 6.5 Interface Coordination through Integration Management 267 PROJECT MANAGEMENT IN PRACTICE Beagle 2 Mars Probe a Planning Failure 240 Child Support Software a Victim of Scope Creep 244 Shanghai Unlucky with Passengers 246 Minnesota DOT Project Planning 250 Disaster Project Planning in Iceland 260 CASE: A Project Management and Control System for Capital Projects 277 DIRECTED READING: Planning for Crises in Project Management 286 Chapter 7 Budgeting and Cost Estimation 293
7.1 Estimating Project Budgets 294 7.2 Improving the Process of Cost Estimation 305 PROJECT MANAGEMENT IN PRACTICE Pathfinder Mission to Mars—on a Shoestring 294 Managing Costs at Massachusetts’ Neighborhood Health Plan 300 Completing the Limerick Nuclear Facility Under Budget 306 The Emanon Aircraft Corporation 313 CASE: Automotive Builders, Inc.: The Stanhope Project 322 DIRECTED READING: Three Perceptions of Project Cost 327 Chapter 8 Scheduling 333
8.1 Background 333 8.2 Network Techniques: PERT (ADM) and CPM (PDM) 337 8.3 Risk Analysis Using Simulation with Crystal Ball® 365 8.4 Using these Tools 371 PROJECT MANAGEMENT IN PRACTICE Replacing the Atigun Section of the TransAlaska Pipeline 335 Hosting the Annual Project Management Institute Symposium 362 CASE: The Sharon Construction Corporation 381
ftoc.indd 13
10/10/08 5:17:21 PM
xiv Contents Chapter 9 Resource Allocation 383
9.1 Critical Path Method—Crashing a Project 385 9.2 The Resource Allocation Problem 392 9.3 Resource Loading 394 9.4 Resource Leveling 397 9.5 Constrained Resource Scheduling 402 9.6 Multiproject Scheduling and Resource Allocation 408 9.7 Goldratt’s Critical Chain 415 PROJECT MANAGEMENT IN PRACTICE Expediting Los Angeles Freeway Repairs after the Earthquake 384 Architectural Associates, Inc. 387 Benefit/Cost Analysis Saves Chicago’s Deep Tunnel Project 393 Benefits of Resource Constraining at Pennsylvania Electric 407 CASE: D.U. Singer Hospital Products Corp. 428
Project Execution 433 Chapter 10 Monitoring and Information Systems 435
10.1 The Planning-Monitoring-Controlling Cycle 436 10.2 Information Needs and Reporting 444 10.3 Earned Value Analysis 450 10.4 C omputerized PMIS (Project Management Information Systems) 462 PROJECT MANAGEMENT IN PRACTICE Using Project Management Software to Schedule the Olympic Games 436 Drug Counseling Program 442 Tracking Scope Creep: A Project Manager Responds 445 Success through Earned Value at Texas Instruments 460 CASE: The Project Manager/Customer Interface 470 Chapter 11 Project Control 475
11.1 The Fundamental Purposes of Control 477 11.2 Three Types of Control Processes 479 11.3 The Design of Control Systems 488 11.4 Control: A Primary Function of Management 496 11.5 Control of Change and Scope Creep 501 PROJECT MANAGEMENT IN PRACTICE Extensive Controls for San Francisco’s Metro Turnback Project 480 Schedule and Cost Control for Australia’s New Parliament House 494 Major Scope Creep in Boston’s “Big Dig” 502 Better Control of Development Projects at Johnson Controls 505 CASE: Peerless Laser Processors 510 DIRECTED READING: Controlling Projects According to Plan 515
ftoc.indd 14
10/10/08 5:17:22 PM
contents
xv
Chapter 12 Project Auditing 521
12.1 Purposes of Evaluation—Goals of the System 522 12.2 The Project Audit 524 12.3 Construction and Use of the Audit Report 528 12.4 The Project Audit Life Cycle 530 12.5 Some Essentials of an Audit/Evaluation 533 12.6 Measurement 536 PROJECT MANAGEMENT IN PRACTICE Lessons from Auditing 110 Client/Server and Open Systems Projects 525 Auditing a Troubled Project at Atlantic States Chemical Laboratories 531 CASE: Theater High Altitude Area Defense (thaad): Five Failures and Counting (B) 541 DIRECTED READING: An Assessment of Postproject Reviews 544 Chapter 13 Project Termination 551
13.1 The Varieties of Project Termination 552 13.2 When to Terminate a Project 555 13.3 The Termination Process 561 13.4 The Final Report—A Project History 566 13.5 A Final Note 568 PROJECT MANAGEMENT IN PRACTICE Nucor’s Approach to Termination by Addition 554 Terminating the Superconducting Super Collider Project 560 Photo Credits 573 Name Index 575 Subject Index 580
Please visit http://www.wiley.com/college/meredith for Appendices. A: Probability and Statistics and Appendix B: Answers to the EvenNumbered Problems.
ftoc.indd 15
10/10/08 5:17:22 PM
ftoc.indd 16
10/10/08 5:17:22 PM
C
H
A
P
T
E
R
1 Projects in Contemporary Organizations
The past several decades have been marked by rapid growth in the use of project management as a means by which organizations achieve their objectives. In the past, most projects were external to the organization—building a new skyscraper, designing a commercial ad campaign, launching a rocket—but the growth in the use of projects lately has primarily been in the area of projects internal to organizations: developing a new product, opening a new branch, improving the services provided to customers. As exhilarating as outside projects are, successfully executing internal projects is even more satisfying in that the organization has substantially improved its ability to execute more efficiently, effectively, or quickly, resulting in an agency or business that can even better contribute to society while simultaneously enhancing its own competitive strength. Project management provides an organization with powerful tools that improve its ability to plan, implement, and control its activities as well as the ways in which it utilizes its people and resources. It is popular to ask, “Why can’t they run government the way I run my business?” In the case of project management, however, business and other organizations learned from government, not the other way around. A lion’s share of the credit for the development of the techniques and practices of project management belongs to the military, which faced a series of major tasks that simply were not achievable by traditional organizations operating in traditional ways. The United States Navy’s Polaris program, NASA’s Apollo space program, and more recently, the space shuttle and the development of “smart” bombs and missiles are a few of the many instances of the application of these specially developed management approaches to extraordinarily complex projects. Following such examples, nonmilitary government sectors, private industry, public service agencies, and volunteer organizations have all used project management to increase their effectiveness. Most firms in the computer software business routinely develop their output as projects or groups of projects. Project management has emerged because the characteristics of our contemporary society demand the development of new methods of management. Of the many forces involved, three are paramount: (1) the exponential expansion of human knowledge; (2) the growing demand for a broad range of complex, sophisticated, customized goods and services; and (3) the evolution of worldwide competitive markets for the production and consumption of goods
1
81721_Ch01.indd 1
9/16/08 5:02:18 PM
2
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
and services. All three forces combine to mandate the use of teams to solve problems that used to be solvable by individuals. These three forces combine to increase greatly the complexity of goods and services produced plus the complexity of the processes used to produce them. This, in turn, leads to the need for more sophisticated systems to control both outcomes and processes.
Forces Fostering Project Management First, the expansion of knowledge allows an increasing number of academic disciplines to be used in solving problems associated with the development, production, and distribution of goods and services. Second, satisfying the continuing demand for more complex and customized products and services depends on our ability to make product design an integrated and inherent part of our production and distribution systems. Third, worldwide markets force us to include cultural and environmental differences in our managerial decisions about what, where, when, and how to produce and distribute output. The requisite knowledge does not reside in any one individual, no matter how well educated or knowledgeable. Thus, under these conditions, teams are used for making decisions and taking action. This calls for a high level of coordination and cooperation between groups of people not particularly used to such interaction. Largely geared to the mass production of simpler goods, traditional organizational structures and management systems are simply not adequate to the task. Project management is. The organizational response to the forces noted above cannot take the form of an instantaneous transformation from the old to the new. To be successful, the transition must be systematic, but it tends to be slow and tortuous for most enterprises. Accomplishing organizational change is a natural application of project management, and many firms have set up projects to implement their goals for strategic and tactical change. Another important societal force is the intense competition among institutions, both profit and not-for-profit, fostered by our economic system resulting in organizational “crusades” such as “total quality control,” “supply chain management,” and particularly prominent these days: “Six-sigma*.” The competition that all of these crusades engenders puts extreme pressure on organizations to make their complex, customized outputs available as quickly as possible. “Time-to-market” is critical. Responses must come faster, decisions must be made sooner, and results must occur more quickly. Imagine the communications problems alone. Information and knowledge are growing explosively, but the time permissible to locate and use the appropriate knowledge is decreasing. In addition, these forces operate in a society that assumes that technology can do anything. The fact is, this assumption is reasonably true, within the bounds of nature’s fundamental laws. The problem lies not in this assumption so much as in a concomitant assumption that allows society to ignore both the economic and noneconomic costs associated with technological progress until some dramatic event focuses our attention on the costs (e.g., the Chernobyl nuclear accident, the Exxon Valdez oil spill, or the possibility of global warming). At times, our faith in technology is disturbed by difficulties and threats arising from its careless implementation, as in the case of industrial waste, but on the whole we seem remarkably tolerant of technological change. For a case in point, consider California farm workers who waited more than 20 years to challenge a University of California research program devoted to the development of labor-saving farm machinery *Six-sigma (see Pande et al., 2000; Pyzdek, 2003) itself involves projects, usually of a process improvement type that involves the use of many project management tools (Chapter 8), teamwork (Chapters 5 and 12), quality tools such as “benchmarking” (Chapter 11), and even audits (Chapter 12).
81721_Ch01.indd 2
9/16/08 5:02:19 PM
PROJECTS IN CONTEMPORARY ORGANIZATIONS
3
(Sun, 1984). The acceptance of technological advancement is so strong it took more than two decades to muster the legal attack. Consider also the easy acceptance of communication by e-mail and shopping on the Internet. Finally, the projects we undertake are large and getting larger. The modern advertising company, for example, advances from blanket print ads to regionally focused television ads to personally focused Internet ads. As each new capability extends our grasp, it serves as the base for new demands that force us to extend our reach even farther. Projects increase in size and complexity because the more we can do, the more we try to do. The projects that command the most public attention tend to be large, complex, multidisciplinary endeavors. Often, such endeavors are both similar to and different from previous projects with which we may be more or less familiar. Similarities with the past provide a base from which to start, but the differences imbue every project with considerable risk. The complexities and multidisciplinary aspects of projects require that many parts be put together so that the prime objectives—performance, time (or schedule), and cost—are met.
Three Project Objectives While multimillion-dollar, five-year projects capture public attention, the overwhelming majority of all projects are comparatively small—though nonetheless important to doer and user alike. They involve outcomes, or deliverables, such as a new floor for a professional basketball team, a new insurance policy to protect against a specific casualty loss, a new Web site, a new casing for a four-wheel-drive minivan transmission, a new industrial floor cleanser, the installation of a new method for peer-review of patient care in a hospital, even the development of new software to help manage projects. The list could be extended almost without limit. These undertakings have much in common with their larger counterparts. They are complex, multidisciplinary, and have the same general objectives—performance (or scope), time, and cost. We refer to these as “direct” project objectives or goals. There is a tendency to think of a project solely in terms of its outcome—that is, its performance. But the time at which the outcome is available is itself a part of the outcome, as is the cost entailed in achieving the outcome. The completion of a building on time and on budget is quite a different outcome from the completion of the same physical structure a year late or 20 percent over budget, or both. Indeed, even the concept of performance or scope is more complex than is apparent. Much has been written in recent years arguing that, in addition to time, cost, and specifications, there is a fourth dimension to be considered. This fourth dimension is the expectations of the client (see Darnell, 1997), which sometimes tend to increase as the project progresses, known as “scope creep” (see Chapter 11). One might say that the expectations of the client are not an additional target, but an inherent part of the project specifications. However, to consider the client’s desires as different from the project specifications is to court conflict between client and project team, each of whom has unique ideas about the deliverables’ nature. Also, to separate client desires from project specifications creates conflict because client and team rarely act in concert. The client specifies a desired outcome. Then the project team designs and implements the project. Then the client views the result of the team’s ideas. Despite this logic, differences between the client’s expectations and the project team’s designs are common. As a result, meeting the client’s desires may not be well reflected by the specified performance of the project. The expectations of client and project team should be aligned and integrated throughout the entire project, but rarely are. As a result of the above, we include the nebulous elements of the client’s expectations and desires along with the “specified” performance, as stated in the project proposal, as the total “required performance” objective for the project. The three direct project objectives are
81721_Ch01.indd 3
9/16/08 5:02:19 PM
4
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS Performance Required performance
Target Cost Budget limit
Due date
Time (“schedule”)
Figure 1-1 cost, time.
Direct project goals—performance,
shown in Figure 1-1, with the specified project objectives on the axes. This illustration implies that there is some “function” that relates them, one to another—and so there is! Although the functions vary from project to project, and from time to time for a given project, we will refer to these relationships, or trade-offs, throughout this book. The primary task of the project manager is to manage these trade-offs, along with a fourth, unspecified trade-off that always exists between the direct project objectives/goals and a set of ancillary (or process) objectives/goals. In a more basic sense, those with a stake in the project (the project manager, project team, senior management, the client, and other project stakeholders) have an interest in making the project a success. In a thorough, empirical research study that we will consider in more detail in Chapter 12, Shenhar et al. (1997) have concluded that project success has four dimensions: (1) project efficiency, (2) impact on the customer, (3) the business impact on the organization, and (4) opening new opportunities for the future. The first two are clearly part of what we have defined as the project’s direct objectives, the latter two are also specific objectives of the project and are thus direct goals. Ancillary goals include improving the organization’s project management competency and methods, individuals’ increased managerial experience gained through project management, and similar goals. One other crucial, but unstated, element of ancillary trade-offs that a PM must consider is the health of the project team as well as the rest of the organization. The PM cannot burn out the team in an attempt to achieve the direct objectives, nor destroy the organization’s functional departments in an attempt to meet the project’s direct goals. Another ancillary element is the project’s environment, that is, those things or persons outside the project, and often outside the sponsoring organization, that affect the project or are affected by it. Examples of this environment might be antipollution groups, trade unions, competitive firms, and the like. We will deal with these issues in more detail in Chapter 12. From the early days of project management, the direct project objectives of time, cost, and performance (as generally agreed to by the client and the organization actually doing the project) have been accepted as the primary determinants of project success or failure. In the past 25 years or so, other direct and ancillary objectives have been suggested. These did not replace the traditional time, cost, and performance, but were added as also relevant. For the most part, however, Chapters 1–11 will focus mainly on the traditional direct objectives.
81721_Ch01.indd 4
9/16/08 5:02:19 PM
PROJECTS IN CONTEMPORARY ORGANIZATIONS
5
The Project Manager
PMBOK Guide
While managing the trade-offs, the project manager (PM) is expected to integrate all aspects of the project, ensure that the proper knowledge and resources are available when and where needed, and above all, ensure that the expected results are produced in a timely, cost-effective manner. The complexity of the problems faced by the PM, taken together with the rapid growth in the number of project-oriented organizations, has contributed to the professionalization of project management. One of the major international organizations dedicated to this professionalization is the Project Management Institute (PMI®, at www.pmi.org), established in 1969. By 1990, the PMI had 7,500 members. Five years later, it had grown to over 17,000, and by the end of 2007 it had exploded to over 260,000 members in more than 171 countries (see Figure 1-2). This exponential growth is indicative of the rapid growth in the use of projects, but also reflects the importance of the PMI as a force in the development of project management as a profession. Its mission is to foster the growth of project management as well as “building professionalism” in the field. The Project Management Journal and PM Network magazines were founded by the PMI to communicate ideas about project management, as well as solutions for commonly encountered problems. Another PMI objective is to codify the areas of learning required for competent project management. This project management body of knowledge, PMBOK®, is meant to serve as the fundamental basis for education for project managers (Project Management Institute, 2004). To certify that active project managers understood and could utilize this body of knowledge, PMI initiated a certificate of proficiency called the Project Management Professional (PMP®) that includes a group of education, experience, and testing requirements to obtain. More recently, PMI has added two more certificates, one for advanced program managers, called the Program Management Professional (PgMP®), and another for developing project managers, the Certified Associate in Project Management (CAPM®), which has less educational and experience requirements. The profession has flourished, with the result that
160
PMI membership (1000)
140 120 100 80 60 40 20 0
81721_Ch01.indd 5
1970
1980
1990 Year
2000
Figure 1-2 Project Management Institute growth history.
9/16/08 5:02:19 PM
6
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
many colleges and universities offer training in project management and some offer specialized degree programs in the area. Clearly, rapid growth in the number of project managers and of the PMI membership were the result, not the cause, of tremendous growth in the number of projects being carried out. The software industry alone has been responsible for a significant percent of the growth. Another major source of growth has been the need to control project activity in large organizations. As the number of nonroutine activities increases in an organization, there is an increased need in senior management to understand and control the system. Project management, with its schedules, budgets, due dates, risk assessments, statements of expected outcomes, and people who take responsibility, is a way to meet this need. These forces have combined and led to the creation of a project-organized firm. Much more will be said about project-oriented organizations in Chapter 4. As we note in the coming chapters, the project manager’s job is not without problems. There is the ever-present frustration of being responsible for outcomes while lacking full authority to command the requisite resources or personnel. There are the constant problems of dealing with the parties involved in any project—senior management, client, project team, and public—all of whom seem to speak different languages and have different objectives. There are the ceaseless organizational and technical “fires to be fought.” There are vendors who cannot seem to keep “lightning-strike-me-dead” promises about delivery dates. This list of troubles only scratches the surface. Difficult as the job may be, most project managers take a considerable amount of pleasure and job satisfaction from their occupation. The challenges are many and the risks significant, but so are the rewards of success. Project managers usually enjoy organizational visibility, considerable variety in their day-to-day duties, and often have the prestige associated with work on the enterprise’s high-priority objectives. The profession, however, is not one for the timid. Risk and conflict avoiders do not make happy project managers. Those who can stomach the risks and enjoy practicing the arts of conflict resolution, however, can take substantial monetary and psychological rewards from their work.
Trends in Project Management Many new developments and interests in project management are being driven by quickly changing global markets, technology, and education. Global competition is putting pressure on prices, response times, and product/service innovation. Computer and telecommunications technologies along with greater education are allowing companies to respond to these pressures, pushing the boundaries of project management into regions where new tools are being developed for types of projects that have never been considered before. In addition, the pressure for more and more products and services has led to initiating more projects, but with faster life cycles. We consider a variety of trends in turn. Achieving Strategic Goals (Chapter 2, especially Section 2.7). There has been a greater push to use projects to achieve more strategic goals, and filtering existing major projects to make sure that their objectives support the organization’s strategy and mission. Projects that do not have clear ties to the strategy and mission are terminated and their resources are redirected to those that do. An example of this is given in Section 1.7 where the Project Portfolio Process is described. Achieving Routine Goals (Section 1.1). On the other hand, there has also been a push to use project management to accomplish routine departmental tasks that would previously have been handled as a functional effort. This is because lower level management has become aware that projects accomplish their performance objectives within their budget and deadline,
81721_Ch01.indd 6
9/16/08 5:02:20 PM
PROJECTS IN CONTEMPORARY ORGANIZATIONS
7
and hope to employ this new tool to improve management of their functions. As a result, artificial deadlines and budgets are created to accomplish specific, though routine, tasks within the functional departments, a process called “projectizing.” However, as reported by Jared Sandberg (Sandberg, 2007) in the Wall Street Journal, there is an important danger with this new tactic. If the deadline isn’t really important and the workers find out it is only artificial (e.g., either by meeting it but getting no appreciation or missing it but with no penalty), this will destroy the credibility of any future deadlines or budgets, much like “the boy who cried wolf.” Improving Project Effectiveness (Sections 2.1, 2.7, 4.6, 5.1, 5.5, 11.2, 11.3). A variety of efforts are being pursued to improve the results of project management, whether strategic or routine. One well-known effort is the creation of a formal Project Management Office (PMO, see Section 4.6) in many organizations, which is responsible for the successful initiation and completion of projects throughout the organization. Another effort is the evaluation of an organization’s project management “maturity,” or skill and experience in managing projects (discussed in Section 2.1). This is often one of the responsibilities of the PMO. Another responsibility of the PMO is to educate project managers about the ancillary goals of the organization (mentioned earlier in this chapter), which automatically become a part of the goals of every project whether the project manager knows it or not. Achieving better control over each project through the use of phase gates (Sections 5.1, 5.5, 11.2), earned value (Section 10.3), critical ratios (Section 11.3), and other such techniques is also a current trend. Virtual Projects (Sections 4.3, 10.2). With the rapid increase in globalization, many projects now involve global teams with team members operating in different countries and different time zones, each bringing a unique set of talents to the project. These are known as virtual projects because the team members may never physically meet before the team is disbanded and another team reconstituted. Advanced telecommunications and computer technologies allow such virtual projects to be created, conduct their work, and complete their project successfully. Quasi-Projects (Section 1.1). Led by the demands of the information technology/systems departments, project management is now being extended into areas where the final performance (or “scope”) requirements may not be understood, the time deadline unknown, and/or the budget undetermined. This ill-defined type of project (which we call a “quasi-project”) is extremely difficult to manage and is often initiated by setting an artificial due date and budget, and then completed by “de-scoping” the required performance to meet those limits. However, new tools for these kinds of quasi-projects are now being developed—prototyping, phasegating, and others—to help these teams achieve results that satisfy the customer in spite of all the unknowns.
Recent Changes in Managing Organizations In the two decades since the first edition of this book was published, the process of managing organizations has been impacted by three revolutionary changes. First, we have seen an accelerating replacement of traditional, hierarchical management by consensual management. Second, we are currently witnessing the adoption of the “systems approach” (sometimes called “systems engineering”) to deal with organizational or technological problems because it is abundantly clear that when we act on one part of an organization or system, we are certain to affect other parts. Third, we have seen organizations establishing projects as the preferred way to accomplish their goals. Examples vary from the hundreds of projects required to accomplish the “globalization” of a multibillion dollar household products firm to the incremental tailoring of products and services for individual customers. We elaborate on this tie between
81721_Ch01.indd 7
9/16/08 5:02:20 PM
8
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
the organization’s goals and the projects it selects for implementation in the following chapter. And as we will note in Chapter 4 and elsewhere, there has been a rapid and sustained growth in the number of organizations that use projects to accomplish almost all of the nonroutine tasks they undertake. While all three of these phenomena have been known for many years, it is comparatively recent that they have been widely recognized and practiced. In his fascinating book, Rescuing Prometheus (Hughes, 1998), technology historian Thomas Hughes examines four large-scale projects that required the use of a nontraditional management style, a nontraditional organizational design, and a nontraditional approach to problem solving in order to achieve their objectives. These huge projects—the Semiautomatic Ground Environment (SAGE) air defense system, the Atlas Intercontinental Ballistic Missile, the Boston Central Artery/Tunnel, and the Department of Defense Advanced Research Projects Agency’s Internet (ARPANET)—are all characterized by extraordinarily diverse knowledge and information input requirements.* The size and technological complexity of these projects required input from a large number of autonomous organizations—governmental, industrial, and academic—that usually did not work cooperatively with other organizations, were sometimes competitors, and could be philosophical and/or political opponents. Further, any actions taken to deal with parts of the total project often had disturbing impacts on many other parts of the system. Obviously, these projects were not the first complex, large-scale projects carried out in this country or elsewhere. For example, the Manhattan Project—devoted to the development of the atomic bomb—was such a project. The Manhattan Project, however, was the sole and full-time work for a large majority of the individuals and organizations working on it. The organizations contributing to the projects Hughes describes were, for the most part, working on many other tasks. For example, Massachusetts Institute of Technology (MIT), the Pentagon, IBM, Bell Labs (now Lucent Technologies), RAND Corporation, the Massachusetts Department of Highways, and a great many other organizations were all highly involved in one or more of these projects while still carrying on their usual work. The use of multiple organizations (both within and outside of the sponsoring firm) as contributors to a project is no longer remarkable. Transdisciplinary projects are more the rule than the exception. These revolutions and modifications in the style of management and organization of projects will be reflected throughout this book. For example, we have come to believe that the use of a traditional, hierarchical management style rather than a consensual style to manage multiorganizational projects is a major generator of conflict between members of the project team. We have long felt, and are now certain, that staffing multidisciplinary projects with individuals whose primary focus is on a specific discipline rather than on the problem(s) embodied in the project will also lead to high levels of interpersonal conflict between project team members. In Chapter 4 we will discuss some issues involved in the widespread use of projects to accomplish organizational change. As in the first edition, we adopt a systems approach to dealing with the problems of managing projects. This book identifies the specific tasks facing PMs. We investigate the nature of the projects for which the PM is responsible, the skills that must be used to manage projects, and the means by which the manager can bring the project to a successful conclusion in terms of the three primary criteria: performance, time, and cost. Before delving into the details of this analysis, however, we clarify the nature of a project and determine how it differs from the other activities that are conducted in organizations. We also note a few of the major advantages, disadvantages, strengths, and limitations of project management. At this end of this chapter, we describe the approach followed throughout the rest of the book.
*Hughes’s term for this is “transdisciplinary” (across disciplines), which is rather more accurate than the usual “interdisciplinary” (between disciplines).
81721_Ch01.indd 8
9/16/08 5:02:20 PM
1.1
1.1
THE DEFINITION OF A “PROJECT”
9
THE DEFINITION OF A “PROJECT” The PMI has defined a project as “A temporary endeavor undertaken to create a unique product or service” (Project Management Institute, 2004, p. 5). There is a rich variety of projects to be found in our society. Although some may argue that the construction of the Tower of Babel or the Egyptian pyramids were some of the first “projects,” it is probable that cavemen formed a project to gather the raw material for mammoth stew. It is certainly true that the construction of Boulder Dam and Edison’s invention of the light bulb were projects by any sensible definition. Modern project management, however, is usually said to have begun with the Manhattan Project. In its early days, project management was used mainly for very large, complex research and development (R & D) projects like the development of the Atlas Intercontinental Ballistic Missile and similar military weapon systems. Massive construction programs were also organized as projects—the construction of dams, ships, refineries, and freeways, among others. As the techniques of project management were developed, mostly by the military, the use of project organization began to spread. Private construction firms found that project organization was helpful on smaller projects, such as the building of a warehouse or an apartment complex. Automotive companies used project organization to develop new automobile models. Both General Electric and Pratt & Whitney used project organization to develop new jet aircraft engines for airlines, as well as the Air Force. Project management has even been used to develop new models of shoes and ships (though possibly not sealing wax). More recently, the use of project management by international organizations, and especially organizations producing services rather than products, has grown rapidly. Advertising campaigns, global mergers, and capital acquisitions are often handled as projects, and the methods have spread to the nonprofit sector. Weddings, scout-o-ramas, fund drives, election campaigns, parties, and recitals have all made use of project management. Most striking has been the widespread adoption of project management techniques for the development of computer software. In discussions of project management, it is sometimes useful to make a distinction between terms such as project, program, task, and work packages. The military, source of most of these terms, generally uses the term program to refer to an exceptionally large, longrange objective that is broken down into a set of projects. These projects are divided further into tasks, which are, in turn, split into work packages that are themselves composed of work units. But exceptions to this hierarchical nomenclature abound. The Manhattan Project was a huge “program,” but a “task force” was created to investigate the many potential futures of a large steel company. In the broadest sense, a project is a specific, finite task to be accomplished. Whether large- or small-scale or whether long- or short-run is not particularly relevant. What is relevant is that the project be seen as a unit. There are, however, some attributes that characterize projects.
Importance The most crucial attribute of a project is that it must be important enough in the eyes of senior management to justify setting up a special organizational unit outside the routine structure of the organization. If the rest of the organization senses, or even suspects, that it is not really that important, the project is generally doomed to fail. The symptoms of lack of importance are numerous and subtle: no mention of it by top management, assigning the project to someone of low stature or rank, adding the project to the responsibilities of someone who is already too overworked, failing to monitor its progress, failing to see to its resource needs, and so on.
81721_Ch01.indd 9
9/16/08 5:02:21 PM
10
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
Performance A project is usually a one-time activity with a well-defined set of desired end results. (We discuss poorly defined, or “quasi-” projects a bit later.) It can be divided into subtasks that must be accomplished in order to achieve the project goals. The project is complex enough that the subtasks require careful coordination and control in terms of timing, precedence, cost, and performance. Often, the project itself must be coordinated with other projects being carried out by the same parent organization.
Life Cycle with a Finite Due Date Like organic entities, projects have life cycles. From a slow beginning they progress to a buildup of size, then peak, begin a decline, and finally must be terminated by some due date. (Also like organic entities, they often resist termination.) Some projects end by being phased into the normal, ongoing operations of the parent organization. The life cycle is discussed further in Section 1.3 where an important exception to the usual description of the growth curve is mentioned. There are several different ways in which to view project life cycles. These will be discussed in more detail later.
Interdependencies Projects often interact with other projects being carried out simultaneously by their parent organization. Typically, these interactions take the form of competition for scarce resources between projects, and much of Chapter 9 is devoted to dealing with these issues. While such interproject interactions are common, projects always interact with the parent organization’s standard, ongoing operations. Although the functional departments of an organization (marketing, finance, manufacturing, and the like) interact with one another in regular, patterned ways, the patterns of interaction between projects and these departments tend to be changeable. Marketing may be involved at the beginning and end of a project, but not in the middle. Manufacturing may have major involvement throughout. Finance is often involved at the beginning and accounting (the controller) at the end, as well as at periodic reporting times. The PM must keep all these interactions clear and maintain the appropriate interrelationships with all external groups.
Uniqueness Though the desired end results may have been achieved elsewhere, they are at least unique to this organization. Moreover, every project has some elements that are unique. No two construction or R & D projects are precisely alike. Though it is clear that construction projects are usually more routine than R & D projects, some degree of customization is a characteristic of projects. In addition to the presence of risk, as noted earlier, this characteristic means that projects, by their nature, cannot be completely reduced to routine. The PM’s importance is emphasized because, as a devotee of management by exception, the PM will find there are a great many exceptions to manage by.
Resources Projects have limited budgets, both for personnel as well as other resources. Often the budget is implied rather than detailed, particularly concerning personnel, but it is strictly limited. The attempt to obtain additional resources (or any resources) leads to the next attribute—conflict.
81721_Ch01.indd 10
9/16/08 5:02:21 PM
1.1
THE DEFINITION OF A “PROJECT”
11
Conflict More than most managers, the PM lives in a world characterized by conflict. Projects compete with functional departments for resources and personnel. More serious, with the growing proliferation of projects, is the project-versus-project conflict for resources within multiproject organizations. The members of the project team are in almost constant conflict for the project’s resources and for leadership roles in solving project problems. The PM must be expert in conflict resolution, but we will see later that there are helpful types of conflict. The PM must recognize the difference. The four parties-at-interest or “stakeholders” (client, parent organization, project team, and the public) in any project even define success and failure in different ways (see Chapters 12 and 13). The client wants changes, and the parent organization wants profits, which may be reduced if those changes are made. Individuals working on projects are often responsible to two bosses at the same time; these bosses may have different priorities and objectives. Project management is no place for the timid.
Nonprojects and Quasi-Projects If the characteristics listed above define a project, it is appropriate to ask if there are nonprojects. There are. The use of a manufacturing line to produce a flow of standard products is a nonproject. The production of weekly employment reports, the preparation of school lunches, the delivery of mail, the flight of Delta-1288 from Dallas to Dulles, checking your e-mail, all are nonprojects. While one might argue that each of these activities is, to some degree, unique, it is not their uniqueness that characterizes them. They are all routine. They are tasks that are performed over and over again. This is not true of projects. Each project is a one-time event. Even the construction of a section of interstate highway is a project. No two miles are alike and constructing them demands constant adaptation to the differences in terrain and substructure of the earth on which the roadbed is to be laid. Projects cannot be managed adequately by the managerial routines used for routine work. In addition to projects and nonprojects, there are also quasi-projects: “Bill, would you look into this?” “Judy, we need to finish this by Friday’s meeting.” “Can you find out about this before we meet with the customer?” Most people would consider that they have just been assigned a project, depending on who “we” and “you’’ is supposed to include. Yet there may be no specific task identified, no specific budget given, and no specific deadline defined. Are they still projects, and if so, can project management methods be used to manage them? Certainly! The performance, schedule, and budget have been implied rather than carefully delineated by the words “this,” “meet,” and “we” (meaning “you”) or “you” (which may mean a group or team). In such cases, it is best to try to quickly nail down the performance, schedule, and budget as precisely as possible, but without antagonizing the manager who assigned the project. You may need to ask for additional help or other resources if the work is needed soon—is it needed soon? How accurate/thorough/detailed does it need to be? And other such questions. One common quasi-project in the information systems area is where the project includes discovery of the scope or requirements of the task itself (and possibly also the budget and deadline). How can you plan a project when you don’t know the performance requirements? In this case, the project is, in fact, determining the performance requirements (and possibly the budget and deadline also). If the entire set of work (including the discovery) has been assigned to you as a project, then the best approach is to set this determination as the first “milestone” in the project, at which point the resources, budget, deadline, capabilities, personnel, and any other matters will be reviewed to determine if they are sufficient to the new project requirements. Alternatively, the customer may be willing to pay for the project on a “cost-plus” basis, and call a halt to the effort when the benefits no longer justify the cost.
81721_Ch01.indd 11
9/16/08 5:02:21 PM
12
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
Project Management in Practice The Olympic Torch Relay Project
Seattle Minneapolis Boston New York Chicago Denver Los Angeles
Atlanta Dallas New Orleans Miami
Getting the Olympic Flame, known as the Olympic Torch Relay, to the Salt Lake City, Utah, USA 2002 Olympic Games promised to be no simple matter. Generally, the Torch Relay has gotten longer and more complex with every Olympic event. This complexity is driven by the realization of host-country citizens that it is a rare opportunity to have the Olympic torch pass through your hometown and the corresponding goal of the Olympic Committee to touch as many lives as possible in a positive way. Planning for the 1996 Atlanta Olympic Torch Relay (see figure) took two years, cost over $20 million, and involved an 84 day, 42 state campaign using 10,000 runners to carry the torch for 15,000 miles! Accompanying the runners was a 40-vehicle caravan carrying security officers, media personnel, medical personnel, computers, telecommunications gear, clothing, food, and spare lanterns with extra flames in case the
1.2
original torch went out. The caravan included: 50 cellular telephones; 60 pagers; 120 radios; 30 cars; 10 motorcycles; and clothing for 10,000 runners, 10,000 volunteers, as well as 2,500 escort runners. However, the torch relay is also a major marketing campaign, primarily for the relay’s sponsors. Thus, accompanying the Atlanta-bound caravan were trucks hawking Olympic memorabilia: t-shirts, sweatshirts, baseball caps, tickets to the soccer matches, and on and on. In addition to retail commercialism, a number of companies were piggybacking on the torch relay to further their own commercial interests: IBM, Motorola, BellSouth, Texaco, BMW, Lee, Coca-Cola, and so on. All in all, a very successful relay! Source: G. Ruffenach, “Getting the Olympic Flame to Atlanta Won’t Be a Simple Cross-Country Run,” The Wall Street Journal, February 26, 1996.
WHY PROJECT MANAGEMENT? The basic purpose for initiating a project is to accomplish specific goals. The reason for organizing the task as a project is to focus the responsibility and authority for the attainment of the goals on an individual or small group. In spite of the fact that the PM often lacks authority
81721_Ch01.indd 12
9/16/08 5:02:21 PM
1.2
WHY PROJECT MANAGEMENT?
13
at a level consistent with his or her responsibility, the manager is expected to coordinate and integrate all activities needed to reach the project’s goals. In particular, the project form of organization allows the manager to be responsive to: (1) the client and the environment, (2) identify and correct problems at an early date, (3) make timely decisions about trade-offs between conflicting project goals, and (4) ensure that managers of the separate tasks that comprise the project do not optimize the performance of their individual tasks at the expense of the total project—that is, that they do not suboptimize. Actual experience with project management (such as through the currently popular Six-Sigma projects) indicates that the majority of organizations using it experience better control and better customer relations (Davis, 1974), and probably an increase in their project’s return on investment (Ibbs et al., 1997). A significant proportion of users also report shorter development times, lower costs, higher quality and reliability, and higher profit margins. Other reported advantages include a sharper orientation toward results, better interdepartmental coordination, and higher worker morale. On the negative side, most organizations report that project management results in greater organizational complexity. Many also report that project organization increases the likelihood that organizational policy will be violated—not a surprising outcome, considering the degree of autonomy required for the PM. A few firms reported higher costs, more management difficulties, and low personnel utilization. As we will see in Chapter 5, the disadvantages of project management stem from exactly the same sources as its advantages. The disadvantages seem to be the price one pays for the advantages. On the whole, the balance weighs in favor of project organization if the work to be done is appropriate for a project. The tremendous diversity of uses to which project management can be put has had an interesting, and generally unfortunate, side-effect. While we assert that all projects are to some extent unique, there is an almost universal tendency for those working on some specific types of projects to argue, “Software (or construction, or R & D, or marketing, or machine maintenance, or . . .) projects are different and you can’t expect us to schedule (or budget, or organize, or manage, or . . .) in the same way that other kinds of projects do.” Disagreement with such pleas for special treatment is central to the philosophy of this book. The fundamental similarities between all sorts of projects, be they long or short, product- or service-oriented, parts of all-encompassing programs or stand-alone, are far more pervasive than are their differences. There are also real limitations on project management. For example, the mere creation of a project may be an admission that the parent organization and its managers cannot accomplish the desired outcomes through the functional organization. Further, conflict seems to be a necessary side-effect. As we noted, the PM often lacks authority that is consistent with the assigned level of responsibility. Therefore, the PM must depend on the goodwill of managers in the parent organization for some of the necessary resources. Of course, if the goodwill is not forthcoming, the PM may ask senior officials in the parent organization for their assistance. But to use such power often reflects poorly on the skills of the PM and, while it may get cooperation in the instance at hand, it may backfire in the long run. We return to the subject of the advantages, disadvantages, and limitations of the project form of organization later. For the moment, it is sufficient to point out that project management is difficult even when everything goes well. When things go badly, PMs have been known to turn gray overnight and take to hard drink! The trouble is that project organization is the only feasible way to accomplish certain goals. It is literally not possible to design and build a major weapon system, for example, in a timely and economically acceptable manner, except by project organization. The stronger the emphasis on achievement of results in an organization, the more likely it will be to adopt some form of project management. The stake or risks in using project management may be high, but no more so than in any other form of management. And for projects, it is less so. Tough as it may be, it is all we have—and it works!
81721_Ch01.indd 13
9/16/08 5:02:22 PM
14
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
DILBERT: © Scott Adams/Dist. by United Feature Syndicate, Inc.
All in all, the life of a PM is exciting, rewarding, at times frustrating, and tends to be at the center of things in most organizations. Project management is now being recognized as a “career path” in a growing number of firms, particularly those conducting projects with lives extending more than a year or two. In such organizations, PMs may have to function for several years, and it is important to provide promotion potential for them. It is also common for large firms to put their more promising young managers through a “tour of duty” during which they manage one or more projects (or parts of projects). This serves as a good test of the aspiring manager’s ability to coordinate and manage complex tasks and to achieve results in a politically challenging environment where negotiation skills are required.
1.3
THE PROJECT LIFE CYCLE Most projects go through similar stages on the path from origin to completion. We define these stages, shown in Figure 1-3, as the project’s life cycle. The project is born (its start-up phase) and a manager is selected, the project team and initial resources are assembled, and the work program is organized. Then work gets under way and momentum quickly builds. Progress is made. This continues until the end is in sight. But completing the final tasks seems to take an inordinate amount of time, partly because there are often a number of parts that must come together and partly because team members “drag their feet” for various reasons and avoid the final steps. The pattern of slow-rapid-slow progress toward the project goal is common. Anyone who has watched the construction of a home or building has observed this phenomenon. For the most part, it is a result of the changing levels of resources used during the successive stages of the life cycle. Figure 1-4 shows project effort, usually in terms of person-hours or resources expended per unit of time (or number of people working on the project) plotted against time, where time is broken up into the several phases of project life. Minimal effort is required at the beginning, when the project concept is being developed and subjected to project selection processes. (Later, we will argue that increasing effort in the early stages of the life cycle will improve the chance of project success.) Normally there is a strong correlation between the life-cycle progress curve of Figure 1-3 and the effort curve of Figure 1-4 because effort usually results in corresponding progress (although not always). Hence the mathematical derivative of the former tends to resemble the latter (Cioffi, 2004). Moreover, since the effort curve is generally nonsymmetrical, the progress curve will in general not be symmetrical either. Activity increases as planning is completed and the real work of the project gets underway. This rises to a peak and then begins to taper off as the project nears completion, finally
81721_Ch01.indd 14
9/16/08 5:02:22 PM
1.3
THE PROJECT LIFE CYCLE
15
100
% Project completion
Slow finish
Quick momentum
Slow start
Figure 1-3 The project life cycle.
0 Time
Level of effort
Peak effort level
Time
Conception Selection
Planning, scheduling, monitoring, control
Evaluation and termination
Figure 1-4 Time distribution of project effort.
ceasing when evaluation is complete and the project is terminated. While this rise and fall of effort always occurs, there is no particular pattern that seems to typify all projects, nor any reason for the slowdown at the end of the project to resemble the buildup at its beginning. Some projects end without being dragged out, as is shown in Figure 1-4. Others, however, may be like T. S. Eliot’s world, and end “not with a bang but a whimper,” gradually slowing down until one is almost surprised to discover that project activity has ceased. In some cases, the effort may never fall to zero because the project team, or at least a cadre group, may be maintained for the next appropriate project that comes along. The new project will then rise, phoenix-like, from the ashes of the old. The ever-present goals of meeting performance, time, and cost are the major considerations throughout the project’s life cycle. It was generally thought that performance took
81721_Ch01.indd 15
9/16/08 5:02:22 PM
16
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
precedence early in the project’s life cycle. This is the time when planners focus on finding the specific methods required to meet the project’s performance goals. We refer to these methods as the project’s technology because they require the application of a science or art. When the major “how” problems are solved, project workers sometimes become preoccupied with improving performance, often beyond the levels required by the original specifications. This search for better performance delays the schedule and pushes up the costs. At the same time that the technology of the project is defined, the project schedule is designed and project costs are estimated. Just as it was thought that performance took precedence over schedule and cost early in the life cycle, cost was thought to be of prime importance during the periods of high activity, and then schedule became paramount during the final stages, when the client demanded delivery. This conventional wisdom turns out to be untrue. Recent research indicates that performance and schedule are more important than cost during all stages. The reality of time-cost-performance trade-offs will be discussed in greater detail in Chapter 3. Figure 1-3 presents the conventional view of the project life cycle. There are, however, many projects that have a life cycle quite different from the S-shaped Figure 1-3, conventional wisdom to the contrary. Remember that Figure 1-3 shows “percent project completion” as a function of “time.” The life-cycle function is essentially unchanged if, for the horizontal axis, we use “resources” instead. In effect, the life cycle shows what an economist might call “return on input,” that is, the amount of project completion resulting from inputs of time or resources. While the S-shaped return curve reflects reality on many projects, it is seriously misleading for others. For example, consider your progress toward getting a degree, which is usually specified, in large part, by the number of credit hours for courses successfully passed. For smooth progress toward the degree, the life-cycle “curve” would probably resemble a stairstep, each level portion representing a term of study and the step up representing completion of credit toward the degree. Summer vacation would, of course, be a longer level stair continuing into the fall term. Passing a crucial licensing exam, such as the Certified Public Accountant (CPA), the bar exam for attorneys, or even an electrician’s or plumber’s certification, might appear as a long flat line along the horizontal axis with a spike at the time of passing the exam; of course, the effort curve of Figure 1-4 would look completely different. Another type of life-cycle curve might be the installation of a new technology consisting of multiple parts, where each independent part resulted in different incremental benefits. In these cases, organizations prefer to install those parts resulting in “the biggest bang for the buck” first, so the resulting life-cycle curve would show great progress at first, and slightly less next, and continual dwindling off as the remaining parts were installed, essentially concave with “decreasing returns to scale,” as the economists call it. And there might even be an “inverse S-curve” representing fast progress at first, a slowdown in the middle, and then speeding up again at the end. A particularly important alternative life cycle shape can be captured by the analogy of baking a cake. Once the ingredients are mixed, we are instructed to bake the cake in a 350 (F) oven for 35 minutes. At what point in the baking process do we have “cake?” Experienced bakers know that the mixture changes from “goop” (a technical term well known to bakers and cooks) to “cake” quite rapidly in the last few minutes of the baking process. The life cycle of this process looks like the curve shown in Figure 1-5. A number of actual projects have a similar life cycle, for example, some computer software projects, or chemistry and chemical engineering projects. In general, this life cycle often exists for projects in which the output is composed or constructed of several subunits (or subroutines) that have little use in and of themselves, but are quite useful when put together. This life-cycle curve would also be typical for projects where a chemical-type reaction occurs that rapidly transforms the output from useless to useful—from goop to cake. Another example is the preparation of the manuscript for the current edition of this book. A great deal of information must be collected, a great deal of rewriting must be done and new materials gathered, but there is no visible result until everything is assembled.
81721_Ch01.indd 16
9/16/08 5:02:22 PM
% Project completion
1.3
THE PROJECT LIFE CYCLE
17
100
Time
Figure 1-5 Another possible project life cycle.
Figure 1-3 shows that, as the project nears completion, continued inputs of time or resources result in successively smaller increments of completion—diminishing marginal returns. Figure 1-5 shows the opposite. As these projects near completion, additional inputs result in successively larger increments of progress—increasing marginal returns, obviously bounded at 100 percent completion. In Chapter 7, we will see that the distinction between these types of life cycles plays a critical role in developing budgets and schedules for projects. It is not necessary for the PM to estimate the precise shape of the life-cycle curve, but the PM must know which type of project life cycle applies to the project at hand. There is another comparison between the two types of project life cycles that is instructive. For the S-shaped life cycle in Figure 1-3, percentage of project completion is closely correlated with cost, or the use of resources. In fact, this is the basis for the use of “earned value,” a technique for monitoring project progress that we will describe in more detail in Chapter 10. However, for the exponential progress curve in Figure 1-5, the expenditure of resources has little correlation with progress, at least in terms of final benefit. Finally, not only does the shape of the project life-cycle curve fail to conform to a neat, single shape—there are also several different ways in which a project life cycle can be viewed and understood. We might view the project life cycle as a control system, as a mechanism to control quality, as a way of organizing the management of risk, and as a collection of small projects within larger projects within still larger projects. Each of these views of a project’s life is useful to the project manager. These will be discussed in later chapters.
Risk During the Life Cycle It would be a great source of comfort if one could predict with certainty, at the start of a project, how the performance, time, and cost goals would be met. In a few cases, routine construction projects, for instance, we can generate reasonably accurate predictions, but often we cannot. There may be considerable uncertainty about our ability to meet project goals. The crosshatched portion of Figure 1-6 illustrates that uncertainty. Figure 1-6 shows the uncertainty as seen at the beginning of the project. Figure 1-7 shows how the uncertainty decreases as the project moves toward completion. From project start time, t0, the band of uncertainty grows until it is quite wide by the estimated end of the project. As the project actually develops, the degree of uncertainty about the final outcome is reduced. (See the estimate made at t1, for example.) A later forecast, made at t2, reduces the uncertainty further. It is common to make new forecasts about project performance, time, and cost either at fixed intervals in the life of the project or when specific technological milestones are reached. In any event, the more progress made on the project, the less uncertainty there is about achieving the final goal. Note that the focus in Figures 1-6 and 1-7 is on the uncertainty associated with project cost—precisely, the uncertainty of project cost at specific points in time. Without significantly
81721_Ch01.indd 17
9/16/08 5:02:23 PM
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
Project cost
18
Figure 1-6 Estimate of project cost: estimate made at project start.
Project cost
Time
t0
t1
t2
Time
Figure 1-7 Estimates of project cost: estimates made at time t0, t1, and t2.
altering the shapes of the curves, we could exchange titles on the axes. The figures would then show the uncertainty associated with estimates of the project schedule, given specific levels of expenditure. The relationship between time and cost (and performance) is emphasized throughout this book. Dealing with the uncertainty surrounding this relationship is a major responsibility of the PM.
1.4
THE STRUCTURE OF THIS TEXT This book, a project in itself, has been organized to follow the life cycle of all projects. It begins with the creative idea that launches most projects and ends with termination of the project. This approach is consistent with our belief that it is helpful to understand the entire process of project management in order to understand and manage its parts. Another characteristic of the book also relates to the process of project management: some topics, such as “procurement,” can largely be treated as stand-alone issues, discussed in a single appropriate place in the book, and then dispensed with. Other topics however, such as “risk,” or “planning,” arise throughout the book and are treated wherever they are relevant, which may be quite often. To attempt to treat them in a single section, or chapter, would be misleading. In addition, although this book is intended primarily for the student who wants to study project
81721_Ch01.indd 18
9/16/08 5:02:23 PM
1.4
THE STRUCTURE OF THIS TEXT
19
Project Management in Practice Demolishing San Francisco’s Bridges Safely
The Central Freeway Viaduct in downtown San Francisco suffered major structural damage during the 1989 Loma Prieta earthquake and recently had to be safely demolished. The task was complicated because the bilevel, multispan bridge passed within six feet of heavily populated buildings, ran in the vicinity of both overhead and underground utilities (gas, water, electric, and sewer lines), and crossed both commercial and residential areas with strict vibration and sound level restrictions. Thus, managing the demolition while ensuring the safety of both the on-going population and existing facilities was a major challenge. The primary tools for conducting such a delicate, but dangerous, operation were detailed planning and thorough communications with all related parties. An extensive Demolition Plan was required and included:
• •
81721_Ch01.indd 19
a Code of Safe Practice describing personal protective equipment for the workers, as well as a maintenance plan for the equipment; a Code of Safe Practice describing personal protective equipment for the workers, as well as a maintenance plan for the equipment;
• • • •
a dust control plan work-hour schedule noise-level monitoring load determinations and structural analyses.
Most of the demolition was accomplished using a breaker on the upper deck of the bridge and a pulverizer on the lower deck. First the roadway slab was demolished, then the girders were pulverized and all the debris pushed down to the ground. Then the cap, columns, and restrainers were demolished. This process continued along the length of the bridge until the entire distance was demolished. Constant monitoring was conducted for noise, vibration, safety, and procedures throughout the project. Continuous communication was made with utility companies and others concerned with a particular segment being demolished. In this fashion, the entire viaduct was demolished with no major accidents or injuries. Source: O. Y. Abudayyeh, “Safety Issues in Bridge Demolition Projects: A Case Study,” PM Network, January 1997, pp. 43–45.
9/16/08 5:02:23 PM
20
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
management, we feel it can also be of value to the prospective or acting PM, and to senior managers who initiate projects and select, work with, or manage PMs. Therefore, our interests often go beyond the issues of primary concern to beginning students. Most actual projects will not be of the size and complexity addressed in many of our discussions. Though our intent was not to confine our remarks only to large engineering-oriented projects, these are typically the most complex and place the greatest demands on project management. Smaller, simpler projects may therefore not require the depth of tools and techniques we will present, but the student or manager should be aware that such tools exist. Project management actually begins with the initial concept for the project. We feel that this aspect of project management is so important, yet so universally ignored in books on project management, that we included two appendices covering this area in previous editions of this book. In one appendix we discussed creativity and idea generation. In another, we described some of the techniques of technological forecasting. While our notion about the importance of these subjects is unchanged, the location of the two appendices has been moved from the end of this work to the Internet. The complete text of both appendices now appears in www.wiley.com/college/meredith/ (along with other items noted in the preface to this edition). We realize that these topics may be of more direct interest to the senior manager than the PM. Though a PM may prefer to skip this material, since what is past is past, we believe that history holds lessons for the future. Wise PMs will wish to know the reasons for, and the history behind, the initiation of their project. In years past, there were arguments between those who insisted that project management was primarily a quantitative science and those who maintained that it was a behavioral science. It has become clear that one cannot adequately manage a project without depending heavily on both mathematics and the science of human behavior. To contend that mathematics is exact and that behavioral science is “mushy” is to ignore the high level of subjectivity in most of the numeric estimates made about the times, costs, and risks associated with projects. On the other hand, to assert that “people don’t really use that stuff” (mathematical models) is to substitute wishful thinking for reality. For nonmathematicians, we have computers to help with the requisite arithmetic. For the nonbehaviorists, there is no help except hard work and an accepting attitude toward the subject. Before undertaking a journey, it is useful to know what roads are to be traveled. While each individual chapter begins with a more detailed account of its contents, what follows is a brief description of chapter contents along with their organization into three general areas: project initiation, project planning, and project execution. Following this introductory chapter, the material in Part I focuses on project initiation. We realize that many instructors (and students) would rather get to the basics of managing projects, and that can be done by moving directly to Part II of the text. However, we believe that without understanding the context of the project—why it was selected and approved, what project managers are responsible for and their many roles (such as running a team and negotiating for resources), the importance of the Project Management Office, and where (and why) the project resides in the organization’s hierarchy—a PM is courting disaster. Chapter 2 starts with a description of the concept of project management “maturity,” or sophistication, and how firms can evaluate their own competence in project management. It then details the problems of evaluating and selecting projects, as well as the information needed for project selection, the management of risk through simulation, and some of the technical details of proposals. The chapter concludes by expanding the concept of project selection to strategic management through judicious selection of the organization’s projects by means of an eight-step procedure called the “project portfolio process.” Chapter 3, “The Project Manager,” concerns the PM’s roles, responsibilities, and some personal characteristics a project manager should possess. It also discusses problems a PM faces when operating in a multicultural environment. Next, Chapter 4
81721_Ch01.indd 20
9/16/08 5:02:24 PM
1.4
THE STRUCTURE OF THIS TEXT
21
covers a subject of critical importance to the PM that is almost universally ignored in project management texts: the art of negotiating for resources. The chapter also includes some major sources of interpersonal conflict among members of the project team. Concluding Part I of the book, Chapter 5 concentrates on establishing the project organization. Different organizational forms are described, as well as their respective advantages and disadvantages. The staffing of the project team is also discussed. In Part II we consider project planning. This section of the text discusses the essentials of planning the project in terms of activities, costs, and schedule. Chapter 6 deals with project activity planning and presents tools useful in organizing and staffing the various project tasks. It also contains a short discussion of phase-gate management systems and other ways of dealing with the problems that arise when multidisciplinary teams work on complex projects. Because of its importance, budgeting is addressed next in Chapter 7. Scheduling, a crucial aspect of project planning, is then described in Chapter 8, along with the most common scheduling models such as the Program Evaluation and Review Technique (PERT), the Critical Path Method (CPM), and precedence diagramming. Concluding Part II, resource allocation is covered in Chapter 9. For single projects, we discuss how the resource allocation problem concerns resource leveling to minimize the cost of the resources; but for multiple projects, we learn that the issue is how to allocate limited resources among several projects in order to achieve the objectives of each. Part III of the text then gets into actual project execution. Chapter 10 examines the information requirements of a project and the need for monitoring critical activities. Included in this chapter is a description of some common Project Management Information Systems (PMIS). In general, it is not possible to manage adequately any but the smallest of projects without the use of a computerized PMIS. There are many such systems available and several are briefly discussed, but in this book all examples using PMIS will use Microsoft Project® (as well as Excel® and other software made to interact easily with Microsoft Project® and Excel®), by far the most popular project management software. While Microsoft has been a driving force in the development of project management software, there is a wide variety of PMIS available. We must add that to use any project management software wisely, the user must understand the principles of project management. Chapter 11 then describes the control process in project management. This chapter covers standards for comparison and tools to help the manager keep the project in control. Chapter 12 deals with methods for both ongoing and terminal audits and evaluations of a project, as well as identifying factors associated with project success and failure. Chapter 13 describes the different forms of project termination, such as outright shutdown, integration into the regular organization, or extension into a new project. Each of these forms presents unique problems for the PM to solve. The subject of risk management and its component parts, risk management planning, risk identification, risk assessment, risk quantification, risk response development, and risk monitoring and control (Project Management Institute, 2004), is given extensive coverage throughout this book. We considered the addition of a chapter specifically devoted to the management of risk, but the fact that risk and uncertainty are inherent in all aspects of project life led us to incorporate discussions of risk management when they were relevant to the problem at hand. Determination of the sources and nature of risks that might affect a project is risk identification and, in our opinion, should be the subject of an ongoing analysis carried out by the project council, the Project Management Office, and the project team itself. Risk identification, therefore, should be embedded as a part of any project, and we deal with the subject in Chapter 5 when we discuss project organization. Risk analysis, a term we use to cover both risk quantification and risk response planning, is devoted to estimating the specific impacts that various uncertainties may have on project outcomes. The techniques used to estimate and describe uncertain outcomes vary with the
81721_Ch01.indd 21
9/16/08 5:02:24 PM
22
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
particular problem at hand. Determination of the impact of risks on the project selection process, for example, is significantly different from a study of the impact of risks on project budgets or schedules. Each will be considered in its appropriate place. The use of Decisioneering’s Crystal Ball® (enclosed with this volume) will greatly simplify the mathematical difficulties often associated with risk analysis. With this introduction, let us begin our study, a project in itself, and, we hope, an interesting and pleasant one.
SUMMARY This chapter introduced the subject of project management and discussed its importance in our society. It defined what we mean by a “project,” discussed the need for project management, and described the project life cycle. The final section explained the structure of this text and gave an overview of the material to be described in coming chapters. The following specific points were made in the chapter.
• • • •
•
The Project Management Institute (PMI) was founded in 1969 to foster the growth and professionalism of project management. Project management is now being recognized as a valuable “career path” in many organizations, as well as a way to gain valuable experience within the organization. Project management, initiated by the military, provides managers with powerful planning and control tools. The three primary forces behind project management are (1) the growing demand for complex, customized goods and services; (2) the exponential expansion of human knowledge; and (3) the global production– consumption environment. The three prime objectives of project management are to meet specified performance within cost and on schedule.
• • • • •
Our terminology follows in this order: program, project, task, work package, work unit. Projects are characterized by their importance, specific end results, a definite life cycle, complex interdependencies, some or all unique elements, limited resources, and an environment of conflict. Project management, though not problem-free, is the best way to accomplish certain goals. Projects often start slowly, build up speed while using considerable resources, and then slow down as completion nears. This text is organized along the project life cycle concept, starting with project initiation in Chapters 2 to 5, where selection of the project and project manager occurs and project organization begins. Project planning, Chapters 6 to 9, is concerned with activity planning, budgeting, scheduling, and resource allocation. Project execution, covered in Chapters 10 to 13, relates to actually running the project and includes activity monitoring and control, auditing and evaluation, and finally project termination.
GLOSSARY Deliverables The desired elements of value, outcomes, or results that must be delivered for a project to be considered complete. Interdependencies Relations between organizational functions where one function or task is dependent on others. Life Cycle A standard concept of a product or project wherein it goes through a start-up phase, a building phase, a maturing phase, and a termination phase. Parties-at-Interest Individuals or groups (the stakeholders) with a special interest in a project, usually the
81721_Ch01.indd 22
project team, client, senior management, and specific public interest groups. Program Often not distinguished from a project, but frequently meant to encompass a group of similar projects oriented toward a specific goal. Project Management The means, techniques, and concepts used to run a project and achieve its objectives. Risk The chance that project processes or outcomes will not occur as planned. Stakeholder see “Parties-at-Interest.”
9/16/08 5:02:25 PM
QUESTIONS
Suboptimize Doing the best within a function or area but at a cost to the larger whole. Task A subset of a project, consisting of work packages. Technology The means for accomplishing a task. Trade-off Taking less on one measure, such as performance, in order to do better on another, such as schedule or cost.
23
Uncertainty Having only partial or no information about the situation or outcomes, often due to ambiguity or complexity. Work Package A subelement of a task at the lowest level in the Work Breakdown Strucure, used to assign costs and values.
QUESTIONS Material Review Questions
1. Name and briefly describe the societal forces that have contributed to the need for project management. 2. Describe the life cycle of a project in terms of (1) the degree of project completion; (2) required effort. 3. Describe the limitations of project management. 4. List the seven main characteristics of a project and briefly describe the important features of each. 5. Name and briefly describe the three primary goals of a project. 6. Discuss the advantages and disadvantages of project management.
7. How do projects, programs, tasks, and work packages differ? 8. How would you define a project? 9. What are some of the interdependencies related to a project? 10. What are some sources of conflict the project manager must deal with? 11. Differentiate between direct and ancillary project goals. Would learning a new skill through the project be a direct or ancillary goal? Entering a new market? 12. Describe the characteristics of quasi-projects.
Class Discussion Questions
13. Give several examples of projects found in our society, avoiding those already discussed in the chapter. 14. Describe some situations in which project management would probably not be effective. 15. How does the rate-of-project-progress chart (Fig. 1-3) help a manager make decisions? 16. Expound on the adage, “Projects proceed smoothly until 90 percent complete, and then remain at 90 percent forever.” 17. Discuss the duties and responsibilities of the project manager. How critical is the project manager to the success of the project? 18. Would you like to be a project manager? Why, or why not?
19. Discuss why there are trade-offs among the three prime objectives of project management. 20. Why is the life cycle curve often “S” shaped? 21. How might project management be used when doing a major schoolwork assignment? 22. Why is there such a pronounced bend in the curve of Figure 1-2? 23. Which of the identified project attributes in Section 1.1 are always present? Which are simply frequently present? 24. Describe a project whose life cycle would be a straight line from start to finish. Describe a project with an inverse-S life cycle.
Questions for Project Management in Practice The Olympic Torch Relay Project
25. Is the torch relay another part of the Olympics themselves, perhaps a sub-project?
26. Is the life cycle for this project S-shaped or shaped like the right half of a U or something else? Why?
Demolishing San Francisco’s Bridges Safely
27. What was the main consideration in this demolition project? 28. How would a demolition project differ from a more common construction project? Consider performance, schedule, and budget.
81721_Ch01.indd 23
29. Would the life cycle for this project be S-shaped or the right half of a U or something else? How about the life cycle for a freeway construction project?
9/16/08 5:02:25 PM
24
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
INCIDENTS FOR DISCUSSION Blanka Transport, Inc.
After several years of driving long-haul trucks, Joe Blanka founded his own trucking company, Blanka Transport Inc. (BTI), which specialized in less-than-carload shipments in the midwestern part of the United States. Joe developed a successful method for scheduling BTI’s runs that met or exceeded the delivery expectations of its customers. As a result, BTI shipments were growing at a rate between 15 and 20 percent per year. The growth, however, was not evenly distributed across BTI’s territory. On some routes, capacity was overloaded in one direction and underloaded in the other. Joe noticed that the imbalance problem was not stable across time. In some months capacity was short in one direction, and in other months it was short in another direction. He thought that one way of solving the problem would be through marketing, by offering incentives to customers whose shipments would improve load balance. Another approach to the problem was to analyze and restructure the route–equipment combinations. He also thought that it might be possible to warehouse some less-urgent shipments for short periods in order to help the balance. Joe’s son, the first member of the Blanka family to attend college, was a senior in engineering school. He had just completed a course in project management, and after briefly describing some of the basic concepts to his father, he suggested that a project might be a good way to deal with the balance problem. He thought that the Marketing Manager and the
Route Manager could serve as project co-managers. He also felt that some of the older, more experienced drivers might be helpful. The objective of the project would be to decrease the size of the route imbalances by 75 percent in a 1-year period. Questions: Is this a proper approach to the problem? What, if any, helpful suggestions would you make to Joe? Maladroit Cosmetics Company
The plant manager of the Maladroit Cosmetics Company must replace several of her filling machines that have become obsolete. She is about to take delivery of six machines at a total cost of $4 million. These machines must be installed and fully tested in time to be used on a new production line scheduled to begin operation in six months. Because this project is important, the plant manager would like to devote as much time as possible to the job, but she is currently handling several other projects. She thinks she has three basic choices: (1) she can handle the project informally out of her office; (2) she can assign the project to a member of her staff; or (3) the company that manufactures the machines can handle the installation project for a fee close to what the installation would cost Maladroit. Questions: Which of the three choices do you recommend, and why? If the project was one small machine at a total cost of $4,000, would your answer be different? Discuss the relative importance of the capital investment required versus the role of the investment in machinery.
CONTINUING INTEGRATIVE CLASS PROJECT It often helps in communicating the process, difficulties, and satisfactions of project management if the class can do a team project together during the term of the course. The instructor may have a pre-chosen project for the class to work on, perhaps in a local organization, or the school itself (where there are many excellent projects: the cafeteria, parking, library, counseling, class scheduling, etc.), but if not, the following project is offered as an alternative. The project is to prepare a “Student Study Guide” for this course, due (time requirement) on the last day of the course before the final examination. The purpose of the guide is to help the students learn the material of the course, both by preparing the guide as well as using it to study for the final examination. The requirements (performance, or “scope”) for the guide are as follows:
• •
81721_Ch01.indd 24
a professional-looking appearance a consistent approach throughout the chapters
• • • • •
a copy for every student, as well as the Instructor presented in either hard copy CD, flash memory, or electronic (e.g., web) form (check with your Instructor) everyone in class must participate, with one exception noted further below. if subteams are used, they must not be organized to operate independently of each other (for example, by doing all the work on one of the chapters). the project plans can be constructed manually or in Microsoft Project® or another software program (check with your instructor)
In addition, one student will be appointed as “Historian,” whose job is to monitor and prepare a written report on the progress of the project over its duration. This includes both the tasks to be accomplished, but also the attitude and
9/16/08 5:02:25 PM
BIBLIOGRAPHY
spirit of the Project Manager (PM), the project team and/or subteams, and the various stakeholders in the project (team members, Instructor, future students who may use the Guide) as well as the culture and environment of the project. The main task of the Historian is to compare the reality of the class project to that described in the textbook and point out in the written report similarities and differences that will be recognizable by the PM and team members. The Historian will have no work to do on the project itself, but will need to sit in on meetings, confer with the PM and subteam heads, talk to team members occasionally, confer with the Instructor, and other such activities as needed to properly monitor task progress. The role of this person is especially critical for the class to learn how closely their project followed the typical path of a normal project, what problems arose and how they should have been handled, and so forth. As a result, this person should probably be selected by the Instructor right at the beginning of the course. There may also be some expenses (budget requirement), such as photocopying costs and travel expenses, that may require assistance from the Instructor. Usually these costs are minor, but it depends on the project. Of course, in a real project the major cost would be the labor/personnel costs of the team members doing the work, a cost that is essentially “free” here. In future chapters we will continue to develop the various elements of the project, such as selecting the PM, organizing the team, scheduling the deliverables, and monitoring
25
progress. However, executing the requisite tasks of the project takes the most time in a real project but is a topic that is outside the scope of this text, which concerns only the generic tasks of project management. (Every project will have different tasks associated with it, many with very technical requirements.) Therefore, it will be necessary to forge ahead and do all the preparatory project elements, particularly in Parts I and II of the book, so that progress on the project tasks can begin right away. It would, of course, be best if the class could read all the material up to Chapter 10, which initiates Part III: Project Execution, where the work begins, before actually starting the project. Unfortunately, the course would be almost over by then and it would be too late to start a project. As a result, the PM and the class will have to skip ahead and read the Continuing Integrative Class Project assignments, at least for Chapters 2–10 now; hopefully, they will discover in retrospect how they could have conducted each of the various elements of the project better. But for right now, it is most important to cover the project elements in Chapters 2 and 3—what the project will be and who will be the PM, respectively, so the project can get underway ASAP. It is best to do these two elements in the very first class, the first one in consultation with the Instructor, and the second one with the Instructor ABSENT from the room but with instructions for where to find him or her once the class has selected the PM, hopefully within 20 minutes but most certainly by the end of the class. Good luck!
BIBLIOGRAPHY Cioffi, D. F. Personal communication, 2004. Darnell, R. “The Emerging Role of the Project Manager.” PM Network, July 1997. Davis, E. W. “CPM Use in Top 400 Construction Firms.” Journal of the Construction Division, American Society of Civil Engineers, 1974. Davis, E. W. Project Management: Techniques, Applications, and Managerial Issues, 2nd ed. Norcross, GA: AIIE Monograph, 1983. Gido, J., and J. P. Clements. Successful Project Management, with Microsoft Project 2003 CD-ROM. Cincinnati: Thompson/South-Western, 2004. Grey, C. F., and E. W. Larson. Project Management: The Managerial Process. New York: McGraw-Hill/Irwin, 2005. Hughes, T. P. Rescuing Prometheus. New York, Pantheon, 1998. Ibbs, C. W., and Y. H. Kwak. “Measuring Project Management’s Return on Investment.” PM Network, Nov. 1997.
81721_Ch01.indd 25
Ibbs, C. W., and Y. H. Kwak, “Assessing Project Management Maturity.” Project Management Journal, March 2000. Kerzner, H. Project Management: A Systems Approach to Planning, Scheduling, and Controlling, 8th ed. New Jersey: Wiley, 2003. Pande, P. S., R. P. Newman, and R. R. Cavanagh. The Six Sigma Way, New York: McGraw-Hill, 2000. Project Management Institute. A Guide to the Project Management Body of Knowledge, 3rd ed. Newtown Square, PA: Project Management Institute, 2004. Pyzdek, T. The Six Sigma Handbook, rev. ed., New York: McGraw-Hill, 2003. Sandberg, J. “Rise of False Deadline Means Truly Urgent Often Gets Done Late.” Wall Street Journal, January 24, 2007. Shenhar, A. J., O. Levy, and D. Dvir. “Mapping the Dimensions of Project Success.” Project Management Journal, June 1997. Sun, M. “Weighing the Social Costs of Innovation.” Science, March 30, 1984.
9/16/08 5:02:26 PM
26
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
The following reading describes the common occurrence of someone suddenly being appointed a project manager and finding he or she has been inadequately trained for the task. Based on the authors’ own experiences and interviews with dozens of senior project managers, they distill twelve guidelines for new project managers. The guidelines run the gamut from project initiation, through planning, to execution and close-out. Some are technical, some are uncommon sense, and many are philosophical, and sometimes political. But they are sage advice, not only for the novice but for the experienced project manager as well.
D I R E C T E D
R E A D I N G
LESSONS FOR AN ACCIDENTAL PROFESSION J. K. Pinto and O. P. Kharbanda: Lessons for an Accidental Profession. Reprinted with permission from Business Horizons, March–April 1995. Copyright ©1995 by Indiana University Kelly School of Business.
Projects and project management are the wave of the future in global business. Increasingly technically complex products and processes, vastly shortened time-to-market windows, and the need for cross-functional expertise make project management an important and powerful tool in the hands of organizations that understand its use. But the expanded use of such techniques is not always being met by a concomitant increase in the pool of competent project managers. Unfortunately, and perhaps ironically, it is the very popularity of project management that presents many organizations with their most severe challenges. They often belatedly discover that they simply do not have sufficient numbers of the sorts of competent project managers who are often the key driving force behind successful product or service development. Senior managers in many companies readily acknowledge the ad hoc manner in which most project managers acquire their skills, but they are unsure how to better develop and provide for a supply of well-trained project leaders for the future. In this article, we seek to offer a unique perspective on this neglected species. Though much has been written on how to improve the process of project management, less is known about the sorts of skills and challenges that specifically characterize project managers. What we do know tends to offer a portrait of successful project managers as strong leaders, possessing a variety of problem-solving, communication, motivational, visionary, and team-building skills. Authors such as Posner (1987), Einsiedel (1987), and Petterson (1991) are correct. Project managers are a special breed. Managing projects is a unique challenge that requires a strategy and methodology all its own. Perhaps most important, it requires people willing to function as leaders in every sense of the term. They must not only chart the appropriate course, but provide the means, the support, and the confidence for their teams to attain these goals. Effective project managers often operate less as directive and autocratic decision makers than as facilitators, team members, and cheerleaders. In effect, the characteristics we look for in
81721_Ch01.indd 26
project managers are varied and difficult to pin down. Our goal is to offer some guidelines for an accidental profession, based on our own experiences and interviews with a number of senior project managers—most of whom had to learn their own lessons the hard way.
“Accidental” Project Managers Project managers occupy a unique and often precarious position within many firms. Possessing little formal authority and forced to operate outside the traditional organizational hierarchy, they quickly and often belatedly learn the real limits of their power. It has been said that an effective project manager is the kingpin, but not the king. They are the bosses, it is true, but often in a loosely defined way. Indeed, in most firms they may lack the authority to conduct performance appraisals and offer incentives and rewards to their subordinates. As a result, their management styles must be those of persuasion and influence, rather than coercion and command. Because of these and other limitations on the flexibility and power of project managers, project management has rightly been termed the “accidental profession” by more than one writer. There are two primary reasons for this sobriquet. First, few formal or systematic programs exist for selecting and training project managers, even within firms that specialize in project management work. This results at best in ad hoc training that may or may not teach these people the skills they need to succeed. Most project managers fall into their responsibilities by happenstance rather than by calculation. Second, as Frame (1987) cogently observed, few individuals grow up with the dream of one day becoming a project manager. It is neither a well-defined nor a well-understood career path within most modern organizations. Generally, the role is thrust upon people, rather than being sought. Consider the typical experiences of project managers within many corporations. Novice managers, new to the company and its culture, are given a project to complete
9/16/08 5:02:26 PM
DIRECTED READING
with the directive to operate within a set of narrowly defined constraints. These constraints most commonly include a specified time frame for completion, a budget, and a set of performance characteristics. Those who are able to quickly master the nature of their myriad duties succeed; those who do not generally fail. This “fly or die” mentality goes far toward creating an attitude of fear among potential project managers. Generation after generation of them learn their duties the hard way, often after having either failed completely or stumbled along from one crisis to another. The predictable result is wasteful: failed projects; managers battling entrenched bureaucracy and powerful factions; money, market opportunities, and other resources irretrievably lost to the company. The amazing part of this scenario is that it is repeated again and again in company after company. Rather than treating project management as the unique and valuable discipline it is, necessitating formal training and selection policies, many companies continue to repeat their past mistakes. This almost leads one to believe they implicitly view experience and failure as the best teacher. We need to shed light on the wide range of demands, opportunities, travails, challenges, and vexations that are part of becoming a better project manager. Many of the problems these individuals struggle with every day are far more managerial or behavioral in nature than technical. Such behavioral challenges are frequently vexing, and though they can sometimes seem inconsequential, they have a tremendous impact on the successful implementation of projects. For example, it does not take long for many project managers to discover exactly how far their personal power and status will take them in interacting with the rest of the organization. Hence, an understanding of influence tactics and political behavior is absolutely essential. Unfortunately, novice project managers are rarely clued into this important bit of information until it is too late—until, perhaps, they have appealed through formal channels for extra resources and been denied. Consider the following examples:
•
81721_Ch01.indd 27
A long-distance telephone company whose CEO became so enamored of the concept of high-profile project teams—or “skunkworks,” as they have come to be called—that he assigned that title to the few most highly visible, strategically important projects. Quickly, both senior and middle managers in departments across the organization came to realize that the only way to get their pet projects the resources necessary to succeed was to redesignate all new projects as “skunkworks.” At last report, there were more than 75 high-profile skunkworks projects whose managers report directly to the CEO. The company now has severe difficulties in making research allocation decisions among its projects and routinely underfunds some vital projects while overfunding other, less important ones.
•
•
•
27
A large computer hardware manufacturer has been dominated by the members of the hardware engineering department to such an extent that practically all new product ideas originate internally, within the department. By the time marketing personnel (sneeringly called “order takers” by the engineering department) are brought on board, they are presented with a fait accompli: a finished product they are instructed to sell. Marketing managers are now so cynical about new projects that they usually do not even bother sending a representative to new product development team meetings. A medium-sized manufacturing firm made it a policy to reward and punish project managers on the basis of their ability to bring projects in on time and under budget. These project managers were never held to any requirement that the project be accepted by its clients or become commercially successful. They quickly learned that their rewards were simply tied to satisfying the cost accountants, so they began to cut corners and make decisions that seriously undermined product quality. Projects in one division of a large, multinational corporation are routinely assigned to new managers who often have less than one year of experience with the company. Given a project scheduling software package and the telephone number of a senior project manager to be used “only in emergencies,” they are instructed to form their project teams and begin the development process without any formal training or channels of communication to important clients and functional groups. Not surprisingly, senior managers at this company estimate that fewer than 30 percent of new product development efforts are profitable. Most take so long to develop, or incur such high cost overruns, that they are either abandoned before scheduled introduction or never live up to their potential in the marketplace.
This ad hoc approach to project management—coupled, as it frequently is, with an on-the-job training philosophy— is pervasive. It is also pernicious. Under the best of circumstances, project managers are called upon to lead, coordinate, plan, and control a diverse and complex set of processes and people in the pursuit of achieving project objectives. To hamper them with inadequate training and unrealistic expectations is to unnecessarily penalize them before they can begin to operate with any degree of confidence or effectiveness. The successful management of projects is simultaneously a human and technical challenge, requiring a far-sighted, strategic outlook coupled with the flexibility to react to conflicts and trouble areas as they arise on a daily basis. The project managers who are ultimately successful at their profession must learn to deal with and anticipate the constraints on their
9/16/08 5:02:27 PM
28
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
project team and personal freedom of action while consistently keeping their eyes on the ultimate prize.
From Whence Comes the Challenge? One of the most intriguing and challenging aspects of project management lies in the relationship of project teams to the rest of the parent organization. With the exception of companies that are set up with matrix or project structures, most firms using project management techniques employ some form of standard functional structure. When project teams are added to an organization, the structural rules change dramatically. The vast majority of personnel who serve on project teams do so while maintaining links back to their functional departments. In fact, they typically split their time between the project and their functional duties. The temporary nature of projects, combined with the very real limitations on power and discretion most project managers face, constitutes the core challenge of managing projects effectively. Clearly the very issues that characterize projects as distinct from functional work also illustrate the added complexity and difficulties they create for project managers. For example, within a functional department it is common to find people with more homogeneous backgrounds. This means that the finance department is staffed with finance people, the marketing department is made up of marketers, and so on. On the other hand, most projects are constructed from special, cross-functional teams composed of representatives from each of the relevant functional departments, who bring their own attitudes, time frames, learning, past experiences, and biases to the team. Creating a cohesive and potent team out of this level of heterogeneity presents a challenge for even the most seasoned and skilled of project managers. But what is the ultimate objective? What determines a successful project and how does it differ from projects we may rightfully consider to have failed? Any seasoned project
1. Understand the context of project management. 2. Recognize project team conflict as progress. 3. Understand who the stakeholders are and what they want. 4. Accept and use the political nature of organizations. 5. Lead from the front. 6. Understand what “success” means. 7. Build and maintain a cohesive team. 8. Enthusiasm and despair are both infectious. 9. One look forward is worth two looks back. 10. Remember what you are trying to do. 11. Use time carefully or it will use you. 12. Above all, plan, plan, plan. Figure 1
81721_Ch01.indd 28
Twelve points to remember.
manager will usually tell you that a successful project is one that has come in on time, has remained under budget, and performs as expected (that is, it conforms to specifications). Recently, though, there has been a reassessment of this traditional model for project success. The old triple constraint is rapidly being replaced by a new model, invoking a fourth hurdle for project success: client satisfaction. This means that a project is only successful if it satisfies the needs of its intended user. As a result, client satisfaction places a new and important constraint on project managers. No wonder, then, that there is a growing interest in the project manager’s role within the corporation.
The Vital Dozen for Project Managers Over the last several years, we have conducted interviews with dozens of senior project managers in which we asked them a simple question: “What information were you never given as a novice project manager that, in retrospect, could have made your job easier?” From the data gathered in these interviews, we have synthesized some of the more salient issues, outlined in Figure 1 and detailed below, that managers need to keep in mind when undertaking a project implementation effort. While not intended to appear in any particular order, these 12 rules offer a useful way to understand the challenge project managers face and some ways to address these concerns. 1. Understand the context of project management. Much of the difficulty in becoming an effective project manager lies in understanding the particular challenges project management presents in most corporations. Projects are a unique form of organizational work, playing an important role within many public and private organizations today. They act as mechanisms for the effective introduction of new products and services. They offer a level of intraorganizational efficiency that all companies seek but few find. But they also force managers to operate in a temporary environment outside the traditional functional lines of authority, relying upon influence and other informal methods of power. In essence, it is not simply the management of a project per se that presents such a unique challenge; it is also the atmosphere within which the manager operates that adds an extra dimension of difficulty. Projects exist outside the established hierarchy. They threaten, rather than support, the status quo because they represent change. So it is important for project managers to walk into their assigned role with their eyes wide open to the monumental nature of the tasks they are likely to face. 2. Recognize project team conflict as progress. One of the common responses of project managers to team conflict is panic. This reaction is understandable in that project managers perceive—usually correctly—that their reputation and careers are on the line if the project fails. Consequently, any
9/16/08 5:02:27 PM
DIRECTED READING
evidence they interpret as damaging to the prospects of project success, such as team conflict, represents a very real source of anxiety. In reality, however, these interpersonal tensions are a natural result of putting individuals from diverse backgrounds together and requiring them to coordinate their activities. Conflict, as evidenced by the stages of group development, is more often a sign of healthy maturation in the group. The result of differentiation among functional departments demonstrates that conflict under these circumstances is not only possible but unavoidable. One of the worst mistakes a project manager can make when conflicts emerge is to immediately force them below the surface without first analyzing the nature of the conflict. Although many interpersonal conflicts are based on personality differences, others are of a professional nature and should be addressed head-on. Once a project manager has analyzed the nature of the conflict among team members, a variety of conflict handling approaches may be warranted, including avoidance, defusion, or problem-solving. On the other hand, whatever approach is selected should not be the result of a knee-jerk reaction to suppress conflict. In our experience, we have found many examples that show that even though a conflict is pushed below the surface, it will continue to fester if left unaddressed. The resulting eruption, which will inevitably occur later in the project development cycle, will have a far stronger effect than would the original conflict if it had been handled initially. 3. Understand who the stakeholders are and what they want. Project management is a balancing act. It requires managers to juggle the various and often conflicting demands of a number of powerful project stakeholders. One of the best tools a project manager can use is to develop a realistic assessment early in the project identifying the principal stakeholders and their agendas. In some projects, particularly those with important external clients or constituent groups, the number of stakeholders may be quite large, particularly when “intervenor” groups are included. Intervenors, according to Cleland (1983), may include any external group that can drastically affect the potential for project success, such as environmental activists in a nuclear plant construction project. Project managers who acknowledge the impact of stakeholders and work to minimize their effect by fostering good relations with them are often more successful than those who operate in a reactive mode, continually surprised by unexpected demands from groups that were not initially considered. As a final point about stakeholders, it is important for a project manager’s morale to remember that it is essentially impossible to please all the stakeholders all the time. The conflicting nature of their demands suggests that when one group is happy, another is probably upset. Project managers need to forget the idea of maximizing everyone’s happiness
81721_Ch01.indd 29
29
and concentrate instead on maintaining satisfactory relations that allow them to do their job with a minimum of external interference. 4. Accept the political nature of organizations and use it to your advantage. Like it or not, we exist in a politicized world. Unfortunately, our corporations are no different. Important decisions involving resources are made through bargaining and deal-making. So project managers who wish to succeed must learn to use the political system to their advantage. This involves becoming adept at negotiation as well as using influence tactics to further the goals of the project. At the same time, it is important to remember that any project representing possible organizational change is threatening, often because of its potential to reshuffle the power relationships among the key units and actors. Playing the political system acknowledges this reality. Successful project managers are those who can use their personal reputations, power, and influence to ensure cordial relations with important stakeholders and secure the resources necessary to smooth the client’s adoption of the project. Pursuing a middle ground of political sensibility is the key to project implementation success. There are two alternative and equally inappropriate approaches to navigating a firm’s political waters: becoming overly political and predatory—we call these people “sharks”—and refusing to engage in politics to any degree—the politically “naive.” Political sharks and the politically naive are at equal disadvantage in managing their projects: sharks because they pursue predatory and self-interested tactics that arouse distrust, and the naive because they insist on remaining above the fray, even at the cost of failing to attain and keep necessary resources for their projects. Figure 2 illustrates some of the philosophical differences among the three types of political actors. The process of developing and applying appropriate political tactics means using politics as it can most effectively be used: as a basis for negotiation and bargaining. “Politically sensible” implies being politically sensitive to the concerns (real or imagined) of powerful stakeholder groups. Legitimate or not, their concerns over a new project are real and must be addressed. Politically sensible managers understand that initiating any sort of organizational disruption or change by developing a new project is bound to reshuffle the distribution of power within the firm. That effect is likely to make many departments and managers very nervous as they begin to wonder how the future power relationships will be rearranged. Appropriate political tactics and behavior include making alliances with powerful members of other stakeholder departments, networking, negotiating mutually acceptable solutions to seemingly insoluble problems, and recognizing that most organizational activities are predicated on the give-and-take of negotiation and compromise. It is through
9/16/08 5:02:27 PM
30
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
Characteristics Underlying Attitude Intent Techniques
Naive Politics is unpleasant Avoid at all costs Tell it like it is
Favorite Tactics
None—the truth will win out
Figure 2
Sensible Politics is necessary Further departmental goals Network; expand connections; use system to give and receive favors Negotiate, bargain
Bully; misuse information; cultivate and use “friends” and other contacts
Characteristics of political behaviors.
these uses of political behavior that managers of project implementation efforts put themselves in the position to most effectively influence the successful introduction of their systems. 5. Lead from the front; the view is better. One message that comes through loud and clear is that project management is a “leader intensive” undertaking. Strong, effective leaders can go a long way toward helping a project succeed even in the face of a number of external or unforeseen problems. Conversely, a poor, inflexible leader can often ruin the chances of many important projects ever succeeding. Leaders are the focal point of their projects. They serve as a rallying point for the team and are usually the major source of information and communication for external stakeholders. Because their role is so central and so vital, it is important to recognize and cultivate the attributes project “leaders” must work to develop. The essence of leadership lies in our ability to use it flexibly. This means that not all subordinates or situations merit the same response. Under some circumstances an autocratic approach is appropriate; other situations will be far better served by adopting a consensual style. Effective project leaders seem to understand this idea intuitively. Their approach must be tailored to the situation; it is self-defeating to attempt to tailor the situation to a preferred approach. The worst leaders are those who are unaware of or indifferent to the freedom they have to vary their leadership styles. And they see any situation in which they must involve subordinates as inherently threatening to their authority. As a result, they usually operate under what is called the “Mushroom” Principle of Management.” That is, they treat their subordinates the same way they would raise a crop of mushrooms— by keeping them in the dark and feeding them a steady diet of manure. Flexible leadership behavior consists of a realistic assessment of personal strengths and weaknesses. It goes without saying that no one person, including the project manager, possesses all necessary information, knowledge, or expertise to perform the project tasks on his own. Rather, successful
81721_Ch01.indd 30
Sharks Politics is an opportunity Self-serving and predatory Manipulate; use fraud and deceit when necessary
project managers usually acknowledge their limitations and work through subordinates’ strengths. In serving as a facilitator, one of the essential abilities of an exceptional project manager is knowing where to go to seek the right help and how to ask the right questions. Obviously, the act of effective questioning is easier said than done. However, bear in mind that questioning is not interrogation. Good questions challenge subordinates without putting them on the spot; they encourage definite answers rather than vague responses, and they discourage guessing. The leader’s job is to probe, to require subordinates to consider all angles and options, and to support them in making reasoned decisions. Direct involvement is a key component of a leader’s ability to perform these tasks. 6. Understand what “success” means. Successful project implementation is no longer subject to the traditional “triple constraint.” That is, the days when projects were evaluated solely on adherence to budget, schedule, and performance criteria are past. In modern business, with its increased emphasis on customer satisfaction, we have to retrain project managers to expand their criteria for project success to include a fourth item: client use and satisfaction. What this suggests is that project “success” is a far more comprehensive word than some managers may have initially thought. The implication for rewards is also important. Within some organizations that regularly implement projects, it is common practice to reward the implementation manager when, in reality, only half the job has been accomplished. In other words, giving managers promotions and commendations before the project has been successfully transferred to clients, is being used, and is affecting organizational effectiveness is seriously jumping the gun. Any project is only as good as it is used. In the final analysis, nothing else matters if a system is not productively employed. Consequently, every effort must be bent toward ensuring that the system fits in with client needs, that their concerns and opinions are solicited and listened to, and that they have final sign-off approval on the transferred project. In other words, the intended user of the project is the major
9/16/08 5:02:28 PM
DIRECTED READING
determinant of its success. Traditionally, the bulk of the team’s efforts are centered internally, mainly on their own concerns: budgets, timetables, and so forth. Certainly, these aspects of the project implementation process are necessary, but they should not be confused with the ultimate determinant of success: the client. 7. Build and maintain a cohesive team. Many projects are implemented through the use of cross-functional teams. Developing and maintaining cordial team relations and fostering a healthy intergroup atmosphere often seems like a full-time job for most project managers. However, the resultant payoff from a cohesive project team cannot be overestimated. When a team is charged to work toward project development and implementation, the healthier the atmosphere within that team, the greater the likelihood the team will perform effectively. The project manager’s job is to do whatever is necessary to build and maintain the health (cohesion) of the team. Sometimes that support can be accomplished by periodically checking with team members to determine their attitudes and satisfaction with the process. Other times the project manager may have to resort to less conventional methods, such as throwing parties or organizing field trips. To effectively intervene and support a team, project managers play a variety of roles—motivator, coach, cheerleader, peacemaker, conflict resolver. All these duties are appropriate for creating and maintaining an effective team. 8. Enthusiasm and despair are both infectious. One of the more interesting aspects of project leaders is that they often function like miniaturized billboards, projecting an image and attitude that signals the current status of the project and its likelihood for success. The team takes its cue from the attitudes and emotions the manager exhibits. So one of the most important roles of the leader is that of motivator and encourager. The worst project managers are those who play their cards close to their chests, revealing little or nothing about the status of the project (again, the “Mushroom Manager”). Team members want and deserve to be kept abreast of what is happening. It is important to remember that the success or failure of the project affects the team as well as the manager. Rather than allowing the rumor mill to churn out disinformation, team leaders need to function as honest sources of information. When team members come to the project manager for advice or project updates, it is important to be honest. If the manager does not know the answer to the questions, he should tell them that. Truth in all forms is recognizable, and most project team members are much more appreciative of honesty than of eyewash. 9. One look forward is worth two looks back. A recent series of commercials from a large computer manufacturer had as their slogan the dictum that the company never stop asking “What if?.” Asking “What if?” questions is another way of saying we should never become comfortable with the status of the project under development. One large-scale study
81721_Ch01.indd 31
31
found that the leading determinant of project failure was the absence of any troubleshooting mechanisms—that is, no one was asking the “What if?” questions. Projecting a skeptical eye toward the future may seem gloomy to some managers. But in our opinion, it makes good sense. We cannot control the future but we can actively control our response to it. A good example of the failure to apply this philosophy is evidenced by the progress of the “Chunnel” intended to link Great Britain with France. Although now in full operation, it was not ready for substantial traffic until some 15 months later than originally scheduled. As a result, Chunnel traffic missed the major summer vacation season with a concomitant loss in revenue. At the same time, the final cost (£15 billion) is likely to be six times the original estimate of £2.3 billion (O’Connor, 1993). It is instructive to take note of a recent statement by one of the project’s somewhat harassed directors who, when pressed to state when the Chunnel would be ready, replied, “Now it will be ready when it’s ready and not before!” Clearly, the failure to apply adequate contingency planning has led to the predictable result: a belief that the project will simply end when it ends. 10. Remember what you are trying to do. Do not lose sight of the purpose behind the project. Sometimes it is easy to get bogged down in the minutiae of the development process, fighting fires on a daily basis and dealing with thousands of immediate concerns. The danger is that in doing so, project managers may fail to maintain a view of what the end product is supposed to be. This point reemphasizes the need to keep the mission in the forefront—and not just the project manager, but the team as well. The goal of the implementation serves as a large banner the leader can wave as needed to keep attitudes and motives focused in the right direction. Sometimes a superordinate goal can serve as a rallying point. Whatever technique project managers use, it is important that they understand the importance of keeping the mission in focus for all team members. A simple way to discover whether team members understand the project is to intermittently ask for their assessment of its status. They should know how their contributions fit into the overall installation plan. Are they aware of the specific contributions of other team members? If no, more attention needs to be paid to reestablishing a community sense of mission. 11. Use time carefully or it will use you. Time is a precious commodity. Yet when we talk to project managers, it seems that no matter how hard they work to budget it, they never have enough. They need to make a realistic assessment of the “time killers” in their daily schedule: How are they spending their time and what are they doing profitably or unprofitably? We have found that the simple practice of keeping a daily time log for a short time can be an eyeopening experience. Many project managers discover that they spend far too much of their time in unproductive ways: project team meetings without agendas that grind on and on, unexpected telephone calls in the middle of planning
9/16/08 5:02:28 PM
32
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
sessions, quick “chats” with other managers that end up taking hours, and so forth. Efficient time management—one of the keys to successful project development—starts with project managers. When they actively plan their days and stick to a time budget, they usually find they are operating efficiently. On the other hand, when they take each problem as it comes and function in an ad hoc, reactive mode, they are likely to remain prisoners of their own schedules. A sure recipe for finding the time and resources needed to get everything done without spending an inordinate amount of time on the job or construction site is provided by Gosselin (1993). The author lists six practical suggestions to help project managers control their tasks and projects without feeling constantly behind schedule:
• • • • • •
Create a realistic time estimate without overextending yourself. Be absolutely clear about what the boss or client requires. Provide for contingencies (schedule slippage, loss of key team member). Revise original time estimate and provide a set of options as required. Be clear about factors that are fixed (specifications, resources, and so on). Learn to say “Yes, and . . .” rather than “No, but . . .” Negotiation is the key.
12. Above all, plan, plan, plan. The essence of efficient project management is to take the time to get it as right as possible the first time. “It” includes the schedule, the team composition, the project specifications, and the budget. There is a truism that those who fail to plan are planning to fail. One of the practical difficulties with planning is that so many of us distinguish it from other aspects of the project development, such as doing the work. Top managers are often particularly guilty of this offense as they wait impatiently for the project manager to begin doing the work. Of course, too much planning is guaranteed to elicit repeated and pointed questions from top management and other stakeholders as they seek to discover the reason why “nothing is being done.” Experienced project managers, though, know that it is vital not to rush this stage by reacting too quickly to top management inquiries. The planning stage must be managed carefully to allow the project manager and team the time necessary to formulate appropriate and workable plans that will form the basis for the development process. Dividing up the tasks and starting the “work” of the project too quickly is often ultimately wasteful. Steps that were poorly done are often steps that must be redone. A complete and full investigation of any proposed project does take significant time and effort. However, bear in mind that overly elaborate or intricate planning can be detrimental to a project; by the time an opportunity is fully
81721_Ch01.indd 32
investigated, it may no longer exist. Time and again we have emphasized the importance of planning, but it is also apparent that there comes a limit, both to the extent and the time frame of the planning cycle. A survey among entrepreneurs, for example, revealed that only 28 percent of them drew up a full-scale plan (Sweet, 1994). A lesson here for project managers is that, like entrepreneurs, they must plan, but they must also be smart enough to recognize mistakes and change their strategy accordingly. As is noted in an old military slogan, “No plan ever survives its first contact with the enemy.”
Project Managers in the Twenty-First Century In our research and consulting experiences, we constantly interact with project managers, some with many years of experience, who express their frustration with their organizations because of the lack of detailed explication of their assigned tasks and responsibilities. Year after year, manager after manager, companies continue to make the same mistakes in “training” their project managers, usually through an almost ritualized baptism of fire. Project managers deserve better. According to Rodney Turner (1993), editor of the International Journal of Project Management: Through the 90’s and into the 21st century, projectbased management will sweep aside traditional functional line management and (almost) all organizations will adopt flat, flexible organizational structures in place of the old bureaucratic hierarchies . . . [N]ew organizational structures are replacing the old . . . [M]anagers will use project-based management as a vehicle for introducing strategic planning and for winning and maintaining competitive advantage. Turner presents quite a rosy future, one that is predicated on organizations recognizing the changes they are currently undergoing and are likely to continue to see in the years ahead. In this challenging environment, project management is emerging as a technique that can provide the competitive edge necessary to succeed, given the right manager. At the same time, there seems to have been a sea change in recent years regarding the image of project managers. The old view of the project manager as essentially that of a decision maker, expert, boss, and director seems to be giving way to a newer ideal: that of a leader, coach, and facilitator. Lest the reader assume these duties are any easier, we would assert that anyone who has attempted to perform these roles knows from personal experience just how difficult they can be. As part of this metamorphosis, says Clarke (1993), the new breed of project manager must be a natural salesperson who can establish harmonious customer (client) relations and develop trusting relationships with stakeholders. In addition to some of the obvious keys to project managers’ success—personal commitment, energy, and enthusiasm—it
9/16/08 5:02:28 PM
DIRECTED READING
appears that, most of all, successful project managers must manifest an obvious desire to see others succeed. For successful project managers, there will always be a dynamic tension between the twin demands of technical training and an understanding of human resource needs. It must be clearly understood, however, that in assessing the relative importance of each challenge, the focus must clearly be on managing the human side of the process. As research and practice consistently demonstrate, project management is primarily a challenge in managing people. This point was recently brought to light in an excellent review of a book on managing the “human side” of projects (Horner, 1993): There must be many project managers like me who come from a technological background, and who suffered an education which left them singularly illprepared to manage people. Leading researchers and scholars perceive the twentyfirst century as the upcoming age of project management. The globalization of markets, the merging of many European economies, the enhanced expenditures of money on capital improvement both in the United States and abroad, the rapidly opening borders of Eastern European and Pacific Rim countries, with their goals of rapid infrastructure expansion—all of this offers an eloquent argument for the enhanced popularity of project management as a technique for improving the efficiency and effectiveness of organizational operations. With so much at stake, it is vital that we immediately begin to address some of the deficiencies in our project management theory and practice. Project management techniques are well known. But until we are able to take further steps toward formalizing training by teaching the necessary skill set, the problems with efficiently developing, implementing, and gaining client acceptance for these projects are likely to continue growing. There is currently a true window of opportunity in the field of project management. Too often in the past, project managers have been forced to learn their skills the hard way, through practical experience coupled with all the problems of trial and error. Certainly, experience is a valuable component of learning to become an effective project manager, but it is by no means the best. What conclusions are to be drawn here? If nothing else, it is certain that we have painted a portrait of project management as a complex, time-consuming, often exasperating process. At the same time, it is equally clear that successful project managers are a breed apart. To answer the various calls they continually receive, balance the conflicting demands of a diverse set of stakeholders, navigate tricky corporate political waters, understand the fundamental process of subordinate motivation, develop and constantly refine their leadership skills, and engage in the thousands of pieces of detailed minutiae while keeping their eyes fixed firmly on project goals requires individuals with
81721_Ch01.indd 33
33
special skills and personalities. Given the nature of their duties, is it any wonder successful project managers are in such short supply and, once identified, so valued by their organizations? There is good news, however. Many of these skills, though difficult to master, can be learned. Project management is a challenge, not a mystery. Indeed, it is our special purpose to demystify much of the human side of project management, starting with the role played by the linchpin in the process: the project manager. The problem in the past has been too few sources for either seasoned or novice project managers to turn to in attempting to better understand the nature of their unique challenge and methods for performing more effectively. Too many organizations pay far too little attention to the process of selecting, training, and encouraging those people charged to run project teams. The predictable result is to continually compound the mistake of creating wave after wave of accidental project managers, forcing them to learn through trial and error with minimal guidance in how to perform their roles. Managing a project is a challenge that requires a strategy and methodology all its own. Perhaps most important, it requires a project manager willing to function as a leader in every sense of the term. We have addressed a wide range of challenges, both contextual and personal, that form the basis under which projects are managed in today’s organizations. It is hoped that readers will find something of themselves as well as something of use contained in these pages.
References B. N. Baker, P. C. Murphy, and D. Fisher, “Factors Affecting Project Success,” in D. I. Cleland and W. R. King, eds., Project Management Handbook (New York: Van Nostrand Reinhold, 1983): 778–801. K. Clarke, “Survival Skills for a New Breed,” Management Today, December 1993, p. 5. D. I. Cleland, “Project Stakeholder Management,” in D. I. Cleland and W. R. King, eds., Project Management Handbook (New York:Van Nostrand Reinhold, 1983): 275–301. J. C. Davis, “The Accidental Profession,” Project Management Journal, 15, 3 (1984): 6. A. A. Einsiedel, “Profile of Effective Project Managers,” Project Management Journal, 18, 5 (1987): 51–56. J. Davidson Frame, Managing Projects in Organizations (San Francisco: Jossey-Bass, 1987). T. Gosselin, “What to Do with Last-Minute Jobs,” World Executive Digest, December 1993, p. 70. R. J. Graham, “A Survival Guide for the Accidental Project Manager,” Proceedings of the Annual Project Management Institute Symposium (Drexel Hill, PA: Project Management Institute, 1992), pp. 355–361.
9/16/08 5:02:29 PM
34
CHAPTER 1 / PROJECTS IN CONTEMPORARY ORGANIZATIONS
M. Horner, “Review of ‘Managing People for Project Success,’ ” International Journal of Project Management, 11 (1993): 125–126. P. R. Lawrence and J. W. Lorsch, “Differentiation and Integration in Complex Organizations,” Administrative Science Quarterly, 11, (1967):147. M. Nichols, “Does New Age Business Have a Message for Managers?” Harvard Business Review, March–April 1994, pp. 52–60. L. O’Connor, “Tunnelling Under the Channel,” Mechanical Engineering, December 1993, pp. 60–66. N. Pettersen, “What Do We Know about the Effective Project Manager?” International Journal of Project Management, 9 (1991): 99–104. J. K. Pinto and O. P. Kharbanda, Successful Project Managers: Leading Your Team to Success (New York: Van Nostrand Reinhold, 1995). J. K. Pinto and D. P. Slevin, “Critical Factors in Successful Project Implementation,” IEEE Transactions on Engineering Management, EM-34, 1987, pp. 22–27. B. Z. Posner, “What It Takes to Be a Good Project Manager,” Project Management Journal, 18, 1 (1987): 51–54. W. A. Randolph and B. Z. Posner, “What Every Manager Needs to Know about Project Management,” Sloan Management Review, 29, 4 (1988): 65–73.
81721_Ch01.indd 34
P. Sweet, “A Planner’s Best Friend,” Accountancy, 113 (1994): 56–58. H. J. Thamhain, “Developing Project Management Skills,” Project Management Journal, 22, 3 (1991): 39–53. R. Turner, “Editorial,” International Journal of Project Management, 11 (1993): 195. Questions 1. What are the reasons the author advances for project management to be considered an “accidental profession?” The twelve guidelines are presented in no particular order. Order them by level of importance and explain your reasoning. 2. Where would you place yourself in Figure 2? 3. A few of the guidelines are related to the need to understand the reason for the project in the first place. Which guidelines would you place in this category? Why is this so crucial? 4. Why, in lesson 9, is always thinking about “what if” so important? 5. Lesson 12 warns about not planning enough, but also about spending too much time planning. How do you draw the line?
9/16/08 5:02:29 PM
P
A
R
T
I PROJECT INITIATION
As noted earlier, the material in Part I of this text focuses on project initiation, which relates to the context of the project. Although this material may not appear germane to someone who wants to learn about how to actually run a project, having only the planning and execution tools and being ignorant of the context of the project is a recipe for disaster. It’s like knowing how to sail a ship but not understanding your role as the captain and the purpose of the trip. Project initiation begins with the judicious selection of the organization’s projects to align them with the organization’s overall strategy. Chapter 2 describes how to evaluate and select projects that contribute to the organization’s strategy and discusses the information needed as well as the management of risk during this process. The chapter concludes with a description of an eight-step procedure called the “project portfolio process” that
aligns project selection with the strategy. Chapter 3, “The Project Manager,” concerns the many roles of the project manager (PM), the multiple responsibilities, and some personal characteristics a project manager should possess. It also discusses the problems a PM faces when operating in a multicultural environment. Next, Chapter 4 covers a subject of critical importance to the PM that is almost universally ignored in project management texts: the art of negotiating for resources. The chapter also describes some major sources of interpersonal conflict among members of the project team. Concluding Part I of the book, Chapter 5 discusses various ways to establish the project organization. Different organizational forms are described, as well as their respective advantages and disadvantages. The stafffing of the project team is also discussed.
35
81721_Ch02.indd 35
9/16/08 11:35:42 PM
ftoc.indd 16
10/10/08 5:17:22 PM
C
H
A
P
T
E
R
2 Strategic Management and Project Selection
More and more, the accomplishment of important tasks and goals in organizations today is being achieved through the use of projects. The phrases we hear and read about daily at our work and in conversations with our colleagues, such as “management by projects” and “project management maturity,” reflect this increasing trend in our society. The explosively rapid adoption of such a powerful tool as project management to help organizations achieve their goals and objectives is certainly awesome. In addition to project management’s great utility when correctly used, however, its utility has also led to many misapplications. As noted by one set of scholars (Cleland et al., 1983, p. 155), the rapid adoption of project management means:
• • •
there are many projects that fall outside the organization’s stated mission; there are many projects being conducted that are completely unrelated to the strategy and goals of the organization; and there are many projects with funding levels that are excessive relative to their expected benefits.
What was true 25 years ago, is still true today. In addition to the growth in the number of organizations adopting project management, there is also accelerating growth in the number of multiple, simultaneous, and often interrelated projects in organizations. Thus, the issue naturally arises as to how one manages all these projects. Are they all really projects? (It has been suggested that perhaps up to 80 percent of all “projects” are not actually projects at all, since they do not include the three project requirements for objectives, budget, and due date.) Should we be undertaking all of them? Of those we should implement, what should be their priorities? It is not unusual these days for organizations to be wrestling with hundreds of new projects. With so many ongoing projects it becomes difficult for smaller projects to get adequate support, or even the attention of senior management. Three particularly common problems in organizations trying to manage multiple projects are: 1. Delays in one project cause delays in other projects because of common resource needs or technological dependencies.
37
81721_Ch02.indd 37
9/16/08 11:35:43 PM
38
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
2. The inefficient use of corporate resources results in peaks and valleys of resource utilization. 3. Bottlenecks in resource availability or lack of required technological inputs result in project delays that depend on those scarce resources or technology. As might be expected, the report card on organizational success with management by projects is not stellar. For example, one research study (Thomas et al., 2001) has found that 30 percent of all projects are canceled midstream, and over half of completed projects came in up to 190 percent over budget and 220 percent late. This same study found that the primary motivation of organizations to improve and expand their project management processes was due to major troubled or failed projects, new upcoming mega-projects, or to meet competition or maintain their market share. Those firms that “bought” project management skills from consultants tended to see it as a “commodity.” These firms also commonly relied on outsourcing difficult activities, or even entire projects. Those who developed the skills internally, however, saw project management as offering a proprietary competitive advantage. The latter firms also moved toward recognizing project management as a viable career path in their organization, leading to senior management positions. A major development among those choosing to develop project management expertise in house, particularly those interested in using projects to accomplish organizational goals and strategies, is the initiation of a Project Management Office (PMO), described in detail in Chapter 5. This office strives to develop multi-project management expertise throughout the organization, to evaluate the interrelationships between projects (e.g., such as resource and skill requirements), and to ensure that projects are clearly related to the organization’s goals. It is expected that the PMO will promote those projects that capitalize on the organization’s strengths, offer a competitive advantage, and mutually support each other, while avoiding those with resource or technology needs in areas where the organization has no desire for development. The challenges thus facing the contemporary organization are how to make sure that projects are closely tied to the organization’s goals and strategy, how to handle the growing number of ongoing projects, and how to make these projects more successful, topics we discuss more fully in Section 2.7. The latter two of these objectives concern “project management maturity”—the development of project and multiproject management expertise. Following a discussion of project management maturity, we launch into a major aspect of multiproject management: selecting projects for implementation and handling the uncertainty, or risk, involved. Given that the organization has an appropriate mission statement and strategy, projects must be selected that are consistent with the strategic goals of the organization. Project selection is the process of evaluating individual projects or groups of projects and then choosing to implement some set of them so that the objectives of the parent organization will be achieved. Because considerable uncertainty may surround one’s initial notions of precisely how most projects will be carried out, what resources will be required, and how long it will take to complete the project, we will introduce risk analysis into the selection process. Following this, we illustrate the process of selecting for implementation the set of projects that best meets the strategic goals of the organization, the Project Portfolio Process. Last, the chapter closes with a short discussion of project proposals. Before proceeding, a final comment is pertinent. It is not common to discuss project selection, the construction of a project portfolio, and similar matters in any detail in elementary texts on project management. The project manager typically has little or no say in the
81721_Ch02.indd 38
9/16/08 11:35:43 PM
2.1
PROJECT MANAGEMENT MATURITY
39
project funding decision, nor is he or she usually asked for input concerning the development of organizational strategy. Why then discuss these matters? The answer is simple, yet persuasive. The project manager who does not understand what a given project is expected to contribute to the parent organization lacks critical information needed to manage the project in order to optimize its contribution to the parent organization.
2.1
PROJECT MANAGEMENT MATURITY
PMBOK Guide
As organizations have employed more and more projects for accomplishing their objectives (often referred to as “managing organizations by projects”), it has become natural for senior managers—as well as scholars—to wonder if the organization’s project managers have a mastery of the skills required to manage projects competently. In the last few years, a number of different ways to measure this—referred to as “project management maturity” (Pennypacker et al., 2003)—have been suggested, such as basing the evaluation on PMI’s PMBOK Guide (Lubianiker, 2000; see also www.pmi.org/opm3/) or the ISO 9001 standards (contact the American Society for Quality). To draw the student’s attention to the fact that the following material discusses a critical PMBOK knowledge area, we will insert the PMBOK icon in the left margin of the page to note that we are discussing such a topic.
Project Management in Practice Implementing Strategy through Projects at Blue Cross/Blue Shield
Since strategic plans are usually developed at the executive level, implementation by middle level managers is often a problem due to poor understanding of the organization’s capabilities and top management’s expectations. However, bottom-up development of departmental goals and future plans invariably lacks the vision of the overall market and competitive environment. At Blue Cross/Blue Shield (BC/BS) of Louisiana, this problem was avoided by closely tying project management tools to the organizational strategy. The resulting system provided a set of checks and balances for both BC/BS executives and project managers. Overseeing the system is a newly created Corporate Project Administration Group (CPAG) that helps senior management translate their strategic goals and objectives into project management performance, budget, and schedule targets. These may include new product development, upgrading information systems, or implementing facility automation systems.
81721_Ch02.indd 39
CPAG also works with the project teams to develop their plans, monitoring activities and reports so they dovetail with the strategic intentions. The primary benefits of the system have been that it allows:
• • • •
senior management to select any corporate initiative and determine its status; PMs to report progress in a relevant, systematic, timely manner; all officers, directors, and managers to view the corporate initiatives in terms of the overall strategic plan; and senior management to plan, track, and adjust strategy through use of financial project data captured by the system.
Source: P. Diab, “Strategic Planning Project Management Competitive Advantage,” PM Network, July 1998, pp. 25–28.
9/16/08 11:35:43 PM
40
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
PMBOK Guide
2.2
A number of consulting firms, as well as scholars, have devised formal maturity measures. One of these measures, PM3®, is described by R. Remy (1997). Another maturity model has been devised and applied to 38 organizations in four different industries (Ibbs et al., 2000). This model consists of 148 questions divided into six processes/life-cycle phases (initiating, planning, executing, controlling, closing, and project-driven organization environment), and nine PMBOK knowledge areas (integration, scope, time, cost, quality, human resources, communication, risk, and procurement). The model assesses an organization’s project management maturity in terms of five stages: ad-hoc, planned, managed, integrated, and sustained. Regardless of model form, it appears that most organizations do not score very well in terms of maturity. On one form, about three-quarters are no higher than level 2 (planned) and fewer than 6 percent are above level 3 (managed). On another perspective, the average of the 38 organizations was only slightly over 3, though individual firms ranged between 1.8 and 4.6 on the five-point scale. Next we detail the project selection process, discussing the various types of selection models commonly used, the database needed for selection, and the management of risk.
PROJECT SELECTION AND CRITERIA OF CHOICE Project selection is the process of evaluating proposed projects or groups of projects, and then choosing to implement some set of them so that the objectives of the parent organization will be achieved. This same systematic process can be applied to any area of the organization’s business in which choices must be made between competing alternatives. For example, a manufacturing firm can use evaluation/selection techniques to choose which machine to adopt in a part-fabrication process; a TV station can select which of several syndicated comedy shows to rerun in its 7:30 p.m. weekday time-slot; a construction firm can select the best subset of a large group of potential projects on which to bid; or a hospital can find the best mix of psychiatric, orthopedic, obstetric, and other beds for a new wing. Each project will have different costs, benefits, and risks. Rarely are these known with certainty. In the face of such differences, the selection of one project out of a set is a difficult task. Choosing a number of different projects, a portfolio, is even more complex. In the paragraph just above, all firms except the hypothetical construction firm are considering projects that are “inside” the organization; that is, they are for “clients” within the organization funding the projects. The construction firm is considering a set of potential projects to perform for clients outside of the construction firm itself. Whether for inside or outside clients, the projects will use the organization’s own resources, and both types of projects are usually dealt with as “competing” for the same pool of resources. Only rarely will a project manager be involved in the process by which projects are selected for inclusion in the set of projects the parent organization adopts for investment. It is, however, critically important to the success of the PM that he or she fully understands the parent organization’s objectives in undertaking a project that the PM is expected to lead. As we will see, most of the decisions that the PM is forced to make will have an impact on the degree to which the project contributes to those objectives the parent organization expected from the project. This is not the last time we will note the importance for the PM to understand why his or her project was selected for investment. In the following sections, we discuss several techniques that can be used to help senior managers select projects. Project selection is only one of many decisions associated with project management. To deal with all of these problems, we use models. We need such models because they abstract the relevant issues about a problem from the mass of detail in which the problem is embedded—reality is far too complex to deal with in its entirety. The model allows
81721_Ch02.indd 40
9/16/08 11:35:44 PM
2.2
PROJECT SELECTION AND CRITERIA OF CHOICE
41
us to strip away almost all the reality from a problem, leaving only the relevant aspects of the “real” situation for us to deal with. This process of carving away the unwanted reality from the bones of a problem is called modeling the problem. The model represents the problem’s structure, its form. We will use many models in this book—graphs, analogies, diagrams, as well as flow graph and network models to help solve scheduling problems, and symbolic (mathematical) models for a number of purposes. Models may be quite simple to understand, or they may be extremely complex. In general, introducing more reality into a model tends to make the model more difficult to manipulate. If the input data for a model are not known precisely, we often use probabilistic information; that is, the model is said to be stochastic rather than deterministic. Again, in general, stochastic models are more difficult to manipulate. [Readers who are not familiar with the fundamentals of decision making might find a book such as The New Science of Management Decisions (Simon, 1977) useful. Herbert Simon was a pioneer in the science of decision making and a Nobel Prize winner.] We live in the midst of what has been called the “knowledge explosion.” We frequently hear comments such as “90 percent of all we know about physics has been discovered since Albert Einstein published his original work on special relativity”; and “80 percent of what we know about the human body has been discovered in the past 50 years.” In addition, evidence is cited to show that knowledge is growing exponentially. Such statements emphasize the importance of the management of change. To survive, firms should develop strategies for assessing and reassessing the use of their resources. Every allocation of resources is an investment in the future. Because of the complex nature of most strategies, many of these investments are in projects. The proper choice of investment projects is crucial to the long-run survival of every firm. Daily we witness the results of both good and bad investment choices. In our daily newspapers we read of Cisco System’s decision to purchase firms that have developed valuable communication network software rather than to develop its own software. We read of Procter and Gamble’s decision to invest heavily in marketing its products on the Internet; or problems faced by school systems when they update student computer labs—should they invest in Microsoft®-based systems or stick with their traditional choice, Apple®. But can such important choices be made rationally? Once made, do they ever change, and if so, how? These questions reflect the need for effective selection models. Within the limits of their capabilities, such models can be used to increase profits, select investments competing for limited capital resources, or improve the market position of an organization. They can be used for ongoing evaluation as well as initial selection, and thus are a key to the allocation and reallocation of the organization’s scarce resources. When a firm chooses a project selection model, the following criteria, based on Souder (1973), are most important. 1. Realism The model should reflect the reality of the firm’s decision situation, especially the multiple objectives of both the firm and its managers, bearing in mind that without a common measurement system, direct comparison of different projects is impossible. The model should also take into account the realities of the firm’s limitations on facilities, capital, personnel, and so forth, and include factors that reflect project technical and market risks: performance, cost, time, customer rejection, and implementation. 2. Capability The model should be sophisticated enough to deal with the relevant factors: multiple time periods, situations both internal and external to the project (e.g., strikes, interest rate changes), and so on. 3. Flexibility The model should give valid results within the range of conditions that the firm might experience. It should be easy to modify in response to changes in the firm’s
81721_Ch02.indd 41
9/16/08 11:35:44 PM
42
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
environment; for example, tax law changes, new technological advancements that alter risk levels, and, above all, organizational goal changes. 4. Ease of use The model should be reasonably convenient, not take a long time to execute, and be easy to use and understand. It should not require special interpretation, data that are difficult to acquire, excessive personnel, or unavailable equipment. 5. Cost Data-gathering and modeling costs should be low relative to the cost of the project and less than the potential benefits of the project. All costs should be considered, including the costs of data management and of running the model. We would add the following sixth criterion. 6. Easy computerization It should be easy and convenient to gather and store the information in a computer database, and to manipulate data in the model through use of a widely available, standard computer package such as Excel®. In what follows, we first examine fundamental types of project selection models and the characteristics that make any model more or less acceptable. Next we consider the limitations, strengths, and weaknesses of project selection models, including some suggestions of factors to consider when making a decision about which, if any, of the project selection models to use. We then discuss the problem of selecting projects when significant levels of uncertainty about outcomes, costs, schedules, or technology are present, as well as some ways of managing the risks associated with the uncertainties. Finally, we comment on some special aspects of the information base required for project selection. Then we turn our attention to the selection of a set of projects to help the organization achieve its goals and illustrate this with a technique called the Project Portfolio Process. We finish the chapter with a discussion of project proposals.
2.3
THE NATURE OF PROJECT SELECTION MODELS A model of some sort is implied by any conscious decision, including the selection of projects. The choice between two or more alternative projects requires reference to some objective(s), and the choice is thus made in accord with some, possibly subjective, “model.” Since the development of computers and the establishment of operations research as an academic subject in the mid-1950s, the use of formal, numeric models to assist in decision making has expanded. Many of these models use financial metrics such as profits and/or cash flow to measure the “correctness” of a managerial decision. Project selection decisions are no exception, being based primarily on the degree to which the financial goals of the organization are met. As we will see later, this stress on financial goals, largely to the exclusion of other criteria, raises some serious problems for the firm, irrespective of whether the firm is for-profit or not-for-profit. There are two basic types of project selection models, numeric and nonnumeric. Both are widely used. Many organizations use both at the same time, or they use models that are combinations of the two. Nonnumeric models, as the name implies, do not use numbers as inputs. Numeric models do, but the criteria being measured may be either objective or subjective. It is important to remember that the qualities of a project may be represented by numbers, and that subjective measures are not necessarily less useful or reliable than objective measures. (We will discuss these matters in more detail in Section 2.6.) Before examining specific kinds of models within the two basic types, let us consider just what we wish the model to do for us, never forgetting two critically important, but often overlooked, facts.
81721_Ch02.indd 42
9/16/08 11:35:44 PM
2.3 THE NATURE OF PROJECT SELECTION MODELS
• •
43
Models do not make decisions—people do. The manager, not the model, bears responsibility for the decision. The manager may “delegate” the task of making the decision to a model, but the responsibility cannot be abdicated. All models, however sophisticated, are only partial representations of the reality they are meant to reflect. Reality is far too complex for us to capture more than a small fraction of it in any model. Therefore, no model can yield an optimal decision except within its own, possibly inadequate, framework.
We seek a model to assist us in making project selection decisions. This model should possess the characteristics discussed previously and, above all, it should evaluate potential projects by the degree to which they will meet the firm’s objectives. To construct a selection/ evaluation model, therefore, it is necessary to develop a list of the firm’s objectives. This list of objectives should be generated by top management and might include maintenance of specific market shares, development of an improved image with specific clients or competitors, or expansion into a new line of business, just to mention a few. When the list of objectives has been developed, an additional refinement is recommended. The elements in the list should be weighted. Each item is added to the list because it represents a contribution to the success of the organization, but each item does not make an equal contribution. The weights reflect different degrees of contribution each element makes in accomplishing a set of goals. Once the list of goals has been developed, one more task remains. The probable contribution of each project to each goal should be estimated. A project is selected or rejected because it is predicted to have certain outcomes, if implemented, which contribute to goal achievement. If the estimated level of goal achievement is sufficiently large, the project is selected. In general, the kinds of information required to evaluate a project can be listed under production, marketing, financial, personnel, administrative, and other such categories. Table 2-1 is a list of factors that contribute, positively or negatively, to these categories. In order to give focus to this list, we assume that the projects in question involve the possible substitution of a new production process for an existing one. The list is meant to be illustrative. It certainly is not exhaustive. Clearly, no single project decision need include all these factors; nor are all elements of equal importance. A recent paper by Åstebro (2004) reports on a study of more than 500 R & D projects. He found that four project characteristics were excellent predictors of a project’s commercial success: (1) expected profitability, (2) technological opportunity, (3) development risk, and (4) appropriability, the degree to which a project is appropriate for the organization undertaking it. This finding is particularly important because the experimental design was free of the hindsight bias that is so common in studies of project success and failure. The model correctly predicted almost 80 percent of the project failures and almost 75 percent of the project successes. A major consulting firm has argued (Booz, Allen, and Hamilton, 1966) that the primary cause for the failure of R & D projects is insufficient care in evaluating the proposal before the expenditure of funds. What is true for R & D projects also appears to be true for other kinds of projects, and it is clear that product development projects are more successful if they incorporate user needs and satisfaction in the design process (Matzler et al., 1998). Careful analysis of a potential project is a sine qua non for profitability in the construction business. There are many horror stories (Meredith, 1981) about firms that undertook projects for the installation of a computer information system without sufficient analysis of the time, cost, and disruption involved. Once again, we must emphasize that the tendency of many organizations to depend on profitability models to the exclusion of nonfinancial costs and benefits is a serious mistake. It is not uncommon for the “minor side-effects” of a new product or process to have major
81721_Ch02.indd 43
9/16/08 11:35:45 PM
44
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Table 2–1.
Project Evaluation Factors
Production Factors
1. Time until ready to install 2. Length of disruption during installation 3. Learning curve—time until operating as desired 4. Effects on waste and rejects 5. Energy requirements 6. Facility and other equipment requirements 7. Safety of process 8. Other applications of technology 9. Change in cost to produce a unit output 10. Change in raw material usage 11. Availability of raw materials 12. Required development time and cost 13. Impact on current suppliers 14. Change in quality of output Marketing Factors
1. 2. 3. 4. 5. 6. 7. 8.
Size of potential market for output Probable market share of output Time until market share is acquired Impact on current product line Consumer acceptance Impact on consumer safety Estimated life of output Spin-off project possibilities
Financial Factors
1. Profitability, net present value of the investment 2. Impact on cash flows
3. 4. 5. 6. 7.
Payout period Cash requirements Time until break-even Size of investment required Impact on seasonal and cyclical fluctuations
Personnel Factors
1. 2. 3. 4. 5. 6.
Training requirements Labor skill requirements Availability of required labor skills Level of resistance from current work force Change in size of labor force Inter- and intra-group communication requirements 7. Impact on working conditions Administrative and Miscellaneous Factors
1. 2. 3. 4. 5. 6. 7. 8.
Meet government safety standards Meet government environmental standards Impact on information system Reaction of stockholders and securities markets Patent and trade secret protection Impact on image with customers, suppliers, and competitors Degree to which we understand new technology Managerial capacity to direct and control new process
impacts on the parent organization. Look once more at Table 2-1 and consider how many of the factors listed can impact on a firm in ways not usually included in the direct costs and expenses associated with a potential new product, process, service, marketing campaign, etc. Often, projects intended to alter the organization’s infrastructure—extending engineering software to include new analytic methods or installing a day-care facility for preschool children of employees—can have significant positive effects on worker morale and productivity. On the other hand, replacing workers with new technology may make financial sense but could hurt morale and productivity so much that the change substantially reduces profitability. Later in this chapter we will consider the problem of conducting an evaluation under conditions of uncertainty about the outcomes associated with a project. Before dealing with this problem, however, it helps to examine several different evaluation/selection models and consider their strengths and weaknesses. Recall that the problem of choosing the project selection model itself will also be discussed later.
2.4
TYPES OF PROJECT SELECTION MODELS Of the two basic types of selection models (numeric and nonnumeric), nonnumeric models are older and simpler and have only a few subtypes to consider. We examine them first.
81721_Ch02.indd 44
9/16/08 11:35:45 PM
2.4
TYPES OF PROJECT SELECTION MODELS
45
Nonnumeric Models The Sacred Cow In this case the project is suggested by a senior and powerful official in the organization. Often the project is initiated with a simple comment such as, “If you have a chance, why don’t you look into…,” and there follows an undeveloped idea for a new product, for the development of a new market, for the design and adoption of a global data base and information system, or for some other project requiring an investment of the firm’s resources. The immediate result of this bland statement is the creation of a “project” to investigate whatever the boss has suggested. The project is “sacred” in the sense that it will be maintained until successfully concluded, or until the boss, personally, recognizes the idea as a failure and terminates it. The Operating Necessity If a flood is threatening the plant, a project to build a protective dike does not require much formal evaluation, which is an example of this scenario. XYZ Steel Corporation has used this criterion (and the following criterion also) in evaluating potential projects. If the project is required in order to keep the system operating, the primary question becomes: Is the system worth saving at the estimated cost of the project? If the answer is yes, project costs will be examined to make sure they are kept as low as is consistent with project success, but the project will be funded. The Competitive Necessity Using this criterion, XYZ Steel undertook a major plant rebuilding project in the late 1960s in its steel-bar-manufacturing facilities near Chicago. It had become apparent to XYZ’s management that the company’s bar mill needed modernization if the firm was to maintain its competitive position in the Chicago market area. Although the planning process for the project was quite sophisticated, the decision to undertake the project was based on a desire to maintain the company’s competitive position in that market. In a similar manner, many business schools are restructuring their undergraduate and MBA programs to stay competitive with the more forward-looking schools. In large part, this action is driven by declining numbers of tuition-paying students and the need to develop stronger programs to attract them. Investment in an operating necessity project takes precedence over a competitive necessity project, but both types of projects may bypass the more careful numeric analysis used for projects deemed to be less urgent or less important to the survival of the firm. The Product Line Extension In this case, a project to develop and distribute new products would be judged on the degree to which it fits the firm’s existing product line, fills a gap, strengthens a weak link, or extends the line in a new, desirable direction. Sometimes careful calculations of profitability are not required. Decision makers can act on their beliefs about what will be the likely impact on the total system performance if the new product is added to the line. Comparative Benefit Model For this situation, assume that an organization has many projects to consider, perhaps several dozen. Senior management would like to select a subset of the projects that would most benefit the firm, but the projects do not seem to be easily comparable. For example, some projects concern potential new products, some require the conduct of a research and development project for a government agency, some concern changes in production methods, others concern computerization of certain records, and still others cover a variety of subjects not easily categorized (e.g., a proposal to create a daycare center for employees with small children). The organization has no formal method of selecting projects, but members of the Selection Committee think that some projects will benefit the firm more than others, even if they have no precise way to define or measure “benefit.”
81721_Ch02.indd 45
9/16/08 11:35:45 PM
46
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
The concept of comparative benefits, if not a formal model, is widely adopted for selection decisions on all sorts of projects. Most United Way organizations use the concept to make decisions about which of several social programs to fund. Senior management of the funding organization then examines all projects with positive recommendations and attempts to construct a portfolio that best fits the organization’s aims and its budget. Of the several techniques for ordering projects, the Q-Sort (Helin et al., 1974) is one of the most straightforward. First, the projects are divided into three groups—good, fair, and poor—according to their relative merits. If any group has more than eight members, it is subdivided into two categories, such as fair-plus and fair-minus. When all categories have eight or fewer members, the projects within each category are ordered from best to worst. Again, the order is determined on the basis of relative merit. The rater may use specific criteria to rank each project, or may simply use general overall judgment. (See Figure 2-1 for an example of a Q-Sort.) The process described may be carried out by one person who is responsible for evaluation and selection, or it may be performed by a committee charged with the responsibility. If a committee handles the task, the individual rankings can be developed anonymously, and the set of anonymous rankings can be examined by the committee itself for consensus. It is common for such rankings to differ somewhat from rater to rater, but they do not often vary strikingly because the individuals chosen for such committees rarely differ widely on what they feel to be appropriate for the parent organization. Projects can then be selected in the order of preference, though they are usually evaluated financially before final selection. There are other, similar nonnumeric models for accepting or rejecting projects. Although it is easy to dismiss such models as unscientific, they should not be discounted casually. These models are clearly goal-oriented and directly reflect the primary concerns of the organization. The sacred cow model, in particular, has an added feature; sacred cow projects are
1.
2.
3.
4.
5.
Figure 2-1 The Q-sort method. Source: Souder 1983.
81721_Ch02.indd 46
9/16/08 11:35:46 PM
2.4
TYPES OF PROJECT SELECTION MODELS
47
visibly supported by “the powers that be.” Full support by top management is certainly an important contributor to project success (Meredith, 1981). Without such support, the probability of project success is sharply lowered.
Numeric Models: Profit/Profitability As noted earlier, a large majority of all firms using project evaluation and selection models use profitability as the sole measure of acceptability. We will consider these models first, and then discuss more comprehensive models. Payback Period The payback period for a project is the initial fixed investment in the project divided by the estimated annual net cash inflows from the project. The ratio of these quantities is the number of years required for the project to repay its initial fixed investment. For example, assume a project costs $100,000 to implement and has annual net cash inflows of $25,000. Then Payback period $100,000/$25,000 4 years This method assumes that the cash inflows will persist at least long enough to pay back the investment, and it ignores any cash inflows beyond the payback period. The method also serves as an (inadequate) proxy for risk. The faster the investment is recovered, the less the risk to which the firm is exposed. Discounted Cash Flow Also referred to as the net present value (NPV) method, the discounted cash flow method determines the net present value of all cash flows by discounting them by the required rate of return (also known as the hurdle rate, cutoff rate, and similar terms) as follows: n Ft NPV 1 project 2 A0 a 1 1 k2t t 1 where Ft the net cash flow in period t, k the required rate of return, and A0 initial cash investment (because this is an outflow, it will be negative). To include the impact of inflation (or deflation) where pt is the predicted rate of inflation during period t, we have n Ft NPV 1 project 2 A0 a t t1 1 1 k p t 2 Early in the life of a project, net cash flow is likely to be negative, the major outflow being the initial investment in the project, A0. If the project is successful, however, cash flows will become positive. The project is acceptable if the sum of the net present values of all estimated cash flows over the life of the project is positive. A simple example will suffice. Using our $100,000 investment with a net cash inflow of $25,000 per year for a period of eight years, a required rate of return of 15 percent, and an inflation rate of 3 percent per year, we have 8
NPV 1 project 2 $100,000 a
t 1
$25,000 1 1 0.15 0.03 2 t
5 $1939 Because the present value of the inflows is greater than the present value of the outflow— that is, the net present value is positive—the project is deemed acceptable.
81721_Ch02.indd 47
9/16/08 11:35:46 PM
48
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
PsychoCeramic Sciences, Inc. PsychoCeramic Sciences, Inc. (PSI), a large producer of cracked pots and other cracked items, is considering the installation of a new marketing software package that will, it is hoped, allow more accurate sales information concerning the inventory, sales, and deliveries of its pots as well as its vases designed to hold artificial flowers. The information systems (IS) department has submitted a project proposal that estimates the investment requirements as follows: an initial investment of $125,000 to be paid up-front to the Pottery Software Corporation; an additional investment of $100,000 to modify and install the software; and another $90,000 to integrate the new software into the overall information system. Delivery and installation is estimated to take one year; integrating the entire system should require an additional year. Thereafter, the IS department predicts that scheduled software updates will require further expenditures of about $15,000 every second year, beginning in the fourth year. They will not, however, update the software in the last year of its expected useful life. The project schedule calls for benefits to begin in the third year, and to be up-to-speed by the end of that year. Projected additional profits resulting from better and more timely sales information are estimated to be $50,000 in the first year of operation and are expected to peak at $120,000 in the second year of operation, and then to follow the gradually declining pattern shown in the table at the end of this box.
Year A
2006* 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2015 Total
Inflow B
$
0 0 0 50,000 120,000 115,000 105,000 97,000 90,000 82,000 65,000 35,000 $759,000
Project life is expected to be 10 years from project inception, at which time the proposed system will be obsolete for this division and will have to be replaced. It is estimated, however, that the software can be sold to a smaller division of PSI and will thus have a salvage value of $35,000. PSI has a 12 percent hurdle rate for capital investments and expects the rate of inflation to be about 3 percent over the life of the project. Assuming that the initial expenditure occurs at the beginning of the year and that all other receipts and expenditures occur as lump sums at the end of the year, we can prepare the Net Present Value analysis for the project as shown in the table below. The Net Present Value of the project is positive and, thus, the project can be accepted. (The project would have been rejected if the hurdle rate were 14 percent.) Just for the intellectual exercise, note that the total inflow for the project is $759,000, or $75,900 per year on average for the 10 year project. The required investment is $315,000 (ignoring the biennial overhaul charges). Assuming 10 year, straight line depreciation, or $31,500 per year, the payback period would be: PB
A project with this payback period would probably be considered quite desirable.
Outflow C
Net Flow D ⴝ (B ⴚ C)
$125,000 100,000 90,000 0 15,000 0 15,000 0 15,000 0 0
$125,000 100,000 90,000
$360,000
$315,000 2.9 $75,900 31,500
50,000 105,000 115,000 90,000 97,000 75,000 82,000 65,000 35,000 $399,000
Discount Factor 1/(1 ⴙ k ⴙ p)t
1.0000 0.8696 0.7561 0.6575 0.5718 0.4972 0.4323 0.3759 0.3269 0.2843 0.2472 0.2472
Net Present Value D (Disc. Fact.) $125,000 86,957 68,053
32,876 60,034 57,175 38,909 36,466 24,518 23,310 16,067 8,651 $ 17,997
*t 0 at the beginning of 2006.
81721_Ch02.indd 48
9/16/08 11:35:47 PM
2.4
TYPES OF PROJECT SELECTION MODELS
49
Internal Rate of Return If we have a set of expected cash inflows and cash outflows, the internal rate of return is the discount rate that equates the present values of the two sets of flows. If At is an expected cash outflow in the period t and Rt is the expected inflow for the period t, the internal rate of return is the value of k that satisfies the following equation (note that the A0 will be positive in this formulation of the problem): A0 A1 / 1 1 k 2 A2 / 1 1 k 2 2 c An / 1 1 k 2 n R1 / 1 1 k 2 R2 / 1 1 k 2 2 c Rn / 1 1k 2 n The value of k is found by trial and error. Profitability Index Also known as the benefit–cost ratio, the profitability index is the net present value of all future expected cash flows divided by the initial cash investment. (Some firms do not discount the cash flows in making this calculation.) If this ratio is greater than 1.0, the project may be accepted. Other Profitability Models There are a great many variations of the models just described. These variations fall into three general categories: (1) those that subdivide net cash flow into the elements that comprise the net flow; (2) those that include specific terms to introduce risk (or uncertainty, which is treated as risk) into the evaluation; and (3) those that extend the analysis to consider effects that the project might have on other projects or activities in the organization. Several comments are in order about all the profit-profitability numeric models. First, let us consider their advantages: 1. 2. 3. 4.
The undiscounted models are simple to use and understand. All use readily available accounting data to determine the cash flows. Model output is in terms familiar to business decision makers. With a few exceptions, model output is on an “absolute” profit/profitability scale and allows “absolute” go/no-go decisions. 5. Some profit models can be amended to account for project risk. The disadvantages of these models are the following: 1. These models ignore all nonmonetary factors except risk. 2. Models that do not include discounting ignore the timing of the cash flows and the time–value of money. 3. Models that reduce cash flows to their present value are strongly biased toward the short run. 4. Payback-type models ignore cash flows beyond the payback period. 5. The internal rate of return model can result in multiple solutions. 6. All are sensitive to errors in the input data for the early years of the project. 7. All discounting models are nonlinear, and the effects of changes (or errors) in the variables or parameters are generally not obvious to most decision makers. 8. All these models depend for input on a determination of cash flows, but it is not clear exactly how the concept of cash flow is properly defined for the purpose of evaluating projects. A complete discussion of profit/profitability models can be found in any standard work on financial management—see Ross et al. (2008), for example. In general, the net present value models are preferred to the internal rate of return models. Despite wide use, financial models rarely include nonfinancial outcomes in their benefits and costs. In a discussion of the financial value of adopting project management (that is, selecting as a project the use of project management) in a firm, Githens (1998) notes that traditional financial models “simply cannot capture the complexity and value-added of today’s process-oriented firm.”
81721_Ch02.indd 49
9/16/08 11:35:47 PM
50
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
The commonly seen phrase “return on investment,” or ROI, does not denote any specific method of calculation. It usually involves NPV or internal rate of return (IRR) calculations, but we have seen it used in reference to undiscounted rate of return models and (incorrectly) payback period models. In our experience, the payback period model, occasionally using discounted cash flows, is one of the most commonly used models for evaluating projects and other investment opportunities. Managers generally feel that insistence on short payout periods tends to minimize the risks associated with outstanding monies over the passage of time. While this is certainly logical, we prefer evaluation methods that discount cash flows and deal with uncertainty more directly by considering specific risks. Using the payout period as a cash-budgeting tool aside, its primary virtue is its simplicity. Real Options Recently, a project selection model was developed based on a notion well known in financial markets. When one invests, one foregoes the value of alternative future investments. Economists refer to the value of an opportunity foregone as the “opportunity cost” of the investment made. The argument is that a project may have greater net present value if delayed to the future. If the investment can be delayed, its cost is discounted compared to a present investment of the same amount. Further, if the investment in a project is delayed, its value may increase (or decrease) with the passage of time because some of the uncertainties will be reduced. If the value of the project drops, it may fail the selection process. If the value increases, the investor gets a higher payoff. The real options approach acts to reduce both technological and commercial risk. For a full explanation of the method and its use as a strategic selection tool, see Luehrman (1998a and 1998b). An interesting application of real options as a project selection tool for pharmaceutical R & D projects is described by Jacob et al. (2003). Real options combined with Monte Carlo simulation is compared with alternative selection/assessment methods by Doctor et al. (2001).
Project Management in Practice Project Selection for Spent Nuclear Fuel Cleanup In 1994, Westinghouse Hanford Co., on contract to the Department of Energy’s Hanford Nuclear Fuel Site, reorganized for “projectization” to help Hanford with facility shutdown, decommissioning, and site cleanup. The major project in this overall task was the site cleanup of 2,100 metric tons of degraded spent nuclear fuel slugs submerged beneath 16 feet of water (as a radiation shield) in two rectangular, 25-foot-deep, half-football field–sized basins. Of the over 105,000 slugs, about 6,000 were severely damaged or corroded and leaking radiation into the basin water. The 40-year old basins, located only 400 yards from Washington State’s pristine Columbia River, had an original 20-year design life and were in very poor condition, experiencing major leaks in the late 1970s and again in 1993. Operating and attempting to maintain these “accidents waiting to happen” cost $100,000 a day.
81721_Ch02.indd 50
To address this problem, Westinghouse Hanford went to the site’s stakeholders—the media, activists, regulators, oversight groups, three Indian tribes, government leaders, Congress, and Hanford employees— to determine acceptable options for dealing with this immense problem. It required five months of public discussion for the stakeholders to understand the issues and regain their trust in Hanford. Another two months were required to develop four project options as follows: 1. Better encapsulate the fuel and leave it in the basins. 2. Place the fuel in wet storage elsewhere at Hanford. 3. Place the fuel in dry storage at Hanford. 4. Ship the fuel overseas for reprocessing.
9/16/08 11:35:48 PM
2.4
TYPES OF PROJECT SELECTION MODELS
51
Fuel slug packaging system developed to transport and store fuel capsules.
Following three months of evaluation, the third option was selected and an environmental impact statement (EIS) begun, which required eleven more months to complete (yet half the normal EIS completion time). The project is now underway and was completed December 1999, three years ahead of the
original schedule and thereby saving taxpayers $350 million. Also, the cost of maintaining the fuel is expected to drop to only $3,000 per day. Source: J. C. Fulton, “Complex Problem . . . Simple Concepts . . . Transformed Organization,” PM Network, July 1996, pp. 15–21.
Numeric Models: Scoring In an attempt to overcome some of the disadvantages of profitability models, particularly their focus on a single decision criterion, a number of evaluation/selection models that use multiple criteria to evaluate a project have been developed. Such models vary widely in their complexity and information requirements. The examples discussed illustrate some of the different types of numeric scoring models. Unweighted 0–1 Factor Model A set of relevant factors is selected by management and then usually listed in a preprinted form. One or more raters score the project on each factor, depending on whether or not it qualifies for an individual criterion. The raters are chosen by senior managers, for the most part from the rolls of senior management. The criteria for choice are (1) a clear understanding of organizational goals and (2) a good knowledge of the firm’s potential project portfolio. Figure 2-2 shows an example of the rating sheet for an unweighted, 0–1 factor model. The columns of Figure 2-2 are summed and those projects with a sufficient number of qualifying factors may be selected. The main advantage of such a model is that it uses several criteria in the decision process. The major disadvantages are that it assumes all criteria are of equal importance and it allows for no gradation of the degree to which a specific project meets the various criteria.
81721_Ch02.indd 51
9/16/08 11:35:48 PM
52
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Project _________________________________________________________________________ Rater ____________________________________ Date _________________________________
No increase in energy requirements Potential market size, dollars Potential market share, percent No new facility required No new technical expertise required No decrease in quality of final product Ability to manage project with current personnel No requirement for reorganization Impact on work force safety Impact on environmental standards Profitability Rate of return more than 15% after tax Estimated annual profits more than $250,000 Time to break-even less than 3 years Need for external consultants Consistency with current line of business Inpact on company image With customers With our industry Totals Figure 2-2
Qualifies x x x x
Does Not Qualify
x x x x x x x x x x x x x 12
5
Sample project evaluation form.
Unweighted Factor Scoring Model The second disadvantage of the 0–1 factor model can be dealt with by constructing a simple linear measure of the degree to which the project being evaluated meets each of the criteria contained in the list. The x marks in Figure 2-2 would be replaced by numbers. Often a five-point scale is used, where 5 is very good, 4 is good, 3 is fair, 2 is poor, 1 is very poor. (Three-, seven-, and 10-point scales are also common.) The second column of Figure 2-2 would not be needed. The column of scores is summed, and those projects with a total score exceeding some critical value are selected. A variant of this selection process might choose the highest-scoring projects (still assuming they are all above some critical score) until the estimated costs of the set of projects equaled the resource limit. However, the criticism that the criteria are all assumed to be of equal importance still holds. The use of a discrete numeric scale to represent the degree to which a criterion is satisfied is widely accepted. To construct such measures for project evaluation, we proceed in the following manner. Select a criterion, say, “estimated annual profits in dollars.” For this criterion, determine five ranges of performance so that a typical project, chosen at random, would have a roughly equal chance of being in any one of the five performance ranges. (Another way of describing this condition is: Take a large number of projects that were selected for support in the past, regardless of whether they were actually successful or not, and create five levels of predicted performance so that about one-fifth of the projects fall into each level.) This procedure will usually create unequal ranges, which may offend our sense of symmetry but need not concern us otherwise. It ensures that each criterion performance measure utilizes the full scale of possible values, a desirable characteristic for performance measures.
81721_Ch02.indd 52
9/16/08 11:35:49 PM
2.4
TYPES OF PROJECT SELECTION MODELS
53
Consider the following two simple examples. Using the criterion just mentioned, “estimated annual profits in dollars,” we might construct the following scale: Score 5 4 3 2 1
Performance Level Above $1,100,000 $750,001 to $1,100,000 $500,001 to $750,000 $200,000 to $500,000 Less than $200,000
As suggested, these ranges might have been chosen so that about 20 percent of the projects considered for funding would fall into each of the five ranges. The criterion “no decrease in quality of the final product” would have to be restated to be scored on a five-point scale, perhaps as follows: Score 5 4 3 2 1
Performance Level The quality of the final product is: significantly and visibly improved significantly improved, but not visible to buyer not significantly changed significantly lowered, but not visible to buyer significantly and visibly lowered
This scale is an example of scoring cells that represent opinion rather than objective (even if “estimated”) fact, as was the case in the profit scale. Weighted Factor Scoring Model When numeric weights reflecting the relative importance of each individual factor are added, we have a weighted factor scoring model. In general, it takes the form n
Si a sij w j j 1
where Si the total score of the ith project, sij the score of the ith project on the jth criterion, and w j the weight of the jth criterion. The weights, wj, may be generated by any technique that is acceptable to the organization’s policy makers. There are several techniques available to generate such numbers, but the most effective and most widely used is the Delphi technique. The Delphi technique was developed by Brown and Dalkey of the Rand Corporation during the 1950s and 1960s (Dalkey, 1969). It is a technique for developing numeric values that are equivalent to subjective, verbal measures of relative value. Another popular and quite similar approach is the Analytic Hierarchy Process, developed by Saaty (1990). For an extensive example involving finance, sales, and purchasing, see pages 306–316 of Turban et al. (1994). This example also illustrates the use of Expert Choice®, a software package to facilitate the application of the Analytic Hierarchy Process. Meade et al. (2002) developed a more general form of Saaty’s AHP. They call it the Analytic Network Process,
81721_Ch02.indd 53
9/16/08 11:35:49 PM
54
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
and their paper includes an example of its application to evaluation of multiple R & D projects. (Which reminds us, once more, to caution those who include “technological risk” when evaluating projects. The probability of technical success for any project is 1.0 if there is no limit on time and/or budget. Any estimate of technical success should be accompanied by time and cost constraints, or it is meaningless.) Finally, the use of experts to develop weightings is nicely demonstrated by Jolly (2003) who applies the technique to the development of weights to a technology portfolio. When numeric weights have been generated, it is helpful (but not necessary) to scale the weights so that 0 w j 1
j 1, 2, 3, c, n n
a w j 1
j 1
The weight of each criterion can be interpreted as the “percent of the total weight accorded to that particular criterion.” A special caveat is in order. It is quite possible with this type of model to include a large number of criteria. It is not particularly difficult to develop scoring scales and weights, and the ease of gathering and processing the required information makes it tempting to include marginally relevant criteria along with the obviously important items. Resist this temptation! After the important factors have been weighted, there usually is little residual weight to be distributed among the remaining elements. The result is that the evaluation is simply insensitive to major differences in the scores on trivial criteria. A good rule of thumb is to discard elements with weights less than 0.02 or 0.03. (If elements are discarded, and if you wish g w j 1, the weights must be rescaled to 1.0.) As with any linear model, the user should be aware that the elements in the model are assumed to be independent. This presents no particular problems for these scoring models because they are used to make estimates in a “steady-state” system, and we are not concerned with transitions between states. It is useful to note that if one uses a weighted scoring model to aid in project selection, the model can also serve as an aid to project improvement. For any given criterion, the difference between the criterion’s score and the highest possible score on that criterion, multiplied by the weight of the criterion, is a measure of the potential improvement in the project score that would result were the project’s performance on that criterion sufficiently improved. It may be that such improvement is not feasible or is more costly than the improvement warrants. On the other hand, such an analysis of each project yields a valuable statement of the comparative benefits of project improvements. Viewing a project in this way is a type of sensitivity analysis. We examine the degree to which a project’s score is sensitive to attempts to improve it—usually by adding resources. We will use sensitivity analysis several times in this book. It is a powerful managerial technique. It is not particularly difficult to computerize a weighted scoring model by creating a template on Excel® or one of the other standard computer spreadsheets. In Chapter 13 we discuss an example of a computerized scoring model used for the project termination decision. The model is, in fact, a project selection model. The logic of using a “selection” model for the termination decision is straightforward: Given the time and resources required to take a project from its current state to completion, should we make the investment? A “Yes” answer to that question “selects” for funding the partially completed project from the set of all partially finished and not-yet-started projects.
81721_Ch02.indd 54
9/16/08 11:35:50 PM
2.4
TYPES OF PROJECT SELECTION MODELS
55
Gettin’ Wheels Criteria and Weights for Automobile
Rather than using an example in which actual projects are selected for funding with a weighted factor scoring model (hereafter “scoring model”) that would require tediously long descriptions of the projects, we can demonstrate the use of the model in a simple, common problem that many readers will have faced—the choice of an automobile for purchase. This problem is nicely suited to use of the scoring model because the purchaser is trying to satisfy multiple objectives in making the purchase and is typically faced with several different cars from which to choose. Our model must have the following elements:
Table A. Purchase
1. A set of criteria on which to judge the value of any alternative; 2. A numeric estimate of the relative importance (i.e., the “weight”) of each criterion in the set; and 3. Scales by which to measure or score the performance or contribution–to–value of each alternative on each criterion.
Table B. Automobile Selection Criteria, Measures and Data Sources
The criteria weights and measures of performance must be numeric in form, but this does not mean that they must be either “objective” or “quantitative.” (If you find this confusing, look ahead in this chapter and read the subsection entitled “Measurements” in Section 2.6.) Criteria weights, obviously, are subjective by their nature, being an expression of what the decision maker thinks is important. The development of performance scales is more easily dealt with in the context of our example, and we will develop them shortly. Assume that we have chosen the criteria and weights shown in Table A to be used in our evaluations.* The weights represent the relative importance of the criteria measured on a 10-point scale. The numbers in parentheses show the proportion of the total weight carried by each criterion. (They add to only .99 due to rounding.) Raw weights work just as well for decision making as their percentage counterparts, but the latter are usually preferred because they are a constant reminder to the decision maker of the impact of each of the criteria. *The criteria and weights were picked arbitrarily for this example. Because this is typically an individual or family decision, techniques like Delphi or successive comparisons are not required.
81721_Ch02.indd 55
Appearance Braking Comfort Cost, operating Cost, original Handling Reliability Total
4 3 7 5 10 7 5 41
(.10) (.07) (.17) (.12) (.24) (.17) (.12) .99
Appearance Braking
Subjective judgment, personal Distance in feet, 60–0 mph, automotive magazine a Comfort Subjective judgment, 30 min. road test Cost, operating Annual insurance cost plus fuel cost b Cost, original Dealer cost, auto-cost service c Handling Average speed through standard slalom, automotive magazine a Reliability Score on Consumer Reports, “Frequencyof-Repair” data (average of 2 previous years) a
Many automotive periodicals conduct standardized performance tests of new cars. b Annual fuel cost is calculated as (17,500 mi/DOE ave. mpg) $4.259/gal. c
There are several sources for dealer-cost data (e.g., AAA, which provides a stable database on which to estimate the price of each alternative).
Prior to consideration of performance standards and sources of information for the criteria we have chosen, we must ask, “Are there any characteristics that must be present (or absent) in a candidate automobile for it to be acceptable?” Assume, for this example, that to be acceptable, an alternative must not be green, must have air conditioning, must be able to carry at least four adults, must have at least 10 cubic feet of luggage space, and must be priced less than $34,000. If an alternative violates any of these conditions, it is immediately rejected. For each criterion, we need some way of measuring the estimated performance of each alternative. In this
9/16/08 11:35:50 PM
56
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Scores Criteria
Appearance Braking Comfort Cost, operating* Cost, original* Handling Reliability
1
2
3
4
5
Ugh 165 Bad $2.5 $32.5 45 Worst
Poor 165–150 Poor $2.1–2.5 $26–32.5 45–49.5 Poor
Adequate 150–140 Adequate $1.9–2.1 $21–26 49.5–55 Adequate
Good 140–130 Good $1.6–1.9 $17–21 55–59 Good
WOW 130 Excellent $1.6 $17 59 Excellent
*Cost data in $1000s
Figure A
Performance measures and equivalent scores for selection of an automobile.
case, we might adopt the measures shown in Table B. Our purpose is to transform a measure of the degree to which an alternative meets a criterion into a score, the sij, that is a general measure of the utility or value of the alternative with respect to that criterion. Note that this requires us to define the criterion precisely, as well as to specify a source for the information. Figure A shows the scores for each criterion transformed to a 5-point scale, which will suffice for our ratings. Using the performance scores shown in Figure A, we can evaluate the cars we have identified as our alternatives: the Leviathan 8, the NuevoEcon, the Maxivan, the Sporticar 100, and the Ritzy 300. Each car is scored on each criterion according to the categories shown in Figure A. Then each score is multiplied by the criterion weight and the result is entered into the appropriate box in Figure B. Last, the results for each alternative are summed to represent the weighted score. According to this set of measures, we prefer the Ritzy 300, but while it is a clear winner over the Leviathan 8 and
the Maxivan, and scores about 8 percent better than the Sporticar 100, it rates only about 0.13 points or 4 percent above the NuevoEcon. Note that if we overrated the Ritzy by one point on comfort or handling, or if we underrated the NuevoEcon by one point on either of these criteria, the result would have been reversed. (We assume that the original cost data are accurate.) With the scores this close, we might want to evaluate these two cars by additional criteria (e.g., ease of carrying children, status, safety features like dual airbags or ABS) prior to making a firm decision. All in all, if the decision maker has well-delineated objectives, and can determine how specific kinds of performance contribute to those criteria, and finally, can measure those kinds of performance for each of the alternative courses of action, then the scoring model is a powerful and flexible tool. To the extent that criteria are not carefully defined, performance is not well linked to the criteria, and is carelessly or wrongly measured, the scoring model rests on a faulty foundation and is merely a convenient path to error.
Criteria and Weights
Alternatives
Leviathan 8 NuevoEcon Maxivan Sporticar 100 Ritzy 300 Figure B
81721_Ch02.indd 56
Appearance (0.10)
Braking (0.07)
Comfort (0.17)
Cost, operating (0.12)
Cost, original (0.24)
Handling (0.17)
Reliability (0.12)
3 0.10 0.30 3 0.10 0.30 2 0.10 0.20 5 0.10 0.50 4 0.10 0.40
1 0.07 0.07 3 0.07 0.21 1 0.07 0.07 4 0.07 0.28 5 0.07 0.35
4 0.17 0.68 2 0.17 0.34 4 0.17 0.68 3 0.17 0.51 5 0.17 0.85
2 0.12 0.24 5 0.12 0.60 4 0.12 0.48 2 0.12 0.24 2 0.12 0.24
1 0.24 0.24 4 0.24 0.96 3 0.24 0.72 2 0.24 0.48 1 0.24 0.24
2 0.17 0.34 2 0.17 0.34 1 0.17 0.17 5 0.17 0.85 4 0.17 0.68
3 0.12 0.36 4 0.12 0.48 3 0.12 0.36 2 0.12 0.24 5 0.12 0.60
⌺sijwj
2.23 3.23 2.68 3.10 3.36
Scores for alternative cars on selection criteria.
9/16/08 11:35:51 PM
2.4
TYPES OF PROJECT SELECTION MODELS
57
As was the case with profitability models, scoring models have their own characteristic advantages and disadvantages. The advantages are: 1. These models allow multiple criteria to be used for evaluation and decision making, including profit/profitability models and both tangible and intangible criteria. 2. They are structurally simple and therefore easy to understand and use. 3. They are a direct reflection of managerial policy. 4. They are easily altered to accommodate changes in the environment or managerial policy. 5. Weighted scoring models allow for the fact that some criteria are more important than others. 6. These models allow easy sensitivity analysis. The trade-offs between the several criteria are readily observable. The disadvantages are the following: 1. The output of a scoring model is strictly a relative measure. Project scores do not represent the value or “utility” associated with a project and thus do not directly indicate whether or not the project should be supported. 2. In general, scoring models are linear in form and the elements of such models are assumed to be independent. 3. The ease of use of these models is conducive to the inclusion of a large number of criteria, most of which have such small weights that they have little impact on the total project score. 4. Unweighted scoring models assume all criteria are of equal importance, which is almost certainly contrary to fact. 5. To the extent that profit/profitability is included as an element in the scoring model, this element has the advantages and disadvantages noted earlier for the profitability models themselves. Window-of-Opportunity Analysis In the early stages of new product development, one may know little more than the fact that the potential product seems technically feasible. That one can achieve a new technology does not necessarily imply that the new technology is worth implementing, or economically profitable. Fundamentally, the decision to invest in the development of a new process or product depends on an estimate of cash flows and other benefits expected to result if the innovation is successful—a difficult problem at best. The traditional approach has been to implement the technology in question (or a pilot version of it) and then test it to see if it qualifies as useful and economic. This is often a wasteful process because it assumes the innovation will be successful—a condition not always met in practice. Given some idea for a new product or process, we can invert this traditional approach by attempting to determine the cost, timing, and performance specifications that must be met by this new technology before any R & D is undertaken. (This is called the window-of-opportunity for the innovation.) The method for conducting such an analysis is straightforward. Given a potential production process, for example, the current production process is analyzed in detail and any element of that process that might be affected by the innovation is noted. Baseline data on the current process are collected (e.g., its cycle time, its cost) and the effect of the innovation is estimated relative to (usually some fraction or multiple of) the baseline system. Having thus estimated the economic impact of the innovation, the decision of whether or not to undertake the development project is much simpler. For an example of such an approach see Evans et al. (1985) and Mantel et al. (1985).
81721_Ch02.indd 57
9/16/08 11:35:51 PM
58
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Choosing a Project Selection Model Selecting the type of model to aid the evaluation/selection process depends on the philosophy and wishes of management. Liberatore et al. (1983) conducted a survey of 40 high-level staff persons from 29 Fortune 500 firms. Eighty percent of their respondents report the use of one or more financial models for R & D project decision making. Although their sample is small and nonrandom, their findings are quite consistent with the present authors’ experience. We strongly favor weighted scoring models for three fundamental reasons. First, they allow the multiple objectives of all organizations to be reflected in the important decision about which projects will be supported and which will be rejected. Second, scoring models are easily adapted to changes in managerial philosophy or changes in the environment. Third, they do not suffer from the bias toward the short run that is inherent in profitability models that discount future cash flows. This is not a prejudice against discounting and most certainly does not argue against the inclusion of profits/profitability as an important factor in selection, but rather it is an argument against the exclusion of nonfinancial factors that may require a longer-run view of the costs and benefits of a project. For a powerful statement of this point, see Hayes et al. (1980). It is also interesting to note that Liberatore et al. (1983, p. 969) found that firms with a significant amount of contract research funded from outside the organization used scoring models for project screening much more frequently than firms with negligible levels of outside funding. It was also found that firms with significant levels of outside funding were much less likely to use a payback period. The structure of a weighted scoring model is quite straightforward. Its virtues are many. Nonetheless, the actual use of scoring models is not as easy as it might seem. Decision makers are forced to make difficult choices and they are not always comfortable doing so. They are forced to reduce often vague feelings to quite specific words or numbers. Multiattribute, multiperson decision making is not simple. [For an interesting discussion of this process, see Irving et al. (1988).]
2.5
ANALYSIS UNDER UNCERTAINTY — THE MANAGEMENT OF RISK
PMBOK Guide
81721_Ch02.indd 58
During the past several years, increasing attention has been paid to the subject of managing some of the risks inherent in most projects. The subject first appeared in PMI’s 1987 edition of A Guide to the Project Management Body of Knowledge (Project Management Institute, 2001), more commonly referred to as PMBOK. As noted earlier, although some PMBOK knowledge areas, such as Procurement, can largely be treated as standalone issues and discussed in a single section or chapter, Risk is not one of them. Hence, the topic of risk will be treated throughout this book wherever it is relevant, which is quite often. Further discussions of risk will be found in Sections 5.6 and 6.1, and throughout Chapters 10 and 11. For the most part, risk has been interpreted as being unsure about project task durations and/or costs, but uncertainty plagues all aspects of the work on projects and is present in all stages of project life cycles. In this section, we will consider uncertainty as it affects the selection process. The impact of imperfect knowledge on the way a project is organized and on its budget and schedule will be discussed in the chapters devoted to those subjects. Before proceeding, it is useful to discuss briefly the distinction between two words, “risk” and “uncertainty.” The outcome of any decision depends on two things: (1) what the decision
9/16/08 11:35:51 PM
2.5
ANALYSIS UNDER UNCERTAINTY—THE MANAGEMENT OF RISK
59
maker does; and (2) what nature does—“nature” being the set of exogenous factors that interact with the decision maker’s course of action to produce an outcome. If the decision maker knows the probability of each and every state of nature and thus of each and every outcome, she can find the expected value of each alternative course of action she has. The expected value of a specific action is the sum of the values of each outcome associated with the action times the probability that it will occur. She can select the course of action associated with the best of these expected values. This is decision making under conditions of risk. If the decision maker’s information is not so complete and she does not know and cannot collect sufficient data to determine the probability of occurrence for some states of nature, she cannot find the expected value for each of her alternative actions. This is decision making under conditions of uncertainty. There is no way to solve problems under uncertainty without altering the nature of the problem. One can estimate, guess, or call “Psychic Friend” to assume some probability for each known state of nature and then deal with the problem as if it were one of risk. If the decision maker elects to ignore all states of nature except the one she thinks most likely, she then assumes there is one and only one possible outcome—which is decision making under conditions of certainty. Finally, the decision maker could assume that an opponent controls the state of nature and try to use game theory to solve her problem of decision making under conditions of conflict. In the real world of project management, it has been common to deal with estimates of task durations, costs, etc. as if the information were known with certainty. On occasion, project task workers inflated times and costs and deflated specifications on the grounds that the boss would arbitrarily cut the project budget and duration and add to the specifications, thereby treating the problem as a decision under conflict with the boss as an opponent. In fact, a great majority of all decisions made in the course of managing a project are actually made under conditions of uncertainty. In general, we will adopt the view that it is usually best to act as if decisions were made under conditions of risk. This will force us to make some estimates about the probability of various outcomes. If we use appropriate methods for doing this, we can apply what knowledge we have to solving project decision problems. We will not always be correct, but we will be doing the best we can. Such estimates are called “subjective probabilities,” and are dealt with in most elementary courses on probability and statistics. While such probabilities are no more than guesses, they can be processed just as empirically determined probabilities are. In the world of project management, a best guess is always better than no information at all. Now we can examine some of the effects of uncertainty on project selection. At times, an organization may wish to evaluate a project about which there is little information. R & D projects sometimes fall into this general class. But even in the comparative mysteries of R & D activities, the level of uncertainty about the outcomes of R & D is not beyond analysis. As we noted earlier, there is actually not much uncertainty about whether a product, process, or service can be developed, but there can be considerable uncertainty about when it will be developed and at what cost. As they are with R & D projects, time and cost are also often uncertain in other types of projects. When the organization undertakes projects in which it has little or no recent experience—for example, the installation of a computer network, investment in an unfamiliar business, engaging in international trade, and a myriad of other projects common enough to organizations, in general, but uncommon to any single organization—there are three distinct areas of uncertainty. First, there is uncertainty about the timing of the project and the cash flows it is expected to generate. Second, though not as common as generally believed, there may be uncertainty about the direct outcomes of the project—that is, what it will accomplish. Third, there is uncertainty about the side effects of the project—its unforeseen consequences.
81721_Ch02.indd 59
9/16/08 11:35:52 PM
60
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Typically, we try to reduce such uncertainty by the preparation of pro forma documents. Pro forma profit and loss statements and break-even charts are examples of such documents. The results, however, are not very satisfactory unless the amount of uncertainty is reflected in the data that go into the documents. When relationships between inputs and outputs in the projects are complex, Monte Carlo simulation (Evans et al., 1998) can handle such uncertainty by exposing the many possible consequences of embarking on a project. Risk analysis is a method based on such a procedure. With the great availability of microcomputers and user-friendly software (e.g., Crystal Ball®), these procedures are becoming very common.
Risk Analysis and Simulation As we have noted, risk analysis techniques will be introduced when they are relevant to a problem at hand. The information associated with project selection is characterized by uncertainty and is thus appropriate for the application of risk analysis. Before proceeding to demonstrate analytic techniques, however, it is helpful to understand the underlying nature of risk analysis. The duration of project activities, the amounts of various resources that will be required to complete a project, the estimates made of the value of accomplishing a project, all these and many other aspects of a project are uncertain. While a project manager may be able to reduce uncertainty, it cannot be eliminated. Decisions must be made in the face of the ambiguity that results from uncertain information. Risk analysis does not remove the ambiguity, it simply describes the uncertainties in a way that provides the decision maker with a useful insight into their nature. To apply risk analysis, one must make assumptions about the probability distributions that characterize key parameters and variables associated with a decision and then use these to estimate the risk profiles or probability distributions of the outcomes of the decision. This can be done analytically or by Monte Carlo simulation, an easy-to-use technique that is well-adapted to evaluating the risk in certain situations. When the decisions involve several input variables or parameters, simulation is highly preferable to the tedious calculations required by analytic methods. The simulation software (in our case Crystal Ball®, an Excel® Add-In) allows the decision to be represented by a mathematical model and then selects samples from the assumed distributions for each input. The software then plugs these inputs into the model and finds the outcome(s) of the decision. David Matheson, CEO of SmartOrg Inc. in California (Gale, 2007) says that “Vague terms lead to bad decisions. You need to define success in quantifiable terms so that everyone is on the same page . . . you need robust ways to discuss uncertainties quantified in the language of probability.” By assigning monetary values to risks and balancing them against projected profitabilities, project portfolio (see Section 2.7) managers have a way to make project selection decisions. Simulation is the perfect tool to do this! This process is repeated many times and the statistical distribution of the outcomes is then displayed. The object of this process is to show the decision maker the distribution of the outcomes. This risk profile is used to assess the value of the decision along with other factors that might be relevant such as strategic concerns, socio/political factors, and impact on market share. Following a few comments about the nature of the input data and assumptions as in the case of R & D projects, we illustrate the use of Crystal Ball® (CB) to aid in the project selection decision. We show other applications of CB simulation again in Chapter 8, to determine the likelihood of project completion by various times; and in Chapter 9 where we simulate the “critical chain” of events in a project.
81721_Ch02.indd 60
9/16/08 11:35:52 PM
2.5
ANALYSIS UNDER UNCERTAINTY—THE MANAGEMENT OF RISK
61
Project Management in Practice Simulating the Failure of California’s Levees
California’s 2600-mile long system of levees east of San Francisco is arguably the most worrisome infrastructure risk in America—called a “ticking time bomb” by some—whose failure would top the economic cost of Katrina. The berms supporting the levees protect half a million people, 4 million acres of farmland, and the drinking water supply for most of southern California. To help decide where to invest to protect these levees, a gigantic threat-assessment simulation software program is being used. It was
constructed after Hurricane Katrina by 300 top scientists and engineers to see how waves and flood waters from 152 computer-simulated storms might swamp New Orleans. The software is being modified for California where the greater threat is earthquakes, but California has seven times the length of levees as New Orleans and they’re in worse condition. Source: A. Aston and M. Arndt. “If the Levees Fail in California,” Business Week, August 20 & 27, 2007.
General Simulation Analysis Simulation combined with sensitivity analysis is also useful for evaluating R & D projects while they are still in the conceptual stage. Using the net present value approach, for example, we would support an R & D project if the net present value of the cash flows (including the initial cash investment) is positive and represents the best available alternative use of the funds. When these flows are estimated for purposes of analysis, it is well to avoid the full-cost philosophy that is usually adopted. The full-cost approach to estimating cash flows necessitates the inclusion of arbitrarily determined overheads in the calculation—overheads which, by definition, are not affected by change in product or process and, thus, are not relevant to the decision. The only relevant costs are those that will be changed by the implementation of the new process or product. The determination of such costs is not simple. If the concept being considered involves a new process, it is necessary to go to the detailed route sheet, or operations sequence sheet,
81721_Ch02.indd 61
9/16/08 11:35:52 PM
62
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
describing the operation in which the new process would be used. Proceeding systematically through the operating sequence step-by-step, one asks whether the present time and cost required for this step are likely to be altered if the new process concept is installed. If, and only if, the answer is yes, three estimates (optimistic, most likely, and pessimistic) are made of the size of the expected change. These individual estimated changes in production cost and time, together with upstream- or downstream-time and cost changes that might also result (e.g., a production method change on a part might also alter the cost of inspecting the final product), are used to generate the required cash flow information—presuming that the time savings have been properly costed. This estimation process will be explained in detail in Chapter 8. The analysis gives a picture of the proposed change in terms of the costs and times that will be affected. The uncertainty associated with each individual element of the process is included. Simulation runs will then indicate the likelihood of achieving various levels of savings. Note also that investigation of the simulation model will expose the major sources of uncertainty in the final cost distributions. Those without considerable experience in simulation should use this tool with caution. Simulation software is indifferent to assumptions-contrary-to-fact, and cares not a wit that the experimenter specifies a statistical distribution that implies a universe that never was nor ever will be. In such cases, the results of the simulation—often taken by the unwary as an estimate of reality—are apt to mislead.
PsychoCeramic Sciences Revisited* There is great value in performing risk analysis in order to confront the uncertainties in project selection. Reconsider the PsychoCeramic Sciences example we solved in the section devoted to finding the discounted cash flows associated with a project. Setting this problem up on Excel® is straightforward and the earlier solution is shown here in Table 2-2 for convenience. Another advantage of using Excel® is that we can simply use the NPV function to find the net present values; however, for pedagogic purposes and consistency we will continue with the previous method of solution. We found that the project cleared the barrier of a 12 percent hurdle rate for acceptance. The net cash flow over the project’s life is just under $400,000, and discounted at the hurdle rate plus 3 percent annual inflation, the net present value of the cash flow is about $18,000. The rate of inflation is shown in a separate column because it is another uncertain variable that should be included in the risk analysis. Now let us assume that the expenditures in this example are fixed by contract with an outside vendor. Thus, there is no uncertainty about the outflows, but there is, of course, uncertainty about the inflows. Assume that the estimated inflows are as shown in Table 2-3 and include a most likely estimate, a minimum (pessimistic) estimate, and a maximum (optimistic) estimate. (In Chapters 7, “Budgeting and Cost Estimation” and 8, “Scheduling,” we will deal in more detail with the methods and meaning of making such estimates.) Both the beta and the triangular statistical distributions are well suited for modeling variables with these three parameters, but fitting a beta distribution is complicated and not particularly intuitive. Therefore, we will assume that the triangular distribution will give us a reasonably good fit for the inflow variables. The hurdle rate of return is fixed by the firm, so the only remaining variable is the rate of inflation that is included in finding the discount factor. We have assumed a 3 percent rate with a normal distribution, plus or minus 1 percent (i.e., 1 percent represents three standard deviations). *Occasionally, particular sections will be shaded, meaning that they can be skipped without loss of continuity.
81721_Ch02.indd 62
9/16/08 11:35:53 PM
2.5
ANALYSIS UNDER UNCERTAINTY—THE MANAGEMENT OF RISK
63
It is important to remember that other approaches in which only the most likely estimate of each variable is used are equivalent to an assumption of certainty. The major benefit of simulation is that it allows all possible values for each variable to be considered. Just as the distribution of possible values for a variable is a better reflection of reality (as the estimator sees reality) than a single “most likely” value, the distribution of outcomes developed by simulation is a better forecast of uncertain future reality than a forecast of any single outcome can be. As any security analyst knows, a forecast of corporate quarterly earnings of $0.50–0.58 per share is far more likely to be accurate than a forecast of $0.54 per share. In general, precise forecasts will be precisely wrong.
Table 2-2.
Single-Point Estimate of the Cash Flows for PsychoCeramic Sciences, Inc.
A
1 2 3 4
Year A 2006*
5 6
B
C
D
E
F
Discount Net Present Net Flow Factor Value D 5 1 B 2 C 2 1/ 1 1 1 K 1 p 2 t D 3 1 Disc. Factor 2 $125,000 1.0000 $125,000
G
Inflow B $0
Outflow C $125,000
Inflation Rate 0.03
2006
100,000
100,000
0.8696
$86,957
0.03
2007
90,000
$90,000
0.7561
$68,053
0.03
7
2008
50,000
$50,000
0.6575
$32,876
0.03
8
2009
120,000
15,000
$105,000
0.5718
$60,034
0.03
9
2010
115,000
$115,000
0.4972
$57,175
0.03
10
2011
105,000
15,000
$90,000
0.4323
$38,909
0.03
11
2012
97,000
$97,000
0.3759
$36,466
0.03
12
2013
90,000
15,000
$75,000
0.3269
$24,518
0.03
13
2014
82,000
$82,000
0.2843
$23,310
0.03
14
2015
65,000
$65,000
0.2472
$16,067
0.03
15
2015
35,000
$35,000
0.2472
$8,651
Total
$759,000
16 17
$360,000
$399,000
$17,997
18 *t 0 at the beginning of 2006
19 20 21
Formulae
22
Cell D4
1 B4-C4 2 copy to D5:D15
23
Cell E4
1/ 1 1 .12 G4 2 ^0
24
Cell E5
1/ 1 1 .12 G5 2 ^1
25
Cell E6
1/ 1 1 .12 G6 2 ^ 1 A62005 2
26
Cell F4
D4pE4
27
Cell B17
Sum(B4:B15)
81721_Ch02.indd 63
copy to E7:E15
copy to F5:F15 copy to C17, D17, F17
9/16/08 11:35:53 PM
64
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Using CB to run a Monte Carlo simulation requires us to define two types of cells in the Excel® spreadsheet. The cells that contain variables or parameters are defined as assumption cells. For the PsychoCeramic Sciences case, these are the cells in Table 2-2, columns B and G, the inflows and the rate of inflation, respectively. The cells that contain outcomes of the model are called forecast cells, cell F17 in Table 2-2. Each forecast cell typically contains a formula that is dependent on one or more of the assumption cells. Simulations may have many assumption and forecast cells, but they must have at least one of each. To illustrate the process of defining an assumption cell, consider cell B7, the cash inflow estimate for 2008. We can see from Table 2-3 that the minimum expected cash inflow is $35,000, the most likely cash flow is $50,000, and the maximum is $60,000. Also remember that we decided to model all these flows with a triangular distribution. Once one has entered the original information in Table 2-2, the process of defining the assumption cells and entering the pessimistic and optimistic data is straightforward and involves six steps:* 1. Click on cell B7 to identify it as the relevant assumption cell. 2. Select the menu option Cell at the top of the screen. 3. From the dropdown menu that appears, select Define Assumption. CB’s Distribution Gallery is now displayed as shown in Figure 2-3. 4. CB allows you to choose from a wide variety of probability distributions. Double-click on the Triangular box to select it. 5. CB’s Triangular Distribution dialog box is displayed as in Figure 2-4. In the Assumption Name textbox at the top of the dialog box enter a descriptive label, e.g., Cash Inflow-2008. Then, enter the pessimistic, most likely, and optimistic costs of $35,000, $50,000, and $60,000 in the Min, Likeliest, and Max boxes, respectively. 6. Click on the OK button. When you do this step, note that the inflow in cell B7 changes from the most likely entry to the mean of the triangular distribution which is 1 Min Likeliest Max 2 /3.
Table 2-3. Pessimistic, Most Likely, and Optimistic Estimates of the Cash Flows for PsychoCeramic Sciences, Inc. Year
2008 2009 2010 2011 2012 2013 2014 2015 2015 Total
Minimum Inflow
$35,000 95,000 100,000 88,000 80,000 75,000 67,000 51,000 30,000 $621,000
Most Likely Inflow
Maximum Inflow
$50,000 120,000 115,000 105,000 97,000 90,000 82,000 65,000 35,000 $759,000
$60,000 136,000 125,000 116,000 108,000 100,000 91,000 73,000 38,000 $847,000
*It is generally helpful for the reader to work the problem as we explain it. If Crystal Ball® has been installed on your computer but is not running, select Tools, and then Add-Ins from Excel®’s menu. Next, click on the CB checkbox and select OK. If the CB Add-In has not been installed on your computer, consult your Excel® manual and the CD-ROM that accompanies this book to install it.
81721_Ch02.indd 64
9/16/08 11:35:55 PM
2.5
Figure 2-3
ANALYSIS UNDER UNCERTAINTY—THE MANAGEMENT OF RISK
65
Crystal Ball®’s Distribution Gallery.
Figure 2-4 Crystal Ball® dialog box for model inputs assuming the triangular distribution.
Now repeat steps 1–6 for the remaining cash flow assumption cells (cells B8:B15). Remember that the proper information to be entered is found in Table 2-3. When finished with the cash flow cells, repeat the six-step procedure for assumption cells G4:G15. For this assumption select the Normal distribution and the entry for each cell in the series will be identical. We decided earlier to use a 3 percent inflation rate, plus or minus 1 percent. Recall that the normal distribution is “bell-shaped” and that the mean of the distribution is its center point. Also recall that the mean, plus or minus three standard deviations, includes 99 percent of the data. The normal distribution dialog box, Figure 2-5, calls for the distribution’s mean
81721_Ch02.indd 65
9/16/08 11:35:55 PM
66
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Figure 2-5
Crystal Ball® dialog box for model inputs assuming the normal distribution.
and its standard deviation. The mean will be 0.03 (3 percent) for all cells. The standard deviation will be .0033 (one third of 1 percent) for all cells. (Note that Figure 2-5 displays only the first two decimal places of the standard deviation. The actual standard deviation of .0033 is used by the program.) As you enter this data you will note that the distribution will show a mean of 3 percent and a range from 2 percent to 4 percent. Note that there are two cash flows for the year 2006, but one of those occurs at the beginning of the year and the other at the end of the year. The entry at the beginning of the year is not discounted so there is no logical reason for an entry in G-4. CB seems to like one, however, so go ahead and enter it. In the Assumption Name: textbox for the G4 entry type Inflation rate—2005. Each of the following entries should be labeled with its appropriate year. The year 2015 raises a similar problem with two cash flows, but these both occur at the end of the year. When you constructed the spreadsheet, you probably copied cell E6 to the range E7:E15. If the inflation rate is fixed at 3 percent, that raises no problem, but when we make the inflation rate a random variable, that would allow G14 and G15, inflation for 2015, to be different. The fix is simple. First, click on E15. Then press the key F2. This shows the formula for E15 in its cell and it should appear as follows: 1/(1 0.12 G15)^(A15-2005). Move your cursor next to the “5” in “G15.” Delete the “5” and change it to “4.” You may now delete the entry in cell G15; the same inflation rate will now be used for both 2015 calculations.* Now we consider the forecast or outcome cell. In this example we wish to find the net present value of the cash flows we have estimated. The process of defining a forecast cell involves five steps. 1. Click on the cell F17 to identify it as containing an outcome that interests us. 2. Select the menu option Cell at the top of the screen. 3. From the dropdown menu that appears, select Define Forecast . . . *You may wonder why we spend time with this kind of detail. The reason is simple. Once you have dealt with this kind of problem, and it is common in such analyses, you won’t make this mistake in the real world where having such errors called to your attention may be quite painful.
81721_Ch02.indd 66
9/16/08 11:35:56 PM
2.5
Figure 2-6
ANALYSIS UNDER UNCERTAINTY—THE MANAGEMENT OF RISK
67
Crystal Ball® dialog box for the model forecast or outcome.
4. CB’s Define Forecast dialog box is now displayed as shown in Figure 2-6. In the Forecast Name: textbox, enter a descriptive name such as Net Present Value of Project. Then enter a descriptive label such as Dollars in the Units: textbox. 5. Click OK. There is only one Forecast cell in this example, but there may be several. Use the same five steps for each. When you have completed all entries, what was Table 2-2 is now changed and appears as Table 2-4. We are now ready to simulate. CB randomly selects a value for each assumption cell based on the probability distributions we specified and then calculates the net present value of the cell values selected. By repeating this process many times we can get a sense of the distribution of possible outcomes. To simulate the model you have constructed 1,000 times, select the Run menu item from the toolbar at the top of the page. In the dropdown box that appears, select Run Preferences. In the Run Preferences dialog box that appears, enter 1,000 in the Maximum Number of Trials textbox and then click OK. To perform the simulation, select the Run menu item again and then Run from the dropdown menu. CB summarizes the results of the simulation in the form of a frequency chart that changes as the simulations are executed. See the results of one such run in Figure 2-7. CB provides considerable information about the forecast cell in addition to the frequency chart including percentile information, summary statistics, a cumulative chart, and a reverse cumulative chart. For example, to see the summary statistics for a forecast cell, select View from the toolbar and then select Statistics from the dropdown menu that appears. The Statistics view for the frequency chart (Figure 2-7) is illustrated in Figure 2-8. Figure 2-8 contains some interesting information. Both the mean and median outcomes from the simulation are nicely positive and thus well above the hurdle rate of 12 percent.
81721_Ch02.indd 67
9/16/08 11:35:56 PM
68
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Table 2-4. Three-Point Estimates of Cash Flows and Inflation Rate for PsychoCeramic Sciences, Inc. All Assumptions and Forecast Cells Defined.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
A
B
C
D
Year A 2006* 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2015
Inflow B $0 0 0 48,333 117,000 113,333 103,000 95,000 88,333 80,000 63,000 34,333
Outflow C $125,000 100,000 90,000 0 15,000 0 15,000 0 15,000 0 0
Net Flow D ⴝ (B ⴚ C) $125,000 100,000 $90,000 $48,333 $102,000 $113,333 $88,00 $95,000 $73,333 $80,000 $63,000 $34,333
Total
$742,333 $360,000 $382,333 *t 0 at the beginning of 2006
Figure 2-7 project.
E Discount Factor 1/(1 ⴙ K ⴙ p)t 1.0000 0.8696 0.7561 0.6575 0.5718 0.4972 0.4323 0.3759 0.3269 0.2843 0.2472 0.2472
F Net Present Value D ⴛ (Disc. Factor) $125,000 $86,957 $68,053 $31,780 $58,319 $56,347 $38,045 $35,714 $23,973 $22,741 $15,573 $8,487
G Inflation Rate 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03
$10,968
Frequency chart of the simulation output for net present value of PsychoCeramic Sciences
There are, however, several negative outcomes and those are below the hurdle rate. What is the likelihood that this project will achieve an outcome at or above the hurdle rate? With CB, the answer is easy. Using the display shown in Figure 2-9, erase –Infinity from the box in the lower left corner. Type $0 (or $1) in that box and press Enter. Figure 2-7 now changes as shown in Figure 2-9. The boxes at the bottom of Figure 2-9 show that given our estimates
81721_Ch02.indd 68
9/16/08 11:35:56 PM
2.5
ANALYSIS UNDER UNCERTAINTY—THE MANAGEMENT OF RISK
69
Figure 2-8 Summary statistics of the simulation output for net present value of PsychoCeramic Sciences project.
Figure 2-9 Calculating the probability that the net present value of the PsychoCeramic Sciences project is equal to or greater than the firm’s hurdle rate.
and assumptions of the cash flows and the rate of inflation, there is a .90 probability that the project will yield an outcome at or above the 12 percent hurdle rate. Even in this simple example the power of including uncertainty in project selection should be obvious. Because a manager is always uncertain about the amount of uncertainty, it is also possible to examine various levels of uncertainty quite easily using CB. We could, for instance, alter the degree to which the inflow estimates are uncertain by expanding or contracting the degree to which optimistic and pessimistic estimates vary around the most likely estimate. We could increase or decrease the level of inflation. Simulation runs made with these changes provide us with the ability to examine just how sensitive the outcomes (forecasts) are to possible errors in the input data. This allows us to focus on the important risks and to ignore those that have little effect on our decisions.
81721_Ch02.indd 69
9/16/08 11:35:57 PM
70
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
2.6
COMMENTS ON THE INFORMATION BASE FOR SELECTION Our bias in favor of weighted scoring models is quite clear and weighted scoring models can be simulated because both the scores and the weights are usually estimates. But irrespective of which model is chosen for project selection, a database must be created and maintained to furnish input data for the model. Directions for the actual construction of the database go beyond the scope of this book, but some comments about the task are in order. The use of any project selection model assumes that the decision-making procedure takes place in a reasonably rational organizational environment. Such is not always the case. In some organizations, project selection seems to be the result of a political process, and sometimes involves questionable ethics, complete with winners and losers (Baker et al., 1995). In others, the organization is so rigid in its approach to decision making that it attempts to reduce all decisions to an algorithmic proceeding in which predetermined programs make choices so that humans have minimal involvement—and responsibility. Here too, Saaty’s (1990) Analytic Hierarchy Process can lend rationality to a sometimes irrational process. In an interesting paper, Huber (1981) examines the impact that the organizational environment has on the design of decision support systems. The remainder of this section deals with three special problems affecting the data used in project selection models.
Accounting Data Whether managers are familiar with accounting systems or not, they can find it useful to reflect on the methods and assumptions used in the preparation of accounting data. Among the most crucial are the following: 1. Accountants live in a linear world. With few exceptions, cost and revenue data are assumed to vary linearly with associated changes in inputs and outputs. 2. The accounting system often provides cost-revenue information that is derived from standard cost analyses and equally standardized assumptions regarding revenues. These standards may or may not be accurate representations of the cost-revenue structure of the physical system they purport to represent. 3. As noted in the previous section, the data furnished by the accounting system may or may not include overhead costs. In most cases, the decision maker is concerned solely with cost-revenue elements that will be changed as a result of the project under consideration. Incremental analysis is called for, and great care should be exercised when using pro forma data in decision problems. Remember that the assignment of overhead cost is always arbitrary. The accounting system is the richest source of information in the organization, and it should be used—but with great care and understanding.
Measurements It is common for those who oppose a project, for whatever reason, to complain that information supporting the project is “subjective.” This epithet appears to mean that the data are biased and therefore untrustworthy. To use the scoring methods discussed or to practice risk management in project selection, we need to represent, though not necessarily collect, expected project performance for each criterion in numeric form. If a performance characteristic cannot be measured directly as a number, it may be useful to characterize performance verbally and then, through a word/number equivalency scale, use the numeric equivalents of verbal characterizations as model inputs.
81721_Ch02.indd 70
9/16/08 11:35:57 PM
2.6
COMMENTS ON THE INFORMATION BASE FOR SELECTION
71
Subjective versus Objective The distinction between subjective and objective is generally misunderstood. All too often the word objective is held to be synonymous with fact and subjective is taken to be a synonym for opinion—where fact true and opinion false. The distinction in measurement theory is quite different, referring to the location of the standard for measurement. A measurement taken by reference to an external standard is said to be “objective.” Reference to a standard that is internal to the system is said to be “subjective.” A yardstick, incorrectly divided into 100 divisions and labeled “meter,” would be an objective but inaccurate measure. The eye of an experienced judge is a subjective measure that may be quite accurate. Quantitative versus Qualitative The distinction between quantitative and qualitative is also misunderstood. It is not the same as numeric and nonnumeric. Both quantity and quality may be measured numerically. The number of words on this page is a quantity. The color of a red rose is a quality, but it is also a wavelength that can be measured numerically, in terms of microns. The true distinction is that one may apply the law of addition to quantities but not to qualities (van Gigch, 1978). Water, for example, has a volumetric measure and a density measure. The former is quantitative and the latter qualitative. Two one-gallon containers of water poured into one larger container give us two gallons, but the density of the water, before and after joining the two gallons, is still the same: 1.0 grams per cubic centimeter (1.0 g/cm3). Reliable versus Unreliable A data source is said to be reliable if repetitions of a measurement produce results that vary from one another by less than a prespecified amount. The distinction is important when we consider the use of statistical data in our selection models. Valid versus Invalid Validity measures the extent to which a piece of information actually means what we believe it to mean. A measure may be reliable but not valid. Consider our mismarked 36-inch yardstick pretending to be a meter. It performs consistently, so it is reliable. It does not, however, match up accurately with other meter rules, so it would not be judged valid. To be satisfactory when used in the previous project selection models, the measures may be either subjective or objective, quantitative or qualitative, but they must be numeric, reliable, and valid. Avoiding information merely because it is subjective or qualitative is an error and weakens decisions. On the other hand, including information of questionable reliability or validity in selection models, even though it may be numeric, is dangerous. It is doubly dangerous if decision makers are comfortable dealing with the selection model but are unaware of the doubtful character of some input data. A condition a colleague has referred to as GIGO—garbage in, gospel out—may prevail.
Uncertain Information In the section on weighted scoring models, we noted some useful methods for finding the numeric weights and criteria scores when they take the form of verbal descriptors rather than numbers. These same methods are also useful when estimating the inputs for risk analysis models. Indeed, one of the first applications of the Delphi method (Dalkey, 1969) was technological forecasting—forecasting the time period in which some specific technological capability would be available. These methods are commonly used when a group must develop a consensus concerning such items as the importance of a technological change, an estimate of cash flows, a forecast of some economic variable, and similar uncertain future conditions or events. In Chapter 4 we will deal with the problem of organizing the activity of risk analysis and making such estimates as are required for dealing with uncertainty, either through simulation or
81721_Ch02.indd 71
9/16/08 11:35:58 PM
72
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
by analytic methods. Next, we exemplify the project selection process described previously by detailing an eight-step process that holds promise for improving an organization’s project management maturity and at the same time ties the projects more closely to the organization’s goals. Finally, no matter what method is used for project evaluation and selection, as time goes by the selection model’s inputs must be constantly updated. The world does not stand still— things change! What was a promising project yesterday may be a loser today—and yesterday’s loser may be today’s winner. We will have more to say on this topic in Chapter 10.
2.7
PROJECT PORTFOLIO PROCESS (PPP) Important inputs to this process are the organization’s goals and strategies, and we assume here that the organization has already identified its mission, goals, and strategies—by using some formal analytic method such as SWOT analysis (strengths, weaknesses, opportunities, threats), and that these are well known throughout the organization. If this is not the case, then any attempt to tie the organization’s projects to its goals is folly and the PPP will have little value. Deloitte Consulting (McIntyre, 2006) found that only 30 percent of surveyed organizations insisted on knowing the value a project would add to the organization’s strategy before granting approval. Symptoms of a misaligned portfolio included:
• • • • • • •
Many more projects than management expected Inconsistent determination of benefits, including double-counting Competing projects “Interesting” projects that don’t contribute to the strategy Projects whose costs exceed their benefits Projects with much higher risks than others in the portfolio Lack of tracking against the plan, at least quarterly
If the goals and strategies have been well articulated, however, then the PPP can serve many purposes:
• • • • • • • • • •
To identify proposed projects that are not really projects and should be handled through other processes To prioritize the list of available projects To intentionally limit the number of overall projects being managed so the important projects get the resources and attention they need To identify projects that best fit the organization’s goals and strategy To identify projects that support multiple organizational goals and cross-reinforce other important projects To eliminate projects that incur excessive risk and/or cost To eliminate projects that bypassed a formal selection process and may not provide benefits corresponding to their risks and/or costs To keep from overloading the organization’s resource availability To balance the resources with the needs To balance short-, medium-, and long-term returns
The PPP attempts to link the organization’s projects directly to the goals and strategy of the organization. This occurs not only in the project’s initiation and planning phases, but also
81721_Ch02.indd 72
9/16/08 11:35:58 PM
2.7
PROJECT PORTFOLIO PROCESS (PPP)
73
Project Management in Practice Using a Project Portfolio to Achieve 100% On-Time Delivery at Décor Cabinets
Décor Cabinets, a custom cabinet maker in Canada, adopted the strategic goal of 100 percent on-time delivery of their cabinets to achieve long-term customer loyalty and create added value that enhances their profitability. Having such a clear objective helped them assemble a project portfolio uniquely focused on their goal, although it also meant declining some seemingly profitable project ideas requested by customers. However, if demand increased for the
requested products, it could have had a serious negative impact on their delivery goals. It was difficult to resist pressure from different areas of the company to support these kinds of projects: “You can easily lose focus.” the CEO admitted. “Sometimes when ROI drives all decision-making you miss the bigger picture.” Source: S. F. Gale, “The Bottom Line,” PM Network, August 2007.
throughout the life cycle of the projects as they are managed and eventually brought to completion. Thus, the PPP is also a means for monitoring and controlling the organization’s strategic projects. On occasion this will mean shutting down projects prior to their completion because their risks have become excessive, their costs have escalated out of line with their expected benefits, another (or a new) project does a better job of supporting the goals, or any variety of similar reasons. It should be noted that a significant portion of the administration of this process could be managed by the Project Management Office, a concept to be discussed in Chapter 5. The steps in this process generally follow those described in Longman et al. (1999) and Englund et al. (1999).
Step 1: Establish a Project Council The main purpose of the project council is to establish and articulate a strategic direction for those projects spanning internal or external boundaries of the organization, such as cross-departmental or joint venture. Thus, senior managers must play a major role in this council. Without the
81721_Ch02.indd 73
9/16/08 11:35:58 PM
74
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
commitment of senior management, the PPP will be incapable of achieving its main objectives. The council will also be responsible for allocating funds to those projects that support the organization’s goals and controlling the allocation of resources and skills to the projects. In addition to senior management, others who should be members of the project council are:
• • • • •
the project managers of major projects; the head of the Project Management Office, if one exists; particularly relevant general managers; those who can identify key opportunities and risks facing the organization; and anyone who can derail the progress of the PPP later on in the process.
Step 2: Identify Project Categories and Criteria In this step, various project categories are identified so the mix of projects funded by the organization will be spread appropriately across those areas making major contributions to the organization’s goals. In addition, within each category, criteria are established to discriminate between very good and even better projects. The criteria are also weighted to reflect their relative importance. Identifying separate categories not only facilitates achievement of multiple organizational goals (e.g., long term, short term, internal, external, tactical, strategic) but also keeps projects from competing with each other on inappropriate categories. The first task in this step is to list the goals of each existing and proposed project: What is the mission, or purpose, of this project? Relating these to the organization’s goals and strategies should allow the council to identify a variety of categories that are important to achieving the organization’s goals. Some of these were noted above but another way to position some of the projects (particularly product/service development projects) is in terms of their extent of product and process changes. Wheelwright et al. (1992) have developed a matrix called the aggregate project plan illustrating these changes, as shown in Figure 2-10. Based on the extent of product change and process change, they identified four separate categories of projects: 1. Derivative projects. These are projects with objectives or deliverables that are only incrementally different in both product and process from existing offerings. They are often meant to replace current offerings or add an extension to current offerings (lower priced version, upscale version). 2. Platform projects. The planned outputs of these projects represent major departures from existing offerings in terms of either the product/service itself or the process used to make and deliver it, or both. As such, they become “platforms” for the next generation of organizational offerings, such as a new model of automobile or a new type of insurance plan. They thus form the basis for follow-on derivative projects that attempt to extend the platform in various dimensions. 3. Breakthrough projects. Breakthrough projects typically involve a newer technology than platform projects. It may be a “disruptive” technology that is known to the industry or something proprietary that the organization has been developing over time. Examples here include the use of fiber-optic cables for data transmission, cash-balance pension plans, and hybrid gasoline-electric automobiles. 4. R&D projects. These projects are “blue-sky,” visionary endeavors oriented toward using newly developed technologies, or existing technologies in a new manner. They may also be for acquiring new knowledge, or developing new technologies themselves.
81721_Ch02.indd 74
9/16/08 11:36:00 PM
2.7
Figure 2-10
PROJECT PORTFOLIO PROCESS (PPP)
75
An example aggregate project plan.
The size of the projects plotted on the array indicates the size/resource needs of the project and the shape may indicate another aspect of the project, e.g., internal/external, long/medium/ short term, or whatever aspect needs to be shown. The numbers indicate the order, or time frame, in which the projects are to be (or were) implemented, separated by category, if desired. The aggregate project plan can be used for many purposes:
• • • • •
To view the mix of projects within each illustrated aspect (shape) To analyze and adjust the mix of projects within each category or aspect To assess the resource demands on the organization, indicated by the size, timing, and number of projects shown To identify and adjust the gaps in the categories, aspects, sizes, and timing of the projects To identify potential career paths for developing project managers, such as team member of a derivative project, then team member of a platform project, manager of a derivative project, member of a breakthrough project, and so on
Next, the council should develop separate criteria and cost ranges for each category that determine those projects that will support the organizational strategy and goals. Example criteria might include alignment with the organization’s goals/strategy, riskiness of the project, financial return, probability of success, likelihood of achieving a breakthrough in a critical offering, appeal to a large (or new) market, impact on customer satisfaction, contribution to employee development, knowledge acquisition, and availability of staff/resources. Scales also need to be determined for each criterion to measure how different projects score on each of them. The scales on which these criteria are measured should be challenging so that the scores separate the best projects from those that are merely good. The scales should also serve as an initial screen, to start the process of winnowing out the weakest
81721_Ch02.indd 75
9/16/08 11:36:01 PM
76
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
projects. Thus, they should include limits on their extremes, such as minimum rate of return (if a financial criterion is appropriate), maximum probability of technical failure given proposed budget and schedule, or minimum acceptable potential market share. Finally, the council needs to set an importance weighting for the various criteria in each category. Note that even if the same criteria apply to multiple categories, their weights might be different. For example, if a firm needs to develop high-level, skilled project managers for their strategic projects, employee development might be more important for breakthrough projects but less important for derivative projects. Also, the weights might change depending on the life cycle stage of the project. For example, early in a project’s life, strategic considerations are often most important while in the midpoint of a project, tactical considerations might be more important. The model we have described above is a “weighted, factor scoring model,” as described earlier. As noted then, there are some standard, well-known tools to help develop the weights, scales, and criteria such as the Delphi method (Dalkey, 1969), the analytic hierarchy process (AHP), (Saaty, 1980), a simplified version of AHP by Frame (1997), and even software such as Expert Choice®. For more complex situations, with large numbers of projects and or large councils, the more sophisticated approaches are often more helpful, particularly if used with software that automatically calculates the scores and ranks the projects.
Step 3: Collect Project Data For each existing and proposed project, assemble the data appropriate to that category’s criteria. Be sure to update the data for ongoing projects and not just use the data from the previous evaluation. For cost data, use “activity based costs” (see Section 7.1) rather than incremental costs. Challenge and try to verify all data; get other people involved in validating the data, perhaps even customers (e.g., market benefit). Include the timing, both date and duration, for expected benefits and resource needs. Use the project plan, a schedule of project activities, past experience, expert opinion, whatever is available to get a good estimate of the data. Then document any assumptions made so that they can be checked in the future as the project progresses. If the project is new, you may want to fund only enough work on the project to verify the assumptions or determine the window-of-opportunity for the proposed product or process, holding off full funding until later. Similarly, identify any projects that can be deferred to a later time period, those that must precede or follow other projects, those that support other projects or should be done in conjunction with them, those that can be outsourced, and other such special aspects of the projects. Next, use the criteria score limits to screen out the weaker projects: Have costs on existing projects escalated beyond the project’s expected benefits? Has the benefit of a project lessened because the organization’s goals have changed? Does a competitor’s new entry obviate the advantages of a project? Does a new (or old) project dominate an existing or proposed project in terms of its benefits, furtherance of organizational goals, reduced costs? Also, screen in any projects that do not require deliberation, such as projects mandated by regulations or laws, projects that are operating or competitive necessities, projects required for environmental or personnel reasons, and so on. The fewer projects that need to be compared and analyzed, the easier the work of the council.
Step 4: Assess Resource Availability Next, assess the availability of both internal and external resources, by type, department, and timing. Note that labor availability should be estimated conservatively, leaving time for vacations, personal needs, illness, holidays, and most important, regular functional (nonproject) work. After allowing for all of these things that limit labor availability, add a bit more, perhaps
81721_Ch02.indd 76
9/16/08 11:36:01 PM
2.7
PROJECT PORTFOLIO PROCESS (PPP)
77
10 percent, to allow for the well-known fact that human beings need occasional short breaks to rest or meet other human needs. Timing is particularly important, since project resource needs by type typically vary up to 100 percent over the life cycle of projects. Needing a normally plentiful resource at the same moment it is fully utilized elsewhere may doom an otherwise promising project. Eventually, the council will be trying to balance aggregate project resource needs over future periods with resource availabilities so timing is as important as the amount of maximum demand and availability. This is the major subject of Chapter 9.
Step 5: Reduce the Project and Criteria Set In this step, multiple screens are employed to try to narrow down the number of competing projects. As noted earlier, the first screen is each project’s support of the organization’s goals. Other possible screens might be criteria such as:
• • • • • • • • • • •
Whether the required competence exists in the organization Whether there is a market for the offering How profitable the offering is likely to be How risky the project is If there is a potential partner to help with the project If the right resources are available at the right times If the project is a good technological/knowledge fit with the organization If the project uses the organization’s strengths, or depends on its weaknesses If the project is synergistic with other important projects If the project is dominated by another existing or proposed project If the project has slipped in its desirability since the last evaluation
One way to evaluate the dominance of some projects over others, and at the same time eliminate nondifferentiating criteria, is by comparing the coefficients of variation of each of the criteria across the projects. This technique allows an analyst to maximize the variation within the project set across relevant criteria, eliminating similar projects that are dominated, and identifying criteria that, at least in this evaluation round, do not differentiate among the projects. See Raz (1997) for an example of this approach. The result of this step may involve canceling some ongoing projects or replacing them with new, more promising projects. Beware, however, of the tendency to look more favorably upon new, untested concepts than on current projects experiencing the natural problems and hurdles of any promising project.
Step 6: Prioritize the Projects within Categories Apply the scores and criterion weights to rank the projects within each category. It is acceptable to hold some hard-to-measure criteria out for subjective evaluation, such as riskiness, or development of new knowledge. Subjective evaluations can be translated from verbal to numeric terms easily by the Delphi or other methods and used in the weighted factor scoring model. It should be remembered that such criteria as riskiness are usually composite measures of a set of “risks” in different areas. The same is true of criteria like “development of new knowledge.” When checking the results of this step, however, reconsider the projects in terms of their benefits first and their resource costs second. The former are commonly more difficult to assess and a reconsideration based on more familiarity with the project profiling process and
81721_Ch02.indd 77
9/16/08 11:36:01 PM
78
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
other project evaluations may suggest interchanging the priority of neighboring projects. This could be especially critical around the project cutoff point. Because the projects competing around the cutoff point are typically quite close in benefit/cost scores, there are usually no serious consequences resulting from “errors.” This is, however, an excellent problem on which to use sensitivity analysis. It is also possible at this time for the council to summarize the “returns” from the projects to the organization. However, this should be done by category, not for each project individually since different projects are offering different packages of benefits that are not comparable. For example, R & D projects will not have the expected monetary return of derivative projects; yet it would be foolish to eliminate them simply because they do not measure up on this (irrelevant, for this category) criterion.
Step 7: Select the Projects to Be Funded and Held in Reserve The first task in this step is an important one: determining the mix of projects across the various categories (and aspects, if used) and time periods. Next, be sure to leave some percent (often 10–15 percent) of the organization’s resource capacity free for new opportunities, crises in existing projects, errors in estimates, and so on. Then allocate the categorized projects in rank order to the categories according to the mix desired. It is usually a good practice to include some speculative projects in each category to allow future options, knowledge improvement, additional experience in new areas, and such. Overall, the focus should be on committing to fewer projects but with sufficient funding to allow project completion. Document why late projects were delayed and why some, if any, were defunded. One special type of delayed project mentioned earlier is sometimes called an “out-plan” project (in contrast to the selected “in-plan” projects) (Englund et al, 1999). Outplan projects are those that appear promising but are awaiting further investigation before a final decision is made about their funding, which could occur in the next PPP cycle or sooner, if they warrant the use of some of the 10–15 percent funding holdout. The result of this step (and most of the project portfolio process) is illustrated in the Plan of Record shown in Figure 2-11. Here, the mix across categories is listed, the priorities and resource needs of each project are given, the timing (schedule) of each project over the PPP cycle (6 months assumed here) is shown (to match resource availability), the out-plan projects, if any, are shown, and the total resource needs and availabilities are listed.
Step 8: Implement the Process The first task in this final step is to make the results of the PPP widely known, including the documented reasons for project cancellations, deferrals, and non-selection as was mentioned earlier. Top management must now make their commitment to this project portfolio process totally clear by supporting the process and the results. This may require a PPP champion near the top of the organization. As project proposers come to understand the workings and importance of the PPP, their proposals will more closely fit the profile of the kinds of projects the organization wishes to fund. As this happens, it is important to note that the council will have to concern itself with the reliability and accuracy of proposals competing for limited funds. Senior management must fully fund the selected projects. It is neither appropriate nor ethical for senior management to undermine PPP and the council as well as strategically important projects by playing a game of arbitrarily cutting X percent from project budgets. The council needs to be wary of interpersonal or interdepartmental competition entering the scene at this point also. In some organizations, individuals with their own particular agenda will
81721_Ch02.indd 78
9/16/08 11:36:02 PM
2.7
Figure 2-11
PROJECT PORTFOLIO PROCESS (PPP)
79
Plan of Record.
ignore committees and processes (they may be heard to argue that committees never affect anything anyway) until implementation time rolls around, and then they attempt to exercise their political power to undermine the results of others’ long labors. If this does occur, it is indicative of serious organizational problems and the PPP process will fail until the problems are corrected. Of course, the process will need to be repeated on a regular basis. The council should determine how often this should be, and to some extent it depends on the speed of change in the industry the organization is in. For some industries, quarterly analysis may be best while in slow-moving industries, yearly may be fine. Finally, the process should be flexible and improved continuously. Instinct may suggest ways that the process may be altered to better match the competitive environment, or to reflect more closely the organization’s goals. The process should be changed when it is found appropriate to do so, including categories, criteria, steps, the order of tasks, and so on. We offer a final note on this subject of creating and managing a portfolio of projects. In the preceding description of portfolio building it was tacitly assumed that the projects were
81721_Ch02.indd 79
9/16/08 11:36:02 PM
80
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
independent and could be dealt with individually. At times, the projects in a portfolio are not independent. Dickinson et al. (2001) describe a model developed for the Boeing Company that optimizes a portfolio of interdependent product improvement projects. The model includes risk as well as cost/benefit analysis.
2.8
PROJECT PROPOSALS
PMBOK Guide
The topic of proposals and bidding on proposals is highly relevant to the PMBOK knowledge area (9) of Procurement. Further discussion of procurement is included in Sections 5.2 and 6.5. Now that project selection methods have been discussed, it is appropriate to consider what documentation is needed to evaluate a project that is being considered. The set of documents submitted for evaluation is called the project proposal, whether it is brief (a page or two) or extensive, and regardless of the formality with which it is presented. Several issues face firms preparing proposals, particularly firms in the aerospace, construction, defense, and consulting industries. These are: 1. 2. 3. 4.
Which projects should be bid on? How should the proposal-preparation process be organized and staffed? How much should be spent on preparing proposals for bids? How should the bid prices be set? What is the bidding strategy? Is it ethical?
Generally, these decisions are made on the basis of their overall expected values, perhaps as reflected in a scoring model. In-house proposals submitted by a firm’s personnel to that firm’s top management do not usually require the extensive treatment given to proposals submitted to outside clients or agencies such as the Department of Defense. For the Department of Defense, a proposal must be precisely structured to meet the requirements contained in the official Request for Proposal (RFP) or Request for Quotation (RFQ)—more specifically, in the Technical Proposal Requirements (TPR) that is part of the RFP or RFQ. The construction and preparation of a proposal to be submitted to the government or other outside funder is beyond the scope of this book. Fortunately, the subject has been well treated by Knutson (1996a, 1996b, and 1996c) in a three-part paper that begins with a discussion of the decision whether or not to seek some particular business. The series then covers the composition of a team to write the proposal and Knutson’s view of how to structure, price, and submit the proposal. It should be noted that customs, practices, rules, and laws concerning proposals vary from nation to nation (e.g., see Jergeas et al., 1997). All proposals should begin with a short summary statement (an “Executive Summary”) covering the fundamental nature of the proposal in minimally technical language, as well as the general benefits that are expected. All proposals should be accompanied by a “cover letter.” Roman (1986, pp. 67–68) emphasizes that the cover letter is a key marketing document and is worthy of careful attention. In addition to the Executive Summary and the cover letter, every proposal should deal with four distinct issues: (1) the nature of the technical problem and how it is to be approached; (2) the plan for implementing the project once it has been accepted; (3) the plan for logistic support and administration of the project; and (4) a description of the group proposing to do the work, plus its past experience in similar work. The precise way in which the contents of a proposal are organized usually follows the directions found in the TPR or RFP, the stated requirements of a specific potential funder, the traditional form used by the organization issuing the proposal, or, occasionally, the whim of the writer. As is the case with most products, the highest probability of acceptance will occur
81721_Ch02.indd 80
9/16/08 11:36:02 PM
2.8
PROJECT PROPOSALS
81
when the proposal meets the expectations of the “buyer,” as to form and content. At times there is a tendency to feel that “nontechnical” projects (which usually means projects not concerned with the physical sciences or a physical product) are somehow exempt from the need to describe how the problem will be approached and how the project will be implemented— including details such as milestones, schedules, and budgets. To deal with nontechnical projects casually is folly and casts considerable doubt on the proposer’s ability to deliver on promises. (It is all too common for projects concerned with the development of art, music, drama, and computer software, among other “nontechnical” areas, to be quite vague as to deliverables, deadlines, and costs.) On the other hand, when the proposal is aimed at another division or department of the same parent organization, the technical requirements of the proposal may be greatly relaxed, but the technical approach and implementation plan are still required—even if their form is quite informal.
The Technical Approach The proposal begins with a general description of the problem to be addressed or project to be undertaken. If the problem is complex, the major subsystems of the problem or project are noted, together with the organization’s approach to each. The presentation is in sufficient detail that a knowledgeable reader can understand what the proposer intends to do. The general method of resolving critical problems is outlined. If there are several subsystems, the proposed methods for interfacing them are covered. In addition, any special client requirements are listed along with proposed ways of meeting them. All test and inspection procedures to assure performance, quality, reliability, and compliance with specifications are noted.
The Implementation Plan The implementation plan for the project contains estimates of the time required, the cost, and the materials used. Each major subsystem of the project is listed along with estimates of its cost. These costs are aggregated for the whole project, and totals are shown for each cost category. Hours of work and quantities of material used are shown (along with the wage rates and unit material costs). A list of all equipment costs is added, as is a list of all overhead and administrative costs. Depending on the wishes of the parent organization and the needs of the project, project task schedules (e.g., time charts, network diagrams, Gantt charts) are given for each subsystem and for the system as a whole. (See Chapter 8 for more about time charts, network diagrams, and Gantt charts.) Personnel, equipment, and resource usages are estimated on a period-by-period basis in order to ensure that resource constraints are not violated. Major milestones are indicated on the time charts. Contingency plans are specifically noted. For any facility that might be critical, load charts are prepared to make sure that the facility will be available when needed.
The Plan for Logistic Support and Administration The proposal includes a description of the ability of the proposer to supply the routine facilities, equipment, and skills needed during any project. Having the means to furnish artist’s renderings, special signs, meeting rooms, stenographic assistance, reproduction of oversized documents, computer graphics, word processing, video teleconferencing, and many other occasionally required capabilities provides a “touch of class.” Indeed, their unavailability can be irritating. Attention to detail in all aspects of project planning increases the probability of success for the project—and impresses the potential funder.
81721_Ch02.indd 81
9/16/08 11:36:03 PM
82
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
It is important that the proposal contain a section explaining how the project will be administered. Of particular interest will be an explanation of how control over subcontractors will be administered, including an explanation of how proper subcontractor performance is to be insured and evaluated. The nature and timing of all progress reports, budgetary reports, audits, and evaluations are covered, together with a description of the final documentation to be prepared for users of the proposed deliverables. Termination procedures are described, clearly indicating the disposition of project personnel, materials, and equipment at project end. A critical issue, often overlooked, that should be addressed in the administrative section of the proposal is a reasonably detailed description of how change orders will be handled and how their costs will be estimated. Change orders are a significant source of friction (and lawsuits) between the organization doing the project and the client. The client rarely understands the chaos that can be created in a project by the introduction of a seemingly simple change. To make matters worse, the group proposing the project seems to have a penchant for misleading the potential client about the ease with which “minor” changes can be adopted during the process of implementing the project. Control of change orders is covered in Chapter 11.
Past Experience All proposals are strengthened by including a section that describes the past experience of the proposing group. It contains a list of key project personnel together with their titles and qualifications. For outside clients, a full résumé for each principal should be attached to the proposal. When preparing this and the other sections of a proposal, the proposing group should remember that the basic purpose of the document is to convince a potential funder that the group and the project are worthy of support. The proposal should be written accordingly.
SUMMARY This chapter initiated our discussion of the project management process by describing procedures for strategically evaluating and selecting projects. We first described the strategic objective of using projects to help achieve the organization’s goals and strategy, and a project portfolio process to help achieve this. We then outlined some criteria for project selection models and then discussed the general nature of these models. The chapter then described the types of models in use and their advantages and disadvantages. Considering the degree of uncertainty associated with many projects, a section was devoted to evaluating the impact of risk and uncertainty. Concluding the discussion, some general comments were made about data requirements and the use of these models. The final section discussed the documentation of the evaluation/selection process via project proposals. The following specific points were made in this chapter:
•
The role of projects in achieving the organization’s goals and strategy is critical.
•
The eight-step project portfolio process is an effective way to select and manage projects that are tied to the organization’s goals.
81721_Ch02.indd 82
•
Primary model selection criteria are realism, capability, flexibility, ease of use, and cost.
•
Preparatory steps in using a model include: (1) identifying the firm’s objectives; (2) weighting them relative to each other; and (3) determining the probable impacts of the project on the firm’s competitive abilities.
•
Project selection models can generally be classified as either numeric or nonnumeric; numeric models are further subdivided into profitability and scoring categories.
•
Nonnumeric models include: (1) the sacred cow; (2) the operating necessity; (3) the competitive necessity; and (4) comparative benefit.
•
Profitability models include standard forms such as: (1) payback period; (2) average rate of return; (3) discounted cash flow; (4) internal rate of return; and (5) profitability index.
•
Project management maturity measurement is a way of assessing an organization’s ability to conduct projects successfully.
9/16/08 11:36:03 PM
QUESTIONS
•
• •
Scoring models—the authors’ preference—include: (1) the unweighted 0–1 factor model; (2) the unweighted factor scoring model; (3) the weighted factor scoring model; and (4) the constrained weighted factor scoring model. For handling uncertainty: (1) pro forma documents; (2) risk analysis; (3) and simulation with sensitivity analysis are all helpful. Special care should be taken with the data used in project selection models. Of concern are data taken from an accounting data base, how data are mea-
83
sured and conceived, and the effect of technological shock.
•
Project proposals generally consist of a number of sections: (1) the technical approach; (2) the implementation plan; (3) the plan for logistic support and administration; and (4) past experience.
In the next chapter we consider the selection of the appropriate manager for a project and what characteristics are most helpful for such a position. We also address the issue of the project manager’s special role, and the demands and responsibilities of this critical position.
GLOSSARY Decision Support System A computer package and data base to aid managers in making decisions. It may include simulation programs, mathematical programming routines, and decision rules. Delphi A formalized method of group decision making that facilitates drawing on the knowledge of experts in the group. Deterministic Predetermined, with no possibility of an alternate outcome. Compare with stochastic. Expert System A computer package that captures the knowledge of recognized experts in an area and can make inferences about a problem based on decision rules and data input to the package. Maturity The sophistication and experience of an organization in managing multiple projects. Model A way of looking at reality, usually for the purpose of abstracting and simplifying it, to make it understandable in a particular context. Network A group of items connected by some common mechanism. Portfolio A group or set of projects with varying characteristics.
Pro forma Projected or anticipated, usually applied to financial data such as balance sheets and income statements. Programming An algorithmic methodology for solving a particular type of complex problem, usually conducted on a computer. Project portfolio process An eight-step procedure for selecting, implementing, and reviewing projects that will help an organization achieve its strategic goals. Risk analysis A procedure that uses a distribution of input factors and probabilities and returns a range of outcomes and their probabilities. Sensitivity analysis Investigation of the effect on the outcome of changing some parameters or data in the procedure or model. Simulation A technique for emulating a process, usually conducted a considerable number of times to understand the process better and measure its outcomes under different policies. Stochastic Probabilistic, or not deterministic.
QUESTIONS Material Review Questions
1. What are the four parts of a technical proposal? 2. By what criteria do you think managers judge selection models? What criteria should they use? 3. Contrast the competitive necessity model with the operating necessity model. What are the advantages and disadvantages of each? 4. What is a sacred cow? Give some examples. 5. Give an example of a Q-Sort process for project selection.
81721_Ch02.indd 83
6. What are some of the limitations of project selection models? 7. What is the distinction between a qualitative and a quantitative measure? 8. How does the discounted cash flow method answer some of the criticisms of the payback period and average rate of return methods? 9. What are some advantages and disadvantages of the profit/profitability numeric models?
9/16/08 11:36:03 PM
84
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
10. How is sensitivity analysis used in project selection? 11. Contrast risk with uncertainty. Describe the windowof-opportunity approach. 12. Describe the eight-step project portfolio process.
13. What does the term “maturity” mean? 14. How does a risk analysis operate? How does a manager interpret the results?
Class Discussion Questions
15. Which of the many purposes of the project portfolio process are most important to a firm with a low project management maturity? Which to a firm with high maturity? 16. On what basis does the real options model select projects? 17. What is the real difference between profitability and scoring models? Describe a model that could fit both categories. 18. Can risk analysis be used for nonproject business decision making? Explain how. 19. Discuss how the following project selection models are used in real-world applications. (a) Capital investment with discounted cash flow. (b) Simulation models. 20. Why do you think managers underutilize project selection models? 21. Would uncertainty models be classified as profitability models, scoring models, or some other type of model? 22. Contrast validity with reliability. What aspects, if any, are the same? 23. Contrast subjective and objective measures. Give examples of the proper use of each type of measure when evaluating competing projects.
24. Can a measure be reliable, yet invalid? Explain. 25. Is project management maturity focused on doing better on multiple projects or single projects? 26. Are there certain types of projects that are better suited for nonnumeric selection methods as opposed to numeric ones? 27. Identify some of the ethical issues that can arise in a bid response to an RFP. 28. Interpret the columns of data in Table 2-4. Does the $10,968 value mean that the project is expected to return only this amount of discounted money? 29. How would you find the probability in Figure 2-9 of an NPV of over $20,000? 30. Reconsider Table 2-3 to explain why the simulated outcome in Table 2-4 is only about half as much as the value originally obtained in Table 2-2. Does the spread of the data in Table 2-3 appear realistic? 31. What important comparisons does the aggregate project plan in Figure 2-10 allow? 32. What does the plan of record illustrate that the aggregate project plan does not?
Questions for Project Management in Practice Implementing Strategy through Projects at Blue Cross/Blue Shield
Using a Project Portfolio to Achieve 100% On-Time Delivery at Décor Cabinets
33. Is the new project management approach to implementing strategy bottom-up or top-down? 34. What is the role of projects and their management in this new process? That is, wouldn’t a functional approach have worked just as well? 35. What other benefits might you expect from a system such as this?
40. Might it not make sense to include a least a few of the more promising new product projects in their portfolio? 41. If ROI isn’t the big picture, what do you think is?
Project Selection for Spent Nuclear Fuel Cleanup
Simulating the Failure of California’s Levees
42. What would be involved in changing the simulation threat from hurricanes to earthquakes? 43. What process do you think would be used to analyze the simulation results?
36. Why did it take five months to explain the problem to the stakeholders? 37. Why do you think the stakeholders no longer trusted the authorities? 38. What might have been the problems with options 1, 2, and 4? 39. How is option 3 a solution?
81721_Ch02.indd 84
9/16/08 11:36:04 PM
PROBLEMS
85
PROBLEMS 1. Two new Internet site projects are proposed to a young start-up company. Project A will cost $250,000 to implement and is expected to have annual net cash flows of $75,000. Project B will cost $150,000 to implement and should generate annual net cash flows of $52,000. The company is very concerned about their cash flow. Using the payback period, which project is better, from a cash flow standpoint? 2. Sean, a new graduate at a telecommunications firm, faces the following problem his first day at the firm: What is the average rate of return for a project that costs $200,000 to implement and has an average annual profit of $30,000? 3. A four-year financial project has net cash flows of $20,000; $25,000; $30,000; and $50,000 in the next four years. It will cost $75,000 to implement the project. If the required rate of return is 0.2, conduct a discounted cash flow calculation to determine the NPV. 4. What would happen to the NPV of the above project if the inflation rate was expected to be 4 percent in each of the next four years? 5. Calculate the profitability index for Problem 3. For Problem 4. 6. A four-year financial project has estimates of net cash flows shown in the following table: Year 1 2 3 4
Pessimistic $14,000 19,000 27,000 32,000
Most Likely $20,000 25,000 30,000 35,000
Optimistic $22,000 30,000 36,000 39,000
It will cost $65,000 to implement the project, all of which must be invested at the beginning of the project. After the fourth year, the project will have no residual value. Using the most likely estimates of cash flows, conduct a discounted cash flow calculation assuming a 20 percent hurdle rate with no inflation. (You may use either Excel® or a paper-and-pencil calculation.) What is the discounted profitability index of the project? 7. Given the table in Problem 6, assume that the cash flow estimates for each year are best represented by a triangular distribution and that the hurdle rate is 20 percent. (a) Use Crystal Ball® to find the expected NPV of the project. (b) What is the probability that the project will yield a return greater than the 20 percent hurdle rate?
81721_Ch02.indd 85
8. If an inflation rate of 2 percent, normally distributed with a standard deviation of .333 percent, is assumed, what is the expected NPV of the project in Problem 7, and what is the probability that it will qualify? 9. Use a weighted score model to choose between three methods (A, B, C) of financing the acquisition of a major competitor. The relative weights for each criterion are shown in the following table as are the scores for each location on each criterion. A score of 1 represents unfavorable, 2 satisfactory, and 3 favorable. Method Category Consulting costs Acquisition time Disruption Cultural differences Skill redundancies Implementation risks Infrastructure
Weight
A
B
C
20 20 10 10 10 25 10
1 2 2 3 2 1 2
2 3 1 3 1 2 2
3 1 3 2 1 3 2
10. Develop a spreadsheet for Problem 9. (a) What would your recommendation be if the weight for the implementation risks went down to 10 and the weight of cultural differences went up to 25? (b) Suppose instead that method A received a score of 3 for implementation risks. Would your recommendation change under these circumstances? (c) The vice president of finance has looked at your original scoring model and feels that tax considerations should be included in the model with a weight of 15. In addition, the VP has scored the methods on tax considerations as follows: method A received a score of 3, method B received a score of 2, and method C received a score of 1. How would this additional information affect your recommendation? 11. Nina is trying to decide in which of four shopping centers to locate her new boutique. Some locations attract a higher class of clientele than others, some are in an indoor mall, some have a much greater customer traffic volume than others, and, of course, rent varies considerably from one location to another. Because of the nature of her store, she has decided that the class of clientele is the most important consideration, the higher the better. Following this, however, she must pay attention to her expenses and rent is a major item, probably 90 percent as important as clientele. An indoor, temperature-controlled mall is a big help, however, for
9/16/08 11:36:04 PM
86
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
stores such as hers where 70 percent of sales are from passersby slowly strolling and window shopping. Thus, she rates this as about 95 percent as important as rent. Last, a higher traffic volume of shoppers means more potential sales; she thus rates this factor as 80 percent as important as rent. As an aid in visualizing her location alternatives, she has constructed the following table. A “good” is scored as 3, “fair” as 2, and “poor” as 1. Use a weighted score model to help Nina come to a decision. Location Class of clientele Rent Indoor mall Traffic volume
1
2
3
4
Fair Good Good Good
Good Fair Poor Fair
Poor Poor Good Good
Good Good Poor Poor
12. Referring to Problem 11, develop a spreadsheet to help Nina select a location for her boutique. Suppose Nina is able to negotiate a lower rent at location 3 and thus raise
its ranking to “good.” How does this affect the overall rankings of the four locations? 13. A dot-com startup has decided to upgrade its server computers. It is also contemplating a shift from its Unix-based platform to a Windows-based platform. Three major cost items will be affected whichever platform they choose: hardware costs, software conversion costs, and employee training costs. The firm’s technical group has studied the matter and has made the following estimates for the cost changes in $000s. Using Crystal Ball® and assuming that the costs may all be represented by triangular distributions, simulate the problem 1000 times. Given the information resulting from the simulation, discuss the decision problem. Windows
Unix
Low Likeliest High Low Likeliest High Hardware 100 Software 275 Training 9
125 300 10
200 500 15
80 250 8
110 300 10
210 525 17.5
INCIDENTS FOR DISCUSSION Portillo, Inc.
L & M Power
Portillo, Inc. is a manufacturer of small household appliances and cooking utensils. Working with Johanna Portillo, the CEO of the firm, her executive team has developed a scoring model to analyze and select new items to be added to the product line. The model is also used to select old items to be dropped from the line. It employs both objective and subjective estimates of scores for the financial and nonfinancial elements that make up the model. The model is used by a Drop/Add Committee she appointed. Ms. Portillo is pleased with the construct of the model and feels that it includes all of the factors relevant to the drop/add decision. She is also comfortable with the factor weights developed by her executives. Following a review of the past year’s meetings of the Drop/Add Committee, Ms. Portillo discovered that several managers made significant errors when estimating costs and benefits of many projects. After a careful study of the estimates, she noticed that the sponsors of a product seemed to overestimate its benefits and underestimate its costs. It also appeared that other managers might be underestimating benefits and overestimating costs. She was not sure about her suspicions and wondered how to find out if her notions were correct. Even if they were correct, she wondered what to do about it.
In the next two years, a large municipal gas company must begin constructing new gas storage facilities to accommodate the Federal Energy Regulatory Commission’s Order 636 deregulating the gas industry. The vice-president in charge of the new project believes there are two options. One option is an underground deep storage facility (UDSF) and the other is a liquified natural gas facility (LNGF). The vice-president has developed a project selection model and will use it in presenting the project to the president. For the models she has gathered the following information:
Questions: How can Ms. Portillo find out if her suspicions are correct? What are her options if her idea is supported?
81721_Ch02.indd 86
Initial Cost
Operating Cost / Cu. Ft.
Expected Life
Salvage Value
UDSF
$10,000,000
$0.004
20 years
10%
LNGF
25,000,000
0.002
15
5
Since the vice-president’s background is in finance, she believes the best model to use is a financial one, net present value analysis. Questions: Would you use this model? Why or why not? Base your answer on the five criteria developed by Souder and evaluate this model in terms of the criteria.
9/16/08 11:36:04 PM
BIBLIOGRAPHY
87
CONTINUING INTEGRATIVE CLASS PROJECT The task for the class here is to select an appropriate project for the course. Consideration should be given to the fixed end-of-term deadline, the limited monetary but large personnel resources available, the irrelevance of financial returns, and the availability of contacts and good project possibilities outside the classroom. As indicated in Chapter 1, there are often many excellent projects on a college campus, such as in the residence halls, the library, the caf-
eteria, the medical care office, and so on. When evaluating these situations for potential projects, consider factors such as whether the class has a good inside contact to sponsor the project, whether data will be easily accessible for the class, how many students the organization or department can handle at a time, how extensive the project is, how clear the problem/opportunity is, when they will need an answer, and other such important issues.
BIBLIOGRAPHY Åstebro, T. “Key Success Factors for Technological Entrepreneurs’ R & D Projects.” IEEE Transactions on Engineering Management, August 2004. Baker, B. “The Fall of the Firefly: An Assessment of a Failed Project Strategy.” Project Management Journal, September 2002. Baker, B., and R. Menon. “Politics and Project Performance: The Fourth Dimension of Project Management.” PM Network, November 1995. Booz, Allan, and Hamilton, Inc. Management of New Products. New York: Booz, Allan, and Hamilton, Inc., 1966. Cleland, D. I., and W. R. King. Project Management Handbook. New York: Van Nostrand-Reinhold, 1983. Dalkey, N. C. The Delphi Method: An Experimental Study of Group Opinion (RM-5888-PR). Santa Monica, CA: The Rand Corporation, June 1969. Dickinson, M. W., A. C. Thornton, and S. Graves. “Technology Portfolio Management: Optimizing Interdependent Projects over Multiple Time Periods.” IEEE Transactions on Engineering Management, November 2001. Doctor, R. N., D. P. Newton, and A. Pearson. “Managing Uncertainty in Research and Development.” Technovation, February 2001. Englund, R. L., and R. J. Graham. “From Experience: Linking Projects to Strategy.” Journal of Product Innovation Management, Vol. 16, No. 1, 1999. Evans, J. R., and S. J. Mantel, Jr. “A New Approach to the Evaluation of Process Innovations.” Technovation, October 1985. Evans, J. R., and D. L. Olson. Introduction to Simulation and Risk Analysis. Upper Saddle River, NJ: Prentice-Hall, 1998. Frame, J. D. The New Project Management: Tools for an Age of Rapid Change, Corporate Reengineering, and Other Business Realities. San Francisco: Jossey-Bass, 1997. Gale, S. F. “The Bottom Line,” PM Network, August 2007.
81721_Ch02.indd 87
Githens, G. “Financial Models, Right Questions, Good Decision.” PM Network, July 1998. Hayes, R., and W. J. Abernathy. “Managing Our Way to Economic Decline.” Harvard Business Review, July–August 1980. Helin, A. F., and W. E. Souder. “Experimental Test of a Q-Sort Procedure for Prioritizing R & D Projects.” IEEE Transactions on Engineering Management, November 1974. Huber, G. P. “The Nature of Organizational Decision Making and the Design of Decision Support Systems,” MIS Quarterly, June 1981. Ibbs, C. W., and Y. H. Kwak. “Assessing Project Management Maturity.” Project Management Journal, March 2000. Irving, R. H., and D. W. Conrath. “The Social Context of Multiperson, Multiattribute Decision-making.” IEEE Transactions on Systems, Man, and Cybernetics, May–June 1988. Jacob, W. F., and Y. H. Kwak. “In Search of Innovative Techniques to Evaluate Pharmaceutical R & D Projects.” Technovation, April 2003. Jergeas, G. F., and V. G. Cooke. “Law of Tender Applied to Request for Proposal Process.” Project Management Journal, December 1997. Jolly, D. “The Issue of Weightings in Technology Portfolio Management.” Technovation, May 2003. Knutson, J. “Proposal Management: Analyzing Business Opportunities.” PM Network, January 1996a. Knutson, J. “Proposal Management: Generating Winning Proposals, Part 1.” PM Network, February 1996b. Knutson, J. “Proposal Management: Generating Winning Proposals, Part 2.” PM Network, March 1996c. Liberatore, M. J., and G. J. Titus. “The Practice of Management Science in R & D Project Management.” Management Science, August 1983. Longman, A., D. Sandahl, and W. Speir. “Preventing Project Proliferation.” PM Network, July 1999.
9/16/08 11:36:05 PM
88
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Lubianiker, S. “Opening the Book on the Open Maturity Model.” PM Network, March 2000. Luehrman, T. A. “Investment Opportunities as Real Options: Getting Started on the Numbers.” Harvard Business Review, July–August 1998a. Luehrman, T. A. “Strategy as a Portfolio of Real Options.” Harvard Business Review, September–October 1998b. Mantel, S. J., Jr., J. R. Evans, and V. A. Tipnis. “Decision Analysis for New Process Technology,” in B. V. Dean, ed., Project Management: Methods and Studies. Amsterdam: North-Holland, 1985. Matzler, K., and H. H. Hinterhuber. “How to Make Product Development Projects More Successful by Integrating kano’s Model of Customer Satisfaction into Quality Function Deployment.” Technovation, January 1998. McIntyre, J. “The Right Fit,” PM Network, November. 2006. Meade, L. M., and A. Presley. “R & D Project Selection Using the Analytic Network Process.” IEEE Transactions on Engineering Management, February 2002. Meredith, J. “The Implementation of Computer Based Systems.” Journal of Operations Management, October 1981. Pennypacker, J. S., and K. P. Grant. “Project Management Maturity: An Industry Benchmark.” Project Management Journal, March 2003. Project Management Institute. A Guide to the Project Management Body of Knowledge, 3rd ed. Newtown Square, PA: Project Management Institute, 2004.
Remy, R. “Adding Focus to Improvement Efforts with PM3.” PM Network, July 1997. Roman, D. D. Managing Projects: A Systems Approach. New York: Elsevier, 1986. Ross, S. A., R. W. Westerfield, and B. D. Jordan. Fundamentals of Corporate Finance, 8th ed. New York: Irwin/ McGraw-Hill, 2008. Saaty, T. S. Decision for Leaders: The Analytic Hierarchy Process. Pittsburgh: University of Pittsburgh, 1990. Simon, H. The New Science of Management Decisions, rev. ed. Englewood Cliffs, NJ: Prentice Hall, 1977. Souder, W. E. “Utility and Perceived Acceptability of R & D Project Selection Models.” Management Science, August 1973. Souder, W. E. “Project Evaluation and Selection,” in D. I. Cleland and W. R. King, eds., Project Management Handbook. New York: Van Nostrand Reinhold, 1983. Thomas, J., C. L. Delisle, K. Jugdev, and P. Buckle. “Mission Possible: Selling Project Management to Senior Executives.” PM Network, January 2001. Turban, E., and J. R. Meredith. Fundamentals of Management Science, 6th ed. Homewood, IL: Irwin, 1994. van Gigch, J. P. Applied General Systems Theory, 2nd ed. New York: Harper & Row, 1978. Wheelwright, S. C., and K. B. Clark. “Creating Project Plans to Focus Product Development.” Harvard Business Review, March–April 1992.
The following case concerns a European firm trying to choose between almost a dozen capital investment projects being championed by different executives in the firm. However, there are many more projects available for funding than there are funds available to implement them, so the set must be narrowed down to the most valuable and important to the firm. Financial, strategic, and other data are given concerning the projects in order to facilitate the analysis needed to make a final investment recommendation to the Board of Directors.
C
A
S
E
PAN-EUROPA FOODS S.A.* C. Opitz and R. F. Bruner
In early January 1993, the senior-management committee of Pan-Europa Foods was to meet to draw up the firm’s capital budget for the new year. Up for consider*Copyright © 1993 by the Darden Graduate Business School Foundation, Charlottesville, Virginia. Reprinted from Journal of Product Innovation Management, Vol. 16, No. 1, pp. 58–69, 1999.
81721_Ch02.indd 88
ation were 11 major projects that totaled over :208 million (euros). Unfortunately, the board of directors had imposed a spending limit of only :80 million; even so, investment at that rate would represent a major increase in the firm’s asset base of :656 million. Thus the challenge for the senior managers of Pan-Europa was to allocate funds among a range of compelling projects: new-product introduction, acquisition, market expansion,
9/16/08 11:36:05 PM
CASE
efficiency improvements, preventive safety, and pollution control.
maintenance,
The Company Pan-Europa Foods, headquartered in Brussels, Belgium, was a multinational producer of high-quality ice cream, yogurt, bottled water, and fruit juices. Its products were sold throughout Scandinavia, Britain, Belgium, the Netherlands, Luxembourg, western Germany, and northern France. (See Exhibit 1 for a map of the company’s marketing region.) The company was founded in 1924 by Theo Verdin, a Belgian farmer, as an offshoot of his dairy business. Through keen attention to product development, and shrewd marketing, the business grew steadily over the years. The company went public in 1979 and by 1993
89
was listed for trading on the London, Frankfurt, and Brussels exchanges. In 1992, Pan-Europa had sales of almost :1.1 billion. Ice cream accounted for 60 percent of the company’s revenues; yogurt, which was introduced in 1982, contributed about 20 percent. The remaining 20 percent of sales was divided equally between bottled water and fruit juices. Pan-Europa’s flagship brand name was “Rolly,” which was represented by a fat, dancing bear in farmers’ clothing. Ice cream, the company’s leading product, had a loyal base of customers who sought out its high butterfat content, large chunks of chocolate, fruit, nuts, and wide range of original flavors. Pan-Europa sales had been static since 1990 (see Exhibit 2), which management attributed to low population growth in northern Europe and market saturation in some areas. Outside observers, however, faulted recent
EXHIBIT 1 Pan-Europa Foods S. A. Nations Where Pan-Europa Competed Note: The shaded area in this map reveals the principal distribution region of Pan-Europa’s products. Important facilities are indicated by the following figures: 1. Headquarters, Brussels, Belgium 2. Plant, Antwerp, Belgium 3. Plant, Strasbourg, France 4. Plant, Nuremberg, Germany 5. Plant, Hamburg, Germany
81721_Ch02.indd 89
6. Plant, Copenhagen, Denmark 7. Plant, Svald, Sweden 8. Plant, Nelly-on-Mersey, England 9. Plant, Caen, France 10. Plant, Melun, France
9/16/08 11:36:06 PM
90
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
EXHIBIT 2 Summary of Financial Results (all values in : millions except per-share amounts)
Fiscal Year Ending December 31 Gross sales Net income Earnings per share Dividends Total assets Shareholders’ equity (book value) Shareholders’ equity (market value)
1990
1991
1992
1,076 51 0.75 20 477 182
1,072 49 0.72 20 580 206
1,074 37 0.54 20 656 235
453
400
229
failures in new-product introductions. Most members of management wanted to expand the company’s market presence and introduce more new products to boost sales. These managers hoped that increased market presence and sales would improve the company’s market value. Pan-Europa’s stock was currently at eight times earnings, just below book value. This price/earnings ratio was below the trading multiples of comparable companies, but it gave little value to the company’s brands. Resource Allocation The capital budget at Pan-Europa was prepared annually by a committee of senior managers who then presented it for approval by the board of directors. The committee consisted of five managing directors, the président directeur-général (PDG), and the finance director. Typically, the PDG solicited investment proposals from the managing directors. The proposals included a brief project description, a financial analysis, and a discussion of strategic or other qualitative considerations. As a matter of policy, investment proposals at PanEuropa were subjected to two financial tests, payback and internal rate of return (IRR). The tests, or hurdles, had been established in 1991 by the management committee and varied according to the type of project:
Type of Project 1. New product or new markets 2. Product or market extension 3. Efficiency improvements 4. Safety or environmental
81721_Ch02.indd 90
Minimum Acceptable IRR
Maximum Acceptable Payback Years
12% 10% 8% No test
6 years 5 years 4 years No test
In January 1993, the estimated weighted-average cost of capital (WACC) for Pan-Europa was 10.5 percent. In describing the capital-budgeting process, the finance director, Trudi Lauf, said, “We use the sliding scale of IRR tests as a way of recognizing differences in risk among the various types of projects. Where the company takes more risk, we should earn more return. The payback test signals that we are not prepared to wait for long to achieve that return.” Ownership and the Sentiment of Creditors and Investors Pan-Europa’s 12-member board of directors included three members of the Verdin family, four members of management, and five outside directors who were prominent managers or public figures in northern Europe. Members of the Verdin family combined owned 20 percent of Pan-Europa’s shares outstanding, and company executives owned 10 percent of the shares. Venus Asset Management, a mutual-fund management company in London, held 12 percent. Banque du Bruges et des Pays Bas held 9 percent and had one representative on the board of directors. The remaining 49 percent of the firm’s shares were widely held. The firm’s shares traded in London, Brussels, and Frankfurt. At a debt-to-equity ratio of 125 percent, Pan-Europa was leveraged much more highly than its peers in the European consumer-foods industry. Management had relied on debt financing significantly in the past few years to sustain the firm’s capital spending and dividends during a period of price wars initiated by Pan-Europa. Now, with the price wars finished, Pan-Europa’s bankers (led by Banque du Bruges) strongly urged an aggressive program of debt reduction. In any event, they were not prepared to finance increases in leverage beyond the current level. The president of Banque du Bruges had remarked at a recent board meeting, Restoring some strength to the right-hand side of the balance sheet should now be a first priority. Any expansion of assets should be financed from the cash flow after debt amortization until the debt ratio returns to a more prudent level. If there are crucial investments that cannot be funded this way, then we should cut the dividend! At a price-to-earnings ratio of eight times, shares of Pan-Europa common stock were priced below the average multiples of peer companies and the average multiples of all companies on the exchanges where
9/16/08 11:36:06 PM
CASE
Pan-Europa was traded. This was attributable to the recent price wars, which had suppressed the company’s profitability, and to the well-known recent failure of the company to seize significant market share with a new product line of flavored mineral water. Since January 1992, all of the major securities houses had been issuing “sell” recommendations to investors in PanEuropa shares. Venus Asset Management in London had quietly accumulated shares during this period, however, in the expectation of a turnaround in the firm’s performance. At the most recent board meeting, the senior managing director of Venus gave a presentation in which he said, Cutting the dividend is unthinkable, as it would signal a lack of faith in your own future. Selling new shares of stock at this depressed price level is also unthinkable, as it would impose unacceptable dilution on your current shareholders. Your equity investors expect an improvement in performance. If that improvement is not forthcoming, or worse, if investors’ hopes are dashed, your shares might fall into the hands of raiders like Carlo de Benedetti or the Flick brothers.1 At the conclusion of the most recent meeting of the directors, the board voted unanimously to limit capital spending in 1993 to : 80 million. Members of the Senior Management Committee The capital budget would be prepared by seven senior managers of Pan-Europa. For consideration, each project had to be sponsored by one of the managers present. Usually the decision process included a period of discussion followed by a vote on two to four alternative capital budgets. The various executives were well known to each other: Wilhelmina Verdin (Belgian), PDG, age 57. Granddaughter of the founder and spokesperson on the board of directors for the Verdin family’s interests. Worked for the company her entire career, with significant experience in brand management. Elected “European Marketer of the Year” in 1982 for successfully introducing low-fat yogurt and ice cream, the first major roll-out of this type of product. Eager to position the company for long1 De Benedetti of Milan and the Flick brothers of Munich were leaders of prominent hostile-takeover attempts in recents years.
81721_Ch02.indd 91
91
term growth but cautious in the wake of recent difficulties. Trudi Lauf (Swiss), finance director, age 51. Hired from Nestlé in 1982 to modernize financial controls and systems. Had been a vocal proponent of reducing leverage on the balance sheet. Also had voiced the concerns and frustrations of stockholders. Heinz Klink (German), managing director for Distribution, age 49. Oversaw the transportation, warehousing, and order-fulfillment activities in the company. Spoilage, transport costs, stock-outs, and control systems were perennial challenges. Maarten Leyden (Dutch), managing director for Production and Purchasing, age 59. Managed production operations at the company’s 14 plants. Engineer by training. Tough negotiator, especially with unions and suppliers. A fanatic about production-cost control. Had voiced doubts about the sincerity of creditors’ and investors’ commitment to the firm. Marco Ponti (Italian), managing director for Sales, age 45. Oversaw the field sales force of 250 representatives and planned changes in geographical sales coverage. The most vocal proponent of rapid expansion on the senior-management committee. Saw several opportunities for ways to improve geographical positioning. Hired from Unilever in 1985 to revitalize the sales organization, which he successfully accomplished. Fabienne Morin (French), managing director for Marketing, age 41. Responsible for marketing research, new-product development, advertising, and, in general, brand management. The primary advocate of the recent price war, which, although financially difficult, realized solid gains in market share. Perceived a “window of opportunity” for product and market expansion and tended to support growth-oriented projects. Nigel Humbolt (British), managing director for Strategic Planning, age 47. Hired two years previously from a well-known consulting firm to set up a strategicplanning staff for Pan-Europa. Known for asking difficult and challenging questions about Pan-Europa’s core business, its maturity, and profitability. Supported initiatives aimed at growth and market share. Had presented the most aggressive proposals in 1992, none of which were accepted. Becoming frustrated with what he perceived to be his lack of influence in the organization.
9/16/08 11:36:07 PM
92
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
The Expenditure Proposals The forthcoming meeting would entertain the following proposals: Project 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Replacement and expansion of the truck fleet A new plant Expansion of a plant Development and introduction of new artificially sweetened yogurt and ice cream Plant automation and conveyor systems Effluent water treatment at four plants Market expansion eastward Market expansion southward Development and roll-out of snack foods Networked, computer-based inventory-control system for warehouses and field representatives Acquisition of a leading schnapps brand and associated facilities
1. Replacement and expansion of the truck fleet. Heinz Klink proposed to purchase 100 new refrigerated tractortrailer trucks, 50 each in 1993 and 1994. By doing so, the company could sell 60 old, fully depreciated trucks over the two years for a total of :1.2 million. The purchase would expand the fleet by 40 trucks within two years. Each of the new trailers would be larger than the old trailers and afford a 15 percent increase in cubic meters of goods hauled on each trip. The new tractors would also be more fuel and maintenance efficient. The increase in number of trucks would permit more flexible scheduling and more efficient routing and servicing of the fleet than at present and would cut delivery times and, therefore, possibly inventories. It would also allow more frequent deliveries to the company’s major markets, which would reduce the loss of sales caused by stock-outs. Finally, expanding the fleet would support geographical expansion over the long term. As shown in Exhibit 3, the total net investment in trucks of : 20 million and the increase in working capital to support added maintenance, fuel, payroll, and inventories of : 2 million was expected to yield total cost savings and added sales potential of : 7.7 million over the next seven years. The resulting IRR was estimated to be 7.8 percent, marginally below the minimum 8 percent required return on efficiency projects. Some of the managers wondered if this project would be more properly classified as “efficiency” than “expansion.” 2. A new plant. Maarten Leyden noted that PanEuropa’s yogurt and ice-cream sales in the southeastern
81721_Ch02.indd 92
region of the company’s market were about to exceed the capacity of its Melun, France, manufacturing and packaging plant. At present, some of the demand was being met by shipments from the company’s newest, most Expenditure (€ millions)
Sponsoring Manager
22 30 10 15
Klink, Distribution Leyden, Production Leyden, Production Morin, Marketing
14 4 20 20 18 15
Leyden, Production Leyden, Production Ponti, Sales Ponti, Sales Morin, Marketing Klink, Distribution
40
Humbolt, Strategic Planning
efficient facility, located in Strasbourg, France. Shipping costs over that distance were high, however, and some sales were undoubtedly being lost when the marketing effort could not be supported by delivery. Leyden proposed that a new manufacturing and packaging plant be built in Dijon, France, just at the current southern edge of Pan-Europa’s marketing region, to take the burden off the Melun and Strasbourg plants. The cost of this plant would be :25 million and would entail :5 million for working capital. The :14 million worth of equipment would be amortized over seven years, and the plant over ten years. Through an increase in sales and depreciation, and the decrease in delivery costs, the plant was expected to yield after-tax cash flows totaling :23.75 million and an IRR of 11.3 percent over the next ten years. This project would be classified as a market extension. 3. Expansion of a plant. In addition to the need for greater production capacity in Pan-Europa’s southeastern region, its Nuremberg, Germany, plant had reached full capacity. This situation made the scheduling of routine equipment maintenance difficult, which, in turn, created production-scheduling and deadline problems. This plant was one of two highly automated facilities that produced Pan-Europa’s entire line of bottled water, mineral water, and fruit juices. The Nuremberg plant supplied central and western Europe. (The other plant, near Copenhagen, Denmark, supplied Pan-Europa’s northern European markets.)
9/16/08 11:36:07 PM
81721_Ch02.indd 93
23.75 6 5 11.3% 10.0% 1.3% 0.99 1.87 0.30
(30.00) 2.00 5.00 5.50 6.00 6.25 6.50 6.75 5.00 5.25 5.50
The effluent treatment program is not included in this exhibit.
7.70 6 4 7.8% 8.0% 0.2% 1.92 0.13 0.02
(11.40) (7.90) 3.00 3.50 4.00 4.50 5.00 7.00
7.25 6 5 11.2% 10.0% 1.2% 0.28 0.55 0.09
(10.00) 1.25 1.50 1.75 2.00 2.25 2.50 1.50 1.50 1.50 1.50
10.00
Expanded Plant
New Plant 25.00 5.00
3
2
14.00
5 Automation and Conveyer Systems
8
Eastward Southward Expansion Expansion (note 5) (note 5)
7
22.50 7 6 17.3% 12.0% 5.3% 5.21 3.88 0.69
(5.00) (5.00) (5.00) 3.00 3.00 4.00 4.50 5.00 5.50 6.00 6.50 5.25 6 4 8.7% 8.0% 0.7% 0.87 0.32 0.06
(14.00) 2.75 2.75 2.75 2.75 2.75 2.75 2.75
37.50 5 6 21.4% 12.0% 9.4% 11.99 9.90 1.75
(20.00) 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 32.50 6 6 18.8% 12.0% 6.8% 9.00 7.08 1.25
(20.00) 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50
20.00 20.00 EXPECTED FREE CASH FLOWS (note 4)
15.00
Artificial Sweetener
4
28.50 5 6 20.5% 12.0% 8.5% 8.95 7.31 1.29
(18.00) 3.00 4.00 4.50 5.00 5.00 5.00 5.00 5.00 5.00 5.00
15.00 3.00
Snack Foods
9
11
4.00 3 4 16.2% 8.0% 8.2% 1.16 1.78 0.69
(12.00) 5.50 5.50 5.00
15.00
134.00 5 6 28.7% 12.0% 16.7% 47.97 41.43 7.33
(15.00) (20.00) 5.00 9.00 11.00 13.00 15.00 17.00 19.00 21.00 59.00
30.00 10.00
InventoryStrategic Control Acquisition System (note 6)
10
This reflects :11 million spent both initially and at the end of year 1. Free cash flow incremental profit or cost savings after taxes depreciation investment in fixed assets and working capital. Franchisees would gradually take over the burden of carrying receivables and inventory. :15 million would be spent in the first year, 20 million in the second, and 5 million in the third.
3 4 5 6
The equivalent annuity of a project is that level annual payment over 10 years that yields a net present value equal to the NPV at the minimum required rate of return for that project. Annuity corrects for differences in duration among various projects. For instance, project 5 lasts only 7 years and has an NPV of 0.32 million; a 10-year stream of annual cash flows of 0.05 million, discounted at 8.0 percent (the required rate of return) also yields an NPV of 0.32 million. In ranking projects on the basis of equivalent annuity, bigger annuities create more investor wealth than smaller annuities.
2
1
0 1 2 3 4 5 6 7 8 9 10
Year
20.00 2.00
1 Expand Truck Fleet (note 3)
Free Cash Flows and Analysis of Proposed Projects 1 (all values in : millions)
Undiscounted Sum Payback (years) Maximum Payback Accepted IRR Minimum Accepted ROR Spread NPV at Corp. WACC (10.5%) NPV at Minimum ROR Equivalent Annuity (note 2)
Investment Property Working Capital
Project
EXHIBIT 3
CASE
93
9/16/08 11:36:08 PM
94
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
The Nuremberg plant’s capacity could be expanded by 20 percent for :10 million. The equipment (:7 million) would be depreciated over seven years, and the plant over ten years. The increased capacity was expected to result in additional production of up to :1.5 million per year, yielding an IRR of 11.2 percent. This project would be classified as a market extension. 4. Development and introduction of new artificially sweetened yogurt and ice cream. Fabienne Morin noted that recent developments in the synthesis of artificial sweeteners were showing promise of significant cost savings to food and beverage producers as well as stimulating growing demand for low-calorie products. The challenge was to create the right flavor to complement or enhance the other ingredients. For ice-cream manufacturers, the difficulty lay in creating a balance that would result in the same flavor as was obtained when using natural sweeteners; artificial sweeteners might, of course, create a superior taste. :15 million would be needed to commercialize a yogurt line that had received promising results in laboratory tests. This cost included acquiring specialized production facilities, working capital, and the cost of the initial product introduction. The overall IRR was estimated to be 17.3 percent. Morin stressed that the proposal, although highly uncertain in terms of actual results, could be viewed as a means of protecting present market share, because other high-quality ice-cream producers carrying out the same research might introduce these products; if the Rolly brand did not carry an artificially sweetened line and its competitors did, the Rolly brand might suffer. Morin also noted the parallels between innovating with artificial sweeteners and the company’s past success in introducing low-fat products. This project would be classed in the new-product category of investments. 5. Plant automation and conveyor systems. Maarten Leyden also requested :14 million to increase automation of the production lines at six of the company’s older plants. The result would be improved throughout speed and reduced accidents, spillage, and production tie-ups. The last two plants the company had built included conveyer systems that eliminated the need for any heavy lifting by employees. The systems reduced the chance of injury to employees; at the six older plants, the company had sustained an average of 75 missed worker-days per year per plant in the last two years because of muscle injuries sustained in heavy lifting. At an average hourly wage of :14.00 per hour, over :150,000 per year was thus lost, and the possibility always existed
81721_Ch02.indd 94
of more serious injuries and lawsuits. Overall cost savings and depreciation totaling :2.75 million per year for the project were expected to yield an IRR of 8.7 percent. This project would be classed in the efficiency category. 6. Effluent water treatment at four plants. Pan-Europa preprocessed a variety of fresh fruits at its Melun and Strasbourg plants. One of the first stages of processing involved cleaning the fruit to remove dirt and pesticides. The dirty water was simply sent down the drain and into the Seine or Rhine rivers. Recent European Community directives called for any waste water containing even slight traces of poisonous chemicals to be treated at the sources and gave companies four years to comply. As an environmentally oriented project, this proposal fell outside the normal financial tests of project attractiveness. Leyden noted, however, that the water-treatment equipment could be purchased today for :4 million; he speculated that the same equipment would cost :10 million in four years when immediate conversion became mandatory. In the intervening time, the company would run the risks that European Community regulators would shorten the compliance time or that the company’s pollution record would become public and impair the image of the company in the eyes of the consumer. This project would be classed in the environmental category. 7. and 8. Market expansions eastward and southward. Marco Ponti recommended that the company expand its market eastward to include eastern Germany, Poland, Czechoslovakia, and Austria and/or southward to include southern France, Switzerland, Italy, and Spain. He believed the time was right to expand sales of ice cream, and perhaps yogurt, geographically. In theory, the company could sustain expansions in both directions simultaneously, but practically, Ponti doubted that the sales and distribution organizations could sustain both expansions at once. Each alternative geographical expansion had its benefits and risks. If the company expanded eastward, it could reach a large population with a great appetite for frozen dairy products, but it would also face more competition from local and regional ice cream manufacturers. Moreover, consumers in eastern Germany, Poland, and Czechoslovakia did not have the purchasing power that consumers did to the south. The eastward expansion would have to be supplied from plants in Nuremberg, Strasbourg, and Hamburg. Looking southward, the tables were turned: more purchasing power and less competition but also a smaller consumer appetite for ice cream and yogurt. A southward expansion would require building consumer demand for
9/16/08 11:36:09 PM
CASE
premium-quality yogurt and ice cream. If neither of the plant proposals (i.e., proposals 2 and 3) were accepted, then the southward expansion would need to be supplied from plants in Melun, Strasbourg, and Rouen. The initial cost of either proposal was : 20 million of working capital. The bulk of this project’s costs was expected to involve the financing of distributorships, but over the ten-year forecast period, the distributors would gradually take over the burden of carrying receivables and inventory. Both expansion proposals assumed the rental of suitable warehouse and distribution facilities. The after-tax cash flows were expected to total : 37.5 million for eastward expansion and : 32.5 million for southward expansion. Marco Ponti pointed out that eastward expansion meant a higher possible IRR but that moving southward was a less risky proposition. The projected IRRs were 21.4 percent and 18.8 percent for eastern and southern expansion, respectively. These projects would be classed in the new market category. 9. Development and roll-out of snack foods. Fabienne Morin suggested that the company use the excess capacity at its Antwerp spice- and nut-processing facility to produce a line of dried fruits to be test-marketed in Belgium, Britain, and the Netherlands. She noted the strength of the Rolly brand in those countries and the success of other food and beverage companies that had expanded into snack-food production. She argued that Pan-Europa’s reputation for wholesome, quality products would be enhanced by a line of dried fruits and that name association with the new product would probably even lead to increased sales of the company’s other products among health-conscious consumers. Equipment and working-capital investments were expected to total :15 million and :3 million, respectively, for this project. The equipment would be depreciated over seven years. Assuming the test market was successful, cash flows from the project would be able to support further plant expansions in other strategic locations. The IRR was expected to be 20.5 percent, well above the required return of 12 percent for new-product projects. 10. Networked, computer-based inventory-control system for warehouses and field representatives. Heinz Klink had pressed for three years unsuccessfully for a state-of-the-art computer-based inventory-control system that would link field sales representatives, distributors, drivers, warehouses, and even possibly retailers. The benefits of such a system would be shortening delays in ordering and order processing, better control of inventory, reduction of spoilage, and faster recognition
81721_Ch02.indd 95
95
of changes in demand at the customer level. Klink was reluctant to quantify these benefits, because they could range between modest and quite large amounts. This year, for the first time, he presented a cash-flow forecast, however, that reflected an initial outlay of :12 million for the system, followed by :3 million in the next year for ancillary equipment. The inflows reflected depreciation tax shields, tax credits, cost reductions in warehousing, and reduced inventory. He forecasted these benefits to last for only three years. Even so, the project’s IRR was estimated to be 16.2 percent. This project would be classed in the efficiency category of proposals. 11. Acquisition of a leading schnapps brand and associated facilities. Nigel Humbolt had advocated making diversifying acquisitions in an effort to move beyond the company’s mature core business but doing so in a way that exploited the company’s skills in brand management. He had explored six possible related industries, in the general field of consumer packaged goods, and determined that cordials and liqueurs offered unusual opportunities for real growth and, at the same time, market protection through branding. He had identified four small producers of well-established brands of liqueurs as acquisition candidates. Following exploratory talks with each, he had determined that only one company could be purchased in the near future, namely, the leading private European manufacturer of schnapps, located in Munich. The proposal was expensive: :15 million to buy the company and :25 million to renovate the company’s facilities completely while simultaneously expanding distribution to new geographical markets.2 The expected returns were high: after-tax cash flows were projected to be :134 million, yielding an IRR of 28.7 percent. This project would be classed in the new-product category of proposals. Conclusion Each member of the management committee was expected to come to the meeting prepared to present and defend a proposal for the allocation of Pan-Europa’s capital budget of :80 million. Exhibit 3 summarizes the various projects in terms of their free cash flows and the investment-performance criteria. Reprinted from Journal of Product Innovation Management, Vol. 16, No. 1, pp. 58–69, 1999. Copyright ©1999 with permission from Elsevier Science Publishers. 2 Exhibit 3 shows negative cash flows amounting to only :35 million. The difference between this amount and the :40 million requested is a positive operating cash flow of :5 million in year 1 expected from the normal course of business.
9/16/08 11:36:10 PM
96
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
QUESTIONS 1. Strategically, what must Pan-Europa do to keep from becoming the victim of a hostile takeover? What rows/ categories in Exhibit 2 will thus become critically important in 1993? What should Pan-Europa do now that they have won the price war? Who should lead the way for Pan-Europa? 2. Using NPV, conduct a straight financial analysis of the investment alternatives and rank the projects. Which NPV of the three should be used? Why? Suggest a way to evaluate the effluent project. 3. What aspects of the projects might invalidate the ranking you just derived? How should we correct for each investment’s time value of money, unequal lifetimes, riskiness, and size? 4. Reconsider the projects in terms of: • are any “must do” projects of the nonnumeric type? • what elements of the projects might imply greater or lesser riskiness?
•
might there be any synergies or conflicts between the projects? • do any of the projects have nonquantitative benefits or costs that should be considered in an evaluation? 5. Considering all the above, what screens/factors might you suggest to narrow down the set of most desirable projects? What criteria would you use to evaluate the projects on these various factors? Do any of the projects fail to pass these screens due to their extreme values on some of the factors? 6. Divide the projects into the four Project Profile Process categories of incremental, platform, breakthrough, and R&D. Draw an aggregate project plan and array the projects on the chart. 7. Based on all the above, which projects should the management committee recommend to the Board of Directors?
The following reading describes the approach Hewlett-Packard uses to select and monitor its projects for relevance to the firm’s strategic goals. The article describes the behavioral aspects of the process as well as many of the technical tools, such as the aggregate project plan, the plan of record, and the software aids they employed. In addition, the authors give tips and identify pitfalls in the process so anyone else implementing their approach will know what problems to watch out for.
D I R E C T E D
R E A D I N G
FROM EXPERIENCE: LINKING PROJECTS TO STRATEGY R. L. Englund and R. J. Graham Growth in organizations typically results from successful projects that generate new products, services, or procedures. Managers are increasingly concerned about getting better results from the projects under way in their organizations and in getting better cross-organizational cooperation. One of the most vocal complaints of project managers is that projects appear almost randomly. The projects seem unlinked to a coherent strategy, and people are unaware of the total number and scope of projects. As a result, people feel they are working at cross-purposes, on too many unneeded projects, and on too many projects generally. Selecting projects
81721_Ch02.indd 96
for their strategic emphasis helps resolve such feelings and is a corner anchor in putting together the pieces of a puzzle that create an environment for successful projects [6]. This article covers a series of steps for linking projects to strategy. These steps constitute a process that can be applied to any endeavor. Included throughout are suggestions for action as well as guidelines to navigate many pitfalls along the path. Process tools help illustrate ways to prioritize projects. The lessons learned are from consulting with many firms over a long time period and from personal experiences in applying the lessons within Hewlett-Packard
9/16/08 11:36:11 PM
DIRECTED READING
Company (HP), a $40 billion plus company where two thirds of its revenue derives from products introduced within the past 2 years.
The Importance of Upper Management Teamwork Developing cooperation across an organization requires that upper managers take a systems approach to projects. That means they look at projects as a system of interrelated activities that combine to achieve a common goal. The common goal is to fulfill the overall strategy of the organization. Usually all projects draw from one resource pool, so they interrelate as they share the same resources. Thus, the system of projects is itself a project, with the smaller projects being the activities that lead to the larger project (organizational) goal. Any lack of upper management teamwork reverberates throughout the organization. If upper managers do not model desired behaviors, there is little hope that the rest of the organization can do it for them. Any lack of upper management cooperation will surely be reflected in the behavior of project teams, and there is little chance that project managers alone can resolve the problems that arise. A council concept is one mechanism used at HP to establish a strategic direction for projects spanning organizational boundaries. A council may be permanent or temporary, assembled to solve strategic issues. As a result, a council typically will involve upper managers. Usually its role is to set directions, manage multiple projects or a set of projects, and aid in cross-organizational issue resolution. Several of these council-like activities become evident through the examples in this article. Employing a comprehensive and systematic approach illustrates the vast and important influence of upper management teamwork on project success. Increasingly evident are companies who initiate portfolio selection committees. We suggest that organizations begin by developing councils
97
to work with project managers and to implement strategy. These councils exercise leadership by articulating a vision, discussing it with the project managers, asking them their concerns about and needs for implementing the strategy, listening carefully to them, and showing them respect so they become engaged in the process. In this way, upper managers and project managers develop the joint vision that is so necessary for implementation of strategy.
Process for Project Selection and Prioritization Once the upper management team is established, they can follow a process to select sets of projects that achieve organizational goals. They are then ideally positioned to implement consistent priorities across all departments. Figure 1 represents a mental model of a way to structure this process. Outputs from the four steps interrelate in a true systems approach. This model comes from experience in researching and applying a thorough approach to all the issues encountered in a complex organization. It is both simple in concept and complex in richness. The authors use the model both as an educational tool and to facilitate management teams through the process. What the Organization Should Do and How to Know When You Are Doing It. First, identify who is leading the process and who should be on the management team. More time spent here putting together a “mission impossible” team pays dividends later by getting up-front involvement of the people who will be affected by the decisions that will be made. Take care not to overlook any key-but-not-so-visible players who later may speak up and jeopardize the plan. This team may consist solely of upper managers or may include project managers, a general manager, and possibly a customer. Include representation of those who can best address the key opportunities and risks facing the organization. Ideally they control the resources and are empowered to make decisions on all projects. The leader needs to get
Figure 1 A systematic approach to selecting projects.
81721_Ch02.indd 97
9/16/08 11:36:12 PM
98
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
explicit commitment from all these people to participate actively in the process and to use the resulting plan when making related decisions. Be aware that behavioral issues become super urgent. This process hits close to home and may have a severe impact on projects that people care personally about. Uncertainty and doubt are created if management does not tread carefully and pay attention to people concerns. The team begins by listing all projects proposed and under way in the organization. Many times this step is a revelation in itself. A usual reaction is, “I didn’t realize we had so many projects going on.” The intent is to survey the field of work and begin the organizing effort, so avoid going into detailed discussion about specific projects at this point. The team clarifies or develops the goals expected from projects. Be careful not to get constrained through considering only current capabilities. Many teams get sidetracked by statements such as “We don’t know how to do that,” effectively curtailing discussion on whether the organization ought to pursue the goal and develop or acquire the capability. Rather, the discussions at this stage center around organizational purpose, vision, and mission. This is a crucial step that determines if the rest of the project selection process can be successful. In the authors’ experience, those organizations with clear, convincing, and compelling visions about what they should be doing move ahead rapidly. Any lack of understanding or commitment to the vision by a member of the team leads to frustration, wheel spinning, and eventual disintegration of the whole process. This pattern is so prevalent that clarity of the goal or strategy is applied as a filter before agreeing to facilitate teams through the process. Organize the projects into categories that will later make it easier to facilitate a decision-making process. Wheelwright and Clark [14] suggest using grids where the axes are the extent of product change and the extent of process change. Some organizations use market segments. The benefit to this effort is that seeing all projects and possible
projects on a continuum allows checking for completeness, gaps, opportunities, and compliance with strategy. This might also be a good time to encourage “out-of-the-box” thinking about new ways to organize the work. Use creative discussion sessions to capture ideas about core competences, competitive advantage, and the like to determine a set of categories most effective for the organization. For example, the categories might be: Evolutionary or derivative—sustaining, incremental, enhancing. Platform—next generation, highly leveraged; and Revolutionary or breakthrough—new core product, process, or business. The actual products in Figure 2 were introduced to the market over time in alphabetical order and positioning shown. Although the figure represents a retrospective view, it illustrates a successful strategy of sequencing projects and products. There is a balanced mix of breakthrough products, such as A, followed by enhancements, B through E, before moving on to new platforms, F through H, and eventually developing a new architecture and product family with L. At the time, this strategy was improvisational [1]; it now represents a learning opportunity for planning new portfolios. No one area of the grid is overpopulated, and where large projects exist there are not too many of them. Another reason to organize projects into these “strategic buckets” is to better realize what business(es) the organization is in. Almost every group the authors work with get caught in the “tyranny of the OR” instead of embracing the “genius of the AND” [2]. In trying to do too many projects and facing the need to make tradeoffs among them, the decision becomes this OR that. In reality, most organizations need a balanced portfolio that creates complete solutions for their customers. They need to do this AND that. The way to achieve this goal is to set limits on the size of each category and then focus efforts on selecting the best set of
Figure 2 Bubble diagram of a product grid for one HP division. Size of bubble size of project.
81721_Ch02.indd 98
9/16/08 11:36:12 PM
DIRECTED READING
projects within each category. The collective set of categories becomes the desired mix, a way of framing the work of the organization. The ideal percentage that constitutes the size of each category can be determined from the collective wisdom of the team or perhaps through experimentation. The organization can learn the right mix over time but only if it makes a concerted effort to do so. Within each category, determine criteria that can assess the “goodness”—quality or best fit—of choices for the plan. A criterion is a standard on which a comparative judgment or decision may be based. Because the types of projects and the objectives within categories may be quite different, develop unique criteria for each category or have a core set of criteria that can be modified. Many teams never get to the point of developing or clarifying criteria, and they usually want to discuss projects before agreeing on criteria; reversing the order is much more effective. Several works on research and development project selection [8, 9, 12] provide a robust set of criteria for consideration. Examples include strategic positioning, probability of success, market size, and availability of staff. Most important is to identify the criteria that are of greatest significance to the organization; fewer are better. However, teams usually need to brainstorm many criteria before focusing on the few. The role of each criterion is to help compare projects, not specify them. Select criteria that can measurably compare how projects support the organizational strategy. For example, one criterion may be degree of impact on HP business as interpreted by a general manager. On a scaling model from 1 to 10, small impact scores a 2, strong a 6, critical to the success of one business an 8, and critical to
81721_Ch02.indd 99
the success of multiple businesses a 10. Most likely all proposed projects meet meaningful specifications and provide value to the organization. The task is to develop tough criteria to select the best of the best. Some organizations use narratives to describe how each project contributes to the vision; others use numerical scores on whether one project is equal, moderate, or strongly better than another. It is also helpful to set thresholds or limits for projects that will be considered for the plan. These help to screen out projects so that later prioritization efforts can focus on fewer projects. Writing a thorough description of each criterion helps ensure understanding of the intent and expectations of data that must be supplied to fulfill it. One team of three or four people at HP spent 5 days working only on the criteria they were to use for decision-making. And this was only the beginning; they next involved customers in the same discussion before reaching consensus and beginning to evaluate choices. An “Aha” occurred when people found they were wrong to assume that everyone meant the same thing by terms such as packaging; some used wider definitions than others did, and the misunderstanding only surfaced through group discussion. Asked if the selection process ever failed the team, its leader replied, “If the results didn’t make sense, it was usually because the criteria weren’t well defined.” Unfortunately, most teams do not exhibit the same patience and discipline that allowed this team to be successful. Before moving to the next step, the team should establish relative importance among criteria. Assign a weighting factor for each criterion. All criteria are important but some more so than others. The example in Figure 3 is the result of one team’s brainstorming session that ultimately
Customer Satisfaction (28%) • Improves service levels • Results in more consistent and accurate information/transactions • Helps ensure services are delivered as expected
Employee Satisfaction (7%) • Improves employee knowledge • Increases employee efficiency or effectiveness • Improves work/life balance promised • Positive impact to employee survey • Helps balance workload
Business Value (46%) • Achieves results that are critical for a specific window of opportunity • Minimizes risk for implementation and ongoing sustainability • Improves integration and relationships with partners • Provides a positive ROI in 2 yrs • Aligns with business goals
Process Effectiveness (19%) • Enables employees to do things right the first time • Increases the use of technology for service delivery • Reduces manual work and non-value added activities • Increases employee self-sufficiency
Figure 3
99
Sample criteria and weighting, plus subcriteria, developed by one HP team.
9/16/08 11:36:12 PM
100
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
led to selecting four criteria. Breakout groups subsequently defined each criterion with subcriteria. They also devised scoring methods to apply the criteria. Collectively they then determined the respective weighting or importance of each criterion (see the Process Tools section for how they did this). Unlike threshold criteria that “gate” whether a project is go or no-go, all projects have to satisfy selection criteria to some extent. Weighting of criteria is the technique that can optimize and determine the best of the best. Another “Aha” that helped teams get through the hurdle to develop effective criteria is when they realized the task at this point is “weighting, not gating.” It is the authors’ experience that criteria, while universally desired, are usually lacking or not formalized. One benefit of effective criteria is the shaping effect it has on behavior in the organization. When people know how projects will be scored, they tend to shape proposals in positive ways to meet the criteria better. A pitfall is when people play games to establish criteria that support personal agendas. Then it is up to the leader to identify and question these tactics. Remind people to support the greater good of the organization. Significant effort could be devoted to the behavioral aspects that become relevant when deciding upon criteria; suffice to say, be warned that this is a touchy area to approach with sensitivity and persuasiveness. What the Organization Can Do. The next step for the team is to gather data on all projects. Use similar factors when describing each project in order to ease the evaluation process. Engage people in extensive analysis and debate to get agreement on the major characteristics for each project. This is a time to ask basic questions about product and project types and how they contribute to a diversified set of projects. Reexamine customer needs, future trends, commercial opportunities, and new markets. The person consolidating the data should challenge assertions about benefits and costs instead of accepting assumptions that may have been put together casually. It is important for each member of the team to assess the quality of the data, looking closely at sources and the techniques for gathering the data. When putting cost figures together, consider using activity-based costing models instead of traditional models based on parts, direct labor, and overhead. Activity-based costing includes the communications, relationship building, and indirect labor costs that usually are required to make a project successful. The team needs to constantly apply screening criteria to reduce the number of projects that will be analyzed in detail. Identify existing projects that can be canceled, downscaled, or reconceived because their resource consumption exceeds initial expectations, costs of materials are higher than expected, or a competitive entry to the market changed the rules of the game. The screening process helps eliminate projects that require extensive resources but are not
81721_Ch02.indd 100
justified by current business strategies; maybe the projects were conceived based on old paradigms about the business. The team can save discussion time by identifying must-do projects or ones that require simple go/no-go decisions, such as legal, personnel, or environmental projects. These fall right through the screens and into the allocation process. Determine if some projects can be postponed until others are complete or until new resources or funding become available. Can project deliverables be obtained from a supplier or subcontractor rather than internally? Involve customers in discussions. The team constantly tests project proposals for alignment with organizational goals. It is not necessary to constrain the process by using the same criteria across all categories of projects. In fact, some teams found that different criteria for each category of projects was more effective. Also, consider adjusting the weighting of criteria as projects move through their life cycles. Kumar et al. [7] documented research showing that the most significant variable for initial screening of projects is the extent to which “project objectives fit the organization’s global corporate philosophy and strategy.” Other factors, such as available science and technology, become significant later during the commercial evaluation stage. A big “Aha” experienced by some teams when confronted with this data is that they usually did it the other way around. That explains why they got into trouble—by focusing on technology or financial factors before determining the link to strategic goals. Cooper (and others before him) report that top-performing companies do not use financial methods for portfolio planning. Rather, they use strategic portfolio management methods where strategy decides project selection [3]. This lesson is still a hotly debated one, especially for those who cling to net present value as the single most important criterion. The difficulty lies in relying upon forecast numbers that are inherently fictitious. The authors’ experience is that teams get much better results tapping their collective wisdom about the merits of each project based upon tangible assessments against strategic goals. Using computed financial numbers more often leads to arguments about computation methods and reliability of the data, resulting in unproductive team dynamics. The next part of gathering data is to estimate the time and resources required for each potential and existing project. Get the data from past projects, statistical projections, or simulations. The HP Project Management Initiative particularly stresses in its organizational initiatives to get accurate bottom-up project data from work breakdown structures and schedules. Reconcile this data with top-down project goals. Document assumptions so that resource requirements can be revisited if there are changes to the basis for an assumption. For new or unknown projects, make a best estimate, focusing first on the investigation phase with the intent to fund only enough work to determine feasibility. The team can revisit the estimates when more infor-
9/16/08 11:36:13 PM
DIRECTED READING
mation becomes available. Constantly improve estimation accuracy over time by tracking actuals with estimated task durations. Next, the team identifies the resource capacity both within and outside the organization that will be available to do projects. Balance project with nonproject work by using realistic numbers for resource availability, taking into account other projects, vacations, meetings, personal appointments, and other interruptions. Tip: a wise planner consumes no more than about 50% of a person’s available time. One assessment about the quality of projects in a portfolio is to look at the rejects. In a story attributed to HP founder Bill Hewlett, he once established a single metric for how he would evaluate a portfolio manager’s performance. He asked to see only the rejects. He reasoned that if the rejects looked good, then the projects that were accepted must be excellent. All the actions in this step of the process are intended to screen many possible projects to find the critical few. The team may take a path through multiple screens or take multiple passes through screens with different criteria to come up with a short list of viable projects. Figure 4 represents one scenario where Screen 1 is a coarse screen that checks for impact on the strategic goal. Subsequent screens apply other criteria when more data are available. Any number of screens may be applied, up to the number n, until the team is satisfied that the remaining projects relate to compelling business needs. These steps actually save time because the next section on analysis can get quite extensive if all possible projects go through it.
Figure 4 Application of criteria screens during a funneling process eliminates the trivial many projects from the critical few that the organization can realistically complete.
81721_Ch02.indd 101
101
It usually is necessary to go through several validation cycles before finishing the next step: the upper management team proposes project objectives, project teams provide preliminary estimates based on scope, schedule, and resources back to management, management is not happy with this response and makes adjustments, and so on. This exercise in due diligence is a healthy negotiation process that results in more realistic projects getting through the funnel. Analyze and Decide on Projects. The next step is to compare estimated resource requirements with available resources. A spreadsheet is useful to depict allocation of resources according to project priority. Part of the analysis is qualitative: Consider the opportunity costs of committing to short-term, opportunistic, or poorly conceived projects that take resources away from future prospects that may be a better fit strategically. Also, avoid selecting “glamorous” new ideas over addressing the tough issues from ongoing projects. Some people lack the stamina to deal with the details of implementation and so are ready to jump to a new solution at the slightest glimmer of hope from the latest technology. This is a recipe for disaster. Also, be careful to balance the important projects rather than giving in to urgent, but not so important, demands. Documenting all the findings and supportive data using a common set of descriptive factors makes it easier to compare similar factors across projects. Use a “project charter” form or a template where all information about each project, its sponsors, and key characteristics is recorded. The team can now prioritize the remaining projects. Focus on project benefits before costs; that way the merits of each project get full consideration. Later include costs to determine the greatest value for the money. Compute overall return from the set of projects, not from individual projects, because some projects may have greater strategic than monetary value. Requiring each and every project to promise a high financial return actually diminishes cooperation across an organization. Also, optimize return over time and continuity or uniformity of revenue from the projects. Some future projects must be funded early to ensure a revenue stream when current projects taper off. Using previously agreed-upon criteria and weighting factors, the team compares each project with every other one within a category. Repeat the process for each criterion. See the discussion and example later in this article about using an analytical hierarchy process (AHP) to facilitate this step. Consider using software to compute results—an ordered list of projects within each category. A pitfall to avoid that engenders fear among the team is showing one list that prioritizes all projects from top to bottom. People get concerned when their project is on the line. It is not fair to compare internal development projects with high grossing products; keep them separated and within their respective categories.
9/16/08 11:36:13 PM
102
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Finally, the team is ready to decide which projects to pursue. Be prepared to do fewer projects and to commit complete resources required by projects that are selected. Decide on a mix of projects consistent with business strategy, such as 50% platform projects, 20% derivative projects, 10% breakthrough projects, and 10% partnerships. Note that these total only 90%; taking some lessons from financial portfolio management, diversify the set of projects by investing in some speculative projects. The team may not be sure which markets or technologies will grow, so buy an “option” and make a small investment to investigate the possibilities. Include experimental projects. It is also important to leave a small percent of development capacity uncommitted to take advantage of unexpected opportunities and to deal with crises when they arise. Wheelwright and Clark [14] cite an organization that reduced the number of its development projects from 30 to 11: “The changes led to some impressive gains . . . as commercial development productivity improved by a factor of three. Fewer products meant more actual work got done, and more work meant more products.” Addressing an internal project management conference, an HP Executive Vice President emphasized the need to focus on doing fewer projects, especially those that are large and complex: “We have to be very selective. You can manage cross-organizational complex programs if you don’t have very many. If you have a lot of them with our culture, it just won’t work. First of all, we need to pick those opportunities very, very selectively. We need to then manage them aggressively across the company. That means have joint teams work together, strong project management and leadership, constant reviews, a framework, a vision, a strong owner—all those things that make a program and project successful.” Subsequently, a number of organizations sought help from the HP Project Management Initiative to systematically reduce 120 projects down to 30. Another organization went from 50 projects down to 17. It appears counter-intuitive, but by prioritizing and more carefully selecting projects, organizations actually get more projects completed. Figure 5 illustrates a document that captures the output of this process. Record projects that are fully funded in an aggregate project plan (in-plan). In a separate section or another document, list projects for future consideration (out-plan); also capture and communicate reasons for delaying or not funding projects. The plan of record (POR) is both a process and a tool used by some organizations at HP to keep track of the total list of projects. It lists all projects under way or under consideration by the entity. If a project is funded and has resources assigned, it has achieved inplan status. Projects below the cutoff line of available resources or that have not yet achieved priority status are on the out-plan. The figure also categorizes the projects and specifies the desired mix.
81721_Ch02.indd 102
Project managers at HP describe one benefit of the POR process as identifying gaps between required and actual resources. For flexible changes, the process gets all people into the communications loop. If people want to add something, the management team has to decide what should be deleted. The process helps two divisions that work together agree on one prioritized list instead of two. They utilize direct electronic connections for bottom-up entry of projects and resources by all project managers into a centralized administration point. Implement the Plan. No job is complete until it is acted upon. The team needs to “evangelize” all others in the organization to use the aggregate project plan or POR to guide people who plan work, make decisions, and execute projects. Although it may be countercultural to do so, do not starve committed projects of the resources they need. The team or the responsible upper managers need to enforce the plan by fully staffing committed projects; that now becomes possible because fewer projects are happening simultaneously. Also, use the plan to identify opportunities for leverage across projects or for process reengineering. Match people skills to project categories to tap their strengths and areas for contribution. The team or a program management office needs to maintain the plan in a central place, such as a project office or online. Make it known to, and accessible by, all people in the organization doing projects, subject to confidentiality requirements. All the work to this point may go for naught if the process, the steps, and the results are not widely communicated. The same people who develop the plan are also the ones who can best update it periodically, perhaps quarterly or as changes occur. Use tools such as an online shared database to gather data directly from project managers about resources needed for each project. This system can be used both to gather data when developing the plan and to update it. View the plan as a “living document” that accurately reflects current realities. The challenge for HP and many companies is to “master both adaptive innovation and consistent execution . . . again and again and again . . . in the context of relentless change. . . . Staying on top means remaining poised on the edges of chaos and time . . . These edges are places of adaptive behavior. They are also unstable. This instability means that managers have to work at staying on the edge” [1]. The advice is clear: the plan is indispensable as a strategic guideline, but don’t fall in love with it! Be prepared to adapt it and to communicate the changes.
Process Tools One tool that can assist in the decision-making process is the AHP [10]. Because of the interactions among many factors affecting a complex decision, it is essential to identify the important factors and the degree that they affect
9/16/08 11:36:13 PM
Figure 5
An example plan of record showing the mix of projects in priority order and the time line for each project.
DIRECTED READING
81721_Ch02.indd 103
103
9/16/08 11:36:14 PM
104
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
each other before a clear decision can be made. The AHP helps structure a complex situation, identify its criteria and other intangible or concrete factors, measure the interactions among them in a simple way, and synthesize all the information to obtain priorities. The priorities then can be used in a benefit-to-cost determination to decide which projects to select. The AHP organizes feelings and intuition alongside logic in a structured approach to decisionmaking—helpful in complex situations where it is difficult to comprehend multiple variables together. An individual or team focuses on one criterion at a time and applies it step by step across alternatives. A number of sites across HP find value in using AHP. In another example, a team got together to choose among a set of services they will offer to customers. More choices were available than the organization had capacity to support. After defining organizational strategy or product goals, the first task was to identify which criteria to enter into the decision-making process. After give-and-take discussion, they decided that the criteria were customer satisfaction, business value, process effectiveness, and employee satisfaction. Next, the criteria were ranked according to priority by making pairwise comparisons between them. Which is the more desirable criterion and by how much, customer satisfaction or business value? Process effectiveness or employee satisfaction? Business value or process effectiveness? These questions were asked about all possible pairs. Each potential project or service then was scored underneath each criterion, and decisions were made about which projects to include in the portfolio, based upon existing resources. This team went on to create a POR similar to Figure 5. A detailed explanation for computing the priority scores and the final rank ordering list can be quite complex, involving eigenvalues and eigenvectors, so it is much easier to get a software package (Expert Choice [4]) that does the
Total Votes
%
50
46
15
30
28
***
14
21
19
4
***
7
7
Business
Customer
Technology
Employee
Business
***
16
16
18
Customer
2
***
13
Technology
2
5
Employee
3
Figure 6
81721_Ch02.indd 104
computations. As an alternative, a spreadsheet could be constructed to normalize the numbers. This process appears complex and analytical but is easy when the software handles the computations, and the management team concentrates on the comparisons. It is thorough in guiding the team to consider all criteria, both emotional and logical, and to apply them to all projects. One team rejected the process as too analytical, so be aware that it does not work for everyone. The key benefit in doing this process is the improved quality of dialogue that occurs among the management team members. In facilitating a number of teams at HP through this process, each one achieved far more progress than they thought possible. People admit that they become addicted to the AHP process. They immediately buy the software. The systematic approach is feasible whether selecting products for a product line, projects that comprise a portfolio, or the best supplier or candidate for a job. In reality, the discussions are more valuable than the analysis. The process in this case provides the discipline that makes the dialogue happen. Frame [5] offers an alternative “poor man’s hierarchy.” He puts selection criteria along the side as well as across the top of a grid. If the criterion on the side is preferred to the one on the top, put a 1 in the cell. If the criterion on top is preferred, put a 0 in the cell. Diagonals are blanked out where criteria would be compared to themselves. Below the diagonal, put the opposite value from corresponding cells above the diagonal. Then add up the numbers across the rows to get total scores, which provide a rank order. One team at HP modified this process to replace the 1s and 0s with an actual count of how 18 people voted in each pairwise comparison of alternatives. Again, they added up the rows and normalized the results for a priority order and weighted ranking (Figure 6). This simplified hierarchy is especially helpful for weighting criteria. It can be used for prioritizing projects
A simplified hierarchy used by one HP team to weight criteria.
9/16/08 11:36:14 PM
DIRECTED READING
when applied to one criterion at a time. It becomes bulky and less useful when applied to multiple projects over multiple criteria.
Barriers to Implementation Now for a reality check. The model depicted in this article is thorough, and it integrates objective and subjective data. When all is said and done, however, people may throw out the results and make a different decision. Sometimes the reason is a hunch, an instinct, or simply a desire to try something different. Sometimes people have a pet project and use the process to justify its existence, or a hidden agenda may be at play—perhaps the need to maneuver among colleagues, trading projects for favors. Politics at this stage cannot be ignored, nor are they likely to disappear. It is imperative for leaders to become skilled in the political process. Any attempt at leading change in how an organization links projects to strategy is bound to meet resistance. The concept receives almost unanimous intellectual support. Implementing it into the heart and soul of all people in the organization is another story. It goes against the cultural norms in many organizations and conjures up all kinds of resistance if the values it espouses are not the norm in that organization. The path is full of pitfalls, especially if information is presented carelessly or perceived as final when it is work in process. Some people resist because the process is too analytical. Some want decision-making to be purely interactive, intuitive, or the purview of a few people. A complete process cannot be forced upon people if the organization has more immediate concerns or unresolved issues. Resistance occurs when there is no strategy, the strategy is unclear, or people are uncomfortable with the strategy. Work on the process may come to a standstill when people realize how much work is involved to fully link projects to strategy. If the pain is not great enough with the status quo, people are not going to be ready to change. And if people sense that the leader does not authentically believe in the elements, such as the goals, the process, or the tools, they are hesitant to follow with any enthusiasm. When the leader lacks integrity and exhibits incongruity between words and actions, people may go through the motions but do not exert an effort that achieves meaningful results.
Enablers for Effective Implementation It is possible to lead people through this change process if the leader asks many questions, listens to the concerns of all people involved, and seeks to build support so that people feel they have an active role in developing the process [9]. A flexible process works better than a rigid one. Cultivate “champions” who have the credibility and fortitude to carry the process across the organization. Believe that change is possible.
81721_Ch02.indd 105
105
When the effort appears too massive, one approach is to go after the low-hanging fruit. Start with one of the more pressing issues and use the general concepts of this model to address it. Still have a vision for what the organization ultimately can achieve but understand that patience and pacing are necessary to get there. Consider also that this process is hierarchical—it can be applied singularly or collectively, up or down the organization. For people who get frustrated when all linkages are not present, the authors urge teams and individuals to “just do it.” Small changes in initial conditions have enormous consequences. Eventually successes or small wins are noticed. The practices start to permeate an organization. This can happen in the middle, move up, and then over to other organizations. Incidentally, a corporate group like HP’s Project Management Initiative helps facilitate this transformation. We do this by acting as a conduit for success stories and best practices. Over the long run, we believe that organizations that follow a process similar to the one described increase their odds for greater success. This happens because teams of people following a systematic process and using convincing data to support their arguments more often produce better results than individuals. Their projects have more visibility, and the quality of dialogue and decision-making improve. The power of using criteria that are tightly linked with strategy and known by everyone in the organization is the mitigating effect it has to guide behavior in constructive ways. Having a process means it can be replicated and improved over time until it is optimized. It also means other people can learn the process and coach others, thereby creating a learning organization. References 1. Brown, S. L., and K. M. Eisenhardt. Competing on the Edge: Strategy as Structured Chaos. Boston: Harvard Business School Press, 1998. 2. Collins, J. C. and J. I. Porras. Built to Last: Successful Habits of Visionary Companies. New York: HarperCollins, 1994. 3. Cooper, R. G., S. J. Edgett, and E. J. Kleinschmidt. Portfolio Management for New Products. Reading, MA: Addison-Wesley, 1998. 4. “Expert Choice,” Pittsburgh, PA: Expert Choice Inc. (see www.expertchoice.com). 5. Frame, J. D. The New Project Management: Tools for an Age of Rapid Change, Corporate Reengineering, and Other Business Realities. San Francisco: JosseyBass Publishers, 1994. 6. Graham, Robert J. and Randall L. Englund. Creating an Environment for Successful Projects: The
9/16/08 11:36:14 PM
106
7.
8. 9.
10. 11.
12. 13. 14.
CHAPTER 2 / STRATEGIC MANAGEMENT AND PROJECT SELECTION
Quest to Manage Project Management. San Francisco: Jossey-Bass Publishers, 1997. Kumar, V., et al. “To Terminate or Not an Ongoing R&D Project: A Managerial Dilemma.” IEEE Transactions on Engineering Management 279 (1996). Martino, J. R & D Project Selection. New York: Wiley, 1995. O’Toole, J. Leading Change: Overcoming the Ideology of Comfort and the Tyranny of Custom. San Francisco: Jossey-Bass Publishers, 1995. Saaty, T. L. Decision Making for Leaders. Pittsburgh, PA: RWS, 1990. Stacey, R. D. Managing the Unknowable: Strategic Boundaries Between Order and Chaos in Organizations. San Francisco: Jossey-Bass Publishers, 1992, p. 62. Turtle, Q. C. Implementing Concurrent Project Management. Englewood Cliffs, NJ: Prentice Hall, 1994. Westney, R. E. Computerized Management of Multiple Small Projects. New York: Dekker, 1992. Wheelwright, Stephen and Kim Clark. “Creating Project Plans to Focus Product Development.” Harvard Business Review, March–April (1992).
81721_Ch02.indd 106
Questions 1. Why are successful projects so important to HewlettPackard? 2. How far should an evaluation team go in trying to quantify project contributions to the firm’s mission or goals? What is the role of financial selection criteria in HP’s project selection process? 3. Considerable attention is paid to the measures HP uses to evaluate its projects. Is the aim of carefully defining these measures to simplify the project selection process or something else? 4. What do the aggregate project plan and the plan of record illustrate to upper management? 5. When should out-plan projects be reconsidered for inclusion? 6. What was your impression of the impact that HP’s project selection process had on the number of projects underway? How do you expect HP would score on project management maturity? 7. How did the new project selection process handle nonnumeric type projects? Risk? How did this new process alter new project proposals at HP?
9/16/08 11:36:15 PM
C
H
A
P
T
E
R
3 The Project Manager
PMBOK Guide
Chapters 3 and 4 discuss topics relevant to PMBOK knowledge area 6, Human Resource Management. In the last chapter, we described how projects are evaluated and selected for development. Before more progress can be made, a project manager (PM) must be appointed. Not only is the appointment of a PM (the project “leader”) important to initiate any project, but the PM is probably the major resource input to the project compared to the team, the capital, the materials, and any other inputs—hence our extensive discussion here. As the leader, this person will take responsibility for planning, implementing, and completing the project, beginning with the job of getting things started. Actually, the way to get things started is to hold a meeting. We will delay discussion of the initial project meeting, however, until Chapter 5 because it is the first step in the process of planning the project. The PM can be chosen and installed as soon as the project is selected for funding or at any earlier point that seems desirable to senior management. If the PM is appointed prior to project selection or if the PM originated the project, several of the usual start-up tasks are simplified. On occasion, a PM is chosen late in the project life cycle, usually to replace another PM who is leaving the project for other work. For example, a large agricultural products firm regularly uses a senior scientist as PM until the project’s technical problems are solved and the product has been tested. Then it replaces the scientist with a middle manager from the marketing side of the firm as marketing becomes the focal point of the project. (The transition is difficult and, according to firm spokespeople, the results are sometimes unsatisfactory.) Usually, a senior manager briefs the PM on the project so that the PM can understand where it fits in the general scheme of things in the parent organization, and its priority relative to other projects in the system and to the routine work of the organization. The PM’s first set of tasks is typically to prepare a preliminary budget and schedule, to help select people to serve on the project team, to get to know the client (either internal or external), to make sure that the proper facilities are available, to ensure that any supplies required early in the project life are available when needed, and to take care of the routine details necessary to get the project moving. As people are added to the project, plans and schedules are refined. The details of managing the project through its entire life cycle are spelled out, even to the point of planning for project termination when the work is finally completed.
107
81721_Ch03.indd 107
9/16/08 5:00:10 PM
108
CHAPTER 3 / THE PROJECT MANAGER
Mechanisms are developed to facilitate communication between the PM and top management, the functional areas, and the client. As plans develop still further, the PM holds meetings and briefings to ensure that all those who will affect or be affected by the project are prepared in advance for the demands they will have to meet as the project is implemented. In this chapter we discuss the unique nature of project management and some of the ways project management differs from functional management. Our emphasis is on the role and responsibilities of the PM. We concentrate on the demands placed on the PM, particularly on those unique to project management. For example, consider the differences in the challenges faced by the project manager who must add a security/privacy segment in a software program and those faced by the PM who must design and implement a global database for an international chemical firm. We then identify the skills required by the project manager and link them to the nature of the task faced by the PM. It is best to describe the PM’s job relative to some assumptions about the nature of projects and the organization within which the project must function. We assume that the parent firm is functionally organized and is conducting many projects simultaneously with its ongoing, routine operations. We also assume a fairly large firm, a project that has some technical components, with an output to be delivered to an “arms-length” customer. Clearly, not all, and possibly even not most, projects operate under these circumstances, but these are the most demanding and we address the most difficult problems a PM might have to face. Smaller, simpler projects may not require the tools we will present here, but the PM for these projects should be aware that such tools exist. The term technical components as we apply it includes more than hardware. Any firm with a well-defined methodology of carrying out its mission has a technical component, as we use the phrase. For example, a systems analysis and a statement of functional requirements are among the technical components in most information systems projects, as is the due diligence document in a security offering. Thus far, we have had in mind a PM with reasonably normal skills, and operating under reasonably normal circumstances. In the last three sections of this chapter, we will discuss a major complication for project managers—managing a project being carried out in a multicultural environment. We emphasize the word multicultural, a word that is not synonymous with (but includes) projects whose member organizations and geographical locations may transcend national boundaries. In fact, it is not the differences in national boundaries that matter; it is differences in cultures. Moreover, it is not merely the differences in cultures that matter, it is also differences between the environments within which the projects are conducted— economic, political, legal, and sociotechnical environments. Multicultural projects present major challenges for the PM. They also have the potential for yielding great satisfaction and, one hopes, great rewards. In the interest of clarity, we will delay a discussion of these problems until Section 3.4. In this chapter, two conditions receive special attention. Both have a profound effect on the outcome of the project, and neither is under the complete control of the PM—though the PM can greatly influence both by dealing with the conditions early in the project life. The first of these concerns the degree to which the project has the support of top management. If that support is strong and reasonably unqualified, the project has a much better chance of success (Pinto et al., 1989; Zimmerer et al., 1998). The second condition concerns the general orientation of the project team members. If they are highly oriented toward their individual, functional disciplines, as opposed to the project itself, project success is threatened. If, on the other hand, they tend to be oriented toward the project (that is, problem oriented rather than discipline oriented), the likelihood of success is much greater. As Thomas Hughes (1998) writes about the SAGE and Atlas projects,
81721_Ch03.indd 108
9/16/08 5:00:10 PM
3.1
PROJECT MANAGEMENT AND THE PROJECT MANAGER
109
Teams of engineers, technicians, and scientists polarized around problems rather than disciplines. As a result, new discipline-transcending organizational forms . . . presided over system-building projects rather than discipline-bound departments. The transdisciplinary team approach is still considered front-edge management almost half a century later.
3.1
PROJECT MANAGEMENT AND THE PROJECT MANAGER
The Functional Manager versus the Project Manager The best way to explain the unique role of the PM is to contrast it with that of a functional manager in charge of one of a firm’s functional departments such as marketing, engineering, or finance (see Figure 3-1). Such department heads are usually specialists in the areas they manage. Being specialists, they are analytically oriented and they know something of the details of each operation for which they are responsible. When a technically difficult task is required of their departments, they know how to analyze and attack it. As functional managers, they are administratively responsible for deciding how something will be done, who will do it, and what resources will be devoted to accomplish the task. A PM generally starts his or her career as a specialist in some field who is blithely informed by a senior manager that he or she is being promoted to the position of Project Manager on the Whizbang Project. The PM must now metamorphose from technical caterpillar into generalist butterfly. (For an excellent set of instructions for the transformation, see Matson (1998).) The PM, new or experienced, must oversee many functional areas, each with its own specialists (see Figure 3-2). Therefore, what is required is an ability to put many pieces of a task together to form a coherent whole—that is, the project manager should be more skilled at synthesis, whereas the functional manager should be more skilled at analysis. The functional manager uses the analytic approach and the PM uses the systems approach. The phrase “systems approach” requires a short digression describing briefly what is meant by those words. A system can be defined as a set of interrelated components that accepts inputs and produces outputs in a purposeful manner. This simple statement is a bit more complicated than it appears. First, the word “purposeful” restricts our attention to systems that involve humans in some way. Machines are not purposeful, people are. Second, the
Vice-president marketing
Agency director
Sales
Marketing research
Marketing services
Group administration
Figure 3-1 Functional management organization chart: marketing department of an insurance company.
Project manager
Finance
Figure 3-2
81721_Ch03.indd 109
Engineering
Contracts
Planning
Manufacturing
Procurement
Quality
Project management organization showing typical responsibilities of a project manager.
9/16/08 5:00:10 PM
110
CHAPTER 3 / THE PROJECT MANAGER
notion of “inputs” and “outputs” implies some boundary across which the system’s inputs arrive and outputs depart. This boundary differentiates the system from its “environment.” Third, the nature of the interrelationships between the components defines the “structure” of the system. The analytic method focuses on breaking the components of a system into smaller and smaller elements. We are not saying that this is wrong, it is merely inadequate for understanding a complex system. Regardless of the dissector’s skill or the degree to which, say, a frog is dissected, the dissection allows only a partial understanding of the total animal “frog.” The systems approach maintains that to understand a component, we must understand the system of which the component is a part. And to understand the system, we must understand the environment (or larger system) of which it is a part. At the beginning of his excellent book on the systems approach, John van Gigch (1978) quotes Blaise Pascal: “I find as impossible to know the parts without knowing the whole, as to know the whole without specifically knowing the parts.” Adoption of the systems approach is crucial for the project manager. One cannot understand and, thus, cannot manage a project without understanding the organizational program of which the project is a part, and the organization in which the program exists, as well as the environment of the organization. Consider, if you will, the problem of managing a project devoted to the development of software that will create and maintain a database, and to undertake this task without knowing anything about the decision support system in which the database will be used, or the operating system of the computers that will contain the DSS, or the purposes for which the information in the database will be used, and so forth. The literature on the systems approach is extensive, but Boulding (1956), Churchman (1979), van Gigch (1978), and Sir Stafford Beer’s works (1985) are classics in the field. Our comparison between the PM and the functional manager reveals another crucial difference between the two. The functional manager is a direct, technical supervisor. The project manager is a facilitator and generalist. These simple statements, while true, are misleading. Both require specialized technical knowledge. The functional manager’s knowledge must be in the technology of the process being managed. The PM should be competent in the science of project management (Sahlin, 1998; Zimmerer et al., 1998), but this is not sufficient. The PM must also have technical competence in some aspects of the work being performed on the project. It appears, however, that there is considerable disagreement between researchers on the issue of how much technical knowledge is required. For a review of much of the relevant research on this problem, see Grant et al. (1997). None of this lessens the importance of the PM’s role as facilitator. In our opinion, there is strong evidence that the PM should be both generalist and facilitator and have a reasonably high level of technical competence in the science of the project. We will revisit the issue below when we discuss the need for the PM to have technical credibility. Three major questions face the PM in this task of synthesis: What needs to be done, when must it be done (if the project is not to be late), and how are the resources required to do the job to be obtained. In spite of the fact that the PM is responsible for the project, and depending on how the project is organized, the functional managers will probably make some of the fundamental and critical project decisions. For example, they usually select the people who will actually do the work required to carry out the project. They may also develop the technological design detailing how the project will be accomplished. And they frequently influence the precise deployment of the project’s resources. Once again, depending on how the project is organized, the functional managers have little or no direct responsibility for the results. As presented later (and in Chapter 5, “Project Organization”), this separation of powers between functional and project managers, which may aid in the successful completion of the project, is also a source of considerable “discomfort” for both. Note here that the PM is responsible for organizing, staffing, budgeting, directing, planning, and controlling the project. In other
81721_Ch03.indd 110
9/16/08 5:00:11 PM
3.1
PROJECT MANAGEMENT AND THE PROJECT MANAGER
111
words, the PM “manages” it, but the functional managers may affect the choice of technology to be used by the project and the specific individuals who will do the work. (It is not uncommon, however, for the PM to negotiate with functional managers about the assignment of special individuals to carry out certain project work.) Arguments about the logic or illogic of such an arrangement will fall on deaf ears. The PM cannot allow the functional manager to usurp control of the project. If this happens, work on the project is likely to become secondary to the work of the functional group and the project will suffer. But the functional manager cannot allow the PM to take over authority for technical decisions in the functional area or to control the assignment of functional area personnel. At times, a senior manager (often the PM’s immediate superior) will, in effect, take over the PM’s job by exercising extremely close supervision over every action the PM takes, or will actually tell the PM precisely what to do. All of the powers normally delegated to the PM are withdrawn and the PM’s boss runs the project. This condition is known as micromanagement. It stamps out any creativity or initiative from the PM or project workers, frustrates almost everyone connected with the project, and generally ensures mediocre performance, if not failure. The senior rationalizes the need for control with such statements as: “After all, the project is my responsibility,” or “You must understand how important this project is to the firm,” or “Superboss expects me to keep my eye on everything that goes on around here.” Such nonsense sounds logical until subjected to analysis. The first comment denies the virtue of delegation. The second assumes that everyone except the speaker is stupid. The third is a paean to “self-importance.” To be frank, we do not know how to cure or prevent micromanagement. It is practiced by individuals who have so little trust in their co-workers that they must control everything. Micromanagers are rarely likable enough for anyone to try to help them. Our considered advice to PMs who are micromanaged is to request a transfer. At the other end of the spectrum, the relationship between the PM, the functional managers, the project team, and the PM’s superior may be characterized as “collegial,” and the organization may be populated by talented people. In such organizations conflict is minimized, cooperation is the norm, no one is terribly concerned with who gets the credit, and the likelihood of success is high. We will have more to say later in this chapter and in other chapters about building and maintaining teams. Effective teams tend to operate in a collegial mode. It is worth noting, however, that collegiality without talent leads to failure—even if the project team smiles a lot while failing.
Project Responsibilities The PM’s responsibilities are broad and fall primarily into three separate areas: responsibility to the parent organization, responsibility to the project and the client, and responsibility to the members of the project team. Responsibilities to the firm itself include proper conservation of resources, timely and accurate project communications, and the careful, competent management of the project. Many formal aspects of the communications role will be covered in Chapter 10 when the Project Management Information System is discussed, but one matter must be emphasized here. It is very important to keep senior management of the parent organization fully informed about the project’s status, cost, timing, and prospects. Senior managers should be warned about likely future problems. The PM should note the chances of running over budget or being late, as well as methods available to reduce the likelihood of these dread events. Reports must be accurate and timely if the PM is to maintain credibility, protect the parent firm from high risk, and allow senior management to intercede where needed. Above all, the PM must never allow senior management to be surprised! The PM’s responsibility to the project and client is met by ensuring that the integrity of the project is preserved in spite of the conflicting demands made by the many parties who have
81721_Ch03.indd 111
9/16/08 5:00:11 PM
112
CHAPTER 3 / THE PROJECT MANAGER
legitimate interests in the project. The manager must deal with the engineering department when it resists a change advised by marketing, which is responding to a suggestion that emanated from the client. In the meantime, contract administration says the client has no right to request changes without the submission of a formal Request for Change order. Manufacturing says that the argument is irrelevant because marketing’s suggestion cannot be incorporated into the project without a complete redesign. The PM is in the middle of this turmoil. The PM must sort out understanding from misunderstanding, soothe ruffled feathers, balance petty rivalries, and cater to the demands of the client. One should, of course, remember that none of these strenuous activities relieves the PM of the responsibility of keeping the project on time, within budget, and up to specifications. In Chapter 5 it will become evident that it is very common for the PM to have no direct subordinates in spite of the fact that several, perhaps many, people “work for him/her” on the project. These people form what we have been referring to as the “project team.” In spite of the strange circumstance where people are said to work for someone who is not their boss, the PM’s relationship to the team may be considerably closer than one might expect, particularly when individuals are assigned to spend much or all of their time working on the project. The project manager’s responsibilities to members of the project team are dictated by the finite nature of the project itself and the specialized nature of the team. Because the project is, by definition, a temporary entity and must come to an end, the PM must be concerned with the future of the people who serve on the team. If the PM does not get involved in helping project workers with the transition back to their functional homes or to new projects, then as the project nears completion, project workers will pay more and more attention to protecting their own future careers and less to completing the project on time. These matters are discussed in more detail in Chapter 13, “Project Termination.” Some years ago, it was suggested that highly educated researchers required a “special type” of managing. In one large, research-oriented firm, when a scientist came up with a promising idea, the scientist was appointed project manager. Senior management in the firm decided that the scientist/PM should not be bothered with the mundane details of managing schedules and budgets. As a result, all such information was kept away from him or her and an outside person, with no formal connection to the project and little or no knowledge of the substance of the project, maintained all cost and time data. The result, obvious in retrospect, was that such projects invariably far exceeded budget and schedule. This type of arrangement became known as “tweed coat management.” The notion is based on two interesting assumptions: first, that all research scientists wear tweed jackets (presumably with leather patches on the elbows), and second, that the higher the level of formal education, the lower the level of “street smarts.” To the best of our knowledge, there is no evidence supporting these odd assumptions. Like most people, scientists seem to respond positively to a caring, supportive managerial style. They also seem to be able to keep such records as are required by a reasonable senior management.
PM Career Paths Many firms have a wide variety of types and sizes of projects in progress simultaneously. Of these, it is typical to find that many are not large enough or sufficiently complex to require a full-time manager. Quite a few project managers are in charge of several projects simultaneously. For example, it is not unusual to find that when a medium or large firm undertakes a program to computerize written records, several hundred projects result. In order to ensure consistency and easy intergroup transfer of data, the program is commonly managed by the division or department housing the computer software group rather than being spread out in the units developing or using particular records. The entire process is apt to take several years.
81721_Ch03.indd 112
9/16/08 5:00:11 PM
3.1
PMBOK Guide
PROJECT MANAGEMENT AND THE PROJECT MANAGER
113
At the same time that the computerization program is going on, the firm may be planning and building a new factory (three years), undertaking several dozen R & D projects (one to seven years), improving the landscape surrounding its factory in Mussent Point (two months), considering the acquisition of another firm (six months), upgrading the equipment in its thiotimolene plant (two years), buying art works produced by artists in each city in which the firm operates for display in corporate offices (one year), planning the annual stockholders’ meeting (three months), and doing a large number of other things, many of which are organized as projects. Who manages these projects? Where does the company find people competent to manage such a wide variety of projects? In Chapter 1, we referred to the professionalization and rapid growth of project management, to PMBOK (the project management body of knowledge), as well as to the development of college and university-level courses and degree programs available in the field. Although the percentage of PMs who are academically trained is increasing rapidly, many current project managers have no college-level training in the field. A rapidly growing number of private consulting firms offer instruction in project management as well as programs preparing individuals for the PMI’s examination for certification as Project Management Professionals (PMPs). The great number of fairly small, short-term projects being carried out, when managed by an experienced PM, serve a purpose beyond the output of the projects themselves. They provide an excellent training ground for new project managers who frequently begin their preparation with involvement in some major aspect of a small project. A number of firms, Procter & Gamble for one, often take management trainees and give them some project-management responsibility; for instance, the guidance of a new cosmetic through test procedures to ensure that it is not toxic to users. Such experience serves to teach trainees many things, not the least of which are the importance of an organized plan for reaching an objective, of “follow-through,” of negotiation with one’s co-workers, and of sensitivity to the political realities of organizational life. The skills and experiences gained from managing a project, even a small one, are a scaled-down version of what it is like to run a full-sized organization. Thus, projects provide an excellent growth environment for future executives and for developing managerial skills. One final note on this subject. If we have made the process of project management seem orderly and rational, we apologize. If any single descriptor could be used to characterize project management, the adjective would be “messy.” In an excellent article that should be read by anyone interested in understanding the reality of management, Kotter (1982) has shown that general managers are less organized, less formal, and less structured than college students are led to believe. The same is undoubtedly true of project managers. This fundamental lack of organization and structure makes it all the more important that PMs implement good planning and organizational skills where possible, or the chaos becomes unmanageable. The career path of a PM often starts with participation in small projects, and later in larger projects, until the person is given command over small and then larger projects. For example, the path could be tooling manager for small Project U, project engineer for larger Project V, manufacturing manager for large Project W, deputy project manager for large Project X, project manager for small Project Y, and project manager for large Project Z. The actual establishment of multiple career paths to the top of organizations is more talked about than acted on. Wishful thinking aside, with a very few notable exceptions,* we know of no specific career paths that can take project managers to CEO positions. In a great
*For example, Eli Lilly and Co., the pharmaceutical firm, finds that projects involving new drugs often last 8–12 years. No PM would be willing to manage a project that long without the opportunity for promotion. Lilly, therefore, has established a career path for their PMs that potentially leads to the top of the firm. They already had career paths progressing through “administration” or “R & D” to the top and have clearly demonstrated the reality of both paths.
81721_Ch03.indd 113
9/16/08 5:00:12 PM
114
CHAPTER 3 / THE PROJECT MANAGER
Project Management in Practice The Project Management Career Path at AT&T
As a result of the deregulation of the phone industry, AT&T realized that the old ways of doing business would not be competitive in the new, open market they now faced and decided to reengineer their whole process of providing technology to the market. They decided that organizing by project management would give them better control over their business and bring them a competitive advantage. Thus, they set the goal of becoming the leader in project management in the industry. AT&T had previously used project managers in many of its activities but in a significantly different way. For instance, it was more a project coordination responsibility that could be successfully completed through achieving the activities on a task list. However, the position was of low status and seen as only a temporary activity serving to carry someone on to a better functional manager position. Thus, the reward for doing a good job was to move into a functional position and get out of project management. AT&T realized it would have to change the whole nature of the project management role, and the entire structure of the organization as well, if it were to be successful in this strategy. They needed to develop professional project managers, plus a support system to maintain their abilities and careers in project management. The managerial mentality of two or three years on a project and then moving on to a functional job had to be changed to an attitude of professional pride in project management and staying in the field for the remainder of their careers. Equally important, the organizational mentality of admiring heroic rescues of projects in trouble had to be replaced with admiration for doing a competent job from the beginning and time after time. The reorganization for project management was a major project in itself, including the areas of candi-
81721_Ch03.indd 114
date selection, education and training, compensation, career development, organizational restructuring, and methods development. In terms of organizational structure, a National Project Management (NPM) organization was created at the corporate level, reporting to the service operating vice-president. Reporting to the director of NPM were three project directors spread across the United States, a systems support organization, and a methods and support staff. Program managers, project managers, and their subordinates reported to the project directors. This structure provided an integrated, self-contained project management group. The project management career path now consists of:
• • • • • •
Trainee: a six-month position to learn about project management. Cost Analysis/Schedule Engineer: a 6–18 month team position reporting to a project manager. Site Manager: a 6–12 month position responsible for a large site and reporting to a program manager. Small Project Manager: sole responsibility for a $1M to $3M revenue project. Project Manager: responsible for $3M to $25M projects. Program Manager: responsible for multiyear projects and programs over $25M.
Candidates for the project manager career track are selected from AT&T’s Leadership Continuity Plan, a program to identify the people with the most potential to progress to middle and senior management levels of responsibility, as well as from career people within the organization. Particular skills sought are interpersonal
9/16/08 5:00:12 PM
3.2
leadership skills; oral and written communication skills; a presidential, big-picture perspective; political sensitivity; delegating, problem-solver orientation; optimistic, can-do attitude; planner mentality; kaizen (continuous improvement) spirit; and administrative, in-charge credibility. AT&T’s Project Management organization now includes a staff in Denver and groups of project man-
SPECIAL DEMANDS ON THE PROJECT MANAGER
115
agers in the major cities throughout the nation. These groups now manage over $500 million in projects, ranging in size from $1M to $92M. The project management approach is deemed the most capable in the field, setting the pace for AT&T’s competitors. Source: D. Ono, “Implementing Project Management in AT&T’s Business Communications System,” PM Network, October 1990.
many firms, however, experience as a PM is seen as a mandatory or desirable step on the way up the corporate ladder. The logic of such a view is obvious. The capability of a PM to meet the demands of senior management positions is clearly evidenced by the PM’s ability to achieve the project’s goals without the need for de jure authority while operating in an environment typified by uncertainty, if not chaos.
3.2
SPECIAL DEMANDS ON THE PROJECT MANAGER
PMBOK Guide
This section entails our first discussion of Communications, PMBOK knowledge area 7. The topic will also be discussed further in Sections 3.4, 3.6, 4.3, and 4.4. A number of demands are unique to the management of projects, and the success of the PM depends to a large extent on how capably they are handled. These special demands can be categorized under the following headings.
Acquiring Adequate Resources It was noted earlier that the resources initially budgeted for a project are frequently insufficient to the task. In part, this is due to the natural optimism of the project proposers about how much can be accomplished with relatively few resources. Sometimes, it is caused by purposeful understatement of resource requirements to ensure that a project is accepted for funding. At times it is caused by the great uncertainty associated with a project. Many details of resource purchase and usage are deferred until the project manager knows specifically what resources will be required and when. For instance, there is no point in purchasing a centrifuge now if in nine months we will know exactly what type of centrifuge will be most useful. The good PM knows there are resource trade-offs that need to be taken into consideration. A skilled machinist can make do with unsophisticated machinery to construct needed parts, but a beginning machinist cannot. Subcontracting can make up for an inadequate number of computer programmers, but subcontractors will have to be carefully instructed in the needs of the contractor, which is costly and may cause delays. Crises occur that require special resources not usually provided to the project manager. All these problems produce glitches in the otherwise smooth progress of the project. To deal with these glitches, the PM must scramble, elicit aid, work late, wheedle, threaten, or do whatever seems necessary to keep the project on schedule. On occasion, the additional required resources simply alter the project’s cost-benefit ratio to the point that the project is no longer cost-effective. Obviously, the PM attempts to avoid these situations,
81721_Ch03.indd 115
9/16/08 5:00:12 PM
116
CHAPTER 3 / THE PROJECT MANAGER
Project Management in Practice A Surprise “Director of Storm Logistics” for Katrina
One day, Melvin Wilson was simply a marketing manager for small 1250-employee Mississippi Power in Gulfport, Mississippi. But the next day, after Hurricane Katrina hit New Orleans and Gulfport, he was suddenly the firm’s “Director of Storm Logistics,” responsible for restoring power to 195,000 customers within 12 days. Although Mississippi Power’s primary storm center at headquarters was knocked out, they had a backup storm center 5 miles inland. However, when Wilson got there, the cars were floating in the parking lot, so he moved his small group in charge to a third location, an old service office without electricity or running water. In spite of the phone lines being down, the group managed to get word of their needs to the outside world and within days, 11,000 repairmen from 24 states and Canada came to help. To support the 11,000 workers, the group needed housing, beds, food, clean water, showers, laundry, bulldozers, 5000 trucks, 140,000 gallons of fuel each day, 8000 tetanus shots, and hundreds of other such items. Directing such a massive project as the restoration of power was far beyond the experience of little Mississippi Power’s group, but they succeeded, and the power was restored to every customer who could handle it within 12 days. Source: D. Cauchon, “The Little Company That Could,” USA Today, October 9, 2005.
but some of what happens is beyond the PM’s control. This issue will be dealt with in detail in Chapter 13. The problems of time and budget are aggravated in the presence of a phenomenon that has been long suspected but only proved in the mid-1980s (Gagnon, 1982; Gagnon et al., 1987). The individual who has the responsibility for performing and completing a task sometimes overestimates the time and cost required. That individual’s immediate supervisor often discounts the worker’s pessimism but, in so doing, may underestimate the time and cost. Moving up the management hierarchy, each successive level frequently lowers the time and cost estimates again, becoming more optimistic about the ability of those working for them to do with less—or, perhaps, more forgetful about what things were like when they worked at such jobs. The authors have informally observed—and listened to complaints about—such
81721_Ch03.indd 116
9/16/08 5:00:13 PM
3.2
SPECIAL DEMANDS ON THE PROJECT MANAGER
117
doings in a variety of organizations. We suspect they reflect the superior’s natural tendency to provide challenging work for subordinates and the desire to have it completed efficiently. The mere recognition of this phenomenon does not prevent it. Complaints to upper-level managers are usually met with a hearty laugh, a pat on the back, and a verbal comment such as, “I know you can do it. You’re my best project manager, and you can. . . .” We will consider the doubtful ethics in over/understating resource requirements and project schedules along with other ethical problems in Section 3.3. Another issue may complicate the problem of resource acquisition for the PM. Project and functional managers alike perceive the availability of resources to be strictly limited and thus a strict “win-lose” proposition. Under these conditions, the “winners” may be those managers who have solid political connections with top management. Often, there are times in the life of any project when success or survival may depend on the PM’s “friendship” with a champion or “sponsor” high in the parent organization (Pinto et al., 1989). For example (PMI, 2005), in 1994 a Chicago-based Commemoration Committee was formed to build a four-story, $1 million monument memorializing the 150th anniversary of the Irish potato famine. However, the project manager selected depended on a church sponsor to support the project, but in 1999 the church sponsor who championed the project had moved on to another city and the church thus stopped supporting the project. This illustrates the difficulty of a long, multiyear effort when the sponsor leaves.
Acquiring and Motivating Personnel A major problem for the PM is the fact that most of the people needed for a project must be “borrowed.” With few exceptions, they are borrowed from the functional departments. The PM must negotiate with the functional department managers for the desired personnel, and then, if successful, negotiate with the people themselves to convince them to take on these challenging temporary project assignments. Most functional managers cooperate when the PM comes seeking good people for the project, but the cooperative spirit has its limits. The PM will be asking for the services of the two types of people most needed and prized by the functional manager: first, individuals with scarce but necessary skills and, second, top producers. Both the PM and functional manager are fully aware that the PM does not want a “has-been,” a “never-was,” or a “never-will-be.” Perceptions about the capabilities of individuals may differ, but the PM is usually trying to borrow precisely those people the functional manager would most like to keep. A second issue may reduce the willingness of the functional manager to cooperate with the PM’s quest for quality people. At times, the functional manager may perceive the project as more glamorous than his or her function and hence a potent source of managerial glory. The functional manager may thus be a bit jealous or suspicious of the PM, a person who may have little interest in the routine work of the functional area even if it is the bread and butter of the organization. On its surface, the task of motivating good people to join the project does not appear to be difficult, because the kind of people who are most desired as members of a project team are those naturally attracted by the challenge and variety inherent in project work. Indeed, it would not be difficult except for the fact that the functional manager is trying to keep the same people that the PM is trying to attract. The subordinate who is being seduced to leave the steady life of the functional area for the glamour of a project can be gently reminded that the functional manager retains control of personnel evaluation, salary, and promotion for those people lent out to projects. (A few exceptions to these general rules will be discussed
81721_Ch03.indd 117
9/16/08 5:00:14 PM
118
CHAPTER 3 / THE PROJECT MANAGER
in Chapter 5.) There may even be comments about how easy it is to lose favor or be forgotten when one is “out of sight.” Unless the PM can hire outsiders with proven ability, it is not easy to gather competent people; but having gathered them, they must be motivated to work. Because the functional manager controls pay and promotion, the PM cannot promise much beyond the challenge of the work itself. Fortunately, as Herzberg (1968) has argued, that is often sufficient (also see Pinto et al., 1989). Many of the project personnel are professionals and experts in their respective specialties. Given this, and the voluntary nature of their commitment to the project, there is the assumption that they must be managed “delicately.” It has long been assumed that in order to ensure creativity, professionals require minimal supervision, maximum freedom, and little control. As a matter of fact, William Souder (1974) has shown that the output of R & D laboratories is actually not correlated with the level of freedom in the lab. This finding is significant. The most likely explanation is that individual scientists have unique requirements for freedom and control. Some want considerable direction in their work, whereas others find that a lack of freedom inhibits creativity. Those who need freedom thus tend to work in organizations where they are allowed considerable latitude, and those who desire direction gravitate to organizations that provide it. Motivation problems are often less severe for routine, repeated projects such as those in construction and maintenance, or for projects carried out as the sole activity of an organization (even if it is part of a larger organization). In such cases, the PM probably has considerable de facto influence over salary and promotion. Frequently, the cadre of these projects see themselves as engaged in similar projects for the long term. If the project is perceived as temporary, risky, and important, about all the PM can offer people is the chance to work on a challenging, high-visibility assignment, to be “needed,” and to operate in a supportive climate. For most, this is sufficient incentive to join the project. A story has it that when asked “How do you motivate astronauts?” a representative of NASA responded, “We don’t motivate them, but, boy, are we careful about whom we select.” The issue of motivating people to join and work creatively for a project is closely related to the kind of people who are invited to join. The most effective team members have some common characteristics. A list of the most important of these follows, but only the first is typically considered during the usual selection process. 1. High-quality technical skills Team members should be able to solve most of the technical problems of a project without recourse to outside assistance. Even if the relevant functional department has furnished technical specialists to the project, the exact way technology is applied usually requires adaptation by the project team. In addition, a great many minor technical difficulties occur, always at inconvenient times, and need to be handled rapidly. In such cases, project schedules will suffer if these difficulties must be referred back to the functional departments where they will have to stand in line for a solution along with (or behind) the department’s own problems. 2. Political sensitivity It is obvious that the PM requires political skills of a high order. Although it is less obvious, senior project members also need to be politically skilled and sensitive to organizational politics. As we have noted several times, project success is dependent on support from senior management in the parent organization. This support depends on the preservation of a delicate balance of power between projects and functional units, and between the projects themselves. The balance can be upset by individuals who are politically inept. 3. Strong problem orientation Research conducted by Pill (1971), more than 25 years before Hughes’s (1998) work, has shown that the chances for successful completion of
81721_Ch03.indd 118
9/16/08 5:00:14 PM
3.2
SPECIAL DEMANDS ON THE PROJECT MANAGER
119
a multidisciplinary project are greatly increased if project team members are problemoriented rather than discipline-oriented. Pill indicates that problem-oriented people tend to learn and adopt whatever problem-solving techniques appear helpful, but disciplineoriented individuals tend to view the problem through the eyes of their discipline, ignoring aspects of the problem that do not lie within the narrow confines of their educational expertise. This is, of course, consistent with our insistence earlier in this chapter that the PM should adopt a systems approach to project management. 4. Strong goal orientation Projects do not provide a comfortable work environment for individuals whose focus is on activity rather than on results. Work flow is rarely even, and for the professionals a 60-hour week is common, as are periods when there seems to be little to do. “Clock watchers” will not be successful team members. 5. High self-esteem As we noted earlier, a prime law for projects (and one that applies equally well to the entire organization) is: Never let the boss be surprised. Projects can rapidly get into deep trouble if team members hide their failures, or even a significant risk of failure, from the PM. Individuals on the team should have sufficiently high levels of selfesteem that they are not threatened by acknowledgment of their own errors, or by pointing out possible problems caused by the work of others. They must be comfortable with being held accountable for the results of their work, and be able to maintain high ethical standards in the face of considerable uncertainty about the nature of project outcomes. Egos should be strong enough that all can freely share credit and blame. We trust that the PM is aware that “shooting the messenger who brings bad news” will immediately stop the flow of any negative information from below—though negative surprises from above will probably be more frequent.
Dealing with Obstacles “What I need is a list of specific unknown problems that we will encounter.”* Anonymous manager One characteristic of any project is its uniqueness, and this characteristic means that the PM will have to face and overcome a series of crises. These crises, such as changes in the required project performance (better known as “scope creep”), affect not only the project but the PM as well, and his or her ability to make trade-offs to keep the project on track, a topic discussed further below. From the beginning of the project to its termination, crises appear without warning. The better the planning, the fewer the crises, but no amount of planning can take account of the myriad of changes that can and do occur in the project’s environment. The successful PM is a fire fighter by avocation. At the inception of the project, the “fires” tend to be associated with resources. The technical plans to accomplish the project have been translated into a budget and schedule and *In mid-1988, the authors received this and several other “Management Quotes” in an e-mail communication. They were reported to be entries in a magazine contest and supposedly came from “real-life managers.” They have been set in a distinctive box so they will be easy to recognize. We list other such quotes in similar boxes, but without credit and without repeating this footnote.
81721_Ch03.indd 119
9/16/08 5:00:14 PM
120
CHAPTER 3 / THE PROJECT MANAGER
forwarded up the managerial hierarchy or sent to the client for approval. In an earlier section we noted that some of the budget and schedule is pared away at each successive step up the hierarchy. Each time this happens, the budget and schedule cuts must be translated into changes in the technical plans. Test procedures may be shortened, suppliers’ lead times may be cut. The required cost and schedule adjustments are made, a nip here and a tuck there. To the people affected, these may well be crises. As we will note in Chapter 7, an obvious cure for these crises is to “pad” the budget when it is originally submitted. This is unethical, a bad idea, and generally creates more serious problems than it solves. The PM learns by experience; the wise PM learns from the experiences of others. Every project on which the PM has worked, whether as the project manager or not, is a source of learning. The war stories and horror tales of other PMs are vicarious experiences to be integrated with direct personal experience into a body of lore that will provide early-warning signals of trouble on the way. The lore will also serve as a bank of pretested remedies for trouble already at hand. To be useful, experience must be generalized and organized. Managing a project is much like managing a business. Business firms often develop special routines for dealing with various types of fires. Expediters, order entry clerks, purchasing agents, dispatchers, shippers, and similar individuals keep the physical work of the system moving along from order to shipment. Human resource departments help put out “people fires” just as engineering helps deal with “mechanical fires.” Fire-fighting, to be optimally effective, should be organized so that fires are detected and recognized as early as possible. This allows the fires to be assigned to project team members who specialize in dealing with specific types of fires. Although this procedure does not eliminate crises, it does reduce the pain of dealing with them. This emphasis on the need for fire-fighting raises another issue worth a brief comment. Some individuals thrive on dealing with crises. They have been referred to as “adrenalin junkies.” If a PM finds such people fighting fires in her or his project, the PM should be aware that she or he may have found an arsonist. The wise PM will keep a careful eye on those who appear to be addicted to the excitement of crises. As the project nears completion, obstacles tend to be clustered around two issues: first, last-minute schedule and technical changes, and second, a series of problems that have as their source the uncertainty surrounding what happens to members of the project team when the project is completed. These two types of problems are very different from one another, as well as from the problems that faced the PM earlier in the life cycle of the project. The way to deal with last-minute schedule and technical changes is “the best you can.” Beyond knowing that such changes will occur and will be disruptive to the project, there is little the PM can do except be prepared to “scramble.” Coping with the uncertainty surrounding what happens at the end of a project is a different matter. The issue will be covered at greater length in Chapter 13, but it deserves mention here because it is certainly an obstacle that the PM must overcome. The key to solving such problems is communication. The PM should make open communications between the PM and team members first priority. The notion of “open communications” requires that emotions, feelings, worries, and anxieties be communicated, as well as factual messages.
Making Project Goal Trade-offs The PM must make trade-offs between the project goals of cost, time, and performance and, of course, the ancillary goals. The PM must also make trade-offs between project progress and process—that is, between the technical and managerial functions. The first set of tradeoffs is required by the need to preserve some balance between the project time, cost, and
81721_Ch03.indd 120
9/16/08 5:00:15 PM
3.2
SPECIAL DEMANDS ON THE PROJECT MANAGER
121
performance goals. Conventional wisdom had it that the precise nature of the trade-offs varied depending on the stage of the project life cycle. At the beginning of the life cycle, when the project is being planned, performance was felt to be the most important of the goals, with cost and schedule sacrificed to the technical requirements of the project. Following the design phase, the project builds momentum, grows, and operates at peak levels. Because it accumulates costs at the maximum rate during this period, cost was felt to take precedence over performance and schedule. Finally, as the project nears completion, schedule becomes the high-priority goal, and cost (and perhaps performance) suffers. Research (Kalu 1993) has shown that these assumptions, sensible as they seem, are not true. During the design or formation stage of the project life cycle, there is no significant difference in the importance project managers place on the three goals. It appears that the logic of this finding is based on the assumption that the project should be designed to meet all the client-set goals. If compromises must be made, each of the objectives is vulnerable. At times, however, a higher level of technical performance may be possible that, in the client’s eyes, merits some softening of the cost or schedule goals. For example, a computer software project required that an information system be able to answer queries within 3 seconds 95 percent of the time. The firm designed such a system by ensuring that it would respond within 1.5 seconds 50 percent of the time. By meeting this additional standard, more stringent than that imposed by the client, it was able to meet the specified standard. Schedule is the dominant goal during the buildup stage, being significantly more important than performance, which is in turn significantly more important than cost. Kloppenborg et al. (1990, p. 127) conjectures that this is so because scheduling commitments are made during the buildup stage. Scheduling and performance are approximately tied for primacy during the main stage of the life cycle when both are significantly more important than cost, though the importance of cost increases somewhat between the buildup and main stages. During the final stage, phaseout, performance is significantly more important than schedule, which is significantly more important than cost. Table 3-1 shows the relative importance of each objective for each stage of the project life cycle. The second set of trade-offs concerns sacrificing smoothness of running the project team for technical progress. Near the end of the project it may be necessary to insist that various team members work on aspects of the project for which they are not well trained or which they do not enjoy, such as copying or collating the final report. The PM can get a fairly good reading on team morale by paying attention to the response to such requests. This is, of course, another reason why the PM should select team members who have a strong problem orientation. Discipline-oriented people want to stick to the tasks for which they have been prepared and to which they have been assigned. Problem-oriented people have little hesitation in helping to do whatever is necessary to bring the project in on time, to “spec,” and within budget.
Table 3-1 Relative Importance of Project Objectives during Different Stages of the Project Life Cycle Life Cycle Stage
Formation Buildup Main Phaseout
Cost
Schedule
Performance
1 3 3 3
1 1 1 2
1 2 1 1
Note: 1 high importance. Source: Kloppenborg et al., 1990, p. 78.
81721_Ch03.indd 121
9/16/08 5:00:15 PM
122
CHAPTER 3 / THE PROJECT MANAGER
The PM also has responsibility for other types of trade-offs, ones rarely discussed in the literature of project management. If the PM directs more than one project, he or she must make trade-offs between the several projects. As noted earlier, it is critical to avoid the appearance of favoritism in such cases. Thus, we strongly recommend that when a project manager is directing two or more projects, care should be taken to ensure that the life cycles of the projects are sufficiently different that the projects will not demand the same constrained resources at the same time, thereby avoiding forced choices between projects. In addition to the trade-offs between the goals of a project, and in addition to trade-offs between projects, the PM will also be involved in making choices that require balancing the goals of the project with the goals of the firm. Such choices are common. Indeed, the necessity for such choices is inherent in the nature of project management. The PM’s enthusiasm about a project—a prime requirement for successful project management—can easily lead him or her to unethical decisions: (1) overstate the benefits of a project, (2) understate the probable costs of project completion, (3) ignore technical difficulties in achieving the required level of performance, and (4) make trade-off decisions that are clearly biased in favor of the project and antithetical to the goals of the parent organization. Similarly, this enthusiasm can lead the PM to take risks not justified by the likely outcomes. Finally, the PM must make trade-off decisions between the project, the firm, and his or her own career goals. Depending on the PM’s attitudes toward risk, career considerations might lead the PM to take inappropriate risks or avoid appropriate ones.
Failure and the Risk and Fear of Failure In Chapter 13, we will consider some research on characteristics that seem to be associated with project success or failure, but sometimes it is difficult to distinguish between project failure, partial failure, and success. Indeed, what appears to be a failure at one point in the life of a project may look like success at another. If we divide all projects into two general categories according to the degree to which the project is understood, we find some interesting differences in the nature and timing of perceived difficulties in carrying out a project. These perceptions have a considerable effect on the PM. Assume that Type 1 projects are generally well-understood, routine construction projects. Type 2 projects are at the opposite pole; they are not well understood, and there may be considerable uncertainty about specifically what should be done. When they are begun, Type 1 projects appear simple. As they progress, however, the natural flow of events will introduce problems. Mother Nature seems habitually hostile. The later in the life cycle of the project these problems appear, the more difficult it is to keep the project on its time and cost schedule. Contingency allowances for the time and cost to overcome such problems are often built into the budgets and schedules for Type 1 projects. But unless the project has considerable slack in both budget and schedule, an unlikely condition, little can be done about the problems that occur late in the project life cycle. As everyone from engineers to interior decorators knows, change orders are always received after the final design is set in concrete. And yet, Type 1 projects rarely fail because they are late or over budget, though they commonly are both. They fail because they are not organized to handle unexpected crises and deviations from plan and/ or do not have the appropriate technical expertise to do so (Pinto et al., 1989). Type 2 projects exhibit a different set of problems. There are many difficulties early in the life of the project, most of which are so-called planning problems. By and large, these problems result from a failure to define the mission carefully and, at times, from a failure to get the client’s acceptance on the project mission. Failure to define the mission leads to subsequent problems (e.g., failure to develop a proper schedule/plan, failure to have the proper personnel available to handle the technical problems that will arise, as well as failure to handle the crises
81721_Ch03.indd 122
9/16/08 5:00:15 PM
3.2
SPECIAL DEMANDS ON THE PROJECT MANAGER
123
that occur somewhat later in the project’s life cycle) (Pinto et al., 1990). These failures often appear to result from the inability to solve the project’s technical problems. In fact, they result from a failure to define project requirements and specifications well enough to deal with the technical glitches that always occur. (See Chapter 12 for a further discussion of this subject.) Perhaps more serious are the psychic consequences of such technical snags. The occurrence and solution of technical problems tend to cause waves of pessimism and optimism to sweep over the project staff. There is little doubt that these swings of mood have a destructive effect on performance. The PM must cope with these alternating periods of elation and despair, and the task is not simple. Performance will be strongest when project team members are “turned on,” but not so much that they blandly assume that “everything will turn out all right in the end,” no matter what. Despair is even worse because the project is permeated with an attitude that says, “Why try when we are destined to fail?” Maintaining a balanced, positive outlook among team members is a delicate job. Setting budgets and schedules with sufficient slack to allow for Murphy’s law, but not sufficient to arouse suspicion in cost and time-conscious senior management, is also a delicate job. But who said the PM’s job would be easy?
Breadth of Communication As is the case with any manager, most of the PM’s time is spent communicating with the many groups interested in the project (Mintzberg, 1973). Running a project requires constant selling, reselling, and explaining the project to outsiders, top management, functional departments, clients, and a number of other such parties-at-interest to the project, as well as to members of the project team itself. The PM is the project’s liaison with the outside world, but the manager must also be available for problem solving in the lab, for crises in the field, for threatening or cajoling subcontractors, and for reducing interpersonal conflict between project team members. And all these demands may occur within the span of one day—a typical day, cynics would say. To some extent, every manager must deal with these special demands; but for a PM such demands are far more frequent and critical. As if this were not enough, there are also certain fundamental issues that the manager must understand and deal with so that the demands noted can be handled successfully. First, the PM must know why the project exists; that is, the PM must fully understand the project’s intent. The PM must have a clear definition of how success or failure is to be determined. When making trade-offs, it is easy to get off the track and strive to meet goals that were really never intended by top management. Second, any PM with extensive experience has managed projects that failed. As is true in every area of business we know, competent managers are rarely ruined by a single failure, but repeated failure is usually interpreted as a sign of incompetence. On occasion a PM is asked to take over an ongoing project that appears to be heading for failure. Whether or not the PM will be able to decline such a doubtful honor depends on a great many things unique to each situation: the PM’s relationship with the program manager, the degree of organizational desperation about the project, the PM’s seniority and track record in dealing with projects like the one in question, and other matters, not excluding the PM’s ability to be engaged elsewhere when the “opportunity” arises. Managing successful projects is difficult enough that the PM is, in general, well advised not to volunteer for undertakings with a high probability of failure. Third, it is critical to have the support of top management (Pinto et al., 1989). If support is weak, the future of the project is clouded with uncertainty, and if it is a R & D project, it is more likely to be terminated (Green, 1995). Suppose, for example, that the marketing vice-president is not fully in support of the basic project concept. Even after all the engineering and manufacturing work has been completed, sales may not go all out to push the product. In such a case, only the chief executive officer (CEO) can force the issue, and it
81721_Ch03.indd 123
9/16/08 5:00:15 PM
124
CHAPTER 3 / THE PROJECT MANAGER
is very risky for a PM to seek the CEO’s assistance to override a lukewarm vice-president. If the VP acquiesces and the product fails (and what are the chances for success in such a case?), the project manager looks like a fool. If the CEO does not force the issue, then the VP has won and the project manager may be out of a job. As noted earlier, political sensitivity and acumen are mandatory attributes for the project manager. The job description for a PM should include the “construction and maintenance of alliances with the leaders of functional areas.” Fourth, the PM should build and maintain a solid information network. It is critical to know what is happening both inside and outside the project. The PM must be aware of customer complaints and department head criticism, who is favorably inclined toward the project, when vendors are planning to change prices, or if a strike is looming in a supplier industry. Inadequate information can blind the PM to an incipient crisis just as excessive information can desensitize the PM to early warnings of trouble.
Project Management in Practice The Wreckmaster at a New York Subway Accident At 12:16 a.m., in late August, a 10-car subway train on the Lexington Line beneath New York City jumped the track and crashed in the subway tunnel. Damage was massive—five cars were derailed, one was cut in half, another bent in two, possibly 150 persons injured, four dead. The train ripped out steel-girder support columns used to hold up the tunnel ceiling, as well as the street above which immediately sunk a half inch. Two tracks and a third rail had been ripped out and two signal sets, two switches, and an air compressor room destroyed. When such an emergency occurs, the New York City Transit Authority (NYCTA) immediately appoints a project master, called a “Wreckmaster,” to oversee the handling of the disaster rescue and repair activities, and make sure that operations are returned to a safe condition as soon as possible. In this case, the goal was to have the subway back to normal operation by Tuesday morning rush hour, September 3, after the three-day holiday weekend. Such disasters are handled in eight phases: Phase 1: Respond to injury—Get people out of danger, provide needed medical care, remove bodies and ensure that no victims remain in the debris. Phase 2: Secure the area—Simultaneously with phase 1, eliminate other threats to life and property by disconnecting power, providing emergency lighting and ventilation, stopping other trains
81721_Ch03.indd 124
from entering the area, and keeping nonrelevant pedestrian and vehicular traffic out. Phase 3: Initiate command facilities—Concurrent with phases 1 and 2, set up and activate command and coordination structure for all emergency activities. Phase 4: Remove debris—Collect and remove the elements and debris of the accident which would hinder rescue, clean-up, or repair. Phase 5: Remove damaged equipment—Use cranes, cutting torches, and other equipment to remove the large, major equipment. Phase 6: Facility repair—Repair the facilities as quickly as possible for continuing and normal use. Phase 7: Test—Make certain that all facilities are fully operational and safe by testing under the watchful eye of engineering, operations, and safety. Phase 8: Clean-up—Clean the premises to the best possible state to permit normal operations.
The crash was heard at NYCTA’s Union Square District 4 and about 40 transit police officers ran to assist passengers at the smoke-filled scene. Soon, officers from District 2, the Fire Department, and the Office of Emergency Management joined them. The Fire Department brought fans to help clear the smoke and steel cable to rope the wreckage to the support
9/16/08 5:00:16 PM
3.2
125
SPECIAL DEMANDS ON THE PROJECT MANAGER
A worker looks at the wreckage of a subway car following a derailment. (AP Photo/Emile Wamsteker)
Street
Street
1A Cabinet
Street
Station platform
2 Compression room
Building
3
4
5
1B
6
7
8
9
10
Station platform
E 16th
E. 17th
E. 18th
Legend: Placement of derailed trains 1A Car # 1440 1B Car # 1440 2 Car # 1439
3 4
Car # 1437 Car # 1436
5 6
Car # 1435 Car # 1434
7 8
Car # 1432 Car # 1431
9 Car # 1433 10 Car # 1438
14th Street - Union Square Derailment August 28, 1991
pillars so they could reach people still in the train cars without the roof caving in on them. Buses were dispatched to transport people to hospitals and the Red Cross provided food and drink for the injured. Some rescuers fainted from heat exhaustion as the temperature climbed to over 110 °F degrees in the
81721_Ch03.indd 125
tunnel and two dozen police and fire workers were treated for injuries and smoke inhalation. Transit police officer Emanuel Bowser was riding the train when it crashed but helped people get off for more than four hours after the crash even though he had a broken arm and fingers himself.
9/16/08 5:00:16 PM
126
CHAPTER 3 / THE PROJECT MANAGER
After learning about the crash, NYCTA appointed Larry Gamache, general superintendent of track operations, as Wreckmaster. Larry set up team captains to coordinate activities throughout each phase of the disaster operations. A command center was established at a nearby subway station to direct and coordinate the operations. Gamache formulated a mental flow chart of how work needed to proceed. Each task had to be analyzed to determine what tasks had to precede it and what tasks could be conducted concurrently with it. Gamache also initiated regular meetings for all involved parties. This kept everyone informed of what progress had been made and provided them with estimates of future progress so activities could be coordinated and sequenced. The plan was to remove the wreckage as quickly as possible from one track to allow worktrains to reach the disaster site, bringing needed materials to the site and removing debris. Since work had to continue throughout the Labor Day weekend on 12-hour shifts, facilities for the workers—food, drink, toilets—also had to be provided. Diesel trains pulled out the five cars that didn’t derail, but getting out the other five was a special problem. A new Hoersh hydraulic jacking system was brought in from another district that could lift a 44-ton car, move it sideways, and set it back down on the tracks. Using these jacks reduced by
half the labor required to rerail the cars, thereby significantly expediting the recovery. As work progressed through the long weekend, it became apparent that the disaster recovery plan would meet its Tuesday morning completion goal and, in fact, trains began running again by late evening on Monday.
Lawrence Gamache, Wreckmaster Larry Gamache started at NYCTA 24 years ago as a trackworker and progressed through many managerial positions on his way to general superintendent, track operations. His experience over those years clearly qualified him for the responsibility of this assignment, particularly his involvement as field supervisor of several earlier derailments. He was also highly involved in a three-year subway reconstruction project that required extensive coordination and negotiation with other city agencies, communities, and political leaders, all the while battling inclement weather and difficult conditions—yet, the project was completed ahead of time and well under budget. This experience, too, was valuable in coordinating the activities of the many groups involved in the disaster recovery. Source: S. Nacco, “PM in Crisis Management at NYCTA: Recovering from a Major Subway Accident,” PM Network, February 1992.
Finally, the PM must be flexible in as many ways, with as many people, and about as many activities as possible throughout the entire life of the project. The PM’s primary mode of operation is to trade off resources and criteria accomplishment against one another. Every decision the PM makes limits the scope of future decisions, but failure to decide can stop the project in its tracks. Even here, we have a trade-off. In the end, regardless of the pressures, the PM needs the support of the noninvolved middle and upper-middle management.
Negotiation In order to meet the demands of the job of project manager—acquiring adequate resources, acquiring and motivating personnel, dealing with obstacles, making project goal tradeoffs, handling failure and the fear of failure, and maintaining the appropriate patterns of communication—the project manager must be a highly skilled negotiator. There is almost no aspect of the PM’s job that does not depend directly on this skill. We have noted the need for negotiation at several points in the previous pages, and we will note the need again and again in the pages that follow. The subject is so important, Chapter 4 is devoted to a discussion of the matter.
81721_Ch03.indd 126
9/16/08 5:00:17 PM
3.3
3.3
SELECTING THE PROJECT MANAGER
127
SELECTING THE PROJECT MANAGER Selection of the project manager is one of the two or three most important decisions concerning the project. In this section, we note a few of the many skills the PM should possess in order to have a reasonable chance of success. The following is a list of some of the most popular attributes, skills, and qualities that have been sought when selecting project managers:
• • • • • • • •
A strong technical background A hard-nosed manager A mature individual Someone who is currently available Someone on good terms with senior executives A person who can keep the project team happy One who has worked in several different departments A person who can walk on (or part) the waters
These reasons for choosing a PM are not so much wrong as they are “not right.” They miss the key criterion. Above all, the best PM is the one who can get the job done! As any senior manager knows, hard workers are easy to find. What is rare is the individual whose focus is on the completion of a difficult job, a “closer.” Of all the characteristics desirable in a PM, this drive to complete the task is the most important. If we consider the earlier sections of this chapter, we can conclude that there are four major categories of skills that are required of the PM and serve as the key criteria for selection, given that the candidate has a powerful bias toward task completion. Moreover, it is not sufficient for the PM simply to possess these skills; they must also be perceived by others. The fact and the perception are both important.
Credibility The PM needs two kinds of credibility. First is technical credibility. The PM must be perceived by the client, senior executives, the functional departments, and the project team as possessing sufficient technical knowledge to direct the project. A PM with reasonable technical competence seems to be associated with project success and is seen by project team members to be a “positive” leadership characteristic (Ford et al., 1992; Zimmerer et al., 1998). (We remind the reader that “technical credibility” includes technical knowledge in such arcane fields as accounting, law, psychology, anthropology, religion, history, playwriting, Greek, and a host of other nonhard sciences.) The PM does not need to have a high level of expertise, know more than any individual team members (or all of them), or be able to stand toe-to-toe and intellectually slug it out with experts in the various functional areas. Quite simply, the PM has to have a reasonable understanding of the base technologies on which the project rests, must be able to explain project technology to senior management, and must be able to interpret the technical needs and wants of the client (and senior management) to the project team. Similarly, the PM must be able to hear the problems of the project team and understand them sufficiently to address them, possibly by communicating them to upper management. Second, the PM must be administratively credible. The PM has several key administrative responsibilities that must be performed with apparently effortless skill. One of these responsibilities is to the client and senior management—to keep the project on schedule and within
81721_Ch03.indd 127
9/16/08 5:00:17 PM
128
CHAPTER 3 / THE PROJECT MANAGER
cost and to make sure that project reports are accurate and timely. This can place the PM in an ethically awkward situation sometimes. Another responsibility is to the project team—to make sure that material, equipment, and labor are available when and where needed. Still another responsibility is to represent the interests of all parties to the project (team, management, functional departments, and client) to one another. The PM is truly the “person in the middle.” Finally, the PM is responsible for making the tough trade-off decisions for the project, and must be perceived as a person who has the mature judgment and courage to do so consistently.
Sensitivity The preceding pages contain many references to the PM’s need for political sensitivity. There is no point in belaboring the issue further. In addition to a good, working set of political antennae, the PM needs to sense interpersonal conflict on the project team or between team members and outsiders. Successful PMs are not conflict avoiders. Quite the opposite, they sense conflict early, then confront and deal with it before the conflict escalates into interdepartmental and intradepartmental warfare. The PM must keep project team members “cool.” This is not easy. As with any group of humans, rivalries, jealousies, friendships, and hostilities are sure to exist. The PM must persuade people to cooperate irrespective of personal feelings, to set aside personal likes and dislikes, and to focus on achieving project goals. Finally, the PM needs a sensitive set of technical sensors. It is common, unfortunately, for otherwise competent and honest team members to try to hide their failures. Individuals who cannot work under stress would be well advised to avoid project organizations. In the pressurecooker life of the project, failure is particularly threatening. Remember that we staffed the team with people who are task-oriented. Team members with this orientation may not be able to tolerate their own failures (though they are rarely as intolerant of failure in others), and will hide failure rather than admit to it. The PM must be able to sense when things are being “swept under the rug” and are not progressing properly.
Leadership, Ethics, and Management Style Leadership has been defined (Tannenbaum et al., 1957) as “interpersonal influence, exercised in situations and directed through the communication process, toward the attainment of a specified goal or goals.” Much has been written about how interpersonal influence is generated and the impact of leadership characteristics on team performance. Examples are Jiang et al. (1998); Scott et al. (1998); see also the bibliography. To all the skills and attributes we have mentioned, add enthusiasm, optimism, energy, tenacity, courage, and personal maturity. It is difficult to explain leadership. We tend to recognize it after the fact, rather than before. We define it anecdotally by saying that this person or that one acted like a leader. The PM should capitalize on people’s strengths, cover their weaknesses, know when to take over and when to “give the team its head,” know when to punish and when to reward, know when to communicate and when to remain silent. Above all, the PM should know how to get others to share commitment to the project. In a word, the PM must be a leader. Another aspect of leadership that is important in a project manager is a strong sense of ethics. There is a considerable amount of attention to this topic in the news media these days, both good and bad. For instance, protection payments made to terrorists by firms raise serious ethical issues, as does the tobacco industry’s longstanding public denial of the effects of
81721_Ch03.indd 128
9/16/08 5:00:17 PM
3.3
SELECTING THE PROJECT MANAGER
129
smoking on human health. Nixon (1987) has identified some ethical missteps that are relatively common in business:
• • • • • • • • •
“wired” bids and contracts (the winner has been predetermined) “buy-in” (bidding low with the intent of cutting corners or forcing subsequent contract changes) kickbacks “covering” for team members (group cohesiveness) taking “shortcuts” (to meet deadlines or budgets) using marginal (substandard) materials compromising on safety violating standards consultant (e.g., auditors) loyalties (to employer or to client or to public)
A project manager, particularly in the public sector, may easily become embroiled in the ethics concerning such issues as pollution, public safety, industrial plant locations, the use of public lands, and so on. A Code of Ethics for project managers was created at the PMI 1982 symposium on Project Management (Ireland et al., 1982), updated and approved in 1989, again in 1995, and once more in 2006. The 2006 version of the Code resulted from extended discussions and is roughly 8 times the length of earlier versions—including appendices. It is available to anyone at the PMI website, www.PMI.org. The issue is receiving an increasing amount of attention. A humorous column on the subject published several years ago in the PMI’s magazine PM Network (Phillips, 1995) elicited several irate letters from readers who seemed unsure about whether or not to take the article seriously (cf. “From Our Readers,” PM Network, January 1996). Anyone seriously considering a career in project management should study the new code. It focuses on behavior that will lead to a high trust level between the PM, project team members, senior management, the client, and other stakeholders. The section entitled “Honesty” should be read, reread, and read once again. We will revisit the subjects of honesty and trust in almost every chapter of this book. An “ethics audit” has also been recommended for nonprofit organizations (Schaefer et al., 1998), and we would recommend a similar audit for any firm. The extent of this subject is far beyond what we can cover here, but, fortunately, there are a number of excellent books on the topic (Barry, 1979; Blanchard et al., 1988; Pastin, 1986). A concise bibliography on business ethics is included in Robb (1996). While a great deal has been written about the leadership attributes required or desirable in a project manager, comparatively little has been written about the proper management style for a PM. It has generally been assumed, and we are as guilty as most other writers, that whatever style is good for general managers is also good for project managers. A somewhat informal brand of “participative management” is generally preferred. Of course, each profession (information technology, construction, medicine, research and development in any area of science, ad infinitum) that uses project management is quite certain that its problems are significantly different and more difficult. They argue, therefore, that they require less managerial control. Shenhar (1998) classifies projects across two dimensions and concludes that management style should be adapted to certain differences in the type of project. His dimensions are: (1) the level of technological uncertainty; and (2) the level of system complexity. As the uncertainty increases from “low tech” to “medium tech” to “high tech” to “very high tech,” the appropriate management style progresses from “firm, rigid, and formal” to “moderately firm” to “moderately flexible” to “highly flexible.” As the system complexity increases from
81721_Ch03.indd 129
9/16/08 5:00:18 PM
130
CHAPTER 3 / THE PROJECT MANAGER
“assembly” to “system” to “array,” the style progresses from “in-house informal” to “formal main/subcontractor relationship” to “remote and highly formal.” There are also significant differences in some managerial practices, e.g., the use of project management tools, across the uncertainty and complexity dimensions.
Ability to Handle Stress Throughout this chapter and elsewhere in this book, we have noted that the life of the project manager is rarely serene. While we know of no scientific research on the issue, casual observation leads us to believe that the basic environment surrounding projects is not fundamentally different from the environment existing in the parent organization within which the projects are being conducted. Life in some organizations is quite hectic and projects in those firms and agencies tend to be equally hectic. There are numerous factors in life that cause stress and project managers are as subject to them as other humans. There do, however, appear to be four major causes of stress often associated with the management of projects. First, some PMs never develop a reasonably consistent set of procedures and techniques with which to manage their work. Second, many simply have “too much on their plates.” Third, some have a high need to achieve that is consistently frustrated. Fourth, the parent organization is in the throes of major change. This book is primarily devoted to helping the PM deal with the first cause of stress. As for the second cause, we would remind the PM to include him/herself as a “resource” when planning a project. Almost all project management software packages will signal the planner when a project plan calls for a resource to be used beyond its capacity (see Chapters 9 and 10). Such signals, at least, provide PMs with some evidence with which to discuss the work load with the appropriate senior manager. Concerning the third cause of stress, Slevin (1989) points out that stress results when the demands made on an individual are greater than the person’s ability to cope with them, particularly when the person has a high need for achievement. It is axiomatic that senior managers give the toughest projects to their best project managers. It is the toughest projects that are most apt to be beset with unsolvable problems. The cure for such stress is obvious, except to the senior managers who continue the practice. Finally, in this era of restructuring and downsizing, stress from worry about one’s future is a common condition in modern organizations. Dealing with and reducing these stresses as well as the stress resulting from everyday life is beyond the scope of this book as well as the expertise of its authors. Fortunately, any bookstore will have entire sections devoted to the subject of stress and its relief. We refer the reader to such works.
3.4
PROBLEMS OF CULTURAL DIFFERENCES In this and the following two sections, we raise a number of issues that plague certain projects. Sometimes these projects require cooperation by individuals and groups from different countries. Sometimes they require cooperation by individuals or groups in one country, but from different industries or even from different divisions of the same firm. It is not, however, the geographical or organizations differences that matter, it is the differences in cultures. Moreover, it is not merely the differences in culture that matter, it is also differences in the environments within which projects are conducted, as we mentioned at the start of this chapter, the economic, political, legal, and sociotechnical environments. We will discuss particulars next, but we must emphasize that the differences in culture and environment are not confined to “international” projects, which should be evident. Different industries have different cultures and environments, as do firms from different regions of a
81721_Ch03.indd 130
9/16/08 5:00:18 PM
3.4
PROBLEMS OF CULTURAL DIFFERENCES
131
given country, as do different firms from the same geographical area, as do different divisions of a given firm. While the impacts of these dissimilarities are greatest and most visible in the case of international projects, they exist to some extent any time different organizations (including different parts of one organization) are asked to work together on a project. Inferentially, if a project manager must cope with multiple cultures and different environments, it follows that more than one organization is involved in the project. This fact alone complicates matters. Throughout this book we stress that the PM must manage and reduce conflict between the parties-at-interest or stakeholders in a project: the project team, client, senior management, and the public. One has only to read Hughes (1998, pp. 197 ff.) on the subject of the Boston Central Artery/Tunnel, a chapter aptly titled “Coping with Complexity,” to get a good feel for the issues. If the parties-at-interest represent different nations, industries, and firms, the conflicts and problems besetting the project are greater by an order of magnitude. In particular, the conceptually simple issue of maintaining communications between the various parties becomes, in reality, almost impossibly complex. “Culture” refers to the entire way of life for a group of people. It encompasses every aspect of living and has four elements that are common to all cultures: technology, institutions, language, and arts (The World Book, 1997). The technology of a culture includes such things as the tools used by people, the material things they produce and use, the way they prepare food, their skills, and their attitudes toward work. It embraces all aspects of their material lives. The institutions of a culture make up the structure of the society. This category contains the organization of the government, the nature of the family, the way in which religion is organized as well as the content of religious doctrine, the division of labor, the kind of economic system adopted, the system of education, and the way in which voluntary associations are formed and maintained. Language is another ingredient of all cultures. The language of a culture is always unique because it is developed in ways that meet the express needs of the culture of which it is a part. The translation of one culture’s language into another’s is rarely precise. Words carry connotative meanings as well as denotative meanings. The English word “apple” may denote a fruit, but it also connotes health (“keeps the doctor away”), bribery (“for the teacher”), New York city, a color, a computer, a dance (late 1930s), favoritism (“of my eye”), as well as several other things. Finally, the arts or aesthetic values of a culture are as important to communication as the culture’s language. If communication is the glue that binds a culture together, art is the most efficient means of communicating. Aesthetic values dictate what is found beautiful and satisfying. If a society can be said to have “style,” it is from the culture’s aesthetic values that style has its source.
Culture and the Project A nation’s culture affects projects in many ways. One of the most obvious ways is in how people of different cultures regard time. In the United States and several other Western industrialized nations, time is highly valued as a resource (Smith et al., 1993). We say, “Time is money.” It isn’t, of course, but the expression is one way of expressing impatience with delay and lateness. Latin Americans, on the other hand, hold quite different views of time. The pace of life differs from one culture to another, just as do the values that people place on family or success. The PM conducting a construction project in South America will learn that to be half-an-hour late to a project meeting is to be “on time.” In Japan, lateness causes loss of face. In some cultures, the quality of the work is seen to be considerably more important than ontime delivery. The great value placed on time in the United States and the distaste for tardiness leads to a common perception that U.S. managers are “impatient.”
81721_Ch03.indd 131
9/16/08 5:00:18 PM
132
CHAPTER 3 / THE PROJECT MANAGER
The fundamental philosophy of staffing projects varies greatly in different cultures. In Latin America, for example, the compadre system leads a manager to give preference to relatives and friends when hiring.* U.S. managers feel that such practices are a major source of inefficiency in Latin American firms. In fact, there appears to be scant evidence that this is so. One private study of several firms in the U.S. and Latin American chemical industries indicates that the differences in management practices between U.S. and Latin American chemical firms were, in general, significantly less than the differences between the U.S. chemical firms and U.S. clothing manufacturers. A view almost uniformly held by others is that U.S. managers understand everything about technology and nothing about people (e.g., Smith et al., 1993). This view apparently originates in the desire to “get down to business,” while many foreign cultures—certainly Asian, Middle Eastern, Latin American, and southern European—value “getting to know you” as a precursor to the trust required to have satisfying business relationships. In many cultures, the manager is expected to take a personal interest in his or her subordinates’ lives, to pay calls on them, to take an interest in the successes of family members, and to hold a caring attitude. This flies in the face of the usual (bad) advice given to a U.S. manager to “Keep your nose out of your employees’ personal affairs.” On the other hand, it is clear that U.S. project managers are being urged to value cultural diversity in ways that are often not shared by their foreign cohorts. The following appeared in The Wall Street Journal.† Multiculturalism Stalls at the National Divide Valuing diversity is a uniquely American idea that may not travel well. Asked by AT&T to study race and gender issues in overseas work places, New York consultants Cornelius Grove and Willa Hallowell found “the values that give impetus to diversity issues here don’t necessarily exist abroad,” says Mr. Grove. Based on interviews with AT&T managers and executives, the two report that other societies view ethnic differences as an appropriate basis for assigning workplace roles. In Mexico, for example, an American manager shouldn’t expect to find indigenous Indians in management positions, which are controlled by European descendants. In Japan, it took an AT&T manager months to get Japanese managers to talk to key East Indian employees, Ms. Hallowell says. In the newsletter Cultural Diversity at Work, the consultants advise American managers abroad to value equality without judging cultural norms. (Wynter, 1994) Without attesting to the accuracy or fairness of its portrayal of Japanese culture and politics, we would strongly recommend that American project managers read Michael Crichton (1992) mystery thriller, Rising Sun. This book is a rich source of examples of the subtle and not-so-subtle ways in which cultures collide. It is an excellent illustration of the impact that a nation’s culture, its technology, language, institutions, and aesthetic values have on human behavior and communications.
Microcultures and the Project For some years, management theorists have been writing about “corporate culture.” We call these “microcultures” to differentiate them from the broader national or regional cultures
*We are quite aware that the compadre system is a system of networks of extended family members, and is far more complex than is implied in this simple example. †Reprinted by permission of The Wall Street Journal © 1994 Dow Jones & Company. Inc. All Rights Reserved Worldwide.
81721_Ch03.indd 132
9/16/08 5:00:18 PM
3.4
PROBLEMS OF CULTURAL DIFFERENCES
133
about which we have been writing. It is just as true, though less obvious, to observe that microcultures vary from industry to industry and from firm to firm just as cultures do from nation to nation. Sales techniques perfectly permissible in one industry, the wholesale automobile industry, for instance, would cause outrage and lawsuits in the business-machine industry. Promises have very different meanings in different areas of business. No one takes seriously the “promised” date of completion of a software application project, any more than a finishdate promise made by a home-remodeling contractor, or, for that matter, an author’s promise made to a publisher for the delivery of a manuscript on or before the deadline. The impact of interindustry, interfirm, and intrafirm microcultural diversity on the project manager is significant. Perhaps more than any other type of manager, the PM is dependent on commitments made by people, both inside and outside the parent organization, who owe little allegiance to the project, have little cause for loyalty to the PM, and over whom the PM has little or no de jure authority. Hence, the PM must know whose promises can be relied upon and whose cannot. The PM cannot even count on a simple acceptance of accountability (Dodson, 1998), or of the concepts of empowerment or a customer-oriented view of quality (de Macedo-Soares et al., 1995). In a major study of 50 transnational projects, Hauptman et al. (1996) found that the accomplishment of product development teams depended on the skill with which they handled two-way communication and problem solving, plus their willingness to deal with ambiguous and uncertain information. The team’s ability to deal with cultural differences in these areas was critical to success. On the positive side, Levinson et al. (1995) spell out several steps that allow “interorganizational learning” for groups that form international alliances (see also, Fedor et al., 1996).
Project Management in Practice Success at Energo by Integrating Two Diverse Cultures A major project involving some hundreds of millions of dollars was stymied due to the cultural differences between the owner/client, a state-run Middle East developer, and the contractor, a state-run European international designer and builder of industrial and construction projects. As can be imagined, the difference in the cultures is extreme and includes religions, the role of women in society, the difference in power between managers and workers, and the style of management itself. These differences were exacerbated by the conditions surrounding the project: an isolated desert, poor communication, extremely harsh living/ working conditions, and a highly unstable legal/political environment (taxes, regulations, restrictions, even client reorganizations) that was changing daily. The client and contractor came to realize that the two separate organizational systems created an interface, or boundary, between them that was almost impenetrable. They thus decided to try to integrate the
81721_Ch03.indd 133
two systems into one unified system (see Exhibit 1). This was done methodically, with a plan being drawn up, environmental impacts recognized, restructuring of the overall organization, designing the integration, and then implementing the design. As perhaps expected, neither side’s personnel were able to give up their perspective to see the larger picture. The project managers kept working on this issue, however, watched for problems, did a lot of management-by-walking-around, and gradually, the integration began to occur, gathering speed as it went. At project termination, when all costs and engineering changes were hammered out for final payment by tough external bargaining agents (rather than by principled negotiation, typically), no agreement could be reached. Instead, the project managers were brought back and allowed to terminate the project in their own fashion. They simply continued the integration process they had used earlier and quietly phased out the successful project.
9/16/08 5:00:19 PM
134
CHAPTER 3 / THE PROJECT MANAGER
EXHIBIT 1
Examples of Integrative Actions.
The Project Style Characteristics Physical Counterparts working together Appearance: (teamwork) Project-related pictures, charts, and schedules on office walls Myths and We are one team with two sides Stories: Both cultures are interesting Both sides’ interests should be satisfied We trust young managers Get the job done Separate yourself from the position and stick to the problem Both project managers are good, and committed to the project Ceremonies: Gather ideas and information from all over the project organization Frequent meetings at all levels Frequent social gatherings and festivities Management Plan, organize, and control with your Style: counterparts Make decisions No finger pointing for wrong decisions, learn the lesson Quickly execute the decision If you need help, don’t hesitate to refer to your boss
Actions Tour the site with counterpart project manager daily Make your office look like a “war room” Whenever possible, let the counterparts have a joint office Organize group visits to local historical sites
From time to time, attend lower-level joint project meetings Celebrate each key event completion
Ask counterparts for joint report on an issue Recognize high-performance managers monthly
Source: D. Z. Milosevic, “Case Study: Integrating the Owner’s and the Contractor’s Project Organization,” Project Management Journal, December 1990.
3.5
IMPACT OF INSTITUTIONAL ENVIRONMENTS* In general systems theory, the environment of a system is defined as everything outside the system that receives system outputs from it or delivers inputs to it. A culture’s institutions are a part of the environment for every project.
Socioeconomic Environment Of all the nations in which a project manager might find him- or herself, the need to interact with governments and representatives of governments is probably lower in the United States than almost anywhere else. This is true regardless of whether the government controls industry or industry controls the government in the country involved. On international projects, therefore, the PM (or the PM’s senior management) can expect to deal with bureaucracy at several different levels (i.e., local, regional, and national government functionaries). *Occasionally, particular sections will be shaded, meaning that they can be skipped without loss of continuity.
81721_Ch03.indd 134
9/16/08 5:00:19 PM
3.5
IMPACT OF INSTITUTIONAL ENVIRONMENTS
135
Popular movies and television to the contrary, the intentions of foreign governments and their officials are rarely evil. Foreign governments are usually devoted to ensuring that local citizens are well-treated by invading companies, that national treasures are not disturbed, that employment for their nationals is maximized, that some profits are reinvested in the host country, that safety regulations are not violated, and that other unintended exploitations are prevented. At times, rules and regulations may result from ancient traditions—no consumption of alcoholic beverages in Islamic nations, no consumption of pork products in Israel, and avoiding the “A-OK” hand-sign in several South American countries, though the latter is not a rule or regulation. The job description of any PM should include responsibility for acquiring a working knowledge of the culture of any country in which he or she is to conduct a project. As far as possible, the project should be conducted in such a way that host-country norms are honored. To do so, however, will often raise problems for management of the parent firm. An unwelcome truth is that the cultures of many countries will not offer a female PM the same level of respect shown a male PM. Thus, senior management is faced with the awkward choice of violating its own policy against sex discrimination or markedly increasing the risk of project failure. The same problem may also exist with the use of a Jewish PM in an Arab country, or an Armenian PM in Turkey.
Legal Environment The United States is, by far, the most litigious society on this planet. This does not mean that there are fewer disagreements in other societies, but rather that there is less recourse to courts of law, and, therefore, more recourse to negotiation as a means of resolving conflict. Martin (1993) examines the nature of the negotiation process in an international setting. He notes the impact that different cultures have on the process of negotiation, with special attention paid to the society’s institutional structure and patterns of communication. He concludes that the failure to understand the culture of a nation in which negotiations are taking place puts the ignorant party at a severe disadvantage. The same conclusion is obviously true for microcultures. Many authors have noted, as we have above, that trust plays an important role in business relationships (Gogal et al., 1988, for example). The impact of trust on project management, with its dependence on the ability and willingness of others to meet commitments, is clear. The importance of trust is also demonstrated by the critical role played by the compadre system in Latin America. Use of a general agreement with the extended family, as trusted suppliers to a project for example, is a substitute for the detailed and highly explicit contracts usually required for dealing with “arms-length” suppliers in the United States. Finally, it is sometimes forgotten that each nation’s laws are a product of its history. Law results from the attempt to reduce conflict by a regularized process. Because the conflicts in a country are, in part, a reflection of its unique culture, it follows that the laws of a nation will also be unique. For instance, in the United States there is a strong tradition condemning conspiracies to restrain trade that is effectuated through regulatory law, but law is constantly changing. Regulatory agencies have been politically restrained from exercising their powers by the simple expedient of tightening agency budgets. In recent years, certain types of collaboration between competitors have grown rapidly, even in the United States (Rosegger et al., 1990). In the United States, SEMATECH is a consortium of semiconductor manufacturers conducting joint research projects in the field; and the Automotive Composites Consortium is a collaborative group formed of Chrysler, Ford, and General Motors to study the use of plastic-processing technologies in automobile manufacture. These are merely two of many collaborative efforts allowed by the National Cooperative Research Act passed in 1984. European nations have also backed research consortia; for
81721_Ch03.indd 135
9/16/08 5:00:19 PM
136
CHAPTER 3 / THE PROJECT MANAGER
example, between 1961 and 1983, Japan had more than 60 research consortia, some with more than 40 members (Lynn et al., 1988). The move to collaborative projects has also been transnational. Airbus Industries, the British-French-German-Spanish venture, operating with financial support from its several governments, has achieved outstanding success in commercial aircraft development and production. Other examples are CFM International composed of GE (USA) and Snecma (France), and International Aero Engines composed of Pratt & Whitney (USA), Rolls Royce (UK), Japan Aero Engines, MTU (Germany), and Fiat (Italy). International projects exist in such great numbers because there is some resource required by the project that is not readily available in the host nation. Most commonly, that resource is technological knowledge.* Many firms invited into projects for their proprietary knowledge found, after the project was completed, that their knowledge was no longer proprietary. The world of information technology is replete with cases in which “ownership” of software developed through the joint efforts of two or more firms is strongly disputed. In the United States, such cases are usually settled in the courts. When two or more countries are involved, solution of the problem is not so simple. Patent laws differ from nation to nation, as do national attitudes about the sanctity of patents. As American firms increase their levels of outsourcing manufacturing projects, the problems of protecting proprietary knowledge will become increasingly difficult. The project manager and senior management should, if proprietary knowledge is valuable, make adequate provision for its protection. How to accomplish that is idiosyncratic to the case at hand. The North American Free Trade Agreement (NAFTA) affords protection of the intellectual property rights of firms to the three signers of the agreement, the United States, Canada, and Mexico. All areas of technology are patentable under NAFTA, and it is the first international agreement to include protection for trade secrets in addition to copyrights and patents (Chopra, 1993). The upshot of all this is that business laws, and laws that affect businesses, vary widely from nation to nation. For the project manager, there is no substitute for qualified legal assistance.
The Business Cycle as an Environment The project manager should be aware of the general level of business conditions in the nation hosting the project. While it is common for business cycles in economically developed countries generally to rise and fall together, they rarely match precisely. The depth of the cycle will be greater in one nation than another. The cycle will start or end in one country before it does in another. Occasionally, a cycle downturn may skip a country entirely. Therefore, local perceptions about the level of prosperity or recession will differ from region to region. These different perceptions will be reflected in positive or negative attitudes toward investment, and employment. The risks associated with a project will differ from country to country. Even notions about the proper timeframe for a project will be affected. In times of relatively high unemployment, many nations will erect institutional barriers in order to slow or prevent projects that might negatively affect their balances of trade. These barriers may take the form of mandated delays, failure to approve investments, unwillingness to allow repatriation of earnings, “inability” to locate necessary scarce resources (human and/or capital), severe “foot-dragging” on the part of local officials to grant required “permissions,” lack of needed capital equipment, and a great many other forms. Almost all of the above affected a large construction project in a Middle Eastern nation. The creativity
*Entry into a heretofore closed foreign market is another common reason for initiating international projects. This was certainly a major factor in the formation of both CFM International and International Aero Engines.
81721_Ch03.indd 136
9/16/08 5:00:20 PM
3.5
IMPACT OF INSTITUTIONAL ENVIRONMENTS
137
of bureaucrats (and we do not use that term in a pejorative sense) can be boundless when attempting to impede a project they see as undesirable or untimely. When questioned about the U.S. trade deficit with Japan, Robert Solow is reported to have responded that a deficit with any one nation was not important. He noted that he consistently ran a “trade deficit” with his barber—and presumably with his plumber and local grocer. While the Nobel laureate economist is undoubtedly correct about his barber et al., it should be noted that he runs large positive trade balances with his employer, MIT, and with his consulting clients. Further, while Professor Solow’s barber and grocer are unlikely customers for his services, Japan is clearly a potential customer for many goods and services produced in the United States. We would not for a moment argue with the notion of “comparative advantage,” but that economic concept assumes reasonable freedom for goods and services to cross national boundaries in both directions. That does not appear to be the case with the importation of foreign goods into Japan. Aho (1993) presents an interesting discussion of the American–Japanese trade conflict—which is a small conflict compared with the current American trade imbalance with China. Most nations handle such problems in very much the same way that private firms do. They practice commercial reciprocity. It is illegal, in the United States, to restrain trade by specifying reciprocity, but a great many firms manage to buy some required inputs from those customers that are able to supply them. Project managers can earn valuable goodwill by purchasing goods and services from vendors in the host country, and by employing qualified nationals. Indeed, in some cases the hiring of nationals is a condition placed on the project by the host organization. Above all, PMs should be sensitive to economic problems in the host country and be willing to adapt, as far as possible, to local commercial customs.
Technological Environment Though the state of a nation’s technology is not really an “institutional” environment, it is appropriate to mention the issue at this juncture. The ability to complete a project with success is often dependent on the PM’s ability to plan the project in such a way as to be compatible with the technology available in the host nation. This point is made in Graham et al. (1988) as well as in the following incident.
Project Management in Practice Project Management in Brazil during Unstable Times The government of Rio de Janeiro, needing a permanent facility for their annual festival, embarked on a unique project. They decided to build a combined school and carnival stadium to house the crowds that come to see the annual Lent parades and festivities for four days every March, just before Lent. The stadium had to seat 70,000 Samba fans, with the whole facility accommodating 200,000 overall for rock concerts and similar events. The rest of the year the structure would operate as a school for 4000 students. Since the annual cost of facilities for the festival was $10 million a year and the project would only cost $15 mil-
81721_Ch03.indd 137
lion, it would pay for itself very quickly. The project had to be done by the following Lent, only four and a half months later. The challenges of completing such a mammoth task in such a short time were severely exacerbated by the project environment of political uncertainty, rampant inflation, governmental bureaucracy, and local contractor politics. However, the extreme public pressure and strong desire by the project participants to complete the project on time led to a successful project completed not only on time but to high-quality standards and within budget. Moreover, the short time
9/16/08 5:00:20 PM
138
CHAPTER 3 / THE PROJECT MANAGER
span actually contributed to success in some ways, as described in the problems below.
Political Uncertainty The project began under a new governor of Brazil who wanted to show results in a short time. In general, new governments often make drastic changes in the economy —freezing assets, freezing prices, changing tax rates, changing the banking system, revaluing the currency (or even replacing it)—to correct the mistakes of previous administrations, set the economy straight, and fend off impending problems. Also, the priority of federal programs can often change abruptly because of domestic problems or dwindling funds. The result of such uncertainty is often a “wait and see” attitude in the entire economy, depressing all transactions and projects.
Rampant Inflation A particularly difficult aspect of economic uncertainty is in judging the “reasonableness” for what things should cost when the inflation spirals upward. Some system is needed to be able to check against price fixing by suppliers and contractors, as well as for simply knowing what items should cost. Thus, sophisticated indexing systems are used to help provide a cost index,
but these are imperfect, particularly for individual items that may not have inflated at the same rate as most other goods. Another complication is knowing when a payment is coming. At the inflation rate of 25 percent per month during this period, even a week’s delay in payment by the government can turn a profitable project into a major loss. Thus, another invoice is commonly sent for “escalation” between the time the first invoice was submitted and the time of payment by the customer. This invoice, of course, is also subject to inflation if payment is not forthcoming by the expected time!
Governmental Bureaucracy Governmental laws on bidding for public projects are extensive and place a heavy bureaucratic burden on all personnel. In addition, bureaucratic delays and forms, licenses, and other such procedural matters can delay and drive up the costs of any project indefinitely. In the case of this project, special simplified bidding and purchasing procedures were established by special government concession, and bureaucratic barriers were circumvented by access to the highest state and local officials for expediting on a case-by-case basis.
FPO
Brazil shuts down for four days for the Carnival.
81721_Ch03.indd 138
9/16/08 5:00:20 PM
3.5
IMPACT OF INSTITUTIONAL ENVIRONMENTS
139
FPO
Carnival parade in the new stadium in Rio de Janeiro.
Local Contractor Politics Even local politics with the contractors added problems in that they refused to participate, stating that the project deadline was impossible. Thus, two outof-state contractors were engaged to conduct the
81721_Ch03.indd 139
project, after which the local contractors reconsidered and thus obtained contracts for about 30 percent of the project work. Source: P. C. Dinsmore and J. O. Brizola, “PM Under Rampant Inflation,” PM Network, December 1993.
9/16/08 5:00:21 PM
140
CHAPTER 3 / THE PROJECT MANAGER
Operations research pioneer, Russell Ackoff, tells the story of being invited to India as a consultant to the government and being taken on a sight-seeing “inspection” tour in the nearby countryside. He observed several men dipping pails into a water-filled irrigation ditch on one side of the road and carrying the water across the road to a dry ditch on the other side. He then explained to his host, a government official, that if a pipe were installed under the road to connect the two sides, a simple gate could accomplish the water transfer. The gate could be operated by one person, thereby saving labor cost. The official listened politely and then asked, “And how will the men we replace support their families?” The technology used by any nation is largely a function of the relative cost (supply) of the factors of production—always modified by relevant tradition, policy, and law. In the next chapter, we will discuss “virtual” projects, which are transfunctional and/or geographically dispersed. Multicultural projects are “virtual” by definition. In recent years, communication problems have been greatly eased for virtual projects through email, the Internet, conference calls, and videoconferencing (Dodson, 1998). While overused email may be a curse for project managers, it is also a blessing when frequent communication with other organizations is required. Of course, these technologies do not relieve the PM from the demands of cultural sensitivity. Though it is not electronic, the technology of negotiation is critical for the PM with a multicultural project. Dodson writes: Project management is ultimately expectation management. Effective management of expectations requires negotiation skills that eclipse more quantitative, “metrical” skills. Projects are only as successful as the degree to which the project manager is an effective negotiator. . . . For at least three-quarters of the world’s population, relationship comes above all else: above time, above budget, above specification. The savvy project manager knows this and knows that he or she will always be balancing, for instance, the needs of the Japanese for meeting deadlines against the Latin American tendency toward a more relaxed approach to dealing with others (Dodson, 1998). We will have much more to say about negotiation in the next chapter.
3.6
MULTICULTURAL COMMUNICATIONS AND MANAGERIAL BEHAVIOR* The importance of language cannot be overstated. Almost every writer on the subject of managing international projects, or of managing any business in another country, advises the manager to learn the language of the host nation. It is usually not necessary (though it is always helpful) for a project manager to be fluent in the language of the host nation. When precise communication is required, a skilled translator can be used. It is, however, usually pleasing to the citizens of the host nation when visiting PMs speak their language, even haltingly. Language is a complex composite of words, signs, symbols, movements and positions of the body, pictures, sounds, equations, and objects—the things with which we communicate with one another. The ways in which we use the elements of communication, the ways in which we send and receive messages, are integral parts of the communication. The media are a part of the message, to paraphrase Marshall McLuhan’s famous statement. Even the source and destination of the message may alter its meaning. Identical words may carry quite different meanings depending on the context within which the words are spoken or on who delivers the words to whom. (Consider the words, “I’ll give you a ring” spoken by a young man to a young lady at the end of a date.) *Occasionally, particular sections will be shaded, meaning that they can be skipped without loss of continuity.
81721_Ch03.indd 140
9/16/08 5:00:21 PM
3.6
MULTICULTURAL COMMUNICATIONS AND MANAGERIAL BEHAVIOR
141
Because the communication cannot be separated from the communicator, the managerial and personal behaviors of the project manager are discussed along with the more commonly mentioned aspects of the communication process.
Structure and Style of Communications Some years ago the American steel industry supported a training program for young engineers educated in India. The program was one of several responses from the United States to the Soviet Union’s gift of steel production plants and equipment to India. Based on the (accurate) assumption that American management and production methods in the steel business were significantly better than the USSR’s, a project was developed to train the engineers on operations by having them work as first-line supervisors in steel mills in Cleveland and Pittsburgh. At the same time, they attended universities in those cities for academic training in relevant American business practices and techniques. Several problems arose. All the engineers were reasonably fluent in written and spoken English, so they received training in the in-plant communications methods employed by American steel companies. It was several months later before an American academic (who had not been involved in planning the program) pointed out that only 17 percent of the workers in an Indian steel mill could read. This obviated much of the elaborate communication system the engineers were being trained to use, most of which depended heavily on written memoranda and instructions. It is appropriate to wonder why the Indian engineers did not make this fact known to those teaching the communications courses. The reason is, in Asiatic nations, teachers (and senior officials in general) are held in very high regard. It would be impolite, almost unthinkable, to question or correct them. Cultural differences caused another problem. In the United States, it is common to train supervisors in the steel industry (and also in other industries) by giving them some “hands-on” experience in production methods. The young Indians felt that it was beneath them to pick up and use a shovel while working on the blast furnace floor. To convince the engineers to continue in this aspect of their training, without resentment, required an on-site demonstration by a very senior American executive. These types of multicultural problems are ubiquitous on international projects. In the United States, delegation is a preferred managerial style. When authority is diffused, information moves to the manager from the delegatees. Workers report to supervisors who, in turn, report to middle and senior managers. In cultures where authority is highly centralized, it becomes the project manager’s responsibility to seek out information (Smith et al., 1993). At several different points in this book, we have urged the PM never to let the boss be surprised. This is a fundamental tenet of our approach to project management. The manager of an international project cannot count on being voluntarily informed of problems and potential problems by his or her subordinates. The Gogal et al. study (1988) and the smallsample survey of Graham et al. (1988) both examine project management as it currently exists in China. They did not examine multicultural projects, but studied projects conducted by Chinese managers and workers in China. They are, nonetheless, instructive. It is clear that management in China is authoritarian, and that the need to negotiate—largely with the state—is just as, if not more, important than it is in the projects of any other culture. The role of negotiation will not decrease for multicultural projects involving China. It will be extended.
Managerial and Personal Behavior We have already noted the difference in the bottom-up flow of information in American projects and the top-down flow in countries where the management style is authoritarian.
81721_Ch03.indd 141
9/16/08 5:00:22 PM
142
CHAPTER 3 / THE PROJECT MANAGER
There are other cross-cultural differences that create problems for a project manager whose experience is restricted to the United States. In a fascinating paper, Grinbergs et al. (1993) compare the managerial characteristics of Swiss and American managers/engineers of the same general age, education, and salary levels, all of whom were working on software projects. Several of these comparisons illustrate culturally based differences in managerial and interpersonal style. The study revealed that Swiss managers were “much more formal” with each other than Americans. This demonstrates the interaction of interpersonal style and language. Many languages have both formal and informal modes of addressing other people (e.g., the formal German “Sie” and French “vous” compared to the informal “du” and “tu”). If an American in Germany uses “du” to a German counterpart, it will certainly be understood, but it may also carry overtones of rudeness. Because we have emphasized planning so strongly throughout this book, we find the differences in the Swiss and American approaches to planning of special interest. The U.S. respondents did not consider thorough planning and a long-term strategy as absolute prerequisites for beginning a project. . . . Though promptness is highly valued in both countries, long-term strategy is considered much more important in the Swiss company. (Grinbergs et al., 1993, p. 24) In addition to these areas, the Swiss and Americans differed in a number of other ways of import to the PM. The Swiss showed a stronger work ethic, were more resistant to change, were more risk averse, more accepting of bureaucracy, and more focused on quality. The Americans were more collegial, more willing to experiment and innovate, had a shorter time horizon, and communicated more openly. When conducting a project in an Asian nation, an American PM should exercise considerable care while criticizing the work of indigenous subordinates. Loss of face is a serious problem in Oriental cultures. In communist states such as China, the pseudo-egalitarianism* may make criticism completely unacceptable (cf. Gogal et al., 1988 and elsewhere). In a society with highly structured social classes, it is also difficult to practice participative management. There is, apparently, a built-in assumption that the more educated, higher-class manager’s authority will be denigrated by using a participative style. (It is interesting to note that one does not have to leave the United States in order to see this culturally based trait in action. In many U.S. firms, management is quite authoritarian and the social gulf between manager and worker is as wide as in much more class-conscious nations.) The more structured a country’s social system, the less direct managerial communication tends to be. In North America, it is common for senior managers to interact with first-line supervisors, and even with blue- and white-collar workers. Communication flows easily across functional lines. In most other areas of the world, the communication will be more indirect, and will tend to follow the lines of authority established on the organizational chart. Dinsmore et al. (1993) list five factors that they contend require special consideration by the PM heading a multicultural project. We have already noted some of these factors (e.g., the importance of language and culture, the need to deal with the politics and politicians in the host nation, the fact that the PM may have to use indigenous staff members, the possibility of input supply and technology problems, and the need to obey local laws and
*We refer to this egalitarianism as “pseudo” because the actual management style is highly authoritarian. Recall George Orwell’s Animal Farm in which it was noted that all animals were equal, but some were more equal than others.
81721_Ch03.indd 142
9/16/08 5:00:22 PM
3.6
MULTICULTURAL COMMUNICATIONS AND MANAGERIAL BEHAVIOR
143
customs). In addition, they note two other matters that may cause serious problems for the PM. First, there are additional risk factors such as kidnapping, disease, and faulty medical care. Of course, in many countries, project workers will face less risk from crime than in the United States as well as easier access to medical care. Second, Dinsmore et al. (1993, p. 458) point out that the PM may have to provide for the physical and psychological needs of people who are transferred to the host nation and must live in a “strange land with different customs and way of life.” They refer to this as the “expatriate way of life.” The PM is warned, however, not to go too far in accommodating to foreign cultures. “Going native” is not helpful. An Austrian economist of our acquaintance remarked, “American managers who come over here and wear lederhosen and funny hats are laughable. No one takes them seriously.”
Final Comments on Multicultural Projects The project manager is ill-advised to take on an international project without adequate preparation in the culture and language of the host nation. Lack of preparation is apt to cause cultural shock which results in frustration, usually followed by withdrawal. It is a no-win situation. If there are no resources inside the organization to prepare those moving into a different culture, outside consultants with appropriate knowledge and teaching skills are needed. (Note: a current employee of the firm who happens to be of the right nationality is not a suitable resource for the training.) Lessons in the foreign language are mandatory, even if the language training does not extend to technical language.* In most cases, the willingness to speak in the host nation’s tongue on social occasions and for routine business—if not for technical discussions—will be appreciated by the hosts and earn goodwill from the indigenous members of the project team. Finally, research has shown the importance of the psychosocial aspect of service on project teams. “In practical terms, this finding suggests that it is important for project team members to enjoy working with other team members, and to perceive the project as a valuable way to spend their time” (Pinto et al., 1991, p. 17). This is doubly important for multicultural projects, particularly for expatriate team members. They are away from home and depend, for the most part, on their national cohorts to meet psychosocial needs. Given this cultural isolation, the project becomes a critical source of both psychological and social payoffs, and the PM, with a strong tendency to focus only on task outcomes, should make sure that these other needs are met. Because all people invariably seem to view the values of other cultures in terms of their own, the process of understanding and working comfortably in another culture requires great effort. But it seems to us that most Americans underestimate their own abilities to manage international projects with skill and sensitivity. Americans seem to feel that being able to speak more than one language, as citizens of many other countries do, implies acceptance and sensitivity to another culture. It takes no more than a quick glance at the Balkans or the Middle East to know that the implication is untrue. If a PM from Toronto can manage a project in Quebec, if a PM from Boston can manage a project in Albuquerque, it is probable that an American Southern Baptist can function in Israel or a Tex-Mex from Corpus Christi can be effective in Berlin. Multicultural management does take effort, but it is do-able.
*It is interesting to note that English comes closest of any language to being the universal tongue for science, technology, and business. The underlying reason for this is probably the preeminence of American higher education in these fields. This generalization does not, however, apply to China—and possibly not to Paris.
81721_Ch03.indd 143
9/16/08 5:00:22 PM
144
CHAPTER 3 / THE PROJECT MANAGER
SUMMARY This chapter addressed the subject of the PM. The PM’s role in the organization and responsibilities to both the organization and the project team were discussed first. Common PM career paths were also described. Next, the unique demands typically placed on project managers were detailed and the task of selecting the PM was addressed. Last, the issue of culture and its effect on project communication and success was discussed. The following specific points were made in the chapter. Two factors crucial to the success of the project are its support by top management and the existence of a problem orientation, rather than discipline orientation, within the team members. Compared to a functional manager, a PM is a generalist rather than a specialist, a synthesizer rather than an analyst, and a facilitator rather than a supervisor. The PM has responsibilities to the parent organization, the project itself, and the project team. The unique demands on a PM concern seven areas:
• • • • • • •
Acquiring adequate physical resources Acquiring and motivating personnel Dealing with obstacles Making goal trade-offs Maintaining a balanced outlook in the team Communicating with all parties Negotiating
The most common characteristics of effective project team members are:
• •
High-quality technical skills Political sensitivity
• •
Strong problem orientation High self-esteem
To handle the variety of project demands effectively, the PM must understand the basic goals of the project, have the support of top management, build and maintain a solid information network, and remain flexible about as many project aspects as possible. The best person to select as PM is the one who will get the job done. Valuable skills for the PM are technical and administrative credibility, political sensitivity, and an ability to get others to commit to the project, a skill otherwise known as leadership. Some important points concerning the impact of culture on project management are:
• • • •
Cultural elements refer to the way of life for any group of people and include technology, institutions, language, and art. The project environment includes economic, political, legal, and sociotechnical aspects. Examples of problematic cultural issues include the group’s perception of time and the manner of staffing projects. Language is a particularly critical aspect of culture for the project.
In the next chapter we consider the task of negotiating for the resources to implement the project plan and WBS, which will then complete our treatment of Part I: Project Initiation.
GLOSSARY Analytic Approach Breaking problems into their constituent parts to understand the parts better and thereby solve the problem. Benefit-Cost A ratio to evaluate a proposed course of action. Champion A person who spearheads an idea or action and “sells” it throughout the organization. Contingency Plan An alternative for action if the expected result fails to materialize. Culture The way of life of any group of people.
81721_Ch03.indd 144
Discipline An area of expertise. Environment Everything outside the system that delivers inputs or receives outputs from the system. Facilitator A person who helps people overcome problems, either with technical issues or with other people. Functional One of the standard organization disciplines such as finance, marketing, accounting, or operations. Microculture The “corporate culture” within the organization, or even project.
9/16/08 5:00:23 PM
QUESTIONS
Systems Approach A wide-ranging, synthesizing method for addressing problems that considers multiple and interacting relationships. Commonly contrasted with the analytic approach. Technological Having to do with the methods and techniques for doing something.
145
Trade-Off Allowing one aspect to get worse in return for another aspect getting better. Tweed Coat Management The concept that highly educated people such as engineers require a special type of management.
QUESTIONS Material Review Questions
1. How does the project act as a stepping-stone for the project manager’s career? 2. Name the categories of skills that should be considered in the selection of a project manager. 3. Discuss the PM’s responsibilities toward the project team members. 4. What are the major differences between functional managers and project managers? 5. What are some of the essential characteristics of effective project team members? 6. What is the most important selection characteristic of a project manager?
7. What project goals are most important during the project life cycle stages? 8. Why must project management team members have good technical skills? 9. Describe each of the four elements of culture. 10. Identify some important types of project environments. 11. Contrast culture, microculture, and multiculture. 12. In what ways is language crucial in project management? 13. Identify the five multicultural factors requiring special consideration.
Class Discussion Questions
14. Can you think of several ways to assure “breadth of communication” in a project? Do you think “socialization” off the job helps or hinders? 15. Contrast the prime law for projects, “Never surprise the boss,” with the corporate adage “Bad news never travels up.” 16. How does a project manager, in some cases, work like a politician? 17. What are some of the conflicts that are bound to occur between parties that have legitimate interests in the project? 18. Project managers must be generalists rather than specialists. Yet, team members need to have more specialized, technical skills. Can a generalist manage a team of specialists effectively? 19. Why do you think cost drops in importance as an objective right after the formation stage? 20. Why is it more difficult to keep the project on its time and cost schedules the later the project gets in its life cycle?
81721_Ch03.indd 145
21. Suppose you have a talented scientist temporarily working for you on a client contract who is due to be transferred back to her regular job. Although you could do without her efforts at this point of the contract, you happen to know that she will be laid off for lack of work at her regular job and her personal financial situation is dire. You feel it is important that her talent be kept on the company payroll, although keeping her on the contract will increase expenses unnecessarily. Is the transfer decision a business decision or an ethical one? Why? If the decision were yours to make, what would you decide? 22. Contrast cultural differences with environmental differences. Isn’t the culture part of the environment? 23. How is communication through art different than through language? 24. What should a firm do when an accepted practice in a foreign country is illegal in its own country? 25. If employing people to use pails to move water helps the economy, why not use spoons instead and thus hire even more people? How should the official have been answered?
9/16/08 5:00:23 PM
146
CHAPTER 3 / THE PROJECT MANAGER
Questions for Project Management in Practice The Project Management Career Path at AT&T
Success at Energo by Integrating Two Diverse Cultures
26. How difficult is it to change a culture where project management is perceived as of low status and something to get out of to one where project management is respected? How would you approach such a task? 27. What was the problem with the mentality of admiring heroic rescues of projects in trouble? 28. Compare the skills sought for project managers among BCS’s Leadership Continuity Plan with those listed in the chapter.
32. What was the key to solving this dilemma? 33. How did the two PMs implement their strategy? 34. What actions in Exhibit 1 might have been key to making this project a success?
The Wreckmaster at a New York Subway Accident
29. In what phase of the disaster plan does providing for alternate services probably occur? In what phase does bringing new equipment and supplies occur? 30. How much preplanning could be done for wrecks such as these in terms of disaster teams, command center locations, task sequencing, and so on? 31. What experience credentials does NYCTA look for in appointing wreckmasters?
Project Management in Brazil During Unstable Times
35. What key background factors led to making this project a success? 36. How does “escalation” work? Is escalation allowed in the escalation? 37. How were bureaucracy and local contractor politics avoided? A Surprise “Director of Storm Logistics” for Katrina
38. Why do you think Wilson was appointed Director? 39. What would have been the first set of tasks Wilson would have considered after requesting help?
INCIDENTS FOR DISCUSSION Smithson Company
Keith Smithson is the CEO of the Smithson Company, a privately owned, medium-size computer services company. The company is 20 years old and, until recently, had experienced rapid growth. Mr. Smithson believes that the company’s recent problems are closely related to the depressed Asian economy. Brianna Smatters was hired as the director of corporate planning at Smithson six months ago. After reviewing the performance and financial statements of Smithson for the last few years, Ms. Smatters has come to the conclusion that the economic conditions are not the real problem, but rather exacerbate the real problems. She believes that in this Internet era, Smithson Company’s services are becoming obsolete but the department heads have not been able to cooperate effectively in reacting to information technology threats and opportunities. She believes that the strong functional organization impedes the kinds of action required to remedy the situation. Accordingly, she has recommended that Mr. Smithson create a new position, manager of special operations, to promote and use project management techniques. The new manager would handle several critical projects in the role of project manager. Mr. Smithson is cool to the idea. He believes that his functional departments are managed by capable professional
81721_Ch03.indd 146
people. Why can’t these high-level managers work together more efficiently? Perhaps a good approach would be for him to give the group some direction (what to do, when to do it, who should do it) and then put the functional manager most closely related to the problems in charge of the group. He assumes that the little push from him (Smithson) as just described would be enough to “get the project rolling.” Questions: After this explanation Ms. Smatters is more convinced than ever that a separate, nonfunctional project manager is required. Is she right? If you were Smatters, how would you sell Mr. Smithson on the idea? If a new position is created, what other changes should be made? Newcastle Nursing and Rehabilitation Residence
The Newcastle Nursing and Rehabilitation Residence (NNRR) is a 135-bed skilled nursing home. NNRR is considering converting a 36-bed wing of their main building for use by patients who require ventilator-assisted breathing. The rooms will be slightly smaller than optimum for ventilator patients, but just exceed the recommended minimum square footage. Enlarging the rooms is not an economic option. In the main, the conversion will require the addition of electrical wiring to power oxygen-concentrators that extract 95 percent pure oxygen from room air,
9/16/08 5:00:23 PM
CONTINUING INTEGRATIVE CLASS PROJECT
portable ventilators that supply the oxygen under pressure to assist breathing, and small, motor-driven suction devices to remove excess mucus from a patient’s airway. These rooms must also be connected to an emergency generator that automatically starts and supplies electrical current if the main electrical supply fails. Finally, pressure sensors must be connected from each ventilator unit to a sound device located in the hallway of the ventilator wing. These units sound a strident signal and cause a hallway light to flash if there is a sharp drop in the airway pressure of a ventilator patient. In addition to these power needs associated with ventilator patients, power outlets are also needed for several machines that dispense tube feedings of medicines and nutrition, and for IVs, radios, and similar entertainment devices. Each bed itself needs a power outlet as does the air mattress pump. Because all rooms are double occupancy, each room needs two full sets of the outlets. The equipment noted above is normally plugged in at all times when the patient is in his or her room. Otherwisewell patients, however, are moved daily into a “day room” equipped with a large screen TV and chairs and tables. Most patients must be moved with their portable ventilators and concentrators or bottled oxygen. Patients who are well enough, eat their meals in the day room and socialize with each other and with visitors. (The socialization is a quiet process because a large majority of the patients breathe through a tube inserted in their trachea and are unable to speak aloud.) The Senior Administrator, Steve Murphy, has decided to set up the conversion process as a project. Mr. Murphy is considering the choice of a project manager. He is trained in business, not hospital design. He feels a Registered Nurse or Licensed Practical Nurse might be an appropriate PM. He also feels that a Respiratory Therapist (RT) might be a
147
good choice because RTs are responsible for using the major electrical equipment. Finally, he thinks that the installation and placing of all the outlets might be better handled by a representative of the electrical contractor who must carry out the major part of the room conversion. Questions: Who should Mr. Murphy choose? Defend your choice. International Microcircuits, Inc.
Megan Bedding, vice-president of sales for International Microcircuits, Inc. (IM), was delighted when IM was one of the few firms invited to enter a bid to supply a large industrial customer with their major product in a small foreign country. However, her top salesperson for that region had just called and informed her of certain “expectations” of doing business in the country: 1. Local materials representing at least 50 percent of the product’s value must be purchased in reciprocity. 2. The local politicians will expect continual significant donations to their party. 3. Industrial customers normally receive a 40 percent “rebate” (kickback) when they purchase goods from suppliers such as IM. (IM’s profit margin is only 20 percent.) With this new information, Megan was unsure about changing or proceeding with the bid. If it was withdrawn, a lot of effort would be wasted as well as a chance to get a foothold in the international market. But if she proceeded, how could these expectations be met in a legal and ethical way? Question: Devise a solution that addresses Megan’s concerns.
CONTINUING INTEGRATIVE CLASS PROJECT The task for the class now is to select a project manager. But heed the advice given in the chapter that the best PM is the one “who can get the job done,” not the one who is just “available.” This is a particularly dangerous pitfall for a class project where everyone is busy and no one had expected to be called upon to lead a major project. And resist the temptation of naming two people as co-PMs—that rarely works unless these people have a history of working well together in previous projects. With two PMs, no one knows who is responsible for what and tasks may fall through the cracks. In theory, the work of the PM should be no more, and possibly less, than the other members of the class, especially if the project is well organized and
81721_Ch03.indd 147
well run. The main responsibilities of the PM (and perhaps in concert with subteam heads) are to organize the project, schedule the tasks, and stay on top of progress. However, if problems, or maybe personality feuds, crop up, the PM may find these are taking a lot more time than was expected. When a PM is finally selected, it is important for the class, and especially any subteam heads, if such exist, to give full allegiance to the PM in getting the work done and upholding the workload they agreed to handle. Bear in mind also that there will probably be one or more people in the class who will need to do more than their fair share of the work because of unexpected problems that crop up during the term.
9/16/08 5:00:24 PM
148
CHAPTER 3 / THE PROJECT MANAGER
BIBLIOGRAPHY Aho, C. M. “America and the Pacific Century: Trade Conflict or Cooperation?” IEEE Engineering Management Review, Winter 1993. Barry, V. Moral Issues in Business. Belmont, CA: Wadsworth, 1979. Beer, S. Diagnosing the System for Organizations. New York: Wiley, 1985. Blanchard, K., and N. V. Peale. The Power of Ethical Management. New York: Morrow, 1988. Boulding, K. E. “General Systems Theory—The Skeleton of Science.” Management Science, Vol. 2, No. 3, April 1956. Chopra, K. J. “NAFTA: Implications for Project Management.” PM Network, November 1993. Churchman, C. W., The Systems Approach, rev. ed. New York: Delta, 1979. Crichton, M. Rising Sun. New York: Knopf, 1992. de Macedo-Soares, T. D. L.v. A., and D. C. Lucas. “Empowerment and Total Quality: Comparing Research Findings in the USA and Brazil.” Technovation, October 1995. Dinsmore, P.C., and M.M.B. Codas. “Challenges in Managing International Projects.” In P. C. Dinsmore, ed., The AMA Handbook of Project Management. New York: AMACOM, 1993. Dodson, W. R. “Virtually International.” PM Network, April 1998. Fedor, K. J., and W. B. Werther, Jr. “The Fourth Dimension: Creating Culturally Responsive International Alliances.” IEEE Engineering Management Review, Fall 1997, as reprinted from Organizational Dynamics, Autumn 1996. Ford, R. C., and F. S. McLaughlin. “Successful Project Teams: A Study of MIS Managers.” IEEE Transactions on Engineering Management, November 1992. Foti, R. “Today’s Project Manager.” PM Network, April 2003. Gagnon, R. J. An Exploratory Analysis of the Relevant Cost Structure of Internal and External Engineering Consulting, Ph.D. dissertation. Cincinnati: University of Cincinnati, 1982. Gagnon, R. J., and S. J. Mantel, Jr. “Strategies and Performance Improvement for Computer-Assisted Design.” IEEE Transactions on Engineering Management, November 1987. Gogal, H. C., and L. R. Ireland. “Project Management: Meeting China’s Challenge.” Project Management Journal, February 1988.
81721_Ch03.indd 148
Grant, K. P., C. R. Baumgardener, and G. S. Stone. “The Perceived Importance of Technical Competence to Project Managers in the Defense Acquisition Community.” IEEE Transactions on Engineering Management, February 1997. Grinbergs, A., and A. H. Rubenstein. “Software Engineering Management: A Comparison of Methods in Switzerland and the United States.” IEEE Transactions on Engineering Management, February 1993. Green, S. G. “Top Management Support of R&D Projects: A Strategic Leadership Perspective.” IEEE Transactions on Engineering Management, August 1995. Hauptman, O., and K. K. Hirji. “The Influence of Process Concurrency on Project Outcomes in Product Development: An Empirical Study of Cross-Functional Teams.” IEEE Transactions on Engineering Management, May 1996. Herzberg, F. H. “One More Time: How Do You Motivate Employees?” Harvard Business Review, January– February 1968. Hughes, T. P. Rescuing Prometheus. New York, Pantheon, 1998. Ireland, L. R., W. J. Pike, and J. L. Schrock. “Ethics for Project Managers.” Proceedings of the 1982 PMI Seminar/Symposium on Project Management, Toronto, Ontario, Canada. Jiang, J. J., G. Klein, and S. Margulis. “Important Behavioral Skills for IS Project Managers: The Judgments of Experienced IS Professionals.” Project Management Journal, March 1998. Kalu, T. C. U. “A Framework for the Management of Projects in Complex Organizations.” IEEE Transactions on Engineering Management, May 1993. Kloppenborg, T J., and S. J. Mantel, Jr. “Trade-offs on Projects: They May Not Be What You Think.” Project Management Journal, March 1990. Kotter, J. P. “What Effective General Managers Really Do.” Harvard Business Review, November–December 1982. Levinson, N. S., and M. Asahi. “Cross-National Alliances and Interorganizational Learning.” IEEE Engineering Management Review, Fall 1997, as reprinted from Organizational Dynamics, Autumn 1995. Lynn, L. H., and T. J. McKeown. Organizing Business: Trade Associations in America and Japan. Washington, D.C.: American Enterprise Institute for Public Policy Research, 1988. Martin, M. D. “The Negotiation Differential for International Project Management.” In P. C. Dinsmore, ed.,
9/16/08 5:00:24 PM
BIBLIOGRAPHY
The AMA Handbook of Project Management. New York: AMACOM, 1993. Matson, E. “Congratulations, You’re Promoted” and “Project: You.” Fast Company, as reprinted in Engineering Management Review, Winter 1998. Medcof, J. W., J. Hauschildt, and G. Keim. “Realistic Criteria for Project Manager Selection and Development.” Project Management Journal, September 2000. Mintzberg, H. The Nature of Managerial Work. New York: Harper & Row, 1973. Nixon, M. A. “Legal Lights: Business Ethics.” Project Management Journal, September 1987. Norrie, J. and D. H. T. Walker. “A Balanced Scorecard Approach to Project Management Leadership.” Project Management Journal, December 2004. Pastin, M. The Hard Problems of Management. San Francisco: Jossey-Bass, 1986. Patterson, N. “Selecting Project Managers: An Integrated List of Predictors.” Project Management Journal, June 1991. Phillips, R. C. “How to Build a Low-Cost Black Box: Practical Tips for Owners.” PM Network, October 1995. Pill, J. Technical Management and Control of Large Scale Urban Studies: A Comparative Analysis of Two Cases, Ph.D. dissertation. Cleveland: Case Western Reserve University, 1971. Pinto, J. K., and S. J. Mantel, Jr. “The Causes of Project Failure.” IEEE Transactions on Engineering Management, November 1990. Pinto, M. B., and J. K. Pinto. “Determinants of CrossFunctional Cooperation in the Project Implementation Process.” Project Management Journal, June 1991. Pinto, J. K., and D. P. Slevin. “The Project Champion: Key to Implementation Success.” Project Management Journal, December 1989. Project Management Institute. “Slow Motion,” PM Network, April 2005, p. 1. Robb, D. J. “Ethics in Project Management: Issues, Practice, and Motive.” PM Network, December 1996.
81721_Ch03.indd 149
149
Rosegger, G., and S. J. Mantel, Jr. “Competitors as Consultants: Collaboration and Technological Advance.” In J. Allesch, ed., Consulting in Innovation: Practice, Methods, Perspectives. Amsterdam: Elsevier, 1990. Sahlin, J. P. “How Much Technical Training Does a Project Manager Need?” PM Network, May 1998. Schaefer, A. G., and A. J. Zaller. “The Ethics Audit for Nonprofit Organizations.” PM Network, March 1998. Scott, S. G., and R. A. Bruce. “Following the Leader in R&D: The Joint Effect of Subordinate Problem-Solving Style and Leader-Member Relations on Innovative Behavior.” IEEE Transactions on Engineering Management, February 1998. Shenhar, A. J. “From Theory to Practice: Toward a Typology of Project-Management Styles.” IEEE Transactions on Engineering Management, February 1998. Slevin, D. P. The Whole Manager. New York: AMACOM, 1989. Smith, L. A., and J. Haar. “Managing International Projects.” In P. C. Dinsmore, ed., The AMA Handbook of Project Management. New York: AMACOM, 1993. Souder, W. E. “Autonomy, Gratification, and R & D Output: A Small-Sample Field Study.” Management Science, April 1974. Tannenbaum, R., and F. Massarick. “Leadership: A Frame of Reference.” Management Science, October 1957. The World Book. Chicago: Field Enterprises, 1997. van Gigch, J. P. Applied General Systems Theory, 2nd ed. New York: Harper & Row, 1978. Whitten, N. “Attributes of the Successful Project Leader.” PM Network, June 1996. Wynter, L. E. “Business and Race.” Wall Street Journal, January 1, 1994. Zimmerer, T. W., and M. M. Yasin. “A Leadership Profile of American Project Managers.” Project Management Journal, March 1998.
9/16/08 5:00:25 PM
150
CHAPTER 3 / THE PROJECT MANAGER
The following case involves a project manager who stumbles into a public project somewhat by accident. The project starts out as one thing and evolves into something else. Acquiring sufficient resources for the project is a major difficulty, and competition may be troublesome also. A consultant is hired who conducts two surveys to gather more information and makes recommendations based on the survey evidence and experience. The case illustrates the varied skills necessary to be a successful project manager and the myriad opportunities/difficulties some projects entail.
C
A
S
E
THE NATIONAL JAZZ HALL OF FAME* Cornelis A. de Kluyver, J. Giuliano, J. Milford, and B. Cauthen Mr. Robert Rutland, founder of the National Jazz Hall of Fame, poured himself another drink as he listened to some old jazz recordings and thought about the decisions facing him. Established about one year ago, the National Jazz Hall of Fame (NJHF) had achieved moderate success locally but had not yet attracted national recognition. Mr. Rutland wondered how much support existed nationally, what services the NJHF should provide and for whom, and what the NJHF should charge for those services. He also thought about other jazz halls of fame and their implications for the NHJF. Although he had engaged an independent consultant to find some answers, the questions still lingered. Jazz The word “jazz,” according to Dr. David Pharies, a linguistics scholar at the University of Florida, originally meant copulation, but later identified a certain type of music. Amid the march of funeral bands, jazz music began in New Orleans in the early 1900s by combining Black spirituals, African rhythms, and Cajun music; Dixieland jazz became the sound of New Orleans. Jazz traveled from New Orleans, a major trade center, on river boats and ships and reached St. Louis, Kansas City, Memphis, Chicago, and New York. Musicians in these cities developed local styles of jazz, all of which remained highly improvisational, personal, and rhythmically complex. Over the years, different sounds emerged—swing, big band, be bop, fusion, and others—indicating the fluidity and diversity of jazz. Jazz artists developed their own styles and competed with one another for recognition of their musical ability and compositions. Such diversity denied jazz a simple definition, and *Copyright © 1984 by the Darden Graduate Business School Foundation, Charlottesville, VA.
81721_Ch03.indd 150
opinions still differed sharply on what exactly jazz was. It was difficult, however, to dispute Louis Armstrong’s statement that “if you have to ask what jazz is, you’ll never know.” Origins of the National Jazz Hall of Fame Mr. Rutland, a history professor at the University of Virginia, which is in Charlottesville, discovered that renovation plans for the city’s historic district excluded the Paramount Theatre, a local landmark. The Paramount was constructed in the 1930s and used as a performance center and later as a movie theatre. It was closed in the 1970s and now was in danger of becoming dilapidated. Alarmed by the apparent lack of interest in saving the Paramount, Mr. Rutland began to look for opportunities to restore and eventually use the theatre. The most attractive option to him was to establish a jazz hall of fame that would use the theatre as a museum and performance center; this would capitalize on the theatre’s name, because the Paramount Theatre in New York City was a prominent jazz hall during the 1930s and 1940s. Mr. Rutland mentioned his idea—saving the theatre by establishing a jazz hall of fame—to several friends in Charlottesville. They shared his enthusiasm, and together they incorporated the National Jazz Hall of Fame and formed the board of directors in early 1983. A few prominent jazz musicians, such as Benny Goodman and Chick Corea, joined the NJHF National Advisory Board. The purpose of the NJHF was to establish and maintain a museum, archives, and concert center in Charlottesville to sponsor jazz festivals, workshops, and scholarships, and to promote other activities remembering great jazz artists, serving jazz enthusiasts, and educating the public on the importance of jazz in American culture and history.
9/16/08 5:00:25 PM
CASE
The First Year’s Efforts Immediately after incorporation, the directors began their search for funds to save the Paramount and to establish the NJHF, and soon encountered two difficulties. Philanthropic organizations refused to make grants because no one on the board of directors had experience in a project like the NJHF. In addition, government agencies such as the National Endowment for the Arts and the National Endowment for the Humanities considered only organizations in operation for at least two years. However, some small contributions came from jazz enthusiasts who had read stories about the NJHF in Billboard, a music industry magazine, and in the Charlottesville and Richmond newspapers. By mid-1983, the board of directors discovered that to save the Paramount at least $600,000 would be needed, a sum too large for them to consider. They decided, however, that out of their love for jazz they would continue to work to establish the NJHF in Charlottesville. Despite these setbacks, Mr. Rutland and the other directors believed that the first year’s activities showed promise. The NJHF sponsored three concerts at local high schools. The concerts featured such jazz greats as Maxine Sullivan, Buddy Rich, and Jon Hendricks and Company, and each concert attracted more than 500 people. Although the NJHF lost some money on each concert, the directors thought that the concerts succeeded in publicizing and promoting the NJHF. In addition, a fundraiser at a Charlottesville country club brought $2,000 to the NJHF, and Mr. Rutland started the NJHF newsletter. The collection of objects for the museum was enlarged, and Louis Armstrong and Duke Ellington were posthumously inducted into the NJHF. At the end of the first year, enthusiasm among board members was still high, and they believed that the NJHF could survive indefinitely, albeit on a small scale. But a Hall of Fame in Charlottesville . . . Mr. Rutland believed that a hall of fame could succeed in Charlottesville, though other cities might at first seem more appropriate. More than 500,000 tourists annually were attracted to Charlottesville (1980 population: 40,000) to visit Thomas Jefferson’s home at Monticello, James Monroe’s home at Ash Lawn, and the Rotunda and the Lawn of the University of Virginia, where total enrollment was 16,000. Mr. Jefferson designed the Rotunda and the buildings on the Lawn and supervised their construction. The Virginia Office of Tourism promoted these national landmarks as well as the city’s two
81721_Ch03.indd 151
151
convention centers. In addition, 13 million people lived within a three-hour drive of Charlottesville. If Charlottesville seemed illogical for a hall of fame, Mr. Rutland reasoned, so did Cooperstown, New York, home of the Baseball Hall of Fame and Canton, Ohio, location of the Professional Football Hall of Fame. He thought that successful jazz festivals in such different places as Newport, Rhode Island, and French Lick, Indiana, showed that location was relatively unimportant for jazz. Moreover, a Charlottesville radio station recently switched to a music format called “Memory Lane,” which featured classics by Frank Sinatra, Patti Page, the Mills Brothers, the Glenn Miller Orchestra, and numerous others. The station played much jazz, and won the loyalty of many jazz enthusiasts in the Charlottesville area. The success of “Memory Lane” indicated to Mr. Rutland that the Charlottesville community could provide the NJHF with a base of interest and loyalty. Most important, Mr. Rutland believed that he and his friends possessed the commitment necessary to make a jazz hall of fame succeed. . . . And Halls of Fame in Other Cities? Although no national organization operated successfully, several local groups claimed to be the Jazz Hall of Fame, as Billboard magazine reported.
*** Billboard 4/28/84 HALL OF FAME IN HARLEM
by Sam Sutherland and Peter Keepnews CBS Records and the Harlem YMCA have joined forces to establish a Jazz Hall of Fame. The first induction ceremony will take place on May 14 at Avery Fisher Hall, combined with a concert featuring such artists as Ramsey Lewis, Hubert Laws, Ron Carter, and an all-star Latin Jazz ensemble. Proceeds from the concert will benefit the Harlem YMCA. Who will the initial inductees be, and how will they be chosen? What’s being described in the official literature as “a prestigious group of jazz editorialists, critics, producers, and respected connoisseurs” (and, also, incidentally, musicians—among those on the panel are Miles Davis, Dizzy Gillespie, Cab Calloway, Max Roach and the ubiquitous Dr. Billy Taylor) will do the actual selecting, but nominations are being solicited from the general public. Jazz lovers are invited to submit the names of six artists, three
9/16/08 5:00:25 PM
152
CHAPTER 3 / THE PROJECT MANAGER
living and three dead, to: The Harlem YMCA Jazz Hall of Fame, New York, NY 10030. Deadline for nominations is May 1. Billboard, 5/19/84 ONE, TWO, MANY HALLS OF FAME?
by Sam Sutherland and Peter Keepnews Monday night marks the official launch of the Harlem YMCA Jazz Hall of Fame (Billboard, April 28), a project in which CBS Records is closely involved. The Hall’s first inductees are being unveiled at an Avery Fisher Hall concert that also includes performances by, among others, Sarah Vaughan and Branford Marsalis. The project is being touted as the first jazz hall of fame, a statement that discounts a number of similar projects in the past that never quite reached fruition. But first or not, the good people of CBS and the Harlem YMCA are apparently in for some competition. According to a new publication known as JAMA, the Jazz Listeners/Musicians Newsletter, Dizzy Gillespie—who also is a member of the Harlem YMCA Jazz Hall of Fame committee—“promised in Kansas City, Mo. to ask musicians for help in establishing an International Jazz Hall of Fame” in that city. The newsletter quotes Gillespie, whom it describes as “honorary chairman of the proposed hall,” as vowing to ask “those musicians who were inspired by jazz”—among them Stevie Wonder, Quincy Jones and Paul McCartney (?)—to contribute financially to the Kansas City project, which, as envisioned by the great trumpeter, would also include a jazz museum, classrooms and performance areas. Is there room for two Jazz Halls of Fame? Do the people involved in the New York city project know about the Kansas City project, and vice versa? (Obviously Gillespie does, but does anyone else?) Remember the New York Jazz Museum? Remember the plaques in the sidewalk on 52nd Street (another CBS Records brainchild)? The notion of commemorating the contributions of the great jazz musicians is a noble one. It would be a shame to see the energies of the jazz community get diverted into too many different endeavors for accomplishing the same admirable goal—which, unfortunately, is what has tended to happen in the past.
81721_Ch03.indd 152
Billboard, 5/26/84 Also noted: the first inductees in the Harlem YMCA Jazz Hall of Fame (Billboard, May 19) have been announced. The posthumous inductees are, to nobody’s great surprise, Louis Armstrong, Duke Ellington, Count Basie, Charlie Parker, and—a slight surprise, perhaps—Mary Lou Williams. The living honorees are Roy Eldridge, Dizzy Gillespie, Miles Davis, Ella Fitzgerald and Art Blakey. *** The New York Jazz museum (which the 5/19/84 article referred to) was established in the early 1970s but quickly ran out of money and was closed a few years later. In the early 1960s, a jazz museum was established in New Orleans and because of insufficient funds, all that remained was the Louis Armstrong Memorial Park, the site of an outdoor jazz festival each summer. Tulane and Rutgers universities each possessed extensive archives containing thousands of phonograph records, tape recordings, posters, books, magazines, journals, and other historic pieces and memorabilia. Neither university, however, considered its archives a hall of fame. Other Halls of Fame The more prominent halls of fame in the U.S. were the Baseball, the Professional Football, the College Football, and the Country Music Hall of Fame. These and many other halls of fame were primarily concerned with preserving history by collecting and displaying memorabilia, compiling records, and inducting new members annually. Mr. Rutland visited most of the other halls of fame and learned that they were usually established by a significant contribution from an enthusiast. In the case of the Country Music Hall of Fame, some country music stars agreed to make a special recording of country hits and to donate the royalties to the organization. Mr. Rutland was especially interested in The Country Music Hall of Fame because of similarities between country music and jazz. Country music, like jazz, had a rich cultural history in America, and neither type of music was the most popular in the U.S. The Country Music Hall of Fame (CMHF) was established in 1967 in Nashville after a cooperative fundraising effort involving the city, artists, and sponsors. By 1976, the CMHF included a museum, an archives, a library, and a gift shop. More than one-half million people
9/16/08 5:00:26 PM
CASE
visited the CMHF in 1983, partly because of the nearby Grand Ole Opry, the premier concert hall for country music where the Grand Ole Opry cable radio broadcasts originated. Of the CMHF’s $2.1 million annual budget, 85 percent came from admissions, 10 percent from sales at the gift shop and by mail, and 5 percent from donations. In the past two years, the CMHF had formed the Friends of Country Music, now more than 2,000 people who donated $25 each per year and who received a country music newsletter every three months and discounts on CMHF merchandise.
The National Association of Jazz Educators Mr. Rutland was uncertain how much and what type of support he could get from the National Association of Jazz Educators. This organization, with 5,000 members, primarily coordinated and promoted jazz education programs. Performance programs were normally offered through music departments. Most high schools and colleges had bands that played a variety of jazz arrangements as part of their repertoire. Band conductors usually had a music degree from a major university and belonged to the National Association of Jazz Educators. Most of the jazz appreciation courses offered in schools throughout the U.S. treated jazz as a popular art form, as a barometer of society, rather than as a subject of interest in itself. Some educators believed that jazz greats such as Louis Armstrong and Duke Ellington should be honored not as jazz musicians, but as composers like George Gershwin and Richard Rogers. Indeed, a prominent jazz historian told Mr. Rutland that jazz might benefit more from breaking down this
Exhibit 1.
153
distinction between jazz artists and composers than from reinforcing it. The National Survey To get some of the answers to his many questions, Mr. Rutland engaged an independent consultant who conducted two surveys; the first was a national survey and the second a tourist survey. For the national survey, the consultant designed a questionnaire to gauge the respondent’s level of interest in both jazz and the concept of a National Jazz Hall of Fame, and to determine the respondent’s demographics. A sample size of 1,300 was used and the mailing covered the entire continental United States. The mailing list, obtained from the Smithsonian Institution in Washington, DC, contained names and addresses of people who had purchased the “Classic Jazz Record Collection,” as advertised in Smithsonian magazine. Of the 1,300 questionnaires, 440 were sent to Virginia residents and 860 to residents of other states in order to provide both statewide and national data. Of the questionnaires that went to other states, the majority was targeted toward major cities and apportioned according to the interest level for jazz in each city as indicated by the circulation statistics of Downbeat, a jazz magazine. Of the 860 questionnaires sent to the other states, 88 were sent to residents of Chicago, 88 to Detroit, 83 to New York City, 60 to San Francisco, 56 to Philadelphia, 56 to Washington, DC, 52 to Los Angeles, 46 to Charlotte, 46 to Miami, 45 to Dallas, 42 to Atlanta, 42 to Houston, 30 to Denver, 28 to Kansas City, 28 to New Orleans, 28 to St. Louis, 27 to Boston, and 15 to Seattle. Of the 1,300 questionnaires, 165, or 12.7 percent, were returned. As shown in Exhibit 1, 79 percent of the respondents were 35 years of age or older, 73 percent were male, and
Survey Results: Demographics of Respondents
Demographics
Age—35 Sex—Male Education—Grad. Job—Professional Income—$50,000 Non-profit Contr. $200/year
Percentage of Respondents
Percentage of All Record Buyers*
Census Data**
79 73 54 57 50 75
37 82 24*** 26 23
43 49 31 22 7
*Source: Consumer Purchasing of Records and Pre-recorded Tapes in the U.S., 1970–1983, Recording Industry Association of America. **Source: U.S. Department of Commerce, Bureau of the Census, 1982. ***Source: Simmons Market Research Bureau, 1982.
81721_Ch03.indd 153
9/16/08 5:00:26 PM
154
CHAPTER 3 / THE PROJECT MANAGER
annually to collect information on attractions nearby and throughout the state. The respondents came from all areas of the country, and most were traveling for more than one day. Almost 70 percent said they like jazz, mostly Dixieland and big band, and more than 60 percent indicated they would visit a Jazz Hall of Fame. The average admission they suggested was $3.50 per person.
the majority were well-educated, professionals, and had an annual income of more than $50,000. Of interest also was that 75 percent of the respondents contributed $200 or more per year to different non-profit organizations. Since the sample included a large number of record buyers of age 50 or older, the consultant weighted the survey results with age data obtained from the Recording Industry Association of America to make the survey results representative of all jazz-record buyers. The survey also showed in Exhibit 2 that swing was the most popular form of jazz, followed by Dixieland, and then more traditional forms of jazz, from which the consultant concluded that a nostalgic emphasis should gather support from jazz enthusiasts of all ages, and that later, the National Jazz Hall of Fame could promote more contemporary forms of jazz. As for services, the survey suggested in Exhibit 3 that respondents most wanted a performance center or concert hall. A museum and seminars were also popular choices. The consultant was surprised by the strong interest in information about jazz recordings because the average respondent did not buy many records. A newsletter was rated relatively unimportant by most respondents. Most gratifying for Mr. Rutland was that respondents on average were willing to contribute between $20.00 and $30.00 per year to the National Jazz Hall of Fame, with a weighted average contribution of $23.40.
The Consultant’s Recommendations The consultant limited his recommendations to the results of the two surveys. As a result, the question of whether the efforts in other cities to establish a National Jazz Hall of Fame would make the Charlottesville project infeasible was still unresolved. In a private discussion, however, the consultant intimated that “if the other efforts are as clumsily undertaken as many of the previous attempts, you will have nothing to worry about.” He thought it was time that a professional approach was taken toward this project. Specifically, he made three recommendations: 1. Launch a direct mail campaign to the 100,000 people on the Smithsonian jazz mailing list. The focus of the mailing should be an appeal by a jazz great such as Benny Goodman to become a Founding Sponsor of the National Jazz Hall of Fame. He estimated that the cost of the campaign would range between $25,000 and $30,000; however, with an average contribution of $25.00 per respondent, a response rate of only 2 percent would allow the National Jazz Hall of Fame to break even. 2. Appoint a full-time executive director with any funds exceeding the cost of the mailing. The principal responsibilities of the executive director would be to organize
The Tourist Survey In addition to conducting the National Survey, the consultant developed a questionnaire (see Appendix) and interviewed approximately 100 tourists to the Charlottesville area at the Western Virginia Visitors Center near Monticello. About 140,000 tourists stopped at the center
Exhibit 2.
Survey Results: Preferences for Different Styles of Jazz
Type of Interest
General Interest in Music Dixieland Swing Traditional Improvisational Jazz Rock Fusion Pop Jazz Classical
81721_Ch03.indd 154
Percentage of Respondents Answering with a 4 or 5 Rating
Weighted Percentage of Respondents Answering with a 4 or 5 Rating
62 62 87 63 41 25 15 27 68
71 70 81 66 48 47 9 53 73
9/16/08 5:00:26 PM
CASE
Exhibit 3.
Survey Results: Preferences for Services Offered Percentage of Respondents Answering with a 4 or 5 Rating
Weighted Percentage of Respondents Answering with a 4 or 5 Rating
Performance Center Concert Hall Artist Seminars Nightclub Museum Tourist Center Audio-Visual Exhibitions Shrine Educational Programs Record Information History Seminars Member Workshops Lounge
70 66 50 52 57 42 57 55 48 71 38 25 37
83 79 62 57 57 48 55 52 51 69 54 34 45
Financial Support: at $10.00/year at $20.00/year at $30.00/year
17 30 15
13 26 25
Number of Contributors
62
64
Service
and coordinate fundraising activities, to establish a performance center and museum, and to coordinate the collection of memorabilia and other artifacts. 3. Promote the National Jazz Hall of Fame at strategic locations around Charlottesville to attract tourists and other visitors. The Western Virginia Visitors Center was a prime prospect in his view for this activity. He calculated that 50,000 tourists annually at $3.00 each would provide sufficient funds to operate and maintain the National Jazz Hall of Fame. The consultant also identified what he considered the critical elements for his plan’s success. First, the National Jazz Hall of Fame should be professional in all of its services and communications to jazz enthusiasts. Second, the executive director should have prior experience in both fundraising and direct mail; he should have a commitment to and love for jazz, as well as administrative skill and creativity. Third, the
81721_Ch03.indd 155
155
National Jazz Hall of Fame should communicate frequently with Founding Sponsors to keep their interest and excitement alive. Finally, to ensure the enthusiastic cooperation of city officials, local merchants, and the Charlottesville community, he thought that more local prominence for the National Jazz Hall of Fame would prove indispensable. The National Jazz Hall of Fame—Dream or Reality As he paged through the consultant’s report, Mr. Rutland wondered what to make of the recommendations. While he was encouraged by a national base of support for his idea, he was unsure how the Board of Directors would react to the consultant’s proposals. With less than $2,500 in the bank, how would they get the necessary funds to implement the plan? Yet he knew he had to make some tough decisions, and quickly, if he wanted to make his dream a reality.
9/16/08 5:00:27 PM
156
CHAPTER 3 / THE PROJECT MANAGER
APPENDIX
81721_Ch03.indd 156
9/16/08 5:00:27 PM
DIRECTED READING
157
QUESTIONS 1. What is the project Mr. Rutland is trying to manage? Has it stayed the same? 2. Identify the various stakeholders in the project, including the competition. 3. Of the skills mentioned in the chapter that a project manager needs, which are most important here? Why? 4. What credibility does Mr. Rutland have? Is he a leader? 5. What cultures are relevant to this project? Describe the project environment.
6. What should Mr. Rutland do? Include the following issues: • Budget: acquiring adequate resources – philanthropic organizations – governmental agencies – donations – memberships – visitors • Budget: expenditures (consider Paramount theatre) • Performance: services/activities to offer • Competition • Schedule: deadlines, windows, milestones
The following reading integrates two views about the requirements for good project managers. One view concerns the personal and managerial characteristics of PMs and their ability to lead a team, regardless of the project. The other view considers the critical problems in the project in question and the PM’s talents relative to these problems. A survey is first described and then the critical problems that projects face are identified from the survey responses. Next, the skills required of project managers, as indicated by the survey respondents, are detailed. Last, the skills are related back to the critical project problems for an integrated view of the requirements for a successful project manager.
D I R E C T E D
R E A D I N G
WHAT IT TAKES TO BE A GOOD PROJECT MANAGER B. Z. Posner Selecting a good project manager is not a simple task. Being an effective project manager is an ongoing challenge. The complex nature and multifaceted range of activities involved in managing projects precludes easily identifying managerial talent and continually stretches the capabilities of talented project managers. Two seemingly contradictory viewpoints have been advanced about what is required to be a good project manager. One perspective prescribes a set of personal characteristics necessary to manage a project [1]. Such personal attributes include aggressiveness, confidence, poise, decisiveness, resolution, entrepreneurship, toughness, integrity, versatility, multidisciplinarity, and quick thinking.
“What It Takes to Be A Good Project Manager.” Project Management Journal, March 1987. ©1987 by the Project Management Institute. Reprinted by permission.
81721_Ch03.indd 157
However, Daniel Roman [2] maintains that it would take an extraordinary individual to have all of these critical personal characteristics. A more practical solution, he suggests, would be to determine the critical problems faced by project managers and to select a person who can handle such difficulties. The shortcoming with this second perspective, argue those like Michael Badaway [3], is that the primary problems of project managers are really not technical ones. The reason managers fail at managing projects, he contends, is because they lack critical organization and management skills. Scholars like Roman and Badaway—as well as practitioners—may actually be raising different issues. On the one hand, good project managers understand the critical problems which face them and are prepared to deal with them. On the other hand, managing projects well requires a set of particular attributes and skills. But, are these two viewpoints really at odds with one another? In this study they were discovered to be two sides of the same coin!
9/16/08 5:00:28 PM
158
CHAPTER 3 / THE PROJECT MANAGER
Study of Project Manager Problems and Skills Questionnaires were completed by project managers during a nationwide series of project management seminars. Project managers attending these seminars came from a variety of technology-oriented organizations. Responses to the survey instrument were both voluntary and confidential. Information about the respondents and the nature of their projects was collected. The typical project manager was a 37-year-old male, had nine people reporting to him, and was responsible for a small to moderate size project within a matrix organization structure. More specifically, there were 189 men and 98 women in the sample (N 287) and their ages ranged from 22 to 60 years of age (X 37.4, S.D. 8.3). Fifty-six percent indicated that they were the formal manager of the project. The size of their immediate project group ranged from 2 to over 100 people (median 8.9). Fifty-nine percent reported that they worked primarily on small projects (involving few people or functions, with a short time horizon) as compared to large projects (involving many people or functions, with a long time horizon). More than 63 percent indicated they were working within a matrix organization structure. No information was collected about the specific nature (e.g., new product development, R & D, MIS) of their projects. Two open-ended questions were asked (their order was randomized). The first asked about the skills necessary to be a successful project manager. The second question investigated the most likely problems encountered in managing projects. Responses to these questions were content analyzed. Content analysis is a systematic approach to data analysis, resulting in both qualitative assessments and quantitative information. Each respondent comment was first coded and then recoded several times as patterns of responses became apparent. The two questions were: 1. What factors or variables are most likely to cause you problems in managing a project? 2. What personal characteristics, traits, or skills make for “above average” project managers? What specific behaviors, techniques, or strategies do “above average” project managers use (or use better than their peers)? Problems in Managing Projects. There were nearly 900 statements about what factors or variables created “problems” in managing a project. Most of these statements could be clustered into eight categories as shown in Table 1. Inadequate resources was the issue most frequently mentioned as causing problems in managing a project. “No matter what the type or scope of your project,” wrote one engineering manager, “if insufficient resources are allocated to the project, you have to be a magician to be successful.” Not having the necessary budget or personnel for the project was a frequent complaint. However, the specific resource of time—and generally the lack thereof—was mentioned just
81721_Ch03.indd 158
about as often as the general inadequate resource lament. Typically, the problem of time was expressed as “having to meet unrealistic deadlines.” That resources are inadequate is caused by many factors, not the least of which being that resources are generally limited and costly. Before this hue is dismissed by veteran project managers as just so much bellyaching—”after all, there are never enough resources to go around”—it is important to examine the cause(s) of this problem. Respondents pointed out that resource allocation problems were usually created by senior management’s failure to be clear about project objectives, which in turn resulted in poor planning efforts. These two problems—lack of clear goals and effective planning—were specifically mentioned by more than 60 percent of the respondents. It is painfully obvious that vague goals and insufficient planning lead to mistakes in allocating the resources needed by project managers.
Table 1. Project Management Problems 1. 2. 3. 4. 5. 6. 7. 8.
Resources inadequate (69) Meeting (“unrealistic”) deadlines (67) Unclear goals/direction (63) Team members uncommitted (59) Insufficient planning (56) Breakdown of communications (54) Changes in goals and resources (42) Conflicts between departments or functions (35)
Note: Numbers in parentheses represent percentage of project managers whose response was included in this cluster.
The three most significant problems reported by firstline research, development, and engineering supervisors in Lauren Hitchcock’s [4] study parallels those identified by project managers. He found “insufficient definition of policy from top downward, how to define the goal of a problem, and budgeting and manpower assignments” to be the major problems confronting supervisors. It remains true that senior management needs to articulate clearly where the project should be going, why, and what it expects from project personnel. When project goals are not clear, it is difficult (if not impossible) to plan the project efficiently. The lack of planning contributes directly to unrealistic resource allocations and schedules. People assigned to the project are unlikely, therefore, to commit energetically to the endeavor. The lack of commitment (and poor motivation) among project personnel was reported as emerging more from the problems already mentioned than from issues associated with the project’s technology or organizational structure (e.g., matrix form). The communication breakdowns (problems which occur during the life of a project) were often referred to as “inevitable.” These breakdowns occur as a result of the ambiguity surrounding the project, but also result from difficulties in coordinating and integrating diverse perspectives and
9/16/08 5:00:28 PM
DIRECTED READING
personalities. The project manager’s challenge is to handle communication breakdowns as they arise rather than being able to predict (and control) communication problems before they happen. How the problems confronting project managers were interrelated is exemplified by how frequently problems of communication and dealing with conflicts were linked by respondents. The linkage between these two issues was demonstrated in statements like: “My problem is being able to effectively communicate with people when we disagree over priorities.” “Conflicts between departments end up as major communication hassles.” Conflicts between departments were also linked to earlier problems of poor goal-setting and planning. Managing changes (e.g., in goals, specifications, resources) contributed substantially to project management headaches. This was often mentioned as “Murphy’s Law,” highlighting the context or environment in which project management occurs. Planning cannot accurately account for future possibilities (or better yet, unknowns). Interestingly, less than one in ten project managers mentioned directly a “technological” factor or variable as significantly causing them problems in managing a project.
Project Manager Skills The second issue investigated was what project manager skills—traits, characteristics, attributes, behaviors, techniques—make a difference in successfully managing projects. Most respondents easily generated four to five items which they believed made the difference between average and superior project performance. The result was nearly 1400 statements. These statements were summarized into six skill areas as shown in Table 2. Several factors within each are highlighted. Eighty-four percent of the respondents mentioned “being a good communicator” as an essential project manager skill.
Table 2.
Project Management Skills
1. Communication Skills (84) • Listening • Persuading 2. Organizational Skills (75) • Planning • Goal-setting • Analyzing 3. Team Building Skills (72) • Empathy • Motivation • Esprit de corps
4. Leadership Skills (68) • Sets an example • Energetic • Vision (big picture) • Delegates • Positive 5. Coping Skills (59) • Flexibility • Creativity • Patience • Persistence 6. Technological Skills (46) • Experience • Project knowledge
Note: Numbers in parentheses represent percentage of project managers whose response was included in this cluster.
81721_Ch03.indd 159
159
Being persuasive or being able to sell one’s ideas was frequently mentioned as a characteristic of a good communicator within the project management context. Many people also cited the importance of receiving information, or good listening skills. As one systems engineer exclaimed: “The good project managers manage not by the seat of their pants but by the soles of their feet!” Organizational skills represented a second major set of competencies. Characteristics included in this category were planning and goal-setting abilities, along with the ability to be analytical. The ability to prioritize, captured in the phrases “stays on track” and “keeps the project goals in perspective,” was also identified as significant. While successful project managers were viewed as good problem solvers, what really differentiated them from their soso counterparts was their problem finding ability. Because of their exceptional communication skills, goal clarity, and planning, effective project managers were aware of issues before they became problems. Problem finding gave them greater degrees of freedom, enabling them to avoid being seriously sidetracked by problems caused by unforeseen events. The important team building skills involved developing empathetic relationships with other members of the project team. Being sensitive to the needs of others, motivating people, and building a strong sense of team spirit were identified as essential for effectively managing a project. “The best project managers use a lot of ‘we’ statements in describing the project,” wrote one computer programmer. Being clear about the project’s objectives and subsequently breaking down the project into its component parts (e.g., schedules) helped project participants to understand their interdependencies and the need for teamwork. Several different attributes and behaviors were catalogued under leadership skills. These included setting a good example, seeing the big picture, being enthusiastic, having a positive outlook, taking initiative, and trusting people. Having a vision is closely related to goal clarity (which was included as an organizational skill). The leadership component of this competency was best expressed by one financial analyst as “the ability to see the forest through the trees.” Since, as is often lamented, the only constant in managing a project is change, successful project managers require coping or stressmanagement skills. Respondents indicated that both flexibility and creativity were involved in effectively dealing (or coping) with change, as were patience and persistence. What project managers experience are generally high levels of stress. How well they handle stress (“grace under pressure”) significantly affects their eventual success or failure. The final cluster of skills was labeled technological. Successful project managers were seen as having relevant experience or knowledge about the technology required by the project. Seldom, however, were effective project managers seen as technological “experts.” Indeed, expertise was often felt to be detrimental because it decreased flexibility and the willingness to consider alternative perspectives.
9/16/08 5:00:28 PM
160
CHAPTER 3 / THE PROJECT MANAGER
Project managers do need to be sufficiently well versed in the technology to be able to ask the right questions because, as one senior military officer pointed out, “you’ve got to be able to know when people are blowing smoke at you.”
Skills and Problems: Fundamentally Interconnected It has been argued in the literature that project managers require certain skills in order to be effective. It has also been argued that project managers need to be able to handle certain problems in order to be effective. The results of this study suggest that these two perspectives are not contradictory but are fundamentally compatible. When the set of required skills is considered side-by-side with the set of critical problems project managers face, the complementary nature of these two perspectives is evident. This is illustrated in Table 3. Without arguing which comes first, it is clear that either (a) project managers require certain skills in order to deal effectively with the factors most likely to create problems for them in managing the project, or (b) because certain problems are most likely to confront project managers, they require particular skills in order to handle them. While this one-on-one matching in Table 3 obviously oversimplifies the dynamic nature of project management, it does have an inherent logical appeal. Since communication breakdowns are likely to create project management problems, effective project managers need to cultivate their communications (persuading and listening) skills. Project managers with good organizational skills are likely to be more effective at planning and subsequently allocating resources. Unless project managers are able to build strong project teams, they are likely to be plagued by problems caused by poorly committed team members and interdepartmental conflict. Project goals are likely to be more easily understood when the project manager’s leadership is consistent. Interpersonal conflicts will likely diminish when project managers set clear standards of performance and demonstrate their trust in, and respect for, others. The
Table 3. Skills—Problems: Interconnected in Project Management Communication Organizational Team Building Leadership Coping Technological
81721_Ch03.indd 160
Breakdowns in communications Insufficient planning Resources inadequate Team members uncommitted Weak inter-unit integration Unclear goals/direction Interpersonal conflicts Handling changes Meeting (“unrealistic”) deadlines
inevitable changes which accompany any project will be less problematic when not only coped with calmly, but also when handled with flexibility and creativity. Finally, problems created when deadlines and schedules are unrealistic may be minimized through a project manager’s problem finding ability and experience in getting things back on track. What was found underscores the claim that the primary problems of project managers are not technical, but human. Improving project managers’ technological capabilities will be helpful only to the extent that this improves their ability to communicate, be organized, build teams, provide leadership, and deal comfortably with change. The challenge for technical managers, or for those moving from technical into managerial positions, is to recognize the need for, and to develop where necessary, their interpersonal skills. References 1. Archibald, R. D. Managing High-Technology Programs and Projects. New York: John Wiley & Sons, 1976; Kerzner, H. Project Management for Executives. New York: Van Nostrand Reinhold, 1982; Stuckenbruck, L., “Ten Attributes of the Proficient Project Manager.” Proceedings of the Project Management Institute, Montreal, 1976, 40–47; and Thamhain, H., and Wilemon, D., “Skill Requirements of Engineering Project Managers.” Twenty-Sixth IEEE Joint Engineering Management Conference, 1978. 2. Roman, D. D. Managing Projects: A Systems Perspective. New York: Elsevier Science Publishing, 1985. 3. Badaway, M. Developing Managerial Skills in Scientists and Engineers. New York: Van Nostrand Reinhold, 1982. 4. Hitchcock, L. “Problems of First-Line Supervisors.” Research Management Vol. 10, No. 6, 1967, 385–397.
Questions 1. What primary characteristic distinguishes the very successful project managers from the more mediocre project managers? 2. In Table 3, match the rankings between skills and problems. Why aren’t the top skills matched to the main problems? 3. In Table 1, which of the problems are related to project setup (perhaps occurring before a project manager was selected) and which are related to the project manager’s skills? 4. How does Table 1 compare to the discussion in the chapter? 5. How does Table 2 compare to the discussion in the chapter?
9/16/08 5:00:29 PM
C
H
A
P
T
E
R
4 Negotiation and the Management of Conflict
Conflict has been mentioned many times thus far in this book. This chapter is about conflict. It is also about negotiation—the skill required to resolve most conflicts. The question arises, why should there be so much conflict on projects? One of several causes is that conflict arises when people working on the same project have somewhat different ideas about how to achieve project objectives. But why should such a disagreement occur? Is there not “one best way?” There may be one best way, but exactly which way is the “one best” is a matter surrounded by uncertainty. Most conflicts have their roots in uncertainty, and negotiation is a way of managing the resultant risk. Therefore, this chapter is also about risk management, about dealing with conflicts that often arise from uncertainty. As we will see in Chapter 6, the process of planning a project usually requires inputs from many people. Even when the project is relatively small and simple, planning involves the interaction of almost every functional and staff operation in the organization. It is virtually impossible for these interactions to take place without conflict, and when a conflict arises, it is helpful if there are acceptable methods to reduce or resolve it. Conflict has sometimes been defined as “the process which begins when one party perceives that the other has frustrated, or is about to frustrate, some concern of his” (Thomas, 1976, p. 891). While conflict can arise over issues of belief or feelings or behavior, our concern in this chapter is focused for the most part on goal conflicts that occur when an individual or group pursues goals different from those of other individuals or groups (Raiffa, 1982, Chapter 12). A party to the conflict will be satisfied when the level of frustration has been lowered to the point where no action, present or future, against the other party is contemplated. When all parties to the conflict are satisfied to this point, the conflict is said to be resolved. There are, of course, many ways to resolve conflict. Brute force is a time-honored method, as is the absolute rule of the monarch, but the rule of law is the method of choice for modern societies—in spite of occasional lapses. Conflict resolution is the ultimate purpose of law. Organizations establish elaborate and complex sets of rules and regulations to settle disputes between the organization itself and the individuals and groups with whom it interacts. Contracts between a firm and its suppliers, its trade unions, and its customers are written to govern the settlement of potential conflicts. But the various parties-at-interest (stakeholders)
161
81721_Ch04.indd 161
9/16/08 12:46:39 AM
162
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
do not always agree about the meaning of a law or a provision in a contract. No agreement, however detailed, can cover all the circumstances that might arise in the extensive relationships between the buyer and the seller of complicated industrial equipment, between the user and the supplier of engineering consulting services, between the producer and user of computer programs—the list of potential conflicts is endless. Our overcrowded courts are witness to the extent and variety of conflict. According to the web page of the New York State Bar Association, there are approximately 850,000 lawyers in the United States. The great majority of this group that numbers between 25 and 35 percent of the world’s supply of lawyers are employed in helping conflicting parties to adjudicate or settle their differences. In this chapter, we examine the nature of negotiation as a means of reducing or resolving the kinds of conflict that typically occur within projects. But before we begin the discussion, it must be made quite clear that this chapter is not a primer on how to negotiate; a course in negotiation is beyond the scope of this book (for such information, see the bibliography). Rather, this chapter focuses on the roles and applications of negotiation in the management of projects. Note also that we have given minimal attention to negotiations between the organization and outside vendors. In our experience, this type of negotiation is conducted sometimes by the project manager, sometimes by the project engineer, but most often by members of the organization’s purchasing department. In any case, negotiations between buyer and seller are admirably covered by Raiffa (1982).
Project Management in Practice Selling New Area Codes to Consumers Who Don’t Want Them
After analyzing the area code problem for some time, BellSouth received permission from all regulatory and organizational authorities in December 1994 to proceed with splitting South Carolina into two area codes and install the new code, 864, in the upper northwest region of the state. The project task was massive, yet the conversion of all equipment, databases, and associated systems had to be completed before the existing prefixes ran out in 12–18 months. However, in spite of the demanding technical challenges, one of the most difficult tasks facing the project team was confronting the dilemma that this conversion was a product that South Carolina’s phone customers absolutely did not want! Nevertheless, the exploding demand for fax machines, cellular telephones, pagers, additional residential phone lines, Internet service, and other such recent technological innovations required additional area codes to make them operative. Here was a basic conflict: “selling” a populace on the need to change their area code so they can use the new innovations they are purchasing.
81721_Ch04.indd 162
The problem was exacerbated by the lack of time to involve the populace in the decision-making process and options available: changing the area code boundaries, using multiple area codes in the same region, splitting an area code region and adding a new code, and a few others. BellSouth thus adopted a variety of measures to communicate the need for the new area code to their customers:
• • • • • •
Developing a regional advertising campaign Sending out promotional brochures Putting inserts into customer bills Contract with an inbound telemarketing company to handle calls and provide information Informing all employees who had customer contact about how to explain the need Establishing a “South Carolina Area Code Assistance Hotline”
As the new system went live on May 1, 1996, the changeover was smooth and uneventful, a tribute not
9/16/08 12:46:39 AM
NEGOTIATION AND THE MANAGEMENT OF CONFLICT
250 360
Oregon
163
British Columbia Western Washington
Connecticut
541
Chicago suburbs
Ohio
Northern & Western Colorado
860
330
Western Virginia
630,847
Missouri
Eastern Tennessee
970
540
423
520 Los Angeles
Bermuda
441
573
562
864 770 Dallas
Atlanta
334
South Carolina
352
972
Northern Florida
954
Arizona (except Phoenix) Houston
941
281 Southern Alabama
Southeastern Florida Southwestern Florida
This map reflects the large number of new area codes introduced in 1995–96 alone.
only to the technical ability of the project team but also their marketing prowess. Of course, the customers did not have any choice in the matter, but they
could have made the process much more difficult and time consuming.
Source: M.W. Strickland, “ ‘Mission Possible’: Managing an Area Code Relief Project,” PM Network, March 1997, pp. 39–46.
Debate over the proper technical approach to a problem often generates a collaborative solution that is superior to any solution originally proposed. Conflict often educates individuals and groups about the goals/objectives of other individuals and groups in the organization, thereby satisfying a precondition for valuable win-win negotiations (see Section 4.3). Indeed, the act of engaging in win-win negotiations serves as an example of the positive outcomes that can result from such an approach to conflict resolution. In Chapter 3 we noted that negotiation was a critical skill required of the project manager. No project manager should attempt to practice his or her trade without explicit training in negotiation. In this chapter, we describe typical areas of project management where this skill is mandatory. In addition, we will cover some of the appropriate and inappropriate approaches to negotiation, as well as a few of the characteristics of successful negotiation suggested by experts in the field or indicated by our experience. We will also note some ethical issues regarding negotiation. There are probably more opportunities for ethical missteps in handling conflicts and negotiations than in any other aspect of project management. Unlike other chapters, we will use comparatively few illustrative examples. Successful negotiation tends to be idiosyncratic to the actual situation, and most brief examples do little to help transform theory into practice. We have, however, included a vignette at the end of the chapter. This vignette was adapted from “real life”; the names were changed to protect innocent and guilty alike.
81721_Ch04.indd 163
9/16/08 12:46:39 AM
164
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
4.1
THE NATURE OF NEGOTIATION The favored technique for resolving conflict is negotiation. What is negotiation? Wall (1985, preface) defines negotiation as “the process through which two or more parties seek an acceptable rate of exchange for items they own or control.” Dissatisfied with this definition, he spends part of a chapter extending and discussing the concept (Chapter 1), without a great deal of improvement. Cohen (1980, p. 15) says that “Negotiation is a field of knowledge and endeavor that focuses on gaining the favor of people from whom we want things.” Other authors define negotiation differently, but do not appreciably extend Cohen’s definition. Even if no single definition neatly fits all the activities we label “negotiation,” we do recognize that such terms as “mediate,” “conciliate,” “make peace,” “bring to agreement,” “settle differences,” “moderate,” “arbitrate,” “adjust differences,” “compromise,” “bargain,” “dicker,” and “haggle” (Roget’s International Thesaurus, 1993) are synonyms for “ negotiate” in some instances. Most of the conflicts that involve the organization and outsiders have to do with property rights and contractual obligations. In these cases, the parties to negotiation see themselves as opponents. Conflicts arising inside the organization may also appear to involve property rights and obligations, but they typically differ from conflicts with outsiders in one important way: As far as the firm is concerned, they are conflicts between allies, not opponents. Wall (1985, pp. 149–150) makes this point neatly: Organizations, like groups, consist of interdependent parts that have their own values, interests, perceptions, and goals. Each unit seeks to fulfill its particular goal . . . and the effectiveness of the organization depends on the success of each unit’s fulfillment of its specialized task. Just as important as the fulfillment of the separate tasks is the integration of the unit activities such that each unit’s activities aid or at least do not conflict with those of the others. One of the ways in which organizations facilitate this integration is to establish “lateral relations [which] allow decisions to be made horizontally across lines of authority” (Wall, 1985, p. 150). Because each unit will have its own goals, integrating the activities of two or more units is certain to produce the conflicts that Wall says should not take place. The conflicts may, however, be resolved by negotiating a solution, if one exists, that produces gains (or minimizes losses) for all parties. Raiffa (1982, p. 139) defines a Pareto-optimal solution to the two-party conflict and discusses the nature of the bargaining process required to reach optimality, a difficult and time-consuming process. While it is not likely that the conflicting parties will know and understand the complex trade-offs in a real-world, project management, many-persons/many-issues conflict (see Raiffa, 1982, Chapters 17–23), the general objective is to find a solution such that no party can be made better off without making another party worse off by the same amount or more—i.e., a Pareto-optimal solution. The concept of a Pareto-optimal solution is important. Approaching intraproject conflicts with a desire to win a victory over other parties is inappropriate. The PM must remember that she will be negotiating with project stakeholders many times in the future. If she conducts a win-lose negotiation and the other party loses, from then on she will face a determined adversary who seeks to defeat her. This is not helpful. The proper outcome of this type of negotiation should be to optimize the outcome in terms of overall organizational goals. Although it is not always obvious how to do this, negotiation is clearly the correct approach. During the negotiation process, an ethical situation often arises that is worth mentioning. Consider the situation where a firm requests an outside contractor to develop a software package to achieve some function. When the firm asks for a specific objective to be accomplished, it frequently does not know if that is a major job or a trivial task because it lacks technical competence in that area. Thus, the contractor has the opportunity to misrepresent the task to
81721_Ch04.indd 164
9/16/08 12:46:40 AM
4.2 PARTNERING, CHARTERING, AND SCOPE CHANGE
165
its customer, either inflating the cost for a trivial task or minimizing the impact of a significant task in order to acquire the contract and then boosting the cost later. The ethics of the situation require that each party in the negotiation be honest with the other, even in situations where it is clear there will not be further work between the two.
4.2
PARTNERING, CHARTERING, AND SCOPE CHANGE Projects provide ample opportunity for the project manager (PM) to utilize her or his skills at negotiation. There are, however, three situations commonly arising during projects that call for the highest level of negotiating skill the PM can muster: the use of subcontractors, the use of input from two or more functional units to design and develop the project’s mission, and the management of changes ordered in the project’s deliverables and/or priorities after the project is underway (de Laat, 1994; Hughes, 1998). The former probably accounts for more litigation than all other aspects of the project combined. The latter two are, in the authors’ experience, by far the most common and most troublesome issues project managers report facing.
Partnering In recent years there has been a steady growth in the frequency of outsourcing parts of projects (Smith, 1998). External suppliers, increasingly, are delivering parts of projects, including tangible products and services as well as intangible knowledge and skills. There are many reasons beyond avoidance of litigation that firms enter partnering arrangements with each other, for example, diversification of technical risk, avoidance of capital investment, reducing political risk on multinational projects, shortening the duration of the project, and pooling of complementary knowledge, among others (Beecham et al., 1998, p. 192). Generally, relations between the organization carrying out a project and a subcontractor working on the project are best characterized as adversarial. The parent organization’s objective is to get the deliverable at the lowest possible cost, as soon as possible. The subcontractor’s objective is to produce the deliverable at the highest possible profit with the least effort. These conflicting interests tend to lead both parties to work in an atmosphere of mutual suspicion and antagonism. Indeed, it is almost axiomatic that the two parties will have significantly different ideas about the exact nature of the deliverable itself. The concept of “partnering” has been developed to replace this atmosphere with one of cooperation and mutual helpfulness, but the basically adversarial relationship makes cooperation difficult in the best of cases (Larson et al., 1997). Cowen et al. (1992, p. 5, italics in original) define partnering as follows: Project partnering is a method of transforming contractual relationships into a cohesive, cooperative project team with a single set of goals and established procedures for resolving disputes in a timely and effective manner. They present a multistep process for building partnered projects. First, the parent firm must make a commitment to partnering, select subcontractors who will also make such a commitment, engage in joint team-building exercises, and develop a “charter” for the project. (See the next subsection for a description of such a charter.) Second, both parties must implement the partnering process with a four-part agreement on: (1) “joint evaluation” of the project’s progress; (2) a method for resolving any problems or disagreements; (3) acceptance of a goal for continuous improvement (also known as TQM) for the joint project; and (4) continuous support for the process of partnering from senior management of both parties. Finally, the parties commit to a joint review of “project execution” when the project is completed. Beecham et al. (1998, p. 194ff) note several things that can “doom” partnering agreements and they
81721_Ch04.indd 165
9/16/08 12:46:40 AM
166
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
develop several “propositions” that lead to success. Partnering is an attempt to mitigate the risks associated with subcontracting. Consider the nature of the steps listed above. Clearly, there are specific risks that must be managed in each of them. Each step in this process must be accompanied by negotiation, and the negotiations must be nonadversarial. The entire concept is firmly rooted in the assumption of mutual trust between the partners, and this assumption, too, requires nonadversarial negotiation. Finally, these articles focus on partnering when the partners are members of different organizations. We think the issue is no less relevant when the partners are from different divisions or departments of the same parent organization. Identical assumptions hold, identical steps must be taken, and interparty agreements must be reached for partnering to succeed. The concept of partnering, however, goes far beyond two-party agreements between buyer and seller or interdepartmental cooperation on a project. The use of multiparty consortia to pursue technological research objectives is common. For example, the Automotive Composites Consortium was created in 1989 by Chrysler, Ford, and General Motors to develop plastic-processing technologies for use in automobile manufacture. The consortium was exempted from prosecution under the U.S. anti-trust laws when the National Cooperative Research Act of 1984 was passed expressly to allow such cooperation among competitors (Rosegger et al., 1990). There are a great many such groups of competitors engaged in cooperative research and other cooperative activities (not, one hopes, in price-setting or other illegal activities). They exist worldwide and are often multinational in their membership; for example, consider the three well-known aviation groups, Airbus Industry (British, French, Spanish, and German), CFM International (USA and France), and International Aero Engines (USA and UK). Airbus Industry is not only a consortium of private firms from four different nations, but each of the four governments subsidized their respective private firms. This venture, apparently undertaken in order to foster a European competitor to USA’s Boeing Aircraft, resulted in a successful entry into the market for commercial aircraft. Partnering, however, is not without its problems. There can be no doubt that those who have not had much experience with partnering underrate its difficulty. Partnering requires strong support from senior management of all participants, and it requires continuous support of project objectives and partnering agreements (Moore et al., 1995). Above all, and most difficult of all, it requires open and honest communication between the partners. With all of its problems, however, partnering yields benefits great enough to be worth the efforts required to make it work correctly (Baker, 1996; Larson et al., 1997).
Chartering The agreements between groups partnering on large endeavors are often referred to as charters. A project (program, etc.) charter is simply a written agreement between the PM, senior management, and the functional managers who are committing resources and/or people to a specific project (program, etc.). Bear in mind, the charter may take many different forms. Typically, it details the expected deliverables, often including schedules, budgets, and resource commitments. It attests to the fact that senior management of all relevant organizations, functional managers, and the PM are “on the same page,” agreeing about what is to be done, when, and at what cost. Note that if there is such an agreement, there is also an implication that none of the parties will change the agreement unilaterally, or, at least, without prior consultation with the other parties. Most projects do not have charters, which is one reason for observing that most projects are not completed on specification, on time, and on budget. In Chapter 6, we will describe an iterative process for developing project action plans wherein individuals responsible for a task or subtask provide an action plan for completing it. We note that it is not uncommon for the individuals or groups who make commitments during the process of developing the project’s action plan to sign-off on their commitments. The signed-off project
81721_Ch04.indd 166
9/16/08 12:46:40 AM
4.2 PARTNERING, CHARTERING, AND SCOPE CHANGE
167
plan or set of action plans can constitute a project charter, particularly if senior management has signed-off on the overall mission statement, and if it is recognized as a charter by all parties to the plan. A somewhat less specific project charter appears in Cowen et al. (1992, Figure 2, p. 8), in which the various members of the partnering team sign a commitment to:
• • • •
Meet design intent Complete contract without need for litigation Finish project on schedule: —Timely resolution of issues —Manage joint schedule Keep cost growth to less than 2 percent . . . etc.
Of course, to meet the underlying purpose of a charter, even these less-specific terms assume an agreement on the “design intent,” the schedule, and costs.
Scope Change
PMBOK Guide
81721_Ch04.indd 167
The problem of changing the scope, or performance, expected of a project is a major issue in project management and constitutes the second PMBOK knowledge area. This topic will be further discussed briefly in Section 6.1 on planning, and then in greater detail in Sections 11.3 and 11.7 when we get into the issue of controlling the project. No matter how carefully a project is planned, it is almost certain to be changed before completion. No matter how carefully defined at the start, the scope of most projects is subject to considerable uncertainty. There are three basic causes for change in projects. Some changes result because planners erred in their initial assessment about how to achieve a given end or erred in their choice of the proper goal for the project. Technological uncertainty is the fundamental causal factor for either error. The foundation for a building must be changed because a preliminary geological study did not reveal a weakness in the structure of the ground on which the building will stand. An R & D project must be altered because metallurgical test results indicate another approach should be adopted. The project team becomes aware of a recent innovation that allows a faster, cheaper solution to the conformation of a new computer. Other changes result because the client/user or project team learns more about the nature of the project deliverable or about the setting in which it is to be used. An increase in user or team knowledge or sophistication is the primary factor leading to change. A computer program must be extended or rewritten because the user thinks of new uses for the software. Physicians request that intensive care units in a hospital be equipped with laminar air-flow control in order to accommodate patients highly subject to infection who might otherwise not be admissible in an ICU. The fledgling audio-addict upgrades the specifications for a system to include very high frequencies so that his dog can enjoy the music, too. A third source of change is the mandate. This is a change in the environment in which the project is being conducted. As such, it cannot be controlled by the PM. A new law is passed. A government regulatory unit articulates a new policy. A trade association sets a new standard. The parent organization of the user applies a new criterion for its purchases. In other words, the rules of conduct for the project are altered. A state-approved pollution control system must be adopted for each chemical refinery project. The state government requires all new insurance policies to conform to a revised law specifying that certain information must be given to potential purchasers. At times, mandates affect only priorities. The mandate in question might move a very important customer to the “head of the line” for some scarce resource or service.
9/16/08 12:46:40 AM
168
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
To some extent, risk management techniques can be applied to scope change. Technological uncertainty can be mitigated by careful analysis of the technologies involved, including the use of technological forecasting. Risk of scope change caused by increased user knowledge can only be managed by improving the up-front communication with the client and then establishing a formal process to handle change. See Chapter 11 for more about this. Finally, mandates are, for the most part, unpredictable. These can be “managed” only by having some flexibility built into the budget and schedule of the project. Ways of doing this sensibly will be discussed in the following two chapters. As Greek philosopher Heraclitus said, “Nothing endures but change.” It is thus with projects, but whatever the nature of the change, specifications of the deliverables must be altered, and the schedule and budget recalculated. Obviously, negotiation will be required to develop new agreements between the parties-at-interest to the project. These negotiations are difficult because most of the stakeholders will have a strong interest in maintaining the status quo. If the proposed change benefits the client and increases the cost of the project, the producer will try to sequester some of the user’s potential benefit in the form of added charges to offset the added cost. The client will, of course, resist. All parties must, once again, seek a Paretooptimal solution—always a difficult task. Change by mandate raises an additional problem. Not only are the project’s deliverables, budget, and schedule usually changed, the priorities of other projects are typically changed too, if only temporarily while the mandate receives the system’s full attention. Suddenly, a PM loses access to key resources, because they are urgently required elsewhere. Key contributors to a project miss meetings or are unable to keep promised task-delivery dates. All too often, the PM’s response to this state of affairs is anger and/or discouragement. Neither is appropriate. This project is so important, we can’t let things that are more important interfere with it. Anonymous After discussing priorities with both PMs and senior managers, it has become clear to us that most firms actually have only three levels of priority (no matter how ornate the procedure for setting project priorities might seem to be). First, there are the high-priority projects, that is, the “set” of projects currently being supported. When resource conflicts arise within this high-priority set, precedence is typically given to those projects with the earliest due date. (More about this is in Chapter 9.) Second, there are the lower-priority projects, the projects “we would like to do when we have the time and money.” Third, occasionally, there are urgent projects, mandates, that must be done immediately. “Customer A’s project must be finished by the end of the month.” “The state’s mandate must be met by June 30.” Everything else is delayed to ensure that mandates are met. As noted earlier, we will have more to say on this subject in Chapter 11. While project charters and partnerships would certainly help the PM deal with conflicts that naturally arise during a project, the use of charters and partnering is growing slowly— though outsourcing is growing rapidly. It is understandably difficult to convince senior managers to make the firm commitments implied in a project charter in the face of a highly uncertain future. Functional managers are loath to make firm commitments for precisely the same reason. So, too, the client, aware of her or his own ignorance about the degree to which the project output will meet his or her needs, is cautious about commitment—even when a procedure for negotiating change exists.
81721_Ch04.indd 168
9/16/08 12:46:41 AM
4.3 CONFLICT AND THE PROJECT LIFE CYCLE
169
Partnering is a recently developed concept, and in our litigious society any system for conflict resolution that asks parties to forego lawsuits is viewed with considerable suspicion. Indeed, we find that a great many organizations preach “team building,” “TQM,” and “employee involvement,” but many fail to practice what they preach. For each participative manager you find, we can show you a dozen micromanagers. For each team player ready to share responsibility, we can show you a dozen “blame placers.” The era of project charters and partnering is approaching, but it is not yet here.
4.3
CONFLICT AND THE PROJECT LIFE CYCLE In this section, following a brief discussion of the project life cycle, we will categorize the types of conflicts that frequently occur in the project environment, and then amplify the nature of these conflicts. Finally, we will link the project life cycle with the fundamental conflict categories and discover that certain patterns of conflict are associated with the different periods in the life of a project. With this knowledge, the PM can do a faster and more accurate job of diagnosing the nature of the conflicts he or she is facing, thereby reducing the likelihood of escalating the conflict by dealing with it ineffectually.
More on the Project Life Cycle Various authors define the stages of the project life cycle (see Figures 1-3, 1-4, and 1-5) in different ways. Two of the most commonly cited definitions are those of Thamhain et al. (1975a) and Adams et al. (1983). The former use a four-stage model with project formation, buildup, main program, and phase-out identified as the stages of the life cycle. Adams et al. also break the project life cycle into four, but slightly different, stages: conceptualization, planning, execution, and termination. For our purposes, these two views of the cycle are not significantly different. During the first stage, senior management tentatively, sometimes unofficially, approves preliminary planning for a project. Often, this management recognition is preceded by some strictly unofficial “bootleg” work to test the feasibility of an idea. Initial planning is undertaken, basic objectives are often adopted, and the project may be “scoped out.” The second stage is typified by detailed planning, budgeting, scheduling, and the aggregation of resources. In the third stage, the lion’s share of the actual work on the project is accomplished. During the final stage of the life cycle, work is completed and products are turned over to the client or user. This stage also includes disposition of the project’s assets and personnel. It may even include preparation for the initial stage of another related project to follow.
Categories of Conflict All stages of the project life cycle appear to be typified by conflict. In Chapter 4, we discussed some of the human factors that require the PM to be skilled at reducing interpersonal tensions. In that chapter, we also introduced the work of Thamhain et al. (1975a, 1975b) on conflict in the project. These conflicts center on such matters as schedules, priorities, staff and labor requirements, technical factors, administrative procedures, cost estimates, and, of course, personality conflicts (Afzalur, 1992). Thamhain et al. collected data on the frequency and magnitude of conflicts of each type during each stage of the project life cycle. Multiplying conflict frequency by a measure of conflict magnitude and adjusting for the proportion of PMs who reported each specific type of conflict, they derived an estimate of the “intensity” of the conflicts (see Figure 4-1).
81721_Ch04.indd 169
9/16/08 12:46:41 AM
170
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT .4
Average total conflict
Start
Figure 4-1
Schedules Priorities Labor Technical Procedures Cost Personality
Schedules Priorities Labor Technical Procedures Cost Personality
.1
Schedules Priorities Labor Technical Procedures Cost Personality
.2 Conflict over schedules Conflict over priorities Conflict over labor Conflict over tech. opinions Conflict over procedures Conflict over cost Personality conflict
Conflict intensity
.3
At the project formation
At the early program phases
During the main program
Toward the end of the program
Program life
Time
Finish
Conflict intensity over the project life cycle. Source: Thamhain et al. (1975a).
On examination of the data, it appears that the conflicts fall into three fundamentally different categories: 1. Groups working on the project may have different goals and expectations. 2. There is considerable uncertainty about who has the authority to make decisions. 3. There are interpersonal conflicts between people who are parties-at-interest in the project. Some conflicts reflect the fact that the day-to-day work on projects is usually carried out by many different units of the organization, units that often differ in their objectives and technical judgments. The result is that these units have different expectations about the project, its costs and rewards, its relative importance, and its timing. Conflicts about schedules, intra- and interproject priorities, cost estimates, and staff time tend to fall into this category. At base, they arise because the project manager and the functional managers have very different goals. The PM’s concern is the project. The primary interest of the functional manager is the daily operation of the functional department. Other conflicts reflect the fact that both technical and administrative procedures are important aspects of project management. Uncertainty about who has the authority to make decisions on resource allocation, on administrative procedures, on communication, on technological choices, and on all the other matters affecting the project produces conflict between the PM and the other parties. It is simple enough (and correct) to state that in a matrix organization, the functional manager controls who works on the project and makes technical decisions, while the project manager controls the schedule and flow of work. In practice, in the commonly hectic environment of the project, amid the day’s countless little crises faced by project and functional manager alike, the distinction is rarely clear. Finally, some conflicts reflect the fact that human beings are an integral part of all projects. In an environment that depends on the cooperation of many persons, it seems inevitable that some personalities will clash. Also, in conflicts between the project and the client, or between senior management and the project, it is the project manager who personifies the project and thus is generally a party to the conflict.
81721_Ch04.indd 170
9/16/08 12:46:41 AM
4.3 CONFLICT AND THE PROJECT LIFE CYCLE
171
We can categorize these conflicts as conflict over differing goals, over uncertainty about the locus of authority, and between personalities. For the entire array of conflict types and parties-at-interest, see Table 4-1. The three types of conflict seem to involve the parties-at-interest to the project in identifiable ways. The different goals and objectives of the project manager, senior management, and functional managers are a major and constant source of conflict. For example, senior management (at times, arbitrarily) is apt to fix all three parameters of the project—time, cost, and performance—and then to assume that the PM will be able to achieve all the preset targets. As we will see in Chapter 7 on budgeting, underestimation of cost and time is a natural consequence of this practice, and it leads directly to conflict between the PM, as a representative of the project team, and senior management. A second consequence is that the PM tries to pass the stringent cost and time estimates along to functional managers whose units are expected to perform certain work on the project. More conflict arises when the functional managers complain that they cannot meet the time and cost restrictions. All this tends to build failure into the job of managing a project, another source of conflict between the PM and senior management. Functional managers also may not see eye-to-eye with the PM on such issues as the project’s priority or the desirability of assigning a specifically named individual to work on the project, or even the applicability of a given technical approach to the project. In addition, the client’s priorities and schedule, whether an inside or outside client, may differ radically from those of senior management and the project team. Finally, the project team has its own ideas about the appropriateness of the schedule or level of project staffing. The Thamhain et al. (1975a) data show that these goal-type conflicts occur in all stages of the project’s life cycle, though they are particularly serious in the early stages (see Figure 4-1). Regardless of the timing, in many cases it is not certain just whose priorities are ruling. There are, of course, a number of methods for settling conflicts about priorities between projects, as well as intraproject conflicts. Often, the project selection model used to approve projects for funding will generate a set of projects ranked by some measure of value. It is also common for senior management to determine interproject priorities. The relative importance of the various tasks in an individual project is set by the project manager, who allocates scarce resources depending on the requirements of schedule, task difficulty, resource availability, and similar considerations. The existence of these methods for resolving priority conflicts is all too often irrelevant, because there is a powerful tendency for both project and functional managers to optimize their individual interests, with little regard for the total organization. In matrix organizations, the center of authority is particularly unclear. Locus-of-authority conflicts are endemic to matrix-organized projects. The project team and the client tend to focus on the technical procedures, debating the proper approach to the project, or perhaps how to solve individual problems that can occur at any stage. Senior management has other fish to fry. Not only do they insist that the project manager adopt and maintain a set of administrative Table 4-1 Project Conflicts by Category and Parties-at-Interest Categories of Conflict Parties-at-Interest
Project team Client Functional and senior management
81721_Ch04.indd 171
Goals
Schedules Priorities Schedules Priorities Schedules Priorities Labor Cost
Authority
Technical
Interpersonal
Personality
Technical Technical Administrative
Personality
9/16/08 12:46:42 AM
172
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
procedures that conform to organizational and legal standards, but they also are quite concerned with who reports to whom and whose permission is required to take what action. The astute reader will note that such concerns are not entirely appropriate for matrix-organized projects. Our discussions with senior managers lead us to the obvious conclusion that it is common for senior management to want the efficiency and other advantages of matrix management but simultaneously to attempt to maintain the managerial comforts of traditional hierarchical structures—a sure source of conflict. The conflict-resolution potential of partnering and project charters should be quite clear. Neither technique will stop conflicts from arising, but they will sharply lower the intensity of the conflicts as well as provide a framework for resolving conflict. They will even allow an environment in which the PM and functional managers can take positions that support the total organization rather than suboptimizing the project or the function. Project managers will often find themselves arguing for scheduling or resource priorities from functional managers who outrank them by several levels. Neither the functional nor the project managers are quite sure about who has what authority. (The reader will recall that the pure project form of organization has a tendency to breed deviant administrative behaviors, and that matrix organization is characterized by superior–subordinate confusion.) A constant complaint of project managers is “I have to take the responsibility, but I have no authority at all.” People problems arise, for the most part, within the project team, though functional managers may clash with PMs—the former accusing the latter of being “pushy,” and the latter accusing the former of “foot dragging.” In our experience, most personality clashes on the project team result from differences in technical approach or philosophy of problem solving, and in the methods used to implement the project results. Of course, it is quite possible that a personality conflict causes a technical conflict. It is also possible that any type of conflict will appear, at first blush, to be a personality clash. Next we put these conflicts into the chronological perspective of the project life cycle.
Project Formation In the initial stage of the project life cycle, most of the conflict centers around the inherent confusion of setting up a project in the environment of matrix management. Almost nothing about the project or its governance has been decided. Even the project’s technical objectives, not clearly defined or established, are apt to be understood only in the most general sense. Moving from this state of semichaos to the relatively ordered world of the buildup stage is difficult. To make this transition, four fundamental issues must be handled, although not necessarily in the order presented here. First, the technical objectives of the project must be specified to a degree that will allow the detailed planning of the buildup stage to be accomplished. Second, commitment of resources to the project must be forthcoming from senior management and from functional managers. Third, the priority of the project, relative to the priorities of the parent organization’s other projects, must be set and communicated. (Our comments about priorities at the end of Section 4.2 notwithstanding, we feel the project’s priority must be set as early as possible in the life of the project. While it will probably not save the project from delay in the event of a mandate, it stands as an important political signal to functional managers about which projects take precedence in case of resource conflicts.) Fourth, the organizational structure of the project must be established to an extent sufficient for the WBS and a linear responsibility chart, or its equivalent, to be prepared during the next stage of the life cycle. These conditions are not sufficient, but they are most certainly necessary if the conflicts typical of the formation stage are to be resolved—at least at a reasonable level—and not simply carried forward to the buildup stage in an exacerbated state.
81721_Ch04.indd 172
9/16/08 12:46:42 AM
4.3 CONFLICT AND THE PROJECT LIFE CYCLE
173
The project manager who practices conflict avoidance in this stage is inviting disaster in the next. The four fundamental issues above underlie such critical but down-to-earth matters as these: Which of the functional areas will be needed to accomplish project tasks? What will be the required level of involvement of each of the functional areas? How will conflicts over resources/facility usage between this and other projects be settled? What about those resource/facility conflicts between the project and the routine work of the functions? Who has the authority to decide the technical, scheduling, personnel, and cost questions that will arise? Most important, how will changes in the parent organization’s priorities be communicated to everyone involved? Note that three of the four fundamental issues—delimiting the technical objectives, getting management commitment, and setting the project’s relative priority—must be resolved irrespective of what organizational form is selected for the project. It should also be noted that the organizational structure selected will have a major impact on the ways in which the conflicts are handled. The stronger the matrix, having the pure project as its limit, the more authoritative the role played by the PM. The weaker the matrix, having functional organization as its limit, the more authority is embedded in the functional managers. Lack of clarity about the relative power/influence/authority of the PM and the functional managers is a major component of all conflicts involving technical decisions, resource allocation, and scheduling.
Project Buildup Thamhain et al. (1975a, p. 39) note that conflict occurring in the buildup stage “over project priorities, schedules, and administrative procedures . . . appears as an extension from the previous program phase.” This is the period during which the project moves (or should move) from a general concept to a highly detailed set of plans. If the project’s organizational format is a strong matrix, the PM seeks a commitment of people from the functional departments. If the project is organized as a weak matrix, the PM seeks a commitment of work from the functional departments. In either case, the PM seeks commitment from functional managers who are under pressure to deliver support to other projects, in addition to the routine, everyday demands made on their departments. As the project’s plans become detailed, conflicts over technical issues build—again, conflicts between the PM and the functional areas tend to predominate. Usually, the functional departments can claim more technical expertise than the PM, who is a “generalist.” On occasion, however, the PM is also a specialist. In such situations, discussions between the functional manager and the project manager about the best technical approach often result in conflict. The total level of conflict is at its highest in this transition period.
Main Program Schedules are still a major source of conflict in the main program phase of the project life cycle, though the proximate cause of schedule-related conflict is usually different than in the earlier stages. Project plans have been developed and approved by everyone involved (although, perhaps, grudgingly), and the actual work is under way. Let us make an assumption that is certain to be correct; let us assume that some activity runs into difficulty and is late in being completed. Every task that is dependent on this late activity will also be delayed. Some of these subsequent activities will, if sufficiently late and if the late work is not made up, delay the entire project. In order to prevent this consequence, the PM must try to get the schedule back on track. But catching up is considerably more difficult than falling behind. Catching up requires extra resources that the functional groups who are doing the “catching up” will demand, but which the PM may not have.
81721_Ch04.indd 173
9/16/08 12:46:42 AM
174
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
The more complex the project, the more difficult it is to trace and estimate the impact of all the delays, and the more resources that must be consumed to get things back on schedule. Throughout this book we have referred to the PM’s job of managing time/cost/performance trade-offs. Maintaining the project schedule is precisely an exercise in managing trade-offs, but adding to the project’s cost or scaling down the project’s technical capabilities in order to save time are trade-offs the PM will not take if there is any viable alternative. The PM’s ability to make trade-offs is often constrained by contract, company policy, and ethical considerations. In reality, trade-off decisions are extremely difficult. Like schedule conflicts, technical conflicts are frequent and serious during the main program stage. Also like schedule conflicts, the source of technical conflict is somewhat different than in earlier stages. Just as a computer and a printer must be correctly linked together in order to perform properly, so must the many parts of a project. These linkages are known as interfaces. The number of interfaces increases rapidly as the project gets larger, which is to say that the system gets more complex. As the number of interfaces increases, so does the probability that problems will arise at the interfaces. The need to manage these interfaces and to correct incompatibilities is the key to the technical conflicts in the main program phase.
Project Phase-out As in the main program stage, schedule is the major source of conflict during project phaseout. If schedule slippage has occurred in the main program stage (and it probably has), the consequences will surely be felt in this final stage. During phase-out, projects with firm deadlines develop an environment best described as hectic. The PM, project team, and functional groups often band together to do what is necessary to complete the project on time and to specification. Cost overruns, if not outrageously high, are tolerated—though they may not be forgiven and they will certainly be remembered. Technical problems are comparatively rare during phase-out because most have been solved or bypassed earlier. Similarly, working interfaces have been developed and put in place. If the project involves implementing a technology in an outside client’s system, technical conflicts will probably arise, but they are usually less intense. Thamhain et al. (1975b, p. 41) note that personality conflicts are the second-ranked source of conflict during phase-out. They ascribe these conflicts to interpersonal stress caused by the pressure to complete the project, and to individuals’ natural anxiety about leaving the project either to be assigned to another, or be returned to a functional unit. In addition, we have observed conflict, sometimes quite bitter, focused on the distribution of the project’s capital equipment and supplies when the project is completed. Conflict also arises between projects phasing out and those just starting, particularly if the latter need resources or personnel with scarce talents being used by the former. The way in which Thamhain et al. have defined conflict as having its source in differences about goals/expectations, uncertainty about authority, and interpersonal problems, precludes identifying conflict as occurring between discipline-oriented and problem-oriented team members. Recall our discussions of Hughes (1998) and de Laat (1994). We do not argue that Thamhain et al. are in error, but merely that their classification does not specifically include a type of conflict we feel is both frequent and important. Much of the conflict identified during our discussion of planning in Chapter 6, it seems to us, is due to discipline/problem-orientation differences. A clear example comes from an interview recorded during Pelled et al.’s (1994, p. 23) research on conflict in multifunctional design teams. One team member speaking of another said, “He will do whatever he thinks is right to get his [own] job done, whether or not it’s good for [the company] or anyone else.” In context, it is clear that this conflict was between a problem-oriented individual and one who was discipline oriented.
81721_Ch04.indd 174
9/16/08 12:46:42 AM
4.3 CONFLICT AND THE PROJECT LIFE CYCLE
175
The upshot is simple. As we noted in the first section of Chapter 1, conflict is an inherent characteristic of projects, and the project manager is constantly beset by conflict. The ability to reduce and resolve conflict in ways that support achievement of the project’s goals is a prime requisite for success as a PM. The primary tool to accomplish conflict resolution and reduction is negotiation, and the method of handling conflict established in the project formation stage will set the pattern for the entire project. Therefore, the style of negotiation adopted by the PM is critical. Much has been written on conflict resolution. Burke’s classic paper on the confrontationproblem solving method of resolving conflicts is offered as a “Reading” at the end of this chapter. The similarities between the confrontation-problem solving technique for conflict resolution and win-win negotiation covered in the following section are quite striking.
Project Management in Practice A Consensus Feasibility Study for Montreal’s Archipel Dam
To assess the desirability of a feasibility study evaluating the costs and benefits of constructing a dam for watershed development within the St. Lawrence river basin in the Montreal metropolitan area, Quebec initiated an interdepartmental evaluation. The evaluation concluded that a feasibility study that considered the hydroelectric power generated, the flood control possible, and the shoreline restoration for recreation for the 3 million local area residents was justified. It was recommended that a central authority act as project manager for the study and that arbitration procedures be instituted for the interests of all affected parties. Thus, a new body called “Secretariat Archipel” was created to directly supervise the feasibility study. Secretariat Archipel, however, rejected the recommendations of the prior evaluation and chose to use a more democratic “consensus” approach between all involved agencies rather than a central authority approach. Doing so avoided the need for arbitration procedures as well. In addition, a matrix structure was put in place to guarantee a veto right to each of the ten governmental departments involved in the process. It was believed that this consensus approach would lead to a solution acceptable to all, while protecting the jurisdictional responsibilities of all departments. Although this approach apparently avoided difficult conflicts, and the concomitant need to arbitrate them, a post-study evaluation of the process concluded that it was neither effective nor efficient. By discarding the
81721_Ch04.indd 175
recommendation for a central authority body, a leadership gap arose in the decision framework and veto rights were abused by many of the participants. The leadership gap led, for example, to no one identifying incompatible objectives, rules for making decisions, or common priorities. In terms of effectiveness, the recommendations of the study are questionable: that the dam be postponed until the year 2015 while only $35 million—less than the cost of the feasibility study—be spent on recreational facilities. Considering efficiency, it was found that many of the expensive support studies authorized by the Secretariat did not add significantly to the feasibility process. Also, the study appeared to take one to two years longer than necessary, with a correspondingly higher cost. The evaluation proposed three probable causes of the lack of decisiveness in this study process: 1. Fear of litigation between the governmental departments and municipalities, 2. Difficulty comparing positive and negative impacts due to a lack of decision rules, and 3. Long delays and unavoidable sacrifices through a failure of the consensus process. In retrospect, the consensus approach appeared to have been selected to protect the fields of jurisdiction of each governmental department rather than for defining the best project for the community. Since many of the goals were incompatible to start with, a consensual
9/16/08 12:46:43 AM
176
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
decision process with veto override would simply have to reject any recommendation—no matter how appropriate for the community—that was incompatible with another goal or disliked by any of the ten departments involved in the study. Although consensus is a highly desirable goal for public studies, leadership cannot be abandoned in the process. Attempting to avoid conflict
4.4
through mandated consensus simply defeats the purpose of any study in the first place, except a study to determine what everyone commonly agrees upon. Source: R. Desbiens, R. Houde, and P. Normandeau, “Archipel Feasibility Study: A Questionable Consensus Approach,” Project Management Journal, March 1989.
SOME REQUIREMENTS AND PRINCIPLES OF NEGOTIATION The word “negotiation” evokes many images: the United States President and Congress on the annual federal budget, the “Uruguay Round” of the GATT talks, a player’s agent and the owner of an NFL team, the buyer and seller of an apartment complex, attorneys for husband and wife in a divorce settlement, union and management working out a collective bargaining agreement, tourist and peddler haggling over a rug in an Ankara market. But as we noted in the introduction to this chapter, none of these images is strictly appropriate for the project manager who must resolve the sorts of conflicts we have considered in the previous section. The key to understanding the nature of negotiation as it applies to project management is the realization that few of the conflicts arising in projects have to do with whether or not a task will be undertaken or a deliverable produced. Instead, they have to do with the precise design of the deliverable and/or how the design will be achieved, by whom, when, and at what cost. The implication is clear: The work of the project will be done. If conflicts between any of the parties to the project escalate to the point where negotiations break down and work comes to a halt, everyone loses. One requirement for the conflict reduction/resolution methods used by the PM is that they must allow the conflict to be settled without irreparable harm to the project’s objectives. A closer consideration of the attorneys negotiating the divorce settlement makes clear a second requirement for the PM negotiating conflicts between parties-at-interest to the project. While the husband and wife (or the rug peddler and tourist) may employ unethical tactics during the negotiation process and, if not found out, profit from them at the expense of the other party, it is much less likely for the attorneys representing the husband and wife to do so—particularly if they practice law in the same community. The lawyers know they will have to negotiate on other matters in the future. Any behavior that breeds mistrust will make future negotiations extremely difficult, perhaps impossible. The rug peddler assumes no further contact with the tourist, so conscience is the sole governor of his or her ethics. A second requirement for the conflict resolution/reduction methods used by the PM is that they allow (and foster) honesty between the negotiators. The conflicting parties-at-interest to a project are not enemies or competitors, but rather allies—members of an alliance with strong common interests. It is a requirement of all conflicting parties to seek solutions to the conflict that not only satisfy their own individual needs, but also satisfy the needs of other parties to the conflict, as well as the needs of the parent organization. In the language of negotiation, this is called a “win-win” solution. Negotiating to a win-win solution is the key to conflict resolution in project management. Fisher et al. (1983, p. 11) have developed a negotiation technique that tends to maintain these three requirements. They call it “principled negotiation,” that is, win-win. The method is straightforward; it is defined by four points.
81721_Ch04.indd 176
9/16/08 12:46:43 AM
4.4 SOME REQUIREMENTS AND PRINCIPLES OF NEGOTIATION
177
1. Separate the people from the problem. The conflicting parties are often highly emotional. They perceive things differently and feel strongly about the differences. Emotions and objective fact get confused to the point where it is not clear which is which. Conflicting parties tend to attack one another rather than the problem. To minimize the likelihood that the conflict will become strictly interpersonal, the substantive problem should be carefully defined. Then everyone can work on it rather than each other. 2. Focus on interests, not positions. Positional bargaining occurs when the PM says to a functional manager: “I need this subassembly by November 15.” The functional manager responds: “My group can’t possibly start on it this year. We might be able to deliver it by February 1.” These are the opening lines in a dialogue that sounds suspiciously like the haggling of the tourist and the rug peddler. A simple “Let’s talk about the schedule for this subassembly” would be sufficient to open the discussion. Otherwise each party develops a high level of ego involvement in his or her position and the negotiation never focuses on the real interests and concerns of the conflicting parties—the central issues of the conflict. The exchange deteriorates into a series of positional compromises that do not satisfy either party and leave both feeling that they have lost something important. In positional negotiation, the “positions” are statements of immediate wants and assume that the environment is static. Consider these positional statements: “I won’t pay more than $250,000 for that property.” Or, as above, “We might be able to deliver it by February 1.” The first position assumes that the bidder’s estimates of future property values are accurate, and the second assumes that the group’s current workload (or a shortage of required materials) will not change. When negotiation focuses on interests, the negotiator must determine the underlying concern of the other party. The real concerns or interests of the individuals stating the positions quoted above might be to earn a certain return on the investment in a property, or to not commit to delivery of work if delivery on the due date cannot be guaranteed. Knowledge of the other party’s interests allows a negotiator to suggest solutions that satisfy the other party’s interests without agreeing with the other’s position. 3. Before trying to reach agreement, invent options for mutual gain. The parties-in-conflict usually enter negotiations knowing the outcome they would like. As a result, they are blind to other outcomes and are not particularly creative. Nonetheless, as soon as the substantive problems are spelled out, some effort should be devoted to finding a wide variety of possible solutions— or elements thereof—that advance the mutual interests of the conflicting parties. Success at finding options that produce mutual gain positively reinforces win-win negotiations. Cohen (1980) reports on a conflict between a couple in which “he” wanted to go to the mountains and “she” wanted to go to the shore. A creative win-win solution sent them both to Lake Tahoe. 4. Insist on using objective criteria. Rather than bargaining on positions, attention should be given to finding standards (e.g., market value, expert opinion, law, company policy) that can be used to determine the quality of an outcome. Doing this tends to make the negotiation less a contest of wills or exercise in stubbornness. If a functional manager wants to use an expensive process to test a part, it is acceptable for the PM to ask if such a process is required to ensure that the parts meet specified quality standards. Fisher et al. (1983) have had some success with their approach in the Harvard (Graduate School of Business) Negotiation Project. Use of their methods increases the chance of finding win-win solutions. There are many books on negotiation, some of which are listed in the bibliography of this chapter. Most of these works are oriented toward negotiation between opponents, not an appropriate mindset for the project manager, but all of them contain useful, tactical advice for the project manager. Wall’s book (1985) is an excellent academic treatment of the subject. Fisher et al. (1983) is a clear presentation of principled negotiation, and contains much that is relevant
81721_Ch04.indd 177
9/16/08 12:46:43 AM
178
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
PMBOK Guide
to the PM. In addition, Herb Cohen’s You Can Negotiate Anything (1980) is an outstanding guide to win-win negotiation. The importance of negotiation is beginning to be recognized by the project management profession (Dodson, 1998; Grossman, 1995; Long, 1997; and Robinson, 1997), but the subject has not yet found its way into the Project Management Body of Knowledge. Among the tactical issues covered by most books on negotiation are things the project manager, as a beginning negotiator, needs to know. For example, what should a negotiator who wishes to develop a win-win solution do if the other party to the conflict adopts a win-lose approach? What do you do if the other party tries to put you under psychological pressure by seating you so that a bright light shines in your eyes? What do you do if the other party refuses to negotiate in order to put you under extreme time pressure to accept whatever solution he or she offers? How do you settle what you perceive to be purely technical disputes? How should you handle threats? What should be your course of action if a functional manager, with whom you are trying to reach agreement about the timing and technology of a task, goes over your head and attempts to enlist the aid of your boss to get you to accept a solution you feel is less than satisfactory? How can you deal with a person you suspect dislikes you? Almost every writer on negotiation emphasizes the importance of understanding the interests of the person with whom you are negotiating. As we noted above, the positions taken by negotiators are not truly understandable without first understanding the interests and concerns that prompt those positions. The statement that a test requested for May 15 cannot be run until June 2 may simply mean that the necessary test supplies will not be delivered until the latter date. If the PM can get the supplies from another source in time for the May 15 deadline, the test can be run on schedule. But the ability to do this depends on knowing why the test was to be delayed. If the negotiation remains a debate on positions, the PM will never find out that the test could have been run on time. The key to finding a negotiator’s interests and concerns is to ask “Why?” when he or she states a position. The following vignette demonstrates the maintenance of a nonpositional negotiating style. This vignette is based on an actual event and was described to the authors by an “actor” in the case.
Project Management in Practice Negotiation in Action—The Quad Sensor Project
Dave Dogers, an experienced project manager, was assigned the project of designing and setting up a production system for an industrial instrument. The instrument would undoubtedly be quite delicate, so the design and fabrication methods for the shipping container were included in the project. Production of containers capable of meeting the specifications in this case were outside the experience of the firm, but one engineer in the container group had worked with this type of package in a previous job. This engineer, Jeff Gamm, was widely recognized as the top design engineer in the container group. During the initial meetings on the project, which was organized as a weak matrix, Dogers asked Tab
81721_Ch04.indd 178
Baturi, manager of the Container Group, to assign Gamm to the project because of his unique background. Baturi said he thought they could work it out, and estimated that the design, fabrication of prototypes, and testing would require about four weeks. The package design could not start until several shape parameters of the instrument had been set and allowable shock loadings for the internal mechanisms had been determined. The R&D group responsible for instrument design thought it would require about nine months of work before they could complete specifications for the container. In addition to the actual design, construction, and test work, Gamm would have to meet periodically with the instrument design team to keep
9/16/08 12:46:43 AM
4.4 SOME REQUIREMENTS AND PRINCIPLES OF NEGOTIATION
track of the project and to consult on design options from the container viewpoint. It was estimated that the entire project would require about 18 months. Seven months into the project, at a meeting with Dave Dogers, the senior instrument design engineer, Richard Money, casually remarked: “Say, Dave, I thought Jeff Gamm was going to do the package for the Quad Sensor.” “He is, why?” Dogers replied. “Well,” said the engineer, “Gamm hasn’t been coming to the design team meetings. He did come a couple of times at the start of the project, but then young McCutcheon showed up saying that he would substitute for Gamm and would keep him informed. I don’t know if that will work. That package is going to be pretty tricky to make.” Dogers was somewhat worried by the news the engineer had given him. He went to Gamm’s office, as if by chance, and asked, “How are things coming along?” “I’m up to my neck, Dave,” Gamm responded. “We’ve had half a dozen major changes ordered from Baker’s office (V.P. Marketing) and Tab has given me the three toughest ones. I’m behind, getting behinder, and Baker is yelling for the new container designs. I can’t possibly do the Quad Sensor package unless I get some help—quick. It’s an interesting problem and I’d like to tackle it, but I just can’t. I asked Tab to put McCutcheon on it. He hasn’t much experience, but he seems bright.” “I see,” said Dogers. “Well, the Quad Sensor package may be a bit much for a new man. Do you mind if I talk to Tab? Maybe I can get you out from under some of the pressure.” “Be my guest!” said Gamm. The next day Dogers met with Tab Baturi to discuss the problem. Baturi seemed depressed. “I don’t know what we’re supposed to do. No sooner do I get a package design set and tested than I get a call changing things. On the Evans order, we even had production schedules set, had ordered the material, and had all the setups figured out. I’m amazed they didn’t wait till we had completed the run to tell us to change everything.” Baturi continued with several more examples of changed priorities and assignments. He complained that he had lost two designers and was falling further and further behind. He concluded: “Dave, I know I said you could use Gamm for the Quad Sensor job, but I simply can’t cut him loose. He’s my most productive person, and if anyone can get us out from under this mess, he can. I know McCutcheon is just
81721_Ch04.indd 179
179
out of school, but he’s bright. He’s the only person I can spare, and I can only spare him because I haven’t got the time to train him on how we operate around here—if you can call this ‘operating.’ ” The two men talked briefly about the poor communications and the inability of senior management to make up its collective mind. Then Dogers suggested, “Look, Tab, Quad Sensor is no more screwed up than usual for this stage of the project. How about this? I can let you borrow Charlotte Setter for three or four weeks. She’s an excellent designer and she’s working on a low-priority job that’s not critical at the moment. Say, I’ll bet I can talk Anderson into letting you borrow Levy, too, maybe half time for a month. Anderson owes me a favor.” “Great, Dave, that will help a lot, and I appreciate the aid. I know you understand my problem and you know that I understand yours.” Baturi paused and then added, “You realize that this won’t take much pressure off Jeff Gamm. If you can get him the designing help he needs he can get more done, but I can’t release him for the amount of time you’ve got allocated for the Quad Sensor.” They sat quietly for a while, then Dogers said, “Hey, I’ve got an idea. Container design is the hard problem. The production setup and test design isn’t all that tough. Let me have Gamm for the container design. I’ll use McCutcheon for the rest of the project and get him trained for you. I can get Carol Mattson to show him how to set up the shock tests and he can get the word on the production setup from my senior engineer, Dick Money. Baturi thought a moment. “Yeah, that ought to work,” he said. “But Gamm will have to meet with your people to get back up to speed on the project. I think he will clean up Baker’s biggest job by Wednesday. Could he meet with your people on Thursday?” “Sure, I can arrange that,” Dogers said. Baturi continued. “This will mean putting two people on the package design. McCutcheon will have to work with Gamm if he is to learn anything. Can your budget stand it?” “I’m not sure,” Dogers said, “I don’t really have any slack in that account, but . . . ” “Never mind,” interrupted Baturi, “I can bury the added charge somewhere. I think I’ll add it to Baker’s charges. He deserves it. After all, he caused our problem.” Source: S. J. Mantel, Jr. Consulting Project, 2004.
9/16/08 12:46:44 AM
180
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
SUMMARY This chapter addressed the need for negotiation as a tool to resolve project conflicts. We discussed the nature of negotiation and its purpose in the organization. We also described various categories of conflict and related them to the project life cycle. We followed this by identifying a number of requirements and principles of negotiation. Finally, we presented a short vignette illustrating an actual negotiation situation. Specific points made in the chapter were these:
•
Negotiation within the firm should be directed at obtaining the best outcome for the organization, not winning.
•
There are three traditional categories of conflict: goal-oriented, authority-based, and interpersonal.
•
There are also three traditional sources of conflict. They are the project team itself, the client, and functional and senior management. We added the problem/discipline orientation of people working on the project.
•
Critical issues to handle in the project formation stages are delimiting technical objectives, getting management commitment, setting the project’s rela-
• • •
•
tive priority, and selecting the project organizational structure. The total level of conflict is highest during the project buildup stage. Scheduling and technical conflicts are most frequent and serious in the project buildup and main program stages, and scheduling conflicts in particular during the phase-out stage. Project negotiation requirements are that conflicts must be settled without permanent damage, the methodology must foster honesty, and the solution must satisfy both individuals’ and the organization’s needs. One promising approach to meeting the requirements of project negotiation is called “principled negotiation.”
In the next chapter we move to the first task of the PM, organizing the project. We deal there not only with various organizational forms, such as functional, project, and matrix, but also with the organization of the project office. This task includes setting up the project team and managing the human element of the project.
GLOSSARY Interfaces The boundaries between departments or functions. Lateral Relations Communications across lines of equivalent authority. Pareto-Optimal Solution A solution such that no party can be made better off without making another party worse off by the same amount or more.
Positional Negotiation Stating immediate wants on the assumption that the environment is static. Principled Negotiation A process of negotiation that aims to achieve a win-win result. Parties-at-interest Those who have a vested interest in the outcome of the negotiations. Win-win When both parties are better off in the outcome.
QUESTIONS Material Review Questions 1. Review and justify the placement of the seven types of
5. Describe the four points of principled negotiation.
conflicts into the nine cells of Table 4-1. 2. Discuss each of the four fundamental issues for potential conflict during the project formation stage. 3. Identify the types of likely conflicts during the project buildup, main program, and phaseout stages. 4. What are the three main requirements of project negotiation?
6. What is the objective of negotiation?
81721_Ch04.indd 180
7. What are the four categories of conflict? 8. What is “principled negotiation”?
9/16/08 12:46:44 AM
INCIDENTS FOR DISCUSSION
181
Class Discussion Questions 9. Summarize the vignette in the chapter in terms of the
14. The critical term in the concept of principled negotia-
negotiation skill used. Comment on the appropriateness and ethical aspects related to “burying” the cost. What will be the likely result of a win-win style manager negotiating with a win-lose style manager? What if they are both win-lose styled? Reallocate the placement of the seven types of conflicts into the nine cells of Table 4-1 according to your own logic. How does the type of project organization affect each of the types of conflicts that occur over the project life cycle? Project managers are primarily concerned with project interfaces. At what rate do these interfaces increase with increasing project size?
tion is “position.” Elaborate on the multiple meanings of this term relative to negotiation. Can you think of a better term?
10.
11.
12.
13.
15. Give an example of a Pareto-optimal solution in a con-
flict. 16. Given that many conflicts are the result of different parties having different interests, is it possible to achieve a win-win situation? 17. The chairman of Cadbury Schweppes PLC, G.A.H. Cadbury suggests (1987) the following test for an ethical action: Would you be embarrassed to have it described in the newspaper? Is this a sufficient test for ethics? Can you think of any others?
Questions for Project Management in Practice Selling New Area Codes to Consumers Who Don’t Want Them 18. Did BellSouth’s customers want new area codes or not?
20. BellSouth employed a number of measures to com-
What was the true nature of the problem here? 19. Why did BellSouth have to change all the area codes instead of simply using the new codes for the new devices?
municate the need for change. In the end, what was probably the main reason their customers accepted the change?
A Consensus Feasibility Study for Montreal’s Archipel Dam
Negotiation in Action—The Quad Sensor Project
21. Given the results of the study, did the consensus
24. What categories of conflict occurred in this project? At
approach indeed lead to a solution acceptable to all? Why wasn’t everyone happy with this outcome? 22. Based on this case situation, does the consensus approach lead to what is best for the overall community? Why (not)? 23. What approach should have been adopted to determine what was best for the overall community?
what stage was the project? 25. What negotiation techniques were used here? How successful were they?
INCIDENTS FOR DISCUSSION Pritchard Soap Co.
Samantha (“Sam”) Calderon is manager of a project that will completely alter the method of adding perfume to Pritchard Soap’s “Queen Elizabeth” gift soap line. The new process will greatly extend the number of available scents and should result in a significant increase in sales. The project had been proceeding reasonably well, but fell several weeks behind when the perfume supplier, the Stephen Marcus Parfumissary, was unable to meet its delivery deadline because of a wildcat strike. Under normal circumstances this would not have caused problems, but the project had been subject to a particularly
81721_Ch04.indd 181
long evaluation study and now was in danger of not being ready for the Christmas season. The major scheduling problem concerned Pritchard’s toxicity lab. Kyle Lee, lab manager, had been most cooperative in scheduling the Queen Elizabeth perfumes for toxicity testing. He had gone out of his way to rearrange his own schedule to accommodate Sam’s project. Because of the strike at Marcus, however, Sam cannot have the perfumes ready for test as scheduled, and the new test date Lee has given Sam will not allow her to make the new line available by Christmas. Sam suspects that the project might not have been approved if senior management had known that they would miss this year’s Christmas season.
9/16/08 12:46:44 AM
182
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
Questions: What was the source of change in this project and how will it affect the project’s priority? What are Sam’s alternatives? What should she do? Sutton Electronics
Eric Frank was still basking in the glory of his promotion to marketing project manager for Sutton Electronics Corporation, manufacturer of electronic fire alarm systems for motels, offices, and other commercial installations. Eric’s first project involved the development of a marketing plan for Sutton’s revolutionary new alarm system based on sophisticated circuitry that would detect and identify a large number of dangerous gases as well as smoke and very high temperatures. The device was the brainchild of Ira Magee, vice-president of research and the technical wizard responsible for many of Sutton’s most successful products. It was unusual for so young and relatively inexperienced an employee as Eric to be given control of such a potentially important project, but he had shown skill in handling several complex, though routine, marketing assignments. In addition, he had the necessary scientific background to
allow him to understand the benefits of Magee’s proposed gas detection system. Four weeks into the project, Eric was getting quite worried. He had tried to set up an organizational and planning meeting several times. No matter when he scheduled the meeting, the manager of the manufacturing department, Jaki Benken, was unable to attend. Finally, Eric agreed that manufacturing could be represented by young Bill Powell, a Benken protégé who had just graduated from college and joined Sutton Electronics. However, Eric was doubtful that Powell could contribute much to the project. Eric’s worry increased when Powell missed the first planning meeting completely and did not appear at the second meeting until it was almost over. Powell seemed apologetic and indicated that plant floor crises had kept him away from both meetings. The project was now five weeks old, and Eric was almost three weeks late with the marketing master plan. He was thinking about asking Ira Magee for help. Questions: Do you think that Eric should involve Magee at this point? If so, what outcome would you expect? If not, what should he do?
CONTINUING INTEGRATIVE CLASS PROJECT The topic of negotiation will come up in two guises during the class project: When the PM is trying to assign tasks to the class members and they are resisting, and also possibly when the PM or class is negotiating for resources with the Instructor, the Dean, or others. The topic of conflict can arise at any time and over any issue, obviously.
In all these circumstances, the individuals would be well advised to recall the principles of negotiation (or quickly refer back to this chapter). The class historian should also be noting when conflicts and bargaining occurred during the project, as well as its nature, and resolution.
BIBLIOGRAPHY Adams, J. R., and S. E. Barndt. “Behavorial Implications of the Project Life Cycle.” In D. I. Cleland and W. R. King, eds., Project Management Handbook. New York: Van Nostrand Reinhold, 1983. Afzalur, R. M. Managing Conflict in Organizations. Westport, CT: Praeger, 1992. Baker, K. R. “Measuring the Benefits of Partnering.” PM Network, June 1996. Beecham, M. A., and M. Cordey-Hayes. “Partnering and Knowledge Transfer in the U.K. Motor Industry.” Technovation, March 1998. Cadbury, G. A. H. “Ethical Managers Make Their Own Rules.” Harvard Business Review, September–October 1987. Cohen, H. You Can Negotiate Anything. Secaucus, NJ: Lyle Stuart Inc., 1980.
81721_Ch04.indd 182
Cowen, C., C. Gray, and E. W. Larson. “Project Partnering.” Project Management Journal, December 1992. de Laat, P. B. “Matrix Management of Projects and Power Struggles: A Case Study of an R&D Laboratory.” IEEE Engineering Management Review, Winter 1995, reprinted from Human Relations, Vol. 47, No. 9, 1994. Fisher, R., and W. Ury. Getting to Yes. Harmondsworth, Middlesex, G.B.: Penguin Books, 1983. Grossman, J. “Resolve Conflicts So Everybody Wins.” PM Network, September 1995. Hughes, T. P. Rescuing Prometheus, New York: Pantheon, 1998. Larson, E. W., and J. A. Drexler, Jr. “Barriers to Project Partnering: Reports from the Firing Line.” Project Management Journal, March 1997.
9/16/08 12:46:45 AM
DIRECTED READING
Long, A. “Negotiating the Right Decision.” PM Network, December 1997. Moore, C. C., J. D. Maes, and R. A. Shearer. “Recognizing and Responding to the Vulnerabilities of Partnering.” PM Network, September 1995. Pelled, L. H., and P. S. Adler. “Antecedents of Intergroup Conflict in Multifunctional Product Development Teams: A Conceptual Model.” IEEE Transactions on Engineering Management, February 1994. Raiffa, H. The Art and Science of Negotiation. Cambridge: Belknap/Harvard Press, 1982. Robinson, T. “When Talking Makes Things Worse!” PM Network, March 1997. ROGET’S International Thesaurus. New York: Thomas Y. Crowell, 1993. Rosegger, G., and S. J. Mantel, Jr. “Competitors as Consultants: Collaboration and Technological Advance.”
183
J. Allesch (Ed.), Consulting in Innovation: PracticeMethods-Perspectives, Amsterdam: Elsevier, 1990. Smith, M. B. “Financial Constraints on Service and Outsourcing Projects.” PM Network, October 1998. Thamhain, H. J., and D. L. Wilemon. “Conflict Management in Project Life Cycles.” Sloan Management Review, Summer 1975a. Thamhain, H. J., and D. L. Wilemon. “Diagnosing Conflict Determinants in Project Management.” IEEE Transactions on Engineering Management, February 1975b. Thomas, K. “Conflict and Conflict Management.” In M. D. Dunnette (Ed.), Handbook of Industrial and Organizational Psychology, Chicago: Rand McNally, 1976. Wall, J. A., Jr. Negotiation: Theory and Practice. Glenview, IL: Scott, Foresman, 1985.
The following classic article describes a number of methods for negotiating and handling conflicts. The author identifies effective and ineffective methods ranging from withdrawal to forcing. Each method is then illustrated with a number of examples. Finally, the most effective method, Confrontation Problem Solving, is described in terms of its many characteristics.
D I R E C T E D
R E A D I N G
METHODS OF RESOLVING INTERPERSONAL CONFLICT* R. J. Burke
The management of conflict in creative and useful ways, rather than its containment or abolition, has been proposed by many writers. Various strategies for dealing with conflict at different levels and for managing disagreements have also been proposed. Most of these methods have not been experimentally evaluated. Given the central and inevitable role of conflict in human affairs, a high priority of importance is to be placed on learning the most effective way to resolve it.
Purpose of This Study In a previous investigation, Burke (1969a) collected questionnaire data from 74 managers, in which they described *Methods of Resolving Interpersonal Conflict. Personnel Administration, July–August 1969. © 1969 by the International Personnel Management Association. Reprinted by permission.
81721_Ch04.indd 183
the way they and their superiors dealt with conflict between them. It was possible to relate five different methods of conflict resolution originally proposed by Blake and Mouton (1964)—Withdrawing, Smoothing, Compromising, Forcing, and Confrontation or Problem Solving—to two major areas of the superior-subordinate relationship. These were (1) constructive use of differences and disagreements, and (2) several aspects of the superior-subordinate relationship in planning job targets and evaluating accomplishments. In general, the results showed that Withdrawing and Forcing behaviors were consistently negatively related to these two areas. Compromising was not related to these two areas. Use of Smoothing was inconsistently related, sometimes positive and sometimes negative. Only ConfrontationProblem Solving was always related positively to both. That is, use of Confrontation was associated with constructive use of differences and high scores on various measures of the superior-subordinate relationship.
9/16/08 12:46:45 AM
184
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
This study has the dual purpose of attempting to specify more precisely the characteristics of the ConfrontationProblem Solving method of conflict resolution, and replicating the earlier study (Burke, 1969a) using different methodology.
Method Subjects: The respondents were managers from various organizations who were enrolled in a university course emphasizing behavioral science concepts relevant to the functions of management. Their organizational experience ranged from one year to over 30 years. Procedure: Each respondent was asked to describe a time when he felt particularly GOOD (or BAD) about the way in which an interpersonal conflict was resolved. The specific instructions stated: “Think of a time when you felt especially GOOD (or BAD) about the way an interpersonal conflict or disagreement (e.g., boss-subordinate, peer-peer, etc.) in which you were involved was resolved. It may have been on your present job, or any other job, or away from the work situation. “Now describe it in enough detail so a reader would understand the way the conflict or differences were handled.” This statement appeared at the top of a blank sheet of paper. Approximately half the respondents were first to describe the instance when they felt particularly good, followed by the instance when they felt particularly bad. The remaining respondents described the instances in the reverse order. No apparent effects were observed from the change in order, so the data from both groups will be considered together in this report.
4. Forcing—a win-lose situation; participants are antagonists, competitors, not collaborators. Fixed positions, polarization. Creates a victor and a vanquished. 5. Confrontation-Problem Solving—open exchange of information about the conflict or problem as each sees it, and a working through of their differences to reach a solution that is optimal to both. Both can win. Table 1 presents the method of conflict resolution associated with effective resolution (left half of Table 1) and ineffective resolution (right half of Table 1). Considering the left half of the table, Confrontation-Problem Solving was the most common method for effective resolution (58.5%), followed by Forcing (24.5%), and Compromise (11.3%). The prominence of Confrontation as an effective method is consistent with the earlier study (Burke, 1969a) but the value for Forcing was higher than expected. When these 13 cases are considered as a group, 11 of them are similar in that the party providing the written description benefited as a result of the Forcing. That is, Forcing was perceived as an effective method of resolving conflict by the victor, but not by the vanquished. Moving to the right half of Table 1, Forcing was the most commonly used method for ineffective resolution, followed in second place by Withdrawal with only 9.4 percent. The vast majority of individuals providing written descriptions of Forcing methods were victims or “losers” as a result of Forcing behavior. In summary, the major differences in methods of conflict resolution found to distinguish effective versus in effective examples were: (1) significantly greater use of Confrontation in the effective examples (58.5% vs. 0.0%); (2) significantly less use of Forcing in the effective examples
Results Fifty-three descriptions of effective resolution of conflict (felt especially GOOD) and 53 descriptions of ineffective resolutions of conflict (felt especially BAD) were obtained. These were provided by 57 different individuals. Some individuals provided only one example. The response rate was about 70 percent of the total available population. The written descriptions were then coded into one of the five methods of conflict resolution proposed by Blake and Mouton (1964). 1. Withdrawing—easier to refrain than to retreat from an argument; silence is golden. “See no evil, hear no evil, speak no evil.” 2. Smoothing—play down the differences and emphasize common interests; issues that might cause divisions or hurt feelings are not discussed. 3. Compromising—splitting the difference, bargaining, search for an intermediate position. Better half a loaf than none at all; no one loses but no one wins.
81721_Ch04.indd 184
Table 1. Methods Associated with Effective and Ineffective Conflict Resolution
Withdrawal Smoothing Compromise Forcing Confrontationproblem solving Other (still unresolved; unable to determine how resolved; irrelevant to assignment; etc.)
Effective Resolution (N ⴝ 53) N %
Ineffective Resolution (N ⴝ 53) N %
0 0 6 13
0.0* 0.0 11.3 24.5*
5 1 3 42
9.4* 1.9 5.7 79.2*
31
58.5*
0.0*
3
5.7
2
3.8
*Percentage difference between groups is significant at the .05 level of confidence.
9/16/08 12:46:45 AM
DIRECTED READING
(24.5% vs. 79.2%); and (3) significantly less use of Withdrawing in the effective examples (0.0% vs. 9.4%). When Forcing was seen to be effective, the authors of the examples were “winners” of a win-lose conflict; when Forcing was seen to be ineffective, the authors of the examples were “losers” of a win-lose conflict. Whether the resolution of conflict via Forcing would actually be perceived to be effective by members of the organization outside the conflict (i.e., objectively seen as effective), as it was perceived to be effective by the “winners,” remains to be determined by future research.
Effective Conflict Resolution A few of the examples of effective conflict resolution are provided to highlight specific features of Confrontation. These were taken verbatim from the written descriptions. 1. This example highlights the presentation of a problem of mutual interest—meeting deadlines more often at the earliest opportunity (when the problem is observed). Superior is open-minded and asking for help. “I once was given the responsibility for managing a small group of technicians engaged in turning out critical path schedules. I spent some time trying to get organized and involved with the group, but I sensed a hostile atmosphere, accompanied by offhand sarcastic remarks. At the end of the day very little work had been accomplished. “The next day when I came in, I called the group together and told them that we were falling behind, and asked them to help me find a solution. After the initial distrust had been dissipated, the group produced some good ideas on work reallocation, office arrangement, priorities and techniques. I told the group that all of their agreed-upon suggestions would be implemented at once, and their reply was that the backlog would be cleared in three days and would not build up again. “Within three days the backlog was gone, the group worked together better, and for the six months I was in charge, schedules were always ready before they were required.” 2. This example highlights emphasis on facts in determining the best resolution of conflict. Both had strong convictions but one willingly moved to the other’s position when facts indicated that this position was best. “The project engineer and I disagreed about the method of estimating the cost of alternative schemes in a highway interchange. Neither of us could agree on the other’s method. Eventually I was able to satisfy him using algebra. We were both happy with the result.” 3. Like Example 2, this one highlights an emphasis on facts and the conviction that by digging and digging, the truth will be discovered. Although the superior had a vested interest in the “old” system (a product of his thinking), the discussion was never personalized. That is, it did not involve
81721_Ch04.indd 185
185
“me” versus “you,” but rather a comparison of two systems, two concepts or two ideas. “About a year ago I developed a new system for processing the accounting of the inventory of obsolete material on hand in our plant. It was my estimation that it would prove to be an easier system to operate and control and would also involve a considerable monetary saving for the company. “When I approached my boss with the system, he immediately turned it down as he had developed the present system and was sure it was the best possible system. As I was sure my new system was superior to the present one, I then convinced him to join me in analyzing a comparison of the two systems, pointing out the strengths and weaknesses of the two. After a period of evaluation involving many differences of opinion, we were able to resolve that my system had definite merit and should be brought into operation.” 4. This example highlights the fact that through problem solving both parties can benefit. Instead of compromising, the issues are discussed until a solution completely satisfactory to both is found. Often this is superior to the ones initially favored by the separate parties. “In the—Board of Education, there were eight inspectors of Public Schools and four superintendents. Last February the inspectors were given the assignment of developing an in-service plan for the training of teachers for the school year 1968–69. The inspectors gave the assignment to a group of three of their number who were to bring a report to the next inspectors’ meeting. I was not a member of the in-service committee but in conversations with the committee members I discovered that they contemplated having an in-service program for two teachers from each school (there are about 85 schools) once a month for the entire year in mathematics. I felt that this would be a very thin coverage of our 2000 or so teachers. “Consequently I worked on a plan whereby utilizing two Thursday mornings a month and the specialized teaching help available in—, every teacher would have the opportunity to become involved in an in-service training session in a subject of his or her choice once during the year. At the inspectors’ meeting the subcommittee presented its report and after some procedural wrangling I was permitted to present my plan. The two were diametrically opposed and it looked as if my plan would be voted down except the chairman suggested that both plans be presented to the superintendents. “At the meeting of the superintendents, the subcommittee made its report and I presented my plan. As the meeting progressed there was some give and take and instead of one or the other being discarded, both plans were adopted. For this school year mathematics is stressed for the first eight Thursday mornings (their plan in a rather concentrated form); then for the next eight months on the second and fourth Thursday my plan is used. We came out of this meeting with a combination of the two plans which was better than either one individually.”
9/16/08 12:46:46 AM
186
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
Ineffective Conflict Resolution Examples 5, 6, and 7 illustrate Forcing methods of conflict resolution. A win-lose situation is set up, and usually the superior wins. The individual with the greater power triumphs (a personalized disagreement) rather than the one whose position is supported by the most factual evidence. 5. “In a previous job, I worked for a major management consulting group as a consultant. One assignment, lasting four months, was to use a simulation technique to evaluate the most preferable investment decision using defined quantitative criteria. At the end of the job two alternatives were shown to be marginally better than the other. However, later sensitivity tests also showed that the analytical technique could not rate one to be substantially better than the other. “Therefore, I wrote a ‘technically honest’ report stating that our analysis could not provide the one best alternative. My manager, feeling that we were hired to recommend a ‘one best’ alternative, wanted to cover up the limitations of our methodology. “We disagreed and I was overruled. The manager wrote a ‘technically dishonest’ version of the report and the revised report was sent to the client indicating the ‘one best’ alternative.” 6. “Recently in my firm, management had sprung a secrecy agreement contract upon all of the technical people. No word of introduction or explanation was given. It was simply handed out and we were asked to sign it. Most of us found objection in several clauses in the agreement. However, management officials stated that the agreement would probably not stand up in a court of law. They further stated that it was something that was sent from corporate in the United States and was not their idea. The employees continued to show reluctance. “The vice-president called on everyone individually and stated that there would be no room for advancement for anyone who did not sign the contract. As a result, everyone signed.” 7. “I was assigned a project by my boss to determine the optimum way, using predetermined times, to lay out an assembly line. It would have to provide optimum efficiency with the following variables: (a) different hourly production rates (e.g., 100/hr. Mon., 200/hr. Tues.) which would mean different numbers of operators on the line; (b) different models of the product (electric motors). The group was on group incentive. “After much research and discussion, the system was installed utilizing the floating system of assembly (operators could move from station to station in order to keep out of the bottleneck operation). This system was working out well. However, at this time I was informed by my boss that he and the foreman of the area decided that they wished to use the ‘paced’ system of assembly. This would mean the conveyor belt would be run at set speeds and that the stripes would be printed on the belt indicating that one device would have to be placed on each mark and operators would not float.
81721_Ch04.indd 186
“I was dead against this since I had considered it and rejected it in favor of the implemented method. I was, however, given the order to use their proposed system or else. There was no opportunity for discussion or justification of the method.” 8. This example is a classic description of Withdrawal as a mode of conflict resolution. Clearly the problem is not resolved. “On the successful completion of a project which involved considerable time and effort, I was praised and thanked for a job well done by my immediate supervisor and his supervisor, the vice-president in charge of manufacturing. They promised me that on my next salary review I would receive a substantial increase. “The next salary review came up and my immediate supervisor submitted an amount that he and I felt was a good increase. The amount I received was one-third of this figure. I felt insulted, cheated, and hurt that the company considered I was worth this ‘token’ amount. “I had a personal interview with the vice-president where I argued that I felt I should receive more. He agreed in sort of an offhanded way—he felt the whole salary schedule should be reviewed and that my area of responsibility should be increased. He said the company wants people to ‘prove themselves’ before they give them increases; and he suggested a salary review. I felt I had just done this in my last project—I felt I was being put off, but agreed to the salary review. “One month passed and nothing happened. I became frustrated—I purposely slowed down the amount of work I turned out. “Another month passed and still no action. I became disillusioned with the company and resolved at this point to look for another position. Several months later with still no action, I resigned and accepted another position.”
Inability to Resolve Conflict These descriptions of ineffective resolution of conflict indicate that an impressive number of respondents included termination or change of employment of one member in the situation (19 of 53, 26%). These cases tended to be of two types. The first is represented by Example 8. Here an employee decides to quit because he felt the problem was not resolved in a satisfactory manner. Forcing is likely to be associated with instances of voluntary termination. The second centered around an inability to resolve the conflict. Then the “problem employee” (a visible symptom of the conflict) was dismissed. 9. The following example illustrates this: “This concerned a young girl about 18 years old who was a typist in our office. This girl lacked a little maturity, but was not really all that bad. She was tuned to all the latest fashions in both dress and manners. “I felt and still feel that this girl was a potentially good employee. But it was decided that she should be let go. The argument used was that she was not a good worker
9/16/08 12:46:46 AM
DIRECTED READING
and lacked the proper attitude for office work. Rather than spend a little time and effort to understand the girl and perhaps develop her into a good employee, the easy way was taken and the girl was fired.” There were two other clear cases of “effective” conflict resolution resulting in voluntary employee terminations. In both instances a Forcing mode was employed and the “loser” resigned from the organization soon after. Our finding is that these were given as examples of effective conflict resolution by the “winner.” In another effective example of Forcing, the “loser” was dismissed.
Conclusions The results of this investigation are consistent with an earlier study (Burke, 1969a), and the data of Lawrence and Lorsch (1967a, 1967b) in showing the value of Confrontation-Problem Solving as a method of conflict resolution. About 60 percent of the examples of effective conflict resolution involved use of the method, while no examples of ineffective conflict resolution did. The poorest method of conflict resolution was Forcing. This method accounted for 80 percent of the examples of ineffective conflict resolution and only 24 percent of the examples of effective conflict resolution. The latter conclusion is somewhat at odds with Lawrence and Lorsch’s findings that Forcing was an effective backup method to Confrontation, from an organizational effectiveness standpoint. In fact, the earlier study (Burke, 1969a) found that the use of these methods tended to be negatively correlated. Managers high in use of one of them tended to be low in use of the other.
Characteristics of Problem Solving Let us now consider more specific features of Confrontation, the most effective method of resolving interpersonal conflict. Insights from the present investigation and the writings of others (e.g., Blake, Shepard, and Mouton, 1964; Maier, 1963; Maier and Hoffman, 1965) becomes relevant. The following then are characteristics of Confrontation as a method of managing conflict: 1. Both people have a vested interest in the outcome (Examples 1, 2, 3, and 4). 2. There is a belief on the part of the people involved that they have the potential to resolve the conflict and to achieve a better solution through collaboration. 3. There is a recognition that the conflict or the problem is mainly in the relationship between the individuals and not in each person separately. If the conflict is in the relationship, it must be defined by those who have the relationship. In addition, if solutions are to be developed, the solutions have to be generated by those who share the responsibility for assuring that the solution will work and for making the relationship last.
81721_Ch04.indd 187
187
4. The goal is to solve the problem, not to accommodate different points of view. This process identifies the causes of reservation, doubt, and misunderstanding between the people confronted with conflict and disagreement. Alternative ways of approaching conflict resolution are explored and tested (Examples 2 and 3). 5. The people involved are problem-minded instead of solution-minded; “fluid” instead of “fixed” positions. Both parties jointly search out the issues that separate them. Through joint effort, the problems that demand solutions are identified, and later solved. 6. There is a realization that both aspects of a controversy have potential strengths and potential weaknesses. Rarely is one position completely right and the other completely wrong (Example 4). 7. There is an effort to understand the conflict or problem from the other person’s point of view, and from the standpoint of the “real” or legitimate needs that must be recognized and met before problem solving can occur. Full acceptance of the other is essential. 8. The importance of looking at the conflict objectively rather than in a personalized sort of way is recognized (Example 3). 9. An examination of one’s own attitudes (hostilities, antagonisms) is needed before interpersonal contact on a less effective basis has a chance to occur. 10. An understanding of the less effective methods of conflict resolution (e.g., win-lose, bargaining) is essential. 11. One needs to present “face-saving” situations. Allow people to “give” so that a change in one’s viewpoint does not suggest weakness or capitulation. 12. There is need to minimize effects of status differences, defensiveness, and other barriers which prevent people from working together effectively. 13. It is important to be aware of the limitations of arguing or presenting evidence in favor of your own position while downgrading the opponent’s position. This behavior often stimulates the opponent to find even greater support for his position (increased polarization). In addition, it leads to selective listening for weaknesses in the opponent’s position rather than listening to understand his or her position.
Attitude, Skill, and Creativity Two related themes run through these characteristics, one dealing with attitudes, and the other with skills (interpersonal, problem solving) of the individuals involved. As the research of Maier and his associates has shown, differences and disagreements need not lead to dissatisfaction and unpleasant experiences but rather can lead to innovation and creativity. One of the critical variables was found to be the leader’s attitudes toward disagreement. The person with
9/16/08 12:46:46 AM
188
CHAPTER 4 / NEGOTIATION AND THE MANAGEMENT OF CONFLICT
different ideas, especially if he or she is a subordinate, can be seen as a problem employee and troublemaker or as an innovator, depending on the leader’s attitude. There are some people that go through life attempting to sell their ideas, to get others to do things they do not want to do. They set up a series of win-lose situations, and attempt to emerge victorious. Many of these people are able to accomplish their ends. There are others who are more concerned with the quality and effectiveness of their operations, and who, with creative solutions to problems, are genuinely openminded and able and willing to learn from others (and to teach others), in a collaborative relationship. The interpersonal skills are related to the development of a “helping relationship” and include among other things, mutual trust and respect, candid communication, and awareness of the needs of others. The problem solving skills center around locating and stating the problem, seeking alternatives, exploring and testing alternatives, and selecting the best alternative. Knowledge and insight gained through experience with the benefits of problem solving and the dysfunctional effects of other strategies would be valuable in developing interpersonal skills.
Further Research Needed Two additional areas need immediate research consideration. The first needs to explore the notions of conflict resolution from the organizational as well as the individual viewpoint. Lawrence and Lorsch report that Forcing was an effective back-up mode to Confrontation from the organization’s standpoint, because at least things were being done. Our data in two separate investigations indicate that this mode of conflict resolution is very unsatisfactory from the standpoint of the one forced, the “loser,” and may also have dysfunctional consequences. The second research area concerns the application of these principles of effective conflict resolution (ConfrontationProblem Solving, with their more specific attitudinal and skill components) in an attempt to arrive at more constructive use of disagreement. Preliminary results from an experiment simulating conflict situations using role playing suggest that knowledge of these principles and some limited practice in their use increases one’s ability to use differences constructively in obtaining a quality solution, and decreases the tendency to engage in “limited war” (Burke, 1969b). References Blake, R. R., and J. S. Mouton. The Managerial Grid, Houston: Gulf Publishing Company, 1964. Blake, R. R., H. A. Shepard, and J. S. Mouton. Managing Intergroup Conflict in Industry, Houston: Gulf Publishing Company, 1964.
81721_Ch04.indd 188
Boulding, K. “A pure theory of conflict applied to organization.” In R. I. Kahn and E. Boulding (eds.), Power and Conflict in Organizations. New York: Basic Books, Inc., 1964, pp. 136–145. Burke, R. J. “Methods of managing superior-subordinate conflict: Their effectiveness and consequences.” Unpublished manuscript, 1969a. Burke, R. J. “Effects of limited training on conflict resolution effectiveness.” Unpublished manuscript, 1969b. Kata, D. “Approaches to managing conflict.” In R. L. Kahn and E. Boulding (eds.), Power and Conflict in Organizations. New York: Basic Books, Inc., 1964, pp. 105–114. Lawrence, P. R., and J. W. Lorsch. “Differentiation and integration in complex organizations.” Administrative Science Quarterly, 1967a, 12, 1–47. Lawrence, P. R., and J. W. Lorsch. Organization and Environment, Boston: Division of Research, Harvard Business School, Harvard University, 1967b. Maier, N. R. F. Problem-Solving Discussions and Conferences. New York: McGraw-Hill, 1963. Maier, N. R. F., and L. R. Hoffman. “Acceptance and quality of solutions as related to leaders’ attitudes toward disagreement in group problem-solving.” Journal of Applied Behavioral Science, 1965, 1, pp. 373–386. McGregor, D. The Professional Manager. New York: McGraw-Hill, 1967. Shepard, H. A. “Responses to situations of competition and conflict.” In R. L. Kahn and E. Boulding (eds.), Power and Conflict in Organizations. New York: Basic Books, Inc., 1964, pp. 127–135. Questions 1. In Table 1, what was the second best resolution technique? What was the worst resolution technique? What do you conclude from this? 2. Which of the four examples of conflict resolution is the best example, in your opinion, of effective resolution? Why? 3. Of the ineffective resolution examples, which was the worst, in your opinion? Why? 4. Summarize or condense the 13 characteristics of Confrontation as a conflict-resolving method. 5. The article concludes on the note that conflict need not be a bad thing. Compare this view with that in the chapter concerning the win-win approach to negotiation.
9/16/08 12:46:47 AM
C
H
A
P
T
E
R
5 The Project in the Organizational Structure
A firm, if successful, tends to grow, adding resources and people, developing an organizational structure. Commonly, the focus of the structure is specialization of the human elements of the group. As long as its organizational structure is sufficient to the tasks imposed on it, the structure tends to persist. When the structure begins to inhibit the work of the firm, pressures arise to reorganize along some other line. The underlying principle will still be specialization, but the specific nature of the specialization will be changed. Any elementary management textbook covers the common bases of specialization. In addition to the ever-popular functional division, firms organize by product line, by geographic location, by production process, by type of customer, by subsidiary organization, by time, and by the elements of vertical or horizontal integration. Indeed, large firms frequently organize by several of these methods at different levels. For example, a firm may organize by major subsidiaries at the top level; the subsidiaries organize by product groups; and the product groups organize into customer divisions. These, in turn, may be split into functional departments that are further broken down into production process sections, which are set up as three-shift operating units. In the past decade or so, a new kind of organization structure has appeared in growing numbers—the project organization, a.k.a. “enterprise project management” (Dinsmore, 1998; Levine, 1998; Williams, 1997), also known as “managing organizations by projects,” the “project-oriented firm,” and other names. Such organizations have been described as applying “project management practices and tools across an enterprise” (Levine, 1998). The source of these organizations is probably in the software industry that has long made a practice of developing major software application programs by decomposing them into a series of comparatively small software projects. Once the projects are completed, they are integrated into the whole application system. A great many firms, both software and nonsoftware firms alike, have now adopted a system whereby their traditional business is carried out in the traditional way, but anything that represents a change is carried out as a project. One hospital, for example, operates the usual departments in what, for them, are the usual ways. At the same time, the hospital supports several dozen projects oriented toward developing new health care products, or changing various aspects of standard medical and administrative methods.
189
81721_Ch05.indd 189
9/16/08 12:51:53 AM
190
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
There are many reasons for the rapid growth of project-oriented organizations, but most of them can be subsumed in four general areas. First, speed and market responsiveness have become absolute requirements for successful competition. It is no longer competitively acceptable to develop a new product or service using traditional methods in which the potential new product is passed from functional area to functional area until it is deemed suitable for production and distribution. (See Section 5.3 for a description of how Chrysler shortened the design-production cycle for new automobile models.) First-to-market is a powerful competitive advantage. Further, in many industries it is common (and necessary) to tailor products specifically for individual clients. Suppliers of hair care products or cosmetics, for example, may supply individual stores in a drug chain with different mixes of products depending on the purchase patterns, ethnic mix of customers, and local style preferences for each store. Second, the development of new products, processes, or services regularly requires inputs from diverse areas of specialized knowledge. Unfortunately, the exact mix of specialties appropriate for the design and development of one product or service is rarely suitable for another product or service. Teams of specialists that are created to accomplish their ad hoc purpose and disband typify the entire process. Third, the rapid expansion of technological possibilities in almost every area of enterprise tends to destabilize the structure of organizations. Consider communications, entertainment, banks, consumer product manufacturing and sales, the automotive industry, aircraft manufacture, heavy electrical equipment, machine tools, and so forth without end. Mergers, downsizing, reorganizations, spin-offs, new marketing channels, and other similar major disturbances all require system-wide responsiveness from the total organization. Again, no traditional mechanism exists to handle change on such a large scale satisfactorily—but project organization can. Finally, TV, movies, novels, and other mythology to the contrary, a large majority of senior managers we know rarely feel much confidence in their understanding of and control over a great many of the activities going on in their organizations. The hospital mentioned above became a project-oriented organization because its new CEO strongly felt that she had no way of understanding, measuring, or controlling anything going on in the hospital except for the most routine, traditional activities. Transforming nonroutine activities into projects allowed her to ensure that accountability was established, projects were properly planned, integrated with other related activities, and reported routinely on their progress. Moving from a nonproject environment to one in which projects are organized and used to accomplish special tasks to a full-fledged project-oriented organization presents senior management of a firm with an extraordinarily difficult transition. A full treatment of this subject is beyond the scope of this book, but several observations are in order. First, the process is time consuming. Even when the required resources are available and senior management is fully committed to the transition, it is still an arduous process. Our experience indicates that when all goes well, the transition rarely requires less than three years. In an excellent article on the process of leading fundamental change in a complex organization, Kotter (1997) lists eight steps that must be successfully completed if the change is to be accomplished. Most of these are dependent on active leadership from top management. Whether the organization is conducting a few occasional projects or is fully project oriented and carrying on scores of projects, any time a project is initiated, three organizational issues immediately arise. First, a decision must be made about how to tie the project to the parent firm. Second, a decision must be made about how to organize the project itself. Third, a decision must be made about how to organize activities that are common to other projects. In Chapter 3 we discussed the selection of the project manager (PM) and described the difficulties and responsibilities inherent in the PM’s role. This chapter focuses on the interface between the project and its parent organization (i.e., how the project is organized as a part of its host). In the latter part of this chapter, we begin a discussion of how the project itself is organized, a discussion that will be continued in the next chapter.
81721_Ch05.indd 190
9/16/08 12:51:53 AM
5.1
THE PROJECT AS PART OF THE FUNCTIONAL ORGANIZATION
191
First we look at the three major organizational forms commonly used to house projects and see just how each of them fits into the parent organization. We examine the advantages and disadvantages of each form, and discuss some of the critical factors that might lead us to choose one form over the others. We then consider some combinations of the fundamental forms and briefly examine the implications of using combination structures. Finally, we discuss some of the details of organizing the project team, describing the various roles of the project staff. We then turn to the formation and operation of two groups that may provide critically important services for all projects, the risk management group, and the project management office. The skill with which these two groups organize, administer, and carry out their jobs will have a major impact on the ability of projects to meet their objectives. We also describe some of the behavioral problems that face any project team. Finally, we discuss the impact that various ways of structuring projects may have on intraproject conflict in projectoriented firms. To our knowledge, it is rare for a PM to have much influence over the interface between the organization and the project, choice of interface usually being made by senior management. The PM’s work, however, is strongly affected by the project’s structure, and the PM should understand its workings. Experienced PMs do seem to mold the project’s organization to fit their notions of what is best. One project team member of our acquaintance remarked at length about how different life was on two projects (both matrix organized) run by different PMs. Study of the subtle impacts of the PM on project structure deserves more attention from researchers in the behavioral sciences.
5.1
THE PROJECT AS PART OF THE FUNCTIONAL ORGANIZATION As one alternative for giving the project a “home,” we can make it a part of one of the functional divisions of the firm. Figure 5-1 is the organizational chart for the University of Cincinnati, a functionally organized institution. If U.C. undertook the development of a Master of Science program in Project Management (or perhaps an MPM), the project would probably be placed under the general supervision of the senior vice president and provost, under the specific supervision of the dean of the College of Business (and/or College of Engineering), and would be managed by a senior faculty member with a specialty in operations management. (It might also be placed under the general supervision of the V.P. and dean for Graduate Studies and Research.) A project involving the construction of a new parking garage would fall under the V.P. for Business Affairs, as would a project to construct a local area network for all computers on the university campus. For functionally organized projects, the project is assigned to the functional unit that has the most interest in ensuring its success or can be most helpful in implementing it. As we noted in the case of the proposed MPM, more than one choice of parent may exist. There are advantages and disadvantages of using functional elements of the parent organization as the administrative home for a project, assuming that one has chosen an appropriate function. The major advantages are: 1. There is maximum flexibility in the use of staff. If the proper functional division has been chosen as the project’s home, the division will be the primary administrative base for individuals with technical expertise in the fields relevant to the project. Experts can be temporarily assigned to the project, make the required contributions, and immediately be reassigned to their normal work. 2. Individual experts can be utilized by many different projects. With the broad base of technical personnel available in the functional divisions, people can be switched back and forth between the different projects with relative ease.
81721_Ch05.indd 191
9/16/08 12:51:54 AM
81721_Ch05.indd 192
9/16/08 12:51:54 AM
Administrative Policy Procedures Coordination Personnel Benefits Compensation Employment Labor and Employee Relations Records Training and Development
University of Cincinnati organization chart.
Figure 5-1
Graduate Education Research Administration Research Institutes
Government and Behavioral Science Legislative Liaison Laboratory (Local, State, and National) Institute of Governmental Information Services Research Public Relations Institutional Research
Accounting and Budgetary Control Budget Planning Cashiering and Student Accounts
UC Founder
Colleges of: Medicine Nursing and Health Pharmacy
Financial Reporting and Control Investments Management Payroll Administration Payroll and Employee Records Processing
Campus Planning and Construction Campus Security and Safety Campus Services Campus Mail Parking Services Printing Services Publications Subsidized Employee Work Programs Telephone Communications Transportation Services University Bookstores
Physical Plant Energy Systems Operations and Maintenance Purchasing and Material Management Contract Compliance Property Control U.C. Computer Center Academic and Admin. Computer Services Contract Services
Vice President for Business Affairs
Medical Center Administrative Units (including Medical Center Personnel) Medical Center Libraries University Hospital (General and Holmes Divisions)
Senior Vice President Director of Medical Center
Vice President for Finance and Treasurer
Appointing Officer Contracting Office Custodian of Records Internal Audit/ Management Services Legal Advisory Services Secretary of the Board
Senior Vice President for Administration
Vice President and Dean for Graduate Studies and Research
OMI College of Applied Science Raymond Walters University College Academic Affairs Continuing Education and Metropolitan Services Enrollment Policy and Educational Research Faculty Affairs Professional Practice Student Affairs University Libraries
Enrollment Advertising Publicity and Promotion
Vice President for Public Affairs
Colleges of: Arts and Sciences Business Clermont College College Conservatory of Music Community Services Design, Architecture, and Art Education and Home Economics Engineering Evening College Law
Senior Vice President and Provost
Athletics
Ombudsman
Development Liaison WGUC Radio
President
Alumni Affairs
Affirmative Action
Board of Trustees
5.1
THE PROJECT AS PART OF THE FUNCTIONAL ORGANIZATION
193
3. Specialists in the division can be grouped to share knowledge and experience. Therefore, the project team has access to whatever technical knowledge resides in the functional group. This depth of knowledge is a potential source of creative, synergistic solutions to technical problems. 4. The functional division also serves as a base of technological continuity when individuals choose to leave the project, and even the parent firm. Perhaps just as important as technological continuity is the procedural, administrative, and overall policy continuity that results when the project is maintained in a specific functional division of the parent firm. 5. Finally, and not the least important, the functional division contains the normal path of advancement for individuals whose expertise is in the functional area. The project may be a source of glory for those who participate in its successful completion, but the functional field is their professional home and the focus of their professional growth and advancement. Just as there are advantages to housing the project in a functional area, there are also disadvantages: 1. A primary disadvantage of this arrangement is that the client is not the focus of activity and concern. The functional unit has its own work to do, which usually takes precedence over the work of the project, and hence over the interests of the client. 2. The functional division tends to be oriented toward the activities particular to its function. It is not usually problem oriented in the sense that a project should be to be successful. 3. Occasionally in functionally organized projects, no individual is given full responsibility for the project. This failure to pinpoint responsibility usually means that the PM is made accountable for some parts of the project, but another person is made accountable for one or more other parts. Little imagination is required to forecast the lack of coordination and chaos that results. 4. The same reasons that lead to lack of coordinated effort tend to make response to client needs slow and arduous. There are often several layers of management between the project and the client. 5. There is a tendency to suboptimize the project. Project issues that are directly within the interest area of the functional home may be dealt with carefully, but those outside normal interest areas may be given short shrift, if not totally ignored. 6. The motivation of people assigned to the project tends to be weak. The project is not in the mainstream of activity and interest, and some project team members may view service on the project as a professional detour. 7. Such an organizational arrangement does not facilitate a holistic approach to the project. Complex technical projects such as the development of a jet transport aircraft or an emergency room in a hospital simply cannot be well designed unless they are designed as a totality. No matter how good the intentions, no functional division can avoid focusing on its unique areas of interest. Cross-divisional communication and sharing of knowledge is slow and difficult at best.
Project Management in Practice Reorganizing for Project Management at Prevost Car
In July 1994, the vice-president of production at Prevost Car in Quebec City, Canada, was told that he would have to expand production capacity 31 percent
81721_Ch05.indd 193
in the next five months. In the past, such a task would start with a bulldozer the next day and the work would be under way, but no one knew at what cost, what
9/16/08 12:51:54 AM
194
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
timetable, or what value to the firm. Realizing that he needed some fresh ideas, a structured approach, and that there was no allowance for a mistake, the VP contacted a project management consulting firm to help him. The consulting firm set up a five-day meeting between their project managers, a value engineering expert, and the seven foremen from Prevost’s main factory to scope out the project. The group produced a report for senior management outlining a $10 million project to expand the main factory by 60,000 square feet, and a follow-on potential to make a further expansion of 20 percent more. The detail of the plan came as a revelation to top management who approved it after only two days of study. After it was completed on time and on budget, the firm also committed to the additional 20 percent expansion which also came in as planned. The success of this project resulted in “infecting” Prevost Car with the project management “bug.”
5.2
The next major task, an initiative to reduce workplace injuries, was thus organized as a project and was also highly successful. Soon, all types of activities were being handled as projects at Prevost. The use of project management in manufacturing firms is highly appropriate given their need to adapt quickly to ferocious international competition, accelerating technological change, and rapidly changing market conditions. In addition, Prevost has found that project management encourages productive cooperation between departments, fresh thinking and innovation, team approaches to problems, and the highly valued use of outside experts to bring in new ideas, thereby breaking current short-sighted habits and thinking. As Prevost’s VP states: “Right now it’s a question of finding what couldn’t be better managed by project.” Source: M. Gagne, “Prevost Car—The Power of Project Management,” PM Network, August 1997, pp. 35–36.
PURE PROJECT ORGANIZATION At the other end of the organizational spectrum is pure project organization. The project is separated from the rest of the parent system. It becomes a self-contained unit with its own technical staff, its own administration, tied to the parent firm by the tenuous strands of periodic progress reports and oversight. Some parent organizations prescribe administrative, financial, personnel, and control procedures in detail. Others allow the project almost total freedom within the limits of final accountability. There are examples of almost every possible intermediate position. Figure 5-2 illustrates this pure project organization. President
Program manager
V.P. marketing
V.P. manufacturing
V.P. R&D
Marketing Manufacturing Manager, Project A
R&D Finance Personnel Marketing Manufacturing
Manager, Project B
R&D Finance Personnel
Figure 5-2
81721_Ch05.indd 194
Pure project organization.
9/16/08 12:51:54 AM
5.2
PURE PROJECT ORGANIZATION
195
As with the functional organization, the pure project has its unique advantages and disadvantages. The former are: 1. The project manager has full line authority over the project. Though the PM must report to a senior executive in the parent organization, there is a complete work force devoted to the project. The PM is like the CEO of a firm that is dedicated to carrying out the project. 2. All members of the project work force are directly responsible to the PM. There are no functional division heads whose permission must be sought or whose advice must be heeded before making technological decisions. The PM is truly the project director. 3. When the project is removed from the functional division, the lines of communication are shortened. The entire functional structure is bypassed, and the PM communicates directly with senior corporate management. The shortened communication lines result in faster communications with fewer failures. 4. When there are several successive projects of a similar kind, the pure project organization can maintain a more or less permanent cadre of experts who develop considerable skill in specific technologies. Indeed, the existence of such skill pools can attract customers to the parent firm. Lockheed’s famous “Skunk Works” was such a team of experts who took great pride in their ability to solve difficult engineering problems. The group’s name, taken from the Li’l Abner comic strip, reflects the group’s pride, irreverent attitude, and strong sense of identity. 5. The project team that has a strong and separate identity of its own tends to develop a high level of commitment from its members. Motivation is high and acts to foster the task orientation discussed in Chapter 3. 6. Because authority is centralized, the ability to make swift decisions is greatly enhanced. The entire project organization can react more rapidly to the requirements of the client and the needs of senior management. 7. Unity of command exists. While it is easy to overestimate the value of this particular organizational principle, there is little doubt that the quality of life for subordinates is enhanced when each subordinate has one, and only one, boss. 8. Pure project organizations are structurally simple and flexible, which makes them relatively easy to understand and to implement. 9. The organizational structure tends to support a holistic approach to the project. A brief explanation of the systems approach was given in Chapter 3, and an example of the problems arising when the systems approach is not used appears in Section 5.3 of this chapter. The dangers of focusing on and optimizing the project’s subsystems rather than the total project are often a major cause of technical failure in projects. While the advantages of the pure project organization make a powerful argument favoring this structure, its disadvantages are also serious: 1. When the parent organization takes on several projects, it is common for each one to be fully staffed. This can lead to considerable duplication of effort in every area from clerical staff to the most sophisticated (and expensive) technological support units. If a project does not require a full-time personnel manager, for example, it must have one nonetheless because personnel managers come in integers, not fractions, and staff is usually not shared across projects. 2. In fact, the need to ensure access to technological knowledge and skills results in an attempt by the PM to stockpile equipment and technical assistance in order to be certain that it will be available when needed. Thus, people with critical technical skills may be hired by the
81721_Ch05.indd 195
9/16/08 12:51:55 AM
196
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
3.
4.
5.
6.
5.3
project when they are available rather than when they are needed. Simila rly, they tend to be maintained on the project longer than needed, “just in case.” Disadvantages 1 and 2 combine to make this way of organizing projects very expensive. Removing the project from technical control by a functional department has its advantages, but it also has a serious disadvantage if the project is characterized as “high technology.” Though individuals engaged with projects develop considerable depth in the technology of the project, they tend to fall behind in other areas of their technical expertise. The functional division is a repository of technical lore, but it is not readily accessible to members of the pure project team. Pure project groups seem to foster inconsistency in the way in which policies and procedures are carried out. In the relatively sheltered environment of the project, administrative cornercutting is common and easily justified as a response to the client or to technical exigency. “They don’t understand our problems” becomes an easy excuse for ignoring dicta from headquarters. In pure project organizations, the project takes on a life of its own. Team members form strong attachments to the project and to each other. A disease known as projectitis develops. A strong we–they divisiveness grows, distorting the relationships between project team members and their counterparts in the parent organization. Friendly rivalry may become bitter competition, and political infighting between projects is common. Another symptom of projectitis is the worry about “life after the project ends.” Typically, there is considerable uncertainty about what will happen when the project is completed. Will team members be laid off? Will they be assigned to low-prestige work? Will their technical skills be too rusty to be successfully integrated into other projects? Will our team (that old gang of mine) be broken up?
THE MATRIX ORGANIZATION In an attempt to couple some of the advantages of the pure project organization with some of the desirable features of the functional organization, and to avoid some of the disadvantages of each, the matrix organization was developed. In effect, the functional and the pure project organizations represent extremes. The matrix organization is a combination of the two. It is a pure project organization overlaid on the functional divisions of the parent firm. Being a combination of pure project and functional organization structures, a matrix organization can take on a wide variety of specific forms, depending on which of the two extremes (functional or pure project) it most resembles. The “project” or “strong” matrix most resembles the pure project organization. The “functional” or “weak” matrix most resembles the functional form of organization. Finally, the “balanced” matrix lies in between the other two. In practice, there is an almost infinite variety of organizational forms between the extremes, and the primary difference between these forms has to do with the relative power/decision authority of the project manager and the functional manager. Because it is simpler to explain, let us first consider a strong matrix, one that is similar to a pure project. Rather than being a stand-alone organization, like the pure project, the matrix project is not separated from the parent organization. Consider Figure 5-3. The project manager of Project 1, PM1, reports to a program manager who also exercises supervision over other projects. Project 1 has assigned to it three people from the manufacturing division, one and one-half people from marketing, one-half of a person each from finance and personnel, four individuals from R & D, and perhaps others not shown. These individuals come from
81721_Ch05.indd 196
9/16/08 12:51:55 AM
5.3
THE MATRIX ORGANIZATION
197
their respective functional divisions and are assigned to the project full-time or part-time, depending on the project’s needs. It should be emphasized that the PM controls when and what these people will do, while the functional managers control who will be assigned to the project and what technology will be used. With heavy representation from manufacturing and R&D, Project 1 might involve the design and installation of a new type of manufacturing process. Project 2 could involve a new product or, possibly, a marketing research problem. Project 3 might concern the installation of a new, computerized, financial control system. All the while, the functional divisions continue on with their routine activities. There is no single executive to whom PMs generally report. If a project is merely one of several in a specific program, the PM typically reports to a program manager, if there is one. It is not uncommon, however, for the PM to report to the manager of the functional area that has a particular interest in the program, or an interest in the project if it is not part of a program. If several projects on mathematics are being conducted for the Office of Naval Research (ONR), for instance, it would be normal for the PMs to report to the ONR section head for Mathematical Sciences. In smaller firms with only a few projects, it is common for the PM to report directly to a senior executive. At the other end of the spectrum of matrix organizations is the functional or weak matrix. A project might, for example, have only one full-time person, the PM. Rather than having an individual functional worker actually assigned to the project, the functional departments devote capacity to the project, and the primary task of the PM is to coordinate the project activities carried out by the functional departments. For example, the PM of a project set up to create a new database for personnel might request that the basic design be done by the systems analysis group in the administrative division. The personnel job would then be added to the normal workload of the systems group. The priority given to the design might be assigned by senior management or might be the result of negotiations between the PM and the head of the systems group. In some cases, the systems group’s charges for the job might also be subject to negotiation. The task could even be subcontracted to an outside vendor. Between these extremes is the balanced matrix, which is typically anything but balanced. There are many different mixtures of project and functional responsibilities. When a functional group’s work is frequently required by projects, it is common to operate the group as a functional unit rather than to transfer its people to the project. For instance, a toxicology unit in a cosmetic business, a quality assurance group in a multiproduct manufacturing firm, or a computer graphics group in a publishing firm might all be functionally organized and President
Program manager
Manufacturing
Marketing
Finance
R&D
Personnel
PM1
3
1 1/2
1/2
4
1/2
PM2
1
4
1/4
1 1/2
1/4
PM3
1/2
3
1/2
1
Figure 5-3
81721_Ch05.indd 197
Matrix organization.
9/16/08 12:51:55 AM
198
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
take on project work much like outside contractors. While the PM’s control over the work is diminished by this arrangement, the project does have immediate access to any expertise in the group, and the group can maintain its technological integrity. The impetus for the matrix organization was the fact that firms operating in hightechnology areas had to integrate several functional specialties to work on a set of projects and wished to time-share expertise between individual projects in the set. Further, the technical needs of the projects often required a systems approach. In earlier times, when a high-technology project was undertaken by a firm, it would start its journey through the firm in the R & D department. Concepts and ideas would be worked out and the result passed on to the engineering department, which would sometimes rework the whole thing. This result would then be forwarded to manufacturing, where it might be reworked once more in order to ensure that the output was manufacturable by the firm’s current machinery. All of this required a great deal of time, and the emergent project might have scant resemblance to the original specifications. In the meantime, another firm would be doing much the same thing on another project for the customer. These two projects might later have to be joined together, or to a third, and the combination was then expected to meet its intended function. For example, the first project might be a jet aircraft engine, the second a weapon system, and the third an airframe. The composite result rarely performed as originally conceived because the parts were not designed as a unified system. The systems approach was adopted as an alternative to the traditional method described above. This did not mean that the same firm had to manufacture everything, but it did mean that one organization had to take responsibility for the integrity of project design—to make sure that the parts were compatible and that the combination would function as expected. (Note that “integrity” and “integration” come from the same word root.) This required that R & D, engineering, manufacturing, etc. work closely together, and that all these work closely with the client, all the while coordinating efforts with other firms that were supplying subsystems for the project. Housing the project in a functional organization was simply too constraining. Setting it up as a pure project was workable but expensive because of the need to duplicate expensive technical talent when more than one project was involved. The matrix organization, which allows the PM to draw temporarily on the technological expertise and assistance of all relevant functions, was a way out of the dilemma. The effectiveness of the systems approach is well demonstrated by the success of the Chrysler Corporation in designing and bringing to market their LH sedans (as well as by their small car, the PT Cruiser, and their sports car, the Viper). The LH design was the product of a process called “concurrent” or “simultaneous” engineering or design that involves marketing, engineering, manufacturing, design, quality assurance, and other departments working together from the outset. This process not only produced designs that have been widely rated as “outstanding,” it also shortened the design-to-street process by about 18 months. Quite apart from the value of a fine design, the economic value of the time saved is immense. The value derives from two sources: (1) less design labor and overhead and (2) earlier sales and return on the investment. For a more complete description of the use of design teams at Chrysler, see Raynal (1992). We have previously discussed the difference between discipline-oriented individuals and those who are problem-oriented, indicating that the latter are highly desirable as members of project teams. Both de Laat (1994) and Kalu (1993) stand as adequate testimony to the fact that discipline-oriented team members tend to become ardent supporters of their functional areas, sometimes to the detriment of the project as a whole. The resultant power struggles may stress the project manager’s skills in conflict reduction. More will be said in Section 5.8 about the nature of these conflicts.
81721_Ch05.indd 198
9/16/08 12:51:55 AM
5.3
THE MATRIX ORGANIZATION
199
The matrix approach has its own unique advantages and disadvantages. Its strong points are: 1. The project is the point of emphasis. One individual, the PM, takes responsibility for managing the project, for bringing it in on time, within cost, and to specification. The matrix organization shares this virtue with the pure project organization. 2. Because the project organization is overlaid on the functional divisions, temporarily drawing labor and talent from them, the project has reasonable access to the entire reservoir of technology in all functional divisions. When there are several projects, the talents of the functional divisions are available to all projects, thus sharply reducing the duplication required by the pure project structure. 3. There is less anxiety about what happens when the project is completed than is typical of the pure project organization. Even though team members tend to develop a strong attachment for the project, they also feel close to their functional “home.” 4. Response to client needs is as rapid as in the pure project case, and the matrix organization is just as flexible. Similarly, the matrix organization responds flexibly and rapidly to the demands made by those inside the parent organization. A project nested within an operating firm must adapt to the needs of the parent firm or the project will not survive. 5. With matrix management, the project will have—or have access to—representatives from the administrative units of the parent firm. As a result, consistency with the policies, practices, and procedures of the parent firm tends to be preserved. If nothing else, this consistency with parent firm procedures tends to foster project credibility in the administration of the parent organization, a condition that is commonly undervalued. 6. Where there are several projects simultaneously under way, matrix organization allows a better companywide balance of resources to achieve the several different time/cost/performance targets of the individual projects. This holistic approach to the total organization’s needs allows projects to be staffed and scheduled in order to optimize total system performance rather than to achieve the goals of one project at the expense of others. 7. While pure project and functional organizations represent extremes of the organizational spectrum, matrix organizations cover a wide range in between. We have differentiated between strong and weak matrices in terms of whether the functional units supplied individuals or capacity to projects. Obviously, some functional units might furnish people and others only supply capacity. There is, therefore, a great deal of flexibility in precisely how the project is organized—all within the basic matrix structure—so that it can be adapted to a wide variety of projects and is always subject to the needs, abilities, and desires of the parent organization. The advantages accruing to the matrix structure are potent, but the disadvantages are also serious. All of the following disadvantages involve conflict—between the functional and project managers for the most part. 1. In the case of functionally organized projects, there is no doubt that the functional division is the focus of decision-making power. In the pure project case, it is clear that the PM is the power center of the project. With matrix organizations, the power is more balanced. Often, the balance is fairly delicate. When doubt exists about who is in charge, the work of the project suffers. If the project is successful and highly visible, doubt about who is in charge can foster political infighting for the credit and glory. If the project is a failure, political infighting will be even more brutal to avoid blame. 2. While the ability to balance time, cost, and performance between several projects is an advantage of matrix organizations, that ability has its dark side. The set of projects must be carefully monitored as a set, a tough job. Further, the movement of resources from project
81721_Ch05.indd 199
9/16/08 12:51:56 AM
200
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
to project in order to satisfy the several schedules may foster political infighting among the several PMs, all of whom tend to be more interested in ensuring success for their individual projects than in helping the total system optimize organizationwide goals. 3. For strong matrices, problems associated with shutting down a project are almost as severe as those in pure project organizations. The projects, having individual identities, resist death. Even in matrix organizations, projectitis is still a serious disease. 4. In matrix-organized projects, the PM controls administrative decisions and the functional heads control technological decisions. The distinction is simple enough when writing about project management, but for the operating PM the division of authority and responsibility inherent in matrix management is complex. The ability of the PM to negotiate anything from resources to technical assistance to delivery dates is a key contributor to project success. Success is doubtful for a PM without strong negotiating skills. 5. Matrix management violates the management principle of unity of command. Project workers have at least two bosses, their functional heads and the PM. There is no way around the split loyalties and confusion that result. Anyone who has worked under such an arrangement understands the difficulties. Those who have not done so cannot appreciate the discomforts it causes. To paraphrase Plato’s comment on democracy, matrix management “is a charming form of management, full of variety and disorder.”
Virtual Projects Virtual projects are those in which work on the project team crosses time, space, organizational, or cultural boundaries. Thus, a virtual team may work in different time periods, be geographically dispersed, work in different organizations, or work in different cultures. In all cases, the rise of virtual projects has been facilitated by the use of the Internet and other communication technologies. In many of these cases, the project team is often organized in some matrix-type of structure rather than a functional or project form. Kalu (1993, p. 175) further defines virtual positions as “task processes, the performance of which requires composite membership” in both project and functional organizations. When complex organizations conduct projects, virtual positions are typical because projects usually require input from several functional departments. This creates overlapping and shared responsibility for the work with functional and project managers sharing responsibility for execution of the project. Some more narrowly specify that virtual projects exist when project team members are geographically dispersed (Adams et al., 1997). Gratton (2007) offers some rules for success when organizations find they must use geographically dispersed virtual teams for some of their projects.
• • • • • •
81721_Ch05.indd 200
Only use virtual teams for projects that are challenging and interesting. But also be sure the project is meaningful to the company as well as the team. Solicit volunteers as much as possible—they’ll be more enthusiastic and dedicated to the success of the project. Include a few members in the team who already know each other, and make sure one in every six or seven are “boundary spanners” with lots of outside contacts. Create an online resource for team members to learn about each other (especially how they prefer to work), collaborate, brainstorm, and draw inspiration. Encourage frequent communication, but not social gatherings (which will occur at more natural times anyway). Divide the project work into geographically independent modules as much as possible so progress in one location isn’t hampered by delays in other locations.
9/16/08 12:51:56 AM
5.4
5.4
MIXED ORGANIZATIONAL SYSTEMS
201
MIXED ORGANIZATIONAL SYSTEMS As noted in the introduction to this chapter, divisionalization is a means of dividing a large and monolithic organization into smaller, more flexible units. This enables the parent organization to capture some of the advantages of small, specialized organizational units while retaining some of the advantages that come with larger size. Organizing projects by product involves establishing each product project as a relatively autonomous, integrated element within the organization as a whole. Such primary functions as engineering and finance are then dedicated to the interests of the product itself. Software projects are a common type of project organized by “product.” Software projects often occur in clusters—several different projects that are parts of the same overall information system or application software. Pursuing such projects as a group tends to ensure that they will be compatible, one with another, and even increases the likelihood that they will be completed as a group. Consider a firm making lawn furniture. The firm might be divisionalized into products constructed of plastic or aluminum. Each product line would have its own specialized staff. Assume now two newly designed styles of furniture, one plastic and the other aluminum, each of which becomes a project within its respective product division. (Should a new product be a combination of plastic and aluminum, the pure project form of organization will tend to forestall interdivisional battles for turf.) Similarly, organization by territory is especially attractive to national organizations whose activities are physically or geographically spread, and where the products have some geographical uniqueness, such as ladies’ garments. Project organization across customer divisions is typically found when the projects reflect a paramount interest in the needs of different types of customers. Here customer preferences are more substantial than either territorial or product activities. The differences between consumer and manufacturer, or civilian and military, are examples of such substantial differences. A special kind of project organization often found in manufacturing firms develops when projects are housed in process divisions. Such a project might concern new manufacturing methods, and the machining division might serve as the base for a project investigating new methods of removing metal. The same project might be housed in the machining division but include several people from the R & D lab, and be organized as a combination of functional and matrix forms. Pure functional and pure project organizations may coexist in a firm. This results in the mixed form shown in Figure 5-4. This form is rarely observed with the purity we have depicted here, yet it is not uncommon. What is done, instead, is to spin off the large, successful longrun projects as subsidiaries or independent operations. Many firms nurture young, unstable, smaller projects under the wing of an existing division, then wean them to pure projects with their own identity, and finally allow the formation of a venture team—or, for a larger project, venture firm—within the parent company. For example, Texas Instruments did this with the Speak and Spell toy that was developed by one of its employees. The hybridization of the mixed form leads to flexibility. It enables the firm to meet special problems by appropriate adaptation of its organizational structure. There are, however, distinct dangers involved in hybridization. Dissimilar groupings within the same accountability center tend to encourage overlap, duplication, and friction because of incompatibility of interests. Again, we have the conditions that tend to result in conflict between functional and project managers. Figure 5-5 illustrates another common solution to the problem of project organizational form. The firm sets up what appears to be a standard form of functional organization, but it
81721_Ch05.indd 201
9/16/08 12:51:56 AM
202
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
President
Project M
Figure 5-4
Finance
Engineering
Project Z
Manufacturing
“Mixed” organization.
President Project S
Finance
Manufacturing
Engineering
Figure 5-5 Staff organization.
adds a staff office to administer all projects. This frees the functional groups of administrative problems while it uses their technical talents. In a large specialty chemical firm, this organizational form worked so well that the staff office became the nucleus of a full-scale division of the firm. The division’s sole purpose is to administer projects. Much has been written about the use of a “project office” which is an equivalent structure. More will be said about the project office in Section 5.6. In many ways this organizational form is not distinguishable from matrix management, but it is typically used for small, short-run projects where the formation of a full-fledged matrix system is not justified. This mixed form shares several advantages and disadvantages of the matrix structure, but the project life is usually so short that the disease of projectitis is rarely contracted. If the number or size of the projects being staffed in this way grows, a shift to a formal matrix organization naturally evolves. Though the ways of interfacing project and parent organization are many and varied, most firms adopt the matrix form as the basic method of housing projects. To this base, occasional pure, functional, and hybrid projects are added if these possess special advantages in special cases. The managerial difficulties posed by matrix projects are more than offset by their relatively low cost and by their ability to get access to broad technical support.
5.5
CHOOSING AN ORGANIZATIONAL FORM The choice of an organizational form for projects is not addressed to PMs or aspiring PMs. It is addressed to senior management. Very rarely does the PM have a choice about the way the project interfaces with the parent organization. Indeed, the PM is rarely asked for input to the interface choice. Even experienced practitioners find it difficult to explain how one should proceed when trying to choose. The choice is determined by the situation, but even so is partly
81721_Ch05.indd 202
9/16/08 12:51:56 AM
5.5
CHOOSING AN ORGANIZATIONAL FORM
203
intuitive. There are few accepted principles of design, and no step-by-step procedures that give detailed instructions for determining what kind of structure is needed and how it can be built. All we can do is consider the nature of the potential project, the characteristics of the various organizational options, the advantages and disadvantages of each, the cultural preferences of the parent organization, and make the best compromise we can. In general, the functional form is apt to be the organizational form of choice for projects where the major focus must be on the in-depth application of a technology rather than, for example, on minimizing cost, meeting a specific schedule, or achieving speedy response to change. Also, the functional form is preferred for projects that will require large capital investments in equipment or buildings of a type normally used by the function. If the firm engages in a large number of similar projects (e.g., construction projects), the pure project form of organization is preferred. The same form would generally be used for one-time, highly specific, unique tasks that require careful control and are not appropriate for a single functional area—the development of a new product line, for instance. When the project requires the integration of inputs from several functional areas and involves reasonably sophisticated technology, but does not require all the technical specialists to work for the project on a full-time basis, the matrix organization is the only satisfactory solution. This is particularly true when several such projects must share technical experts. But matrix organizations are complex and present a difficult challenge for the PM. If choice of project structure exists, the first problem is to determine the kind of work that must be accomplished. To do this requires an initial, tentative project plan. First, identify the primary deliverable(s) of the project. Next, list the major tasks associated with each deliverable. For each task, determine the functional unit that will probably be responsible for carrying out the task. These are the elements that must be involved in order to carry out the project. The problem is how best to bring them together—or, how best to integrate their work. Additional matters to be considered are the individuals (or small groups) who will do the work, their personalities, the technology to be employed, the client(s) to be served, the political relationships of the functional units involved, and the culture of the parent organization. Environmental factors inside and outside the parent organization must also be taken into account. By understanding the various structures, their advantages and disadvantages, a firm can select the organizational structure that seems to offer the most effective and efficient choice. Since it is our objective in this chapter to provide criteria for the selection of a project organization, we shall illustrate the process with an example using the following procedure. 1. Define the project with a statement of the objective(s) that identifies the major outcomes desired. 2. Determine the key tasks associated with each objective and locate the units in the parent organization that serve as functional “homes” for these types of tasks. 3. Arrange the key tasks by sequence and decompose them into work packages. 4. Determine which organizational units are required to carry out the work packages and which units will work particularly closely with which others. 5. List any special characteristics or assumptions associated with the project—for example, level of technology needed, probable length and size of the project, any potential problems with the individuals who may be assigned to the work, possible political problems between different functions involved, and anything else that seems relevant, including the parent firm’s previous experiences with different ways of organizing projects. 6. In light of the above, and with full cognizance of the pros and cons associated with each structural form, choose a structure.
81721_Ch05.indd 203
9/16/08 12:51:57 AM
204
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
Project Management in Practice Trinatronic, Inc.
Project objective: To design, build, and market a multitasking portable computer containing 32- and 64-bit processors, 1 Gbyte RAM, at least 240 Gbytes HD, at least 3.0 GHz processing speed, have a 17 in. active matrix screen, a built-in cellular 56 Kbps modem capable of simultaneous voice, data, and fax transmission, a read/
A. B. C. D. E. F. G. H. I. J. K. L. M.
Key Tasks Write specifications. Design hardware, do initial tests. Engineer hardware for production. Set up production line. Manufacture small run, conduct quality and reliability tests. Write (or adopt) operating systems. Test operating systems. Write (or adopt) applications software. Test applications software. Prepare full documentation, repair and user manuals. Set up service system with manuals and spare parts Prepare marketing program. Prepare marketing demonstrations.
Without attempting to generate a specific sequence for these tasks, we note that they seem to belong to four categories of work. 1. Design, build, and test hardware.
2. Design, write, and test software. 3. Set up production and service/repair systems with spares and manuals. 4. Design marketing effort, with demonstrations, brochures, and manuals. Based on this analysis, it would appear that the project will need the following elements:
• •
81721_Ch05.indd 204
Groups to design the hardware and software. Groups to test the hardware and write and test the software.
write CD/DVD drive, a 10/100 Mbps network interface card with a built-in 802.11g high performance wireless antenna, at least one IEEE 1394 Firewire port, a state of the art ATI-compatible graphics accelerator with 256-M memory, and a battery life of at least 7 hours. The entire system built to sell at or below $1,500. Organizational Units Mktg. Div. and R & D R&D Eng. Dept., Mfg. Div. Eng. Dept., Mfg. Div. Mfg. Div. and Q.A. Dept., Exec. V.P. staff Software Prod. Div. Q.A. Dept., Exec. V.P. staff Software Prod. Div. Q.A. Dept., Exec. V.P. staff Tech. Writing Section (Eng. Div.) and Tech. Writing Section (Software Prod. Div.) Tech. Writing Section (Eng. Div.) and Tech. Mktg. Div. Mktg. Div.
• • • •
A group to engineer the production system for the hardware. A group to design the marketing program. A group to prepare all appropriate documents and manuals. And, lest we forget, a group to administer all the above groups.
These subsystems represent at least three major divisions and perhaps a half-dozen departments in the parent organization. The groups designing the hardware and the multiple operating systems will have to work closely together. The test groups may work quite independently of the hardware and software designers, but results improve when they cooperate.
9/16/08 12:51:57 AM
5.6
TWO SPECIAL CASES—RISK MANAGEMENT AND THE PROJECT OFFICE
Trinatronics has people capable of carrying out the project. The design of the hardware and operating systems is possible in the current state of the art, but to design such systems at a cost that will allow a retail price of $1,500 or less will require an advance in the state of the art. The project is estimated to take between 18 and 24 months, and to be the most expensive project yet undertaken by Trinatronics. Based on the sketchy information above, it seems clear that a functional project organization would not be appropriate. Too much interaction between major divisions is required to make a single function into a
5.6
205
comfortable organizational home for everyone. Either a pure project or matrix structure is feasible, and given the choice, it seems sensible to choose the simpler pure project organization if the cost of additional personnel is not too high. Note that if the project had required only part-time participation by the highly qualified scientific professionals, the matrix organization might have been preferable. Also, a matrix structure would probably have been chosen if this project were only one of several such projects drawing on a common staff base. Source: S. J. Mantel, III. Consulting project, 2005.
TWO SPECIAL CASES—RISK MANAGEMENT AND THE PROJECT OFFICE Thus far in this chapter it has been tacitly assumed that however the project has been organized, it has, or has access to, sufficient skill, knowledge, and resources to accomplish any activities that may be required. As we shall see, this assumption is not always true. A primary task of the PM is to acquire the resources, technical skills, knowledge, and whatever is needed by the project. While this may be difficult, acquisition of the project’s technical resources is mainly dependent on the PM’s skill in negotiation as described in Chapter 4. Even if the PM has all the resources needed, two problems remain. First, in the entire history of projects from the beginning of time until the day after tomorrow, no project has ever been completed precisely as it was planned. Uncertainty is a way of life for PMs and their projects. Second, the successful execution of a project is a complex managerial task and requires the use of planning, budgeting, scheduling, and control tools with which the neophyte PM may not be completely familiar. In addition, there are contractual, administrative, and reporting duties that must be performed in accord with the law, the wishes of the client, and the rules of the organizational home of the project. Dealing with uncertainties has come to be known as risk management. We introduced the subject in Chapter 2 when the uncertainties of project selection were discussed. To deal with uncertainty, the parent organization must create some mechanism to manage it. In order to deal with the managerial and administrative issues in a way that meets the parent organization’s rules for management and administration, many firms have created the project management office. This section is devoted to the investigation of how risk management activities and project management and administration can be organized in order to perform with efficiency, effectiveness, and consistency.
Risk Management
PMBOK Guide
The Project Management Institute’s (PMI) publication A Guide to the Project Management Body of Knowledge (PMBOK® Guide) 3rd Edition, 2004, states that risk management is “the systematic process of identifying, analyzing, and responding to project risk”* and consists of six subprocesses, and, as we shall see below, a seventh subprocess needs to be added. *It is important for the reader to recall that the word “risk” has two meanings. One relates to the probability that an event will occur. This meaning is associated with decision theory (cf. Chapter 2, Section 2.5). The other is associated with danger or threat. The proper meaning of the word is determined by the context in which it is used.
81721_Ch05.indd 205
9/16/08 12:51:57 AM
206
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
Project Management in Practice Risk Analysis vs. Budget/Schedule Requirements in Australia
Sydney, Australia’s M5 East Tunnel was constructed under strict budgetary and schedule requirements, but given the massive traffic delays now hampering commuters, the requirements may have been excessive. Due to an inexpensive computer system with a high failure rate, the tunnel’s security cameras frequently fail, requiring the operators to close the tunnel due to inability to react to an accident, fire, or excessive pollution inside the tunnel. The tunnel was built to handle
70,000 vehicles a day, but it now carries 100,000 so any glitch can cause immediate traffic snarls. A managerial risk analysis, including the risk of overuse, might have anticipated these problems and mandated a more reliable set of computers once the costs of failure had been included. Source: Project Management Institute. “Polluted Progress,” PM Network, March 2005, p. 1.
1. Risk Management Planning—deciding how to approach and plan the risk management activities for a project. 2. Risk Identification—determining which risks might affect the project and documenting their characteristics. 3. Qualitative Risk Analysis—performing a qualitative analysis of risks and conditions to prioritize their impacts on project objectives. 4. Quantitative Risk Analysis—estimating the probability and consequences of risks and estimating the implications for project objectives. 5. Risk Response Planning—developing procedures and techniques to enhance opportunities and reduce threats to the project’s objectives.
81721_Ch05.indd 206
9/16/08 12:51:58 AM
5.6
TWO SPECIAL CASES—RISK MANAGEMENT AND THE PROJECT OFFICE
207
6. Risk Monitoring and Control—monitoring residual risks, identifying new risks, executing risk reduction plans, and evaluating their effectiveness throughout the project life cycle. Before proceeding, we must add a seventh subprocess, which is our addition, not the PMBOK’s. 7. Create and Maintain a Risk Management Data Bank—a permanent record of identified risks, methods used to mitigate or resolve them, and the results of all risk management activities.
PMBOK Guide
Ward (1999) defines a straightforward method for conducting PMBOK’s six subprocesses that includes a written report on risk management, if not the creation of a risk database. In our opinion, there are two major problems in the way that risk management is carried out by the typical organization that actually does any semiformal risk management. First, subprocess 7 is almost invariably ignored. Second, risk identification activities routinely (1) fail to consider risks associated with the project’s external environment and (2) focus on misfortune, overlooking the risk of positive things happening. If the risk management system has no memory, the task of risk identification will be horrendous. But the system can have a memory—at least the individuals in the system can remember. Relying on the recollections of individuals, however, is risky. To ensure against this particular risk, the risk management system should maintain an up-to-date data bank that includes, but is not restricted to, the following:
• • • • • • •
identification of all environments that may impact on the project identification of all assumptions made in the preliminary project plan that may be the source of risk for the project all risks identified by the risk management group, complete with their estimated impacts on the project and estimates of their probability of occurring a complete list of all “categories” and “key words” used to categorize risks, assumptions, and environments so that all risk management groups can access past work done on risk management the details of all qualitative and quantitative estimates made on risks, on states of the project’s environment, or on project assumptions, complete with a brief description of the methods used to make such estimates minutes of all group meetings including all actions the group developed to deal with or mitigate each specific risk, including the decision to ignore a risk the actual outcomes of estimated risks and the results of actions taken to mitigate risk
If all this work on data collection is going to be of value to the parent organization beyond its use on the project at hand, the database must be available to anyone proposing to perform risk management on a project for the organization. Almost everything a risk management group does for any project should be retained in the risk database. Second, all risks must be categorized, the environments in which projects are conducted must be identified, and the methods used to deal with, augment, or mitigate them must be described. The use of multiple key words and categories is critical because risk information must be available to managers of widely varied disciplines and backgrounds. Organizations may be conducting a great many projects at any given time. If each risk management team has to start from scratch, without reference to what has been learned by previous groups, the management of risk will be extremely expensive, take a great deal of time, and will not be particularly effective. Rest assured that even with all the experience of the past readily available, mistakes will occur. If past experience is not available, the mistakes of the past will be added to those of
81721_Ch05.indd 207
9/16/08 12:51:59 AM
208
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
PMBOK Guide
the future. Unfortunately, the literature of project risk management rarely mentions the value of system memory. (An exception to this generalization is Royer (2000) and the latest version of PMBOK.) The identification of potentially serious risks can be done in a number of ways, but the following method is straightforward and extensively used, particularly in engineering analysis. Risk Identification through Failure Mode and Effect Analysis (FMEA) FMEA (Stamatis, 2003) is the application of a scoring model such as those used for project selection in Chapter 2. It is easily applied to risk by using six steps. 1. List possible ways a project might fail. 2. Evaluate the severity (S) of the consequences of each type of failure on a 10-point scale where “1” is “no effect” and “10” is “very severe.” 3. For each cause of failure, estimate the likelihood (L) of its occurrence on a 10-point scale where “1” is “remote” and 10 is “almost certain.” 4. Estimate the ability to detect (D) a failure associated with each cause. Using a 10 point scale, “1” means detectability is almost certain using normal monitoring/control systems and “10” means it is practically certain that failure will not be detected in time to avoid or mitigate it. 5. Find the Risk Priority Number (RPN) where RPN ⴝ S ⴛ L ⴛ D. 6. Consider ways to reduce the S, L, and D for each cause of failure with a significantly high RPN. An Added Note on Risk Identification The risks faced by a project are dependent on the technological nature of the project, as well as on the many environments in which the project exists. [Recall that we use the word “environment” to refer to anything outside a system (the project) that can affect or be affected by the system.] Indeed, the manner in which the process of risk management is conducted depends on how one or more environments impact the project. The corporate culture is one such environment. So consider, for instance, the impact of a strong corporate “cost-cutting” emphasis on how risk managers identify and deal with risks in the areas of personnel and resource allocation. Note that this refers to the process of risk management—carrying out the six or seven subprocesses—not merely to the identification of risks. The need to consider the many environments of almost any project is clear when one examines the recent articles on risk management. It is typical to consider only the internal environment of the project, e.g., the technical and interpersonal risks, and occasionally, negative market risks for the project. Articles on risks in IT and software projects rarely go beyond such matters—Jiang et al. (2001) is an example. This is a thoughtful development of a model for generating numerical measures for IT project risks. The specific user of the IT and the institutional setting of the project are considered, but competitors, the IT market, user industries, the legal environment, and several other relevant environments are ignored. Organizing for Risk Management The mere existence of a set of activities that must be undertaken in order to manage risk implies that some sort of organization is required to do the work of risk management. Because any individual firm might undertake a wide variety of projects based on different technologies, developed for different markets, subject to potential regulation by different levels of government, and with different stakeholders, no single risk management unit can be expected to deal with all projects. Routine machine repair and maintenance projects (if they are similar in size and scope to one another) might have one risk management group for all such projects. In general, however, a unique risk management group is formed for each project.
81721_Ch05.indd 208
9/16/08 12:51:59 AM
5.6
TWO SPECIAL CASES—RISK MANAGEMENT AND THE PROJECT OFFICE
209
The specific membership of this group depends on the nature of the project. If the project’s objective is to develop a new product (or product line), the risk management team might include the following: (1) a specialist in the science or technology of the proposed product; (2) a market specialist who can make an informed estimate of the total market size and amount of sales for the potential product as well as the impact that the proposed product may have on the sales of the firm’s other products, and the state of potential competition; (3) a manufacturing specialist who can foresee risks in the firm’s (or its subcontractor’s) ability to manufacture the product with an acceptable level of quality; (4) a purchasing specialist who can foresee risks in the firm’s supply chain; (5) a product safety expert to foresee risks in the area of product liability as well as a public relations professional and an attorney to help deal with matters if safety claims are made against the firm; (6) a patent attorney to assess the risks of patent infringement; (7) an individual (perhaps a program manager) who understands the complete set of the firm’s projects and can identify any projects that might contribute to or profit from the project in question; (8) the same or a different person who can foresee possible personnel, resource, or scheduling conflicts caused by or threatening this project; and (9) a governmental relations expert who knows what governmental licenses or approvals may be required for manufacturing processes or product release. Clearly, some of the above members might only attend meetings during the risk identification and response planning sessions. The group could investigate the potential product’s window-of-opportunity that we discussed in Chapter 2 as a way of estimating market risk. If we had chosen a different project, say a process improvement, the list of risk management group members would have included some with the same expertise as above and some with others. For example, the group would need to include industrial engineers who could understand risks affecting the ability to maintain current production schedules while installing a new machine in the production system, financial experts to look for potential glitches in the estimated cash flows, a specialist in air and water pollution to foresee risks in those areas, and potential users of the process. It is never too early in the life of a project to begin managing risk. A sensible project selection decision cannot be made without knowledge of the risks associated with the project. Therefore, the risk management plan and initial risk identification must be carried out before the project can be formally selected for support. The risk management group must, therefore, be formed as soon as a potential project is identified. At first, project risks are loosely defined—focusing for the most part on externalities such as the state of technology in the fields that are important to the project, business conditions in the relevant industries, and so forth. The response to external risks is usually to track the pertinent environments and estimate the chance that the project can survive various conditions. Not until the project is in the planning stage will such risks as those associated with project technology, schedule, budget, and resource allocation begin to take shape. The actual development of a risk management plan will be discussed in Chapter 6. Because risk management often involves analytic techniques not well understood by PMs not trained in the area, some organizations put risk specialists in a project office, and these specialists staff the project’s risk management activities. For a spectacularly successful use of risk management on a major project, see Christensen et al. (2001), a story of risk management in a Danish bridge construction project. Dealing with Disaster Thus far, we have focused mainly on risks that might be considered normal for any firm undertaking projects. We have dealt with these risks by using an “expected value” approach to a cost/benefit analysis, as in the PsychoCeramic Sciences example, that is, the estimated loss (or gain) associated with a risky output times the probability that the loss (or gain) will occur. We might also compare the expected loss associated with a risk
81721_Ch05.indd 209
9/16/08 12:51:59 AM
210
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
to the associated expected cost of mitigating or preventing the loss associated with the risk. If the reduction in expected loss is greater than the cost of risk mitigation or prevention, we would invest in risk prevention. What about the case when the loss is catastrophic, even potentially ruinous, though it may have a very low probability of occurring; e.g., a run on a bank; a strike at a critical supplier’s plant; a flood that shuts down a construction project; an attack by a terrorist group on a building; or the discovery that a substance in a complex drug might cause toxic side effects? In many such cases, the cost of the risk may be massive, but the likelihood that it will occur is so small that the expected cost of the disaster is much less than many smaller, more common risks with far higher probabilities of occurring. An excellent book, The Resilient Enterprise (Sheffi, 2005), deals with risk management concerning many different types of disasters. The book details the methods that creative businesses have used to cope with catastrophes that struck their facilities, supply chains, customer bases, and threatened their survival. The subject is more complex than we can deal with here, but we strongly recommend the book, a “good read” to use a reviewer’s cliché.
The Project Management Office With the increasing role of projects in today’s organizations and the move toward “management by projects,” the need has arisen for an organizational entity to help manage these fastmultiplying forms of getting work done. This is the role of the Project Management Office (PMO), a.k.a. the Project Office, the Program Management Office, the Project Support Office, and so on. There are a variety of forms of PMOs to serve a variety of needs. Some of these are at a low level in the organization and others report to the highest levels. The best PMOs (Baker, 2007) have some common characteristics, however, including the traits of being run like the best businesses (a business plan, focused, emphasis on results), enjoying strong executive support, being future-oriented learning organizations, and offering the best project leadership in the organization.
Project Management in Practice A Project Management Office Success for the Transportation Security Administration
The Transportation Security Administration (TSA) had only 3 months and $20 million to build a 13,500 square foot coordination center, involving the coordination of up to 300 tradespeople working simultaneously on various aspects of the center. A strong Project Management Office (PMO) was crucial to making the effort a success. The PMO accelerated the procurement and approval process, cutting times in half in some cases. They engaged a team leader, a master scheduler, a master financial manager, a
81721_Ch05.indd 210
procurement specialist, a civil engineer, and other specialists to manage the multiple facets of the construction project, finishing the entire project in 97 days and on budget, receiving an award from the National Assn. of Industrial and Office Properties for the quality of its project management and overall facility. Source: Project Management Institute. “PMO Speeds Success for Transportation Facility,” PM Network, May 2004, p. 1.
9/16/08 12:52:00 AM
5.6
TWO SPECIAL CASES—RISK MANAGEMENT AND THE PROJECT OFFICE
211
Purposes of the Project Management Office Before discussing the purpose and services offered by PMOs, consider the following statistics reported by Block et al. (2001). When asked the reasons for initiating a PMO, almost two-thirds of the respondents indicated a need for establishing consistent project management standards and methods, and that the PMO was initiated by senior management direction. About half the respondents also indicated a need to eliminate project delays and correct poor project planning. A bit less than 40 percent wanted to improve project performance and eliminate cost overruns. Last, about a quarter of the respondents indicated they wished to reduce customer dissatisfaction. A major contribution of PMOs is to establish project administration procedures for selecting, initializing and planning, budgeting, and scheduling projects as well as to serve as a repository for reports on the performance of the planning, budgeting, scheduling, and resource allocation processes. PMO files also often contain reports on risk management, project audits, evaluations, and histories, all of which will be discussed in later chapters. PMOs can offer a variety of services (described in detail a bit later). As reflected by the reasons for initiating the PMOs in the first place, 78 percent of the respondents to Block et al. (2001) indicated that their PMO established and maintained standard project processes (practices and procedures), 64 percent offered consulting help on projects, and 58 percent offered training and mentoring services. About half performed project tracking and somewhat less conducted portfolio management. Only 28 percent maintained a stable of project managers for future project needs. Although specific goals may be articulated for the PMO, the overarching purpose is often inherent in the process itself and is unarticulated, for example, ensuring that the firm’s portfolio of projects supports the organization’s overall goals and strategy, as described in Chapter 2. In this case, the PMO is the critical tie between strategic management and the project managers. Another overarching purpose may be the gradual assimilation of good project management practice into the entire organization, moving it from a functionally organized to a project based form, not only in structure but in culture as well. It is important to note in the above that the role of the PMO is that of an enabler/facilitator of projects, not the doer of projects. Top management cannot allow the PMO to usurp the technical aspects—scheduling, budgeting, etc.—of running the project. Those are the project manager’s responsibility. Although the PMO may, on occasion, become involved in some project management tasks, it should be for the purpose of facilitating liaison with top management, not to do the work of the project team. Tasks of the Project Management Office To achieve its goals, PMOs commonly perform many of the following tasks (Block, 1999):
• • • • • • • • •
81721_Ch05.indd 211
Establish and enforce good project management processes such as procedures for bidding, risk analysis, project selection, progress reports, executing contracts, and selecting software Assess and improve the organization’s project management maturity Develop and improve an enterprise project management system Offer training in project management and help project managers become certified Identify, develop, and mentor project managers and maintain a stable of competent candidates Offer consulting services to the organization’s project managers Help project managers with administrative details such as status reports Establish a process for estimation and evaluation of risk Determine if a new project is a good “fit” for the changing organization
9/16/08 12:52:00 AM
212
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
• • • • • • • • •
Identify downstream changes (market, organization) and their impacts on current projects: Are the projects still relevant? Is there a need to change any project’s scope? Are there any cost effects on the projects? Review and manage the organization’s project risk portfolio, including limiting the number of active projects at any given time and identifying and reining in runaway projects as well as managing potential disasters Conduct project reviews and audits, particularly early in each project’s life cycle, and report project progress relative to the organization’s goals Maintain and store project archives Establish a project resource database and manage the resource pool Serve as a champion to pursue project management excellence in the organization and encourage discussion on the value of individual projects in the firm Serve as a “home” for project managers to communicate with each other and with PMO staff Collect and disseminate information and techniques reported in project evaluations that can improve project management practices Assist in project termination
Not all of these goals can be achieved at once. In the short term, or the first few months, the PMO will only be able to assess the organization’s current project management practices and perhaps evaluate the progress of each of the organization’s many projects. In the midterm, the PMO can start standardizing project management processes and procedures, begin helping individual projects with, for example, risk analysis and administrative details, and perhaps initiate a strategic portfolio analysis of the current projects. In the long term, or after about a year, the more comprehensive tasks may be undertaken, such as assembling a resource database, training project managers, conducting project audits, and consulting on individual projects. In our opinion, it would be rare for a PMO to handle, or try to handle, all of the above matters. Rather a great many control the Project Selection Process and manage a few other project related matters, e.g., maintaining project records and archives, handling risk management, and/or training new project managers. An experienced consultant told us: Lately, in my travels, in most companies I come across it is the PMO’s major role to create and facilitate the methodology of the Project Selection Process in order to support upper-management’s decision making. The PMO evaluates all proposed initiatives against the company’s goals, estimates costs, and proves the business’s proposed ROI if the initiative is funded. Once a project is selected, the PMO shifts its effort to determining if the project is meeting all of its objectives. Many PMOs do little or no direct project management support of projects as they are being carried out, but PMOs do conduct several major evaluations of all projects in a portfolio, both during the projects’ life cycles and after the fact, to see if they achieve what they said they would during the selection process. Forms of Project Management Office Akin to the time phasing of PMO responsibilities just noted, there are various forms of PMOs that have similar responsibilities. That is, some organizations may only want a limited PMO that represents an information center, reporting on project progress and assessing the organization’s project maturity. At the next level, the PMO may establish project management procedures and practices, promulgate lessons learned from prior projects, create a database for risk analysis, help project managers with administrative and managerial matters, and possibly even offer basic training in project
81721_Ch05.indd 212
9/16/08 12:52:00 AM
5.7
THE PROJECT TEAM
213
management. At the upper level, the PMO may establish a resource database and monitor interproject dependencies, manage the project portfolio to ensure attainment of the organization’s goals, audit and prioritize individual projects, and generally establish an enterprise project management system. Another way of organizing the PMO has to do with the reporting level of the office. If top management wants to test the efficacy of a PMO at a lower level before approving it for the organization as a whole, they may place it in a functional department such as Information Technology or Engineering. In this role, the main responsibility of the PMO will be to help the department’s project managers with their individual projects. If the PMO is established at the business level, it may take on more responsibility for good project management practices and possibly offer basic training. At higher organizational levels, the PMO’s responsibilities will broaden and become less tactical and more strategic. If the eventual goal is to improve the organization’s ability to execute projects, this is a risky way to implement a PMO. Simply because a PMO is not able to rescue a failing engineering project, for example, does not mean that it could not be extremely valuable to the organization by performing the many preceding tasks. Implementing the Project Management Office As was noted previously, the best way to implement a PMO is to treat it as a project and apply good project management procedures. In addition, given the role of this special type of project, it is also suggested that the effort not be initiated until it has the full commitment of the top managers of the organization. It should also have a senior management sponsor/champion who is determined to see this project through to success. One way to initiate the project is through a pilot program in one of the areas that falls under the responsibility of the PMO project champion. Following its completion, the pilot project can be assessed, any mistakes corrected, and the benefits publicized to the rest of the organization. As the PMO expands and interacts with more and more projects, its benefits to the organization will increase progressively with its reach. Liu et al. (2007) have shown that PMOs have a significantly positive impact on projects operating with high task uncertainty. The positive impact of PMOs decreases as task uncertainty diminishes. Unfortunately, not all PMOs are successful. According to Tennant (2001), one of the primary problems of PMOs is that the executives who establish PMOs often do not understand project management practices themselves. Thus, they have unrealistic expectations of the PMO, such as providing temporary help for a project in trouble or to obtain cost reductions from on-going projects. The PMO is not a quick fix for saving projects that are failing; its primary objective is to improve project management processes over the long run. PMOs cannot be expected to correct upper management failures such as inappropriate project goals, insufficient project support, and inadequate resource availability. Interestingly, a recent trend in project organizations is the outsourcing of the PMO functions themselves. One has to wonder if this is a sign of impending trouble or a wise recognition of the limitations of upper management knowledge.
5.7
THE PROJECT TEAM “Teamwork is a lot of people doing what I say.” Anonymous Boss
In this section we consider the makeup of the project team, bearing in mind that different projects have vastly different staff needs. Then we take up some problems associated with staffing the team. Last, we deal with a few of the behavioral issues in managing this team.
81721_Ch05.indd 213
9/16/08 12:52:00 AM
214
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
To be concrete during our discussion of project teams, let us use the example of a software engineering project to determine how to form a project team. Assume that the size of our hypothetical project is fairly large. In addition to the PM, the following key team members might be needed, plus an appropriate number of systems architects, engineers, testers, clerks, and the like. This example can be applied to a construction project, a medical research project, or any of a wide variety of other types of projects. The titles of the individuals would change, but the roles played would be similar.
• • • •
•
•
Systems Architect The systems architect is in charge of the basic product design and development and is responsible for functional analysis, specifications, drawings, cost estimates, and documentation. Development Engineer This engineer’s task is the efficient production of the product or process the project engineer has designed, including responsibility for manufacturing engineering, design and production of code, unit testing, production scheduling, and other production tasks. Test Engineer This person is responsible for the installation, testing, and support of the product (process) once its engineering is complete. Contract Administrator The administrator is in charge of all official paperwork, keeping track of standards compliance (including quality/reliability), customer (engineering) changes, billings, questions, complaints, legal aspects, costs, and negotiation of other matters related to the contract authorizing the project. Not uncommonly, the contract administrator also serves as project historian and archivist. Project Controller The controller keeps daily account of budgets, cost variances, labor charges, project supplies, capital equipment status, etc. The controller also makes regular reports and keeps in close touch with both the PM and the company controller. If the administrator does not serve as historian, the controller can do so. Support Services Manager This person is in charge of product support, subcontractors, data processing, purchasing, contract negotiation, and general management support functions.
Of these top project people, it is most important that the systems architect and the project controller report directly to the PM (see Figure 5-6). This facilitates control over two of the main goals of the project: technical performance and budget. (The project manager is usually in personal control of the schedule.) For a large project, all six project officials could work out of the project office and report directly to the PM. To staff the project, the PM works from a forecast of personnel needs over the life cycle of the project. This is done with the aid of some special charts. First, a work breakdown structure (WBS) is prepared to determine the exact nature of the tasks required to complete the project. (The WBS is described in detail and illustrated in Chapter 6.) The skill requirements for these tasks are assessed and like skills are aggregated to determine work force needs. Be warned that development of the WBS will often involve consultations with senior programmers and testers. The PM needs to understand, plan for, and closely monitor the effects on current projects of these consultations. It is common for senior programmers and testers to be pulled away from their own work in order to deal with planning crises arising elsewhere in the WBS. From this base, the functional departments are contacted to locate individuals who can meet these needs. On occasion, certain tasks may be subcontracted. This option may be adopted because the appropriately skilled personnel are unavailable or cannot be located, or subcontractors
81721_Ch05.indd 214
9/16/08 12:52:01 AM
5.7
THE PROJECT TEAM
215
can deliver for lower cost, or even because some special equipment required for the project is not available in-house. The need to subcontract is growing as firms “downsize.” If the proper people (and equipment) are found within the organization, however, the PM usually must obtain their services from their home departments. Many firms insist on using “local” resources when they are available, in order to maintain better control over resource usage and quality. Typically, the PM will have to negotiate with both the department head and the employee, trying to “sell” the employee on the challenge and excitement of working on the project and trying to convince the department head that lending the employee to the project is in the department head’s best interest. There are some people who are more critical to the project’s success than others and should report directly to the PM or to the PM’s deputy (often the project’s architect):
• • •
Senior project team members who will be having a long-term relationship with the project Those with whom the PM will require continuous or close communication Those with rare skills necessary to project success.
Remember that the PM must depend on reason when trying to convince a department head to lend these valuable people to the project. The department head, who sees the project as a more or less glamorous source of prestige in which the department cannot share, has little natural motivation to be cooperative. Once again, project success depends on the political skill of the PM as much as on the technical skill of the team. Thus far, we have tacitly assumed a fairly strong matrix organization for the project in our example. In recent years, the use of weaker matrices has become more and more frequent. In many firms, when project managers are asked for the number of people who report directly to them, the answer “None!” is not uncommon. Most common of all, it seems to us, is the matrix organization with a project manager, one or two key skilled contributors who may be full-time members of the project, and a wide variety of services or capacity supplied to the project by functional groups in the parent organization. Such structures are often found in R&D projects that are part of larger programs being carried out by a parent firm. In a pharmaceutical project, for example, one or two senior scientists and laboratory technicians may be assigned to the project, but the work involved in toxicity testing, efficacy testing, and writing the product insert is supplied to the project in the form of deliverables from functional units rather than people assigned directly to the project to carry out the work.
Project manager
81721_Ch05.indd 215
Systems architect
Project controller
Development engineer
Contract administrator
Test engineer
Support services manager
Figure 5-6 Typical organization for software projects.
9/16/08 12:52:01 AM
216
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
Although the project manager has to bargain for fewer individuals than in the case of stronger matrices, the PM’s negotiating skills are just as critical. It is typical for the success of weak-matrix projects to be dependent on the skills of the few technical specialists who are assigned directly to the project. The ability of the PM to negotiate for skilled technicians as well as for the timely delivery of services from functional departments is a key determinant of success.
Project Management in Practice The Empire Uses Floating Multidisciplinary Teams
Lucasfilm Ltd., the creators of Star Wars, needs quickmoving, flexible, multidisciplinary teams of insiders and freelance outsiders to execute short-lived, rapidly forming and dissolving projects. Standard project management approaches are too slow for this kind of environment. They need the ability to quickly assemble teams to execute specific functions and then reassemble to fit the next set of tasks. To do this, Lucasfilm moved all their disparate units into a $350 million singleroofed complex so they can all interact as the tasks of
81721_Ch05.indd 216
the moment require. Managers are rootless, sweeping through office suites scattered throughout the building, depending on the talents needed for the next project. As the relentless pressure of meeting higher performance levels with tighter schedules and budgets increases for projects, this model may be the future for project management organization and leadership. Source: B. Hindo, “The Empire Strikes at Silos,” Business Week, August 20 & 27, 2007.
9/16/08 12:52:01 AM
5.8
5.8
HUMAN FACTORS AND THE PROJECT TEAM
217
HUMAN FACTORS AND THE PROJECT TEAM With a reminder of the need for the PM to possess a high level of political sensitivity, we can discuss some other factors in managing project teams, all the while remembering that the principles and practices of good, general management also apply to the management of projects. We discuss them from the viewpoint of the PM as an individual who must cope with the personal as well as the technical victories and frustrations of life on a project. Meeting schedule and cost goals without compromising performance appears to be a technical problem for the PM. Actually, it is only partly technical because it is also a human problem—more accurately, a technical problem with a human dimension. Project professionals tend to be perfectionists. It is difficult enough to meet project goals under normal conditions, but when, out of pride of workmanship, the professionals want to keep improving (and thus changing) the product, the task becomes almost impossible. Changes cause delays. Throughout the project, the manager must continue to stress the importance of meeting due dates. It also helps if the PM establishes, at the beginning of the project, a technical change procedure to ensure control over the incidence and frequency of change. (It would not, however, be wise for the PM to assume that everyone will automatically follow such a procedure.) More on this subject in Chapters 6 and 11. Another problem is motivating project team members to accomplish the work of the project. As we noted in Chapter 3 and in the discussion of matrix organizations in this chapter, the PM often has little control over the economic rewards and promotions of the people working on the project. This is certainly true when the matrix is weak. This does not, however, mean that the PM cannot motivate members of the project team. Frederick Herzberg, who studied what motivates technical employees such as engineers, scientists, and professionals on a project team, contends that recognition, achievement, the work itself, responsibility, advancement, and the chance to learn new skills are motivators (see Herzberg, 1968). It is the PM’s responsibility to make sure that project work is structured in such a way as to emphasize these motivational factors. We have also found that the judicious use of “thank you” notes from the PM to those functional managers who have supplied the project with capable and committed individuals and/or effective and efficient capacity is a potent motivator—copies to the relevant individuals and to the functional manager’s boss, of course. It is also important not to write such notes for mediocre or poor performance. Indeed, an occasional “non-thank you” note may be in order. The use of participative management is also a way of motivating people. This is not a new theory. It originated in the work of Argyris, Likert, McGregor, and others in the 1950s and 1960s. The concept suggests that the individual worker (or team) should play a significant role in deciding what means should be employed in meeting desired ends, and in finding better ways of accomplishing things. Management By Objectives (MBO) was an early mechanism designed to develop participative management. MBO allowed the worker to take responsibility for the design and performance of a task under controlled conditions. More recently, such programs as Six Sigma, Employee Involvement (EI), and Total Quality Management (TQM) have been developed that do not suffer from some of the problems associated with MBO. In addition to Six Sigma, TQM, and EI, a.k.a. continuous improvement teams (CIT), we also have observed the rise of self-directed teams (SDT), a.k.a. self-directed work teams (SDWT), and/or self-managed teams (SMT). While these teams may have slightly different structures and may vary somewhat in the amount of decision-making authority and autonomy exercised by the team, they are all aimed at improving worker performance as well as improving production methods and product quality.
81721_Ch05.indd 217
9/16/08 12:52:02 AM
218
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
The adoption of such methods empowers the team (as well as its individual members) to take responsibility and to be accountable for delivering project objectives. Some advantages of empowerment for project teams are: 1. It harnesses the ability of the team members to manipulate tasks so that project objectives are met. The team is encouraged to find better ways to do things. 2. Professionals do not like being micromanaged. Participative management does not tell them how to work but, given a goal, allows them to design their own methods (usually within some constraints on their authority). 3. The team members know they are responsible and accountable for achieving the project deliverables. 4. There is a good chance that synergistic solutions will result from team interaction. 5. Team members get timely feedback on their performance. 6. The PM is provided a tool for evaluating the team’s performance. All of these items serve to increase motivation among members of the project team. Informal discussions with many project team leaders lead us to the same conclusions, but the success of SDWTs (and all other teams) is ultimately dependent on a clear statement of what the team is expected to accomplish, when, and at what cost. Senior management must “make the effort to clearly delineate project goals, responsibilities, and authority” in order to reap the advantages of project teams (Ford et al., 1992, p. 316; Nelson, 1998, p. 43). Finally, it is important to remember that giving a project to a team does not supersede the need for competent project management skills. In Chapter 6, we cover the process of planning projects in detail, and we emphasize the use of an action plan or WBS, concepts more or less borrowed from MBO. It is a detailed planning and scheduling technique directed toward achievement of the objectives of the project. The PM works with members of the project team and a comprehensive set of written plans is generated by this process. The resulting document is not only a plan, but also a control mechanism. Because the system of developing the plan is participative and makes team members accountable for their specific parts of the overall plan, it motivates them, and also clearly denotes the degree to which team members are mutually dependent. The importance of this latter outcome of the planning process is not well recognized in the literature on team building. Bringing people together, even when they belong to the same organization and contribute their efforts to the same objectives, does not necessarily mean that they will behave like a team. Organizing the team’s work in such a way that team members are mutually dependent and recognize it, will produce a strong impetus for the group to form a team. Project success will be associated with teamwork, and project failure will surely result if the group does not work as a team.* If many or most of the team members are also problem oriented (see also Chapter 3, Section 3.2), the likelihood of the group forming an effective team is further increased. In an extensive research on the matter, Tippet et al. (1995) conclude that overall results show that companies are generally doing a poor job of team building. Lack of effective rewards, inadequate individual and team performance feedback mechanisms, and
*Though team formation is not even mentioned, a reading of A. S. Carlisle’s (1976) article, “MacGregor,” is instructive. The article is a classic on the power of delegation and was clearly the inspiration for Blanchard and Johnson’s The One Minute Manager. The Carlisle paper reports on a plant manager who delegates most operating decisions to his subordinates and insists that they help in solving one another’s problems. As a result, they form a team that would be the envy of any project manager.
81721_Ch05.indd 218
9/16/08 12:52:02 AM
5.8
HUMAN FACTORS AND THE PROJECT TEAM
219
DILBERT: © Scott Adams/Dist. by United Feature Syndicate, Inc.
inadequate individual and team goal-setting are all weak areas (Tippet, 1995, p. 35). Finally, Lencioni (2002) has written a wonderful little book on team building that he describes as “a leadership fable.” If one can read only one work on teams, this is our first choice. Another behavioral problem for the PM is interpersonal conflict. The problem is so pervasive that conflict between project team members, and between team members and outsiders (including the client) seems to be the natural state of existence for projects. It is our strong feeling that the PM who cannot manage conflict is doomed to failure. Negotiation, as we have indicated before, is the PM’s primary tool for resolving conflict, but we caution the reader once again that conflict may be a highly creative force in a project team, particularly when it is controlled by an astute PM. In 1975, Thamhain et al. (1975) published the definitive work on the focus and nature of conflict in projects. We have found their insights just as relevant today as they were in 1975. Table 5-1, based on Thamhain et al., relates the most likely focus of conflict to specific stages of the project life cycle. The table also suggests some solutions. When the project is first organized, priorities, procedures, and schedules all have roughly equal potential as a focus of conflict. During the buildup phase, priorities become significantly more important than any other conflict factor; procedures are almost entirely established by this time. In the main program phase, priorities are finally established and schedules are the most important cause of trouble within the project, followed by technical disagreements. Getting adequate support for the project is also a point of concern. At project finish, meeting the schedule is the critical issue, but interpersonal tensions that were easily ignored early in the project can suddenly erupt into conflict during the last hectic weeks of the life cycle. Worry about reassignment exacerbates the situation. Both Tables 5-1 and 5-2 show conflict as a function of stage in the project life cycle as well as by source of the conflict, but Table 5-2 also shows the frequency of conflict by source and stage of the life cycle. Figure 5-7 illustrates these tables. It seems clear to us that most of the conflict on project teams is the result of individuals focusing on the project through the eyes of their individual discipline or department (de Laat, 1994; Hughes, 1998; and Pelled et al., 1994). Such people are not problem oriented and thus are rarely effective members of project teams. Dewhurst (1998, p. 34) defines a group of individuals working independently as a “Name-Only-Team” or a “NOT.” If teamwork is vital to success, then for a NOT, the “work group math (is) 2 2 3 or less.” The infighting that results when discipline-oriented individuals introduce conflict to a project team is perceived by most team members to be “political.” If the PM allows project decisions to be dictated by the infighting, the project is apt to fail (de Laat, 1994; Pinto, 1997, p. 31).
81721_Ch05.indd 219
9/16/08 12:52:03 AM
220
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
Table 5-1.
Major Sources of Conflict during Various Stages of the Project Life Cycle Major Conflict Source and Recommendations for Minimizing Dysfunctional Consequences
Life Cycle Phase
Conflict Source
Project formation
Priorities
Recommendations
Clearly defined plans. Joint decision making and/or consultation with affected parties. Stress importance of project to organization goals. Develop detailed administrative operating procedures to be followed in conduct of project. Secure approval from key administrators. Develop statement of understanding or charter. Develop schedule commitments in advance of actual project commencement. Forecast other departmental priorities and possible impact on project. Provide effective feedback to support areas on forecasted project plans and needs via status review sessions. Schedule work breakdown packages (project subunits) in cooperation with functional groups. Contingency planning on key administrative issues. Continually monitor work in progress. Communicate results to affected parties. Forecast problems and consider alternatives. Identify potential trouble spots needing closer surveillance. Early resolution of technical problems. Communication of schedule and budget restraints to technical personnel. Emphasize adequate, early technical testing. Facilitate early agreement on final designs. Forecast and communicate staffing requirements early. Establish staffing requirements and priorities with functional and staff groups. Close schedule monitoring in project life cycle. Consider reallocation of available staff to critical project areas prone to schedule slippages. Attain prompt resolution of technical issues that may affect schedules. Develop plans for reallocation of people upon project completion. Maintain harmonious working relationships with project team and support groups. Try to loosen up high-stress environment.
Procedures
Schedules Buildup phase
Priorities Schedules Procedures Schedules
Main program
Technical
Labor Phaseout
Schedules
Personality and labor Source: Thamhain et al., 1975.
Table 5-2.
Number of Conflicts during a Sample Project Phase of Project
Start
27 26 18 21 20 25 16
Early
Main
Late
35 27 26 25 13 29 19
24 15 31 25 15 36 15
16 09 11 17 11 30 17
Sources of Conflict
Project priorities Admin. procedures Technical trade-offs Staffing Support cost estimates Schedules Personalities
Source: Thamhain et al., 1975.
81721_Ch05.indd 220
9/16/08 12:52:03 AM
5.8
HUMAN FACTORS AND THE PROJECT TEAM
221
.4
Average total conflict
Start
Figure 5-7
Schedules Priorities Labor Technical Procedures Cost Personality
Schedules Priorities Labor Technical Procedures Cost Personality
.1
Schedules Priorities Labor Technical Procedures Cost Personality
.2 Conflict over schedules Conflict over priorities Conflict over labor Conflict over tech. opinions Conflict over procedures Conflict over cost Personality conflict
Conflict intensity
.3
At the project formation
At the early program phases
During the main program
Toward the end of the program
Program life
Time
Finish
Conflict intensity over the project life cycle. Source: Thamhain et al., 1975.
Project Management in Practice South African Repair Success through Teamwork
When a fire broke out in the carbonate regeneration column in a major facility of Sasol, a leading South African coal, chemical, and crude-oil company, it was crucial to get it fixed immediately. It was determined that the damaged portion of the 19-foot-wide, 231-foot-long column would have to be cut out and replaced before the facility could operate again. Time was of the essence, and only 40 days were allowed for the repair project. To achieve this unheard-of schedule, a number of special ground rules were established:
• • •
The project is to be schedule-driven, not cost-driven There is no float anywhere on the project Always plan to reduce scheduled times, not meet them
• • • •
Resources are not to be considered as a limitation Communication will be continuous across all levels Safety will not be compromised Quality will not be compromised
In addition, special effort was directed toward making the project team strive to reduce time on the project. First, it was made clear that a higher premium would be placed on team performance than on individual performance. The “soft” aspects of management were always taken into consideration: making sure transport was available, accommodations were acceptable, food was available, excessive overtime was avoided, communication forms matched each (Continued)
81721_Ch05.indd 221
9/16/08 12:52:03 AM
222
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
member’s preferences (verbal, phone, written, etc.), and so on. A communication board was installed and updated twice daily to communicate project progress, and especially time saved on the schedule with the person’s name who achieved it. There were both twice-daily shift change meetings, where each shift communicated with the previous shift about progress and problems, and twice-daily planning meetings where the work activities of the next two days were planned in minute detail. The response to this level of project team attention was overwhelming. People raised ideas for saving even five minutes on the schedule. Enthusiasm for the project, and saving project time, became the dominant culture. As a result, the project was completed in only 25 days, 15 days early, with a corresponding cost savings of over $21 million out of an $85 million budget. Source: I. Boggon, “The Benfield Column Repair Project,” PM Network, February 1996, pp. 25–30.
Benfield facility, with columns at the left and right.
Conflict can be handled in several ways, but one thing is certain: Conflict avoiders do not make successful project managers. On occasion, compromise appears to be helpful, but most often, gently confronting the conflict is the method of choice. Much has been written about conflict resolution and there is no need to summarize that literature here beyond noting that the key to conflict resolution rests on the manager’s ability to transform a win-lose situation into win-win.
SUMMARY This chapter described the various organizational structures that can be used for projects, and detailed their advantages. An appropriate procedure for choosing the best form was described and two examples were given. The chapter then moved into a discussion of risk management and the role of the Project Management Office. Following this, discussion turned to the project team itself, describing the organization of the project office staff and the human issues, such as motivation and conflict, the project manager will face. Specific points made in the chapter were these: If the project is to be included in a functional organization, it should be placed in that unit with the greatest interest in its success or the unit that can provide the most help. Though there are advantages in this mode of organizing, the disadvantages are greater. The project form of organizing has its advantages and disadvantages. Though the disadvantages are not as severe as with the functional form, they are nevertheless significant.
81721_Ch05.indd 222
The matrix organization combines the functional and project forms in an attempt to reap the advantages of each. While this approach has been fairly successful, it also has its own unique disadvantages. There are many variants of the pure forms of organization, and special hybrids are commonly used to handle special projects. The best form for a particular case requires consideration of the characteristics of the project compared with the various advantages and disadvantages of each form. A useful procedure for selecting an organizational form for a project is: 1. Identify the specific outcomes desired. 2. Determine the key tasks to attain these outcomes and identify the units within the parent organization where these tasks would normally be assigned. 3. Sequence the key tasks and group them into logical work steps.
9/16/08 12:52:04 AM
GLOSSARY
4. Determine which project subsystems will be assigned which steps and which subsystems must closely cooperate. 5. Identify any special firm or project characteristics, constraints, or problems that may affect how the project should be organized. 6. Consider all the above relative to the pros and cons of each organizational form as a final decision is made. Every project should have a project office, even if it must be shared with another project. Larger, more complex projects may include, in addition to the PM, a project engineer, manufacturing engineer, field manager, contract administrator, project controller, and support service manager. If an organization engages in multiple projects, a Project Management Office may also be warranted. Those on the project team who should report directly to the PM are the project engineer and project controller as well as:
223
2. Those with whom the PM will be continuously or closely communicating. 3. Those with rare skills needed for project success. Perfectionism, motivation, and conflict are often the major behavioral problems facing the PM. Management by Objectives (MBO) can be a useful tool for addressing the first two, while gentle confrontation usually works best for the latter. Sources of project conflict are often priorities and policies at first, schedule and technical problems during the main phase, and schedule and personal issues near termination. In the next chapter, we move from organizational issues to project planning tasks. We address the topics of coordination, interface management, and systems engineering. We also present some extremely useful concepts and tools such as the work breakdown structure and linear responsibility chart.
1. Senior team members who will have a long-term relationship with the project.
GLOSSARY Action Plan A detailed plan of what needs to be done and when (see Chapter 6 for more discussion and some examples). Concurrent/Simultaneous Engineering Originally, the use of a design team that included both design and manufacturing engineers, now expanded to include staff from quality control, purchasing, and other relevant areas. Functional Management The standard departments of the organization that represent individual disciplines such as engineering, marketing, purchasing, and so on. Holistic The whole viewed at one time rather than each piece individually. Management by Objectives (MBO) A management approach popular during the 1960s that encouraged managers to give their subordinates more freedom in determining how to achieve task objectives. Matrix Organization A method of organizing that maintains both functional supervisors as well as project supervisors. A strong matrix operates closer to a pure project organization while a weak matrix operates more like a functional organization. Mixed Organization This approach includes both functions (disciplines) and projects in its hierarchy.
81721_Ch05.indd 223
Parent Organization The firm or organization within which the project is being conducted. Program Manager This person is typically responsible for a number of related projects, each with its own project manager. Project Management Office An office to deal with multiple projects and charged with improving the project management maturity and expertise of the organization, as well as increasing the success rate of projects. Projectitis A social phenomenon, inappropriately intense loyalty to the project. Subcontract Subletting tasks out to smaller contractors. Suboptimization The optimization of a subelement of a system, perhaps to the detriment of the overall system. War Room A project office where the latest detail on project progress is available. It may also be a source of technical assistance in managing the project. Work Breakdown Structure A basic project document that describes all the work that must be done to complete the project and forms the basis for costing, scheduling, and work responsibility (see Chapter 6).
9/16/08 12:52:04 AM
224
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
QUESTIONS Material Review Questions
1. What is a program manager? How does this job differ from that of a project manager? 2. Identify the advantages and disadvantages of the matrix form of organization. 3. Name the four basic types of project organization and list at least one characteristic, advantage, and disadvantage of each. 4. Give some major guidelines for choosing an organizational form for a project. 5. Why is the project management office so important?
6. Identify three ways of dealing with a conflict associated with projects. Does dealing with conflict always need to be a zero-sum game? 7. What are some advantages and disadvantages of housing a project in a functional form? 8. What are the systems architect’s duties? 9. What are the major sources of conflict throughout the life cycle? 10. Describe risk management and how it applies to projects. 11. What are the major tasks of a Project Management Office?
Class Discussion Questions
12. Discuss some of the differences between managing professionals and managing other workers or team members. 13. Human and political factors loom large in the success of projects. Given the general lack of coverage of this subject in engineering and science education, how might a PM gain the ability to deal with these issues? 14. A disadvantage of the pure project organization has to do with the tendency of project professionals to fall behind in areas of technical expertise not used on the project. Name several ways that a project manager might avoid this problem. 15. Discuss the effects of the various organizational forms on coordination and interaction, both within the project team and between the team and the rest of the firm. 16. Describe, from Table 5-2, the probable reasons for the changing number of conflicts over the course of the project in the following areas: (a) Priorities (b) Administrative procedures (c) Technical trade-offs (d) Schedules
17. How would you organize a project to develop a complex new product such as a new color fax–copy machine? How would you organize if the product was simpler, such as a new disk drive? 18. Why is a risk management data bank for the project more necessary now than in the past? 19. What do you think may be the purpose of a work breakdown structure? How might it aid the PM in organizing the project? 20. Why do you think the average total conflict increases during the “early program phase” (Figure 5-7)? 21. What should be the role of the project manager in conflict management? 22. Is it ethical to employ participative management solely as a way to motivate employees? 23. What are the pros and cons of the head of a Project Management Office reporting to senior management? To departmental management? 24. Merck & Co., manufacturers of Vioxx, took a major financial hit when they decided to discontinue manufacture and sale of the drug. What do you think were the major items in their likely cost/benefit analysis?
Questions for Project Management in Practice
25. For one of the Project Management in Practice exercises in this chapter, identify the environments that may be a significant source of risk for the project. Reorganizing for Project Management at Prevost Car
26. Surely this was not the first time Prevost needed to make a significant change in their firm. Why do you think this was the first time the VP called upon a project management consulting firm? 27. Do you expect there was some concern among top management that no bulldozer was working the next day?
81721_Ch05.indd 224
28. This example well illustrates the trend to using project management to do everything in organizations that used to be done in other ways. Can everything be better executed using project management? If not, what are the characteristics of those tasks that cannot? South African Repair Success through Teamwork
29. Of the special ground rules, which ones do you think really gave impetus to the speed of the project? 30. What do you think was the primary factor that changed the culture for this project?
9/16/08 12:52:05 AM
INCIDENTS FOR DISCUSSION
31. Given that this project cut about 40 percent off the schedule and 25 percent off the cost, what is the message about the importance of teamwork? Risk Analysis vs. Budget/Schedule Requirements in Australia
32. If striving to meet schedule or budget isn’t top priority, what is? 33. What type of risk analysis approach would have been most appropriate in this situation? A Project Management Office Success for the Transportation Security Administration
34. What is surprising about the success of this non-profit agency?
225
35. Is the role of the PMO in this case unusual? The Empire Uses Floating Multidisciplinary Teams
36. Do you think this might be the future of project management? 37. Would this approach work for most of today’s projects? Trinatronic, Inc.
38. Consider the applicability of a “lightweight” team structure for this project. 39. Consider the applicability of a “heavyweight” or “balanced” structure.
INCIDENTS FOR DISCUSSION Shaw’s Strategy
Hydrobuck
Colin Shaw has been tapped to be an accounting project manager for the second time this year. Although he enjoys the challenges and opportunity for personal development afforded to him as a project manager, he dreads the interpersonal problems associated with the position. Sometimes he feels like a glorified baby-sitter handing out assignments, checking on progress, and making sure everyone is doing his or her fair share. Recently Colin read an article that recommended a very different approach for the project manager in supervising and controlling team members. Colin thought this was a useful idea and decided to try it on his next project. The project in question involved making a decision on whether to implement an activity-based costing (ABC) system throughout the organization. Colin had once been the manager in charge of implementing a process costing system in this same division, so he felt very comfortable about his ability to lead the team and resolve this question. He defined the objective of the project and detailed all the major tasks involved, as well as most of the subtasks. By the time the first meeting of the project team took place, Colin felt more secure about the control and direction of the project than he had at the beginning of any of his previous projects. He had specifically defined objectives and tasks for each team member and had assigned completion dates for each task. He had even made up individual “contracts” for each team member to sign as an indication of their commitment to completion of the assigned tasks per schedule dates. The meeting went very smoothly, with almost no comments from team members. Everyone picked up a copy of his or her “contract” and went off to work on the project. Colin was ecstatic about the success of this new approach.
Hydrobuck is a medium-sized producer of gasoline-powered outboard motors. In the past it has successfully manufactured and marketed motors in the 3- to 40-horsepower range. Executives at Hydrobuck are now interested in larger motors and would eventually like to produce motors in the 50- to 150-horsepower range. The internal workings of the large motors are quite similar to those of the smaller motors. However, large, highperformance outboard motors require power trim. Power trim is simply a hydraulic system that serves to tilt the outboard motor up or down on the boat transom. Hydrobuck cannot successfully market the larger outboard motors without designing a power trim system to complement the motor. The company is financially secure and is the leading producer of small outboard motors. Management has decided that the following objectives need to be met within the next two years:
Question: Do you think he will feel the same way six weeks from now? Compare this approach with his previous approach.
81721_Ch05.indd 225
1. Design a quality power trim system. 2. Design and build the equipment to produce such a system efficiently. 3. Develop the operations needed to install the system on the outboard motor. The technology, facilities, and marketing skills necessary to produce and sell the large motors already exist within the company. Questions: What alternative types of project organization would suit the development of the power trim system? Which would be best? Discuss your reasons for selecting this type of organization.
9/16/08 12:52:05 AM
226
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
CONTINUING INTEGRATIVE CLASS PROJECT The job of organizing the project for speedy, competent execution on budget is a major factor in the success of every project. We are not concerned here with where the project resides in the college and who it reports to—it reports to the Instructor—but rather the internal organization of the project. It can be handled as a set of tasks where everyone in the class has some given responsibilities and a specified time to deliver the results, or through a set of teams responsible for different sets of project tasks. If the class is small the former may be adequate, but for a larger class, it may be more efficient and practical to set up subteams (though probably NOT a third layer of sub-sub teams). For a class of say 35, five or six subteams may be optimal. This gives a uniform set of about five to seven direct reports for each
manager, including the PM. Of course, some subteams may need fewer workers and others more, but they should be close to the right size. Again, recall that one constraint on the organization is that the subteams cannot all be completely independent. There are two reasons for this. One is that doing some of the work across all the chapters will be more valuable to an individual student (e.g., answering all the Review Questions) than doing all the work for just one chapter and then being ignorant of all the other topics. The second is that in real projects there is typically considerable interaction, even conflict. If the project could be divided into a set of tasks that can all be done by different departments without interacting with each other, there is no need to set up a project to do the work!
BIBLIOGRAPHY Adams, J. R., and L. L. Adams. “The Virtual Project: Managing Tomorrow’s Team Today.” PM Network, January 1997. Baker, B. “In Common.” Project Management Journal, September 2007. Block, T. R. “The Seven Secrets of a Successful Project Office.” PM Network, April 1999. Block, T. R., and J. D. Frame. “Today’s Project Office: Gauging Attitudes,” PM Network, August 2001. Carlisle, A. S. “MacGregor,” Organizational Dynamics. New York: AMACOM, Summer 1976. Christensen, P. J., and Rydberg, J. “Overcoming Obstacles.” PM Network, November 2001. Cleland, D. I. Strategic Management of Teams. New York: Wiley, 1996. de Laat, P. B. “Matrix Management of Projects and Power Struggles: A Case Study of an R&D Laboratory.” IEEE Engineering Management Review, Winter 1995, reprinted from Human Relations, Vol. 47, No. 9, 1994. Dewhurst, H. D. “Project Teams: What Have We Learned?” PM Network, April 1998. Dinsmore, P. C. “Converging on Enterprise Project Management.” PM Network, October 1998. Ford, R. C., and F. S. McLaughlin. “Successful Project Teams: A Study of MIS Managers,” IEEE Transactions on Engineering Management, November 1992. Gratton, L. “Working Together . . . When Apart.” Wall Street Journal, June 16–17, 2007. Herzberg, F. H. “One More Time: How Do You Motivate Employees?” Harvard Business Review, January–February 1968.
81721_Ch05.indd 226
Hughes, T. P. Rescuing Prometheus. New York: Pantheon, 1998. IEEE Engineering Management Review, 1st Qtr. (33:1) 2005. Jiang, J. J., and G. Klein. “Software Project Risks and Development Focus.” Project Management Journal, March 2001. Kalu, T. Ch. U. “A Framework for the Management of Projects in Complex Organizations.” IEEE Transactions on Engineering Management, May 1993. Kotter, J. P. “Leading Change: Why Transformation Efforts Fail.” Harvard Business Review, March/April 1995. Reprinted in IEEE Engineering Management Review, Spring 1997. Lencioni, P. The Five Dysfunctions of a Team. San Francisco: Jossey-Bass, 2002. Levine, H. A. “Enterprise Project Management: What Do Users Need? What Can They Have?” PM Network, July 1998. Liu, L. and P. Yetton. “The Contingent Effects of Project Performance of Conducting Project Reviews and Deploying Project Management Offices.” IEEE Transactions on Engineering Management, November, 2007. Likert, R J., and G. Likert. New Ways of Managing Conflict. New York: McGraw-Hill, 1976. Nelson, B. “Energized Teams: Real World Examples.” PM Network, July 1998. Pinto, J. K. “Twelve Ways to Get the Least From Yourself and Your Project.” PM Network, May 1997. Project Management Institute. A Guide to the Project Management Body of Knowledge (PMBOK® Guide), 3rd ed. Newtown Square, PA: Project Management Institute, 2004.
9/16/08 12:52:05 AM
CASE
Raynal, W. “Teaming with Enthusiasm.” Auto-Week, May 4, 1992. Royer, P. S. “Risk Management: The Undiscovered Dimension of Project Management.” PM Network, September 2000. An extended version of this article appears in Project Management Journal, March 2000. Sheffi, Y. The Resilient Enterprise. Cambridge, MA: MIT Press, 2005. Stamatis, D. H. Failure Mode and Effect Analysis: FMEA from Theory to Execution, 2nd ed. ASQ Quality Press, 2003. Tennant, D. “PMO Failure: An Observation,” PM Network, October 2001.
227
Thamhain, H. J., and D. L. Wilemon. “Conflict Management in Project Life Cycles.” Sloan Management Review, Summer 1975. Tippet, D. D., and J. F. Peters. “Team Building and Project Management: How Are We Doing?” Project Management Journal, December 1995. Ward, S. “Requirements for an Effective Project Risk Management Process.” Project Management Journal, September 1999. Williams, G. “Implementing an Enterprise Project Management Solution.” PM Network, October 1997.
The following case describes an unusual organizational arrangement for an actual manufacturing firm. The company is largely run by the employees through teams. When projects are instituted, it is common to pass the idea through the relevant teams first, before any changes are made. However, not everything can be passed through all the teams that may be involved in the change, and this can be a source of trouble.
C
A
S
E
OILWELL CABLE COMPANY, INC. Jack R. Meredith As Norm St. Laurent, operations manager for Oilwell Cable Company, pulled his Bronco 4x4 onto Kansas’ Interstate 70, he heard on the CB about the traffic jam ahead of him due to icy road conditions. Although the traffic was moving some, Norm decided to get off at the eastern offramp for Lawrence, rather than the more direct western offramp, to save time. While waiting for the offramp to come up, Norm’s mind drifted back to his discussion with Bill Russell, the general manager, on the previous day. Norm had been contemplating adding microprocessors to their rubber mixing equipment in order to save manual adjustments on these machines. This would improve throughput and reduce costs simultaneously, though without displacing any employees. Based on the data Norm had seen, it appeared that the microprocessors could cut the production time by 1 percent and reduce scrap from the current rate of 1 percent down to one-half of 1 percent. However, it seemed that this might be an issue that should first be submitted to the production team in charge of rubber mixing for their thoughts on the idea. Once before, an even simpler change had been made without their knowledge and it wound up causing considerable trouble. As the traffic wound around two cars in the ditch by the highway, Norm reflected on how difficult it was to make changes at this plant with their team management process,
81721_Ch05.indd 227
though there were advantages too. It probably stemmed from the way the company was originally set up.
History of Oilwell Cable Company (OCC) Originally known as the Chord Cable Company and located in New Jersey, the firm had been experiencing severe management difficulties. When acquired by new management in 1983, they renamed it Oilwell Cable Company and relocated in Lawrence, Kansas to be closer to their primary customers in northeastern Oklahoma. Their product line consisted primarily of flat and round wire and cables for submersible pumps in oil wells. The manager chosen to head up the new enterprise, Gino Strappoli, gave considerable thought to the organization of the firm. Gino envisioned a company where everyone took some responsibility for their own management and the success of the business. Gino preferred this approach not only for personal reasons but because cable manufacturing is a continuous process rather than a job shop-type of activity. The dedicated allegiance of the relatively few employees in a process firm is crucial to staying competitive. In such industries, direct labor commonly constitutes only 5 percent of the cost of the product, with indirect labor being another 5 percent. By contrast, in a job shop the wages paid for labor are a major determinant to being cost-competitive, often running 30 percent of product cost, thus introducing a potential
9/16/08 12:52:06 AM
228
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
conflict between labor and management. Gino reasoned that if he could obtain the employees’ commitment to improving productivity, reducing scrap, being innovative with new technologies, and staying competitive in general, he would have a very viable firm. With the approval of the new owners, Gino initiated his plan. Of the original labor force, only a few moved to Kansas, including Gino and the firm’s controller, Bill Safford. All new equipment was purchased for the firm, and a local labor force was selectively recruited. As the firm was organized, the team management process was developed. Eleven teams were formed, six of which constituted the production area. The remainder included the management team; the resource team (support functions such as computing services, accounting, etc.); the technical team (including the lab employees, R & D, and so on); the administrative team (office and clerical); and the maintenance team. These teams basically set their own work schedules, vacation schedules, and job functions. They addressed common problems in their work area and interfaced with other teams when needed to solve problems or improve processes. With Gino’s enthusiastic encouragement, the team approach grew and took on more responsibility such as handling grievances and reprimanding team members when needed. In January 1985 the firm became profitable and later that year came fully on-stream. Gino soon thereafter left for another position, and the operations manager, Bill Russell, was selected to succeed him. At this point, Norm was brought in to replace Bill as operations manager. Norm had years of experience in manufacturing and was a degreed mechanical engineer. (See Exhibit 1 for the organization structure.) As Norm recalled, from 1985 to 1989 the firm rapidly increased productivity, improving profits significantly in the process and increasing in size to 140 employees. In so doing, they became the low-cost leader in the industry and gained a majority of the market share. This resulted in a virtual fourfold increase in sales since the days of Chord Cable Co. They were now approaching almost $25 million in annual sales. In 1989, however, the recession hit the oilwell industry. Added to this was the slowdown in energy consumption, effective conservation, and the oil glut. For almost a year the company bided time and idle employees were paid for
minimal production. Management felt a commitment to the employees to avoid a cutback, more so than in a normally organized firm. But finally, in 1990, top management told the teams that they would have to choose a method for handling this problem. Alternatives were shortened workweeks, layoffs, and other such measures. The teams chose layoffs. Next, management drew up a list of names of “recommended” layoff personnel representing a vertical slice through the organization—a top management employee, some professional and technical people, and a number of production employees. These lists were given to the teams who then decided what names to change and what names to keep. Management largely went along with the teams’ recommendations, and the layoffs (about 20) took place. With a slimmer work force, the division increased their productivity even more significantly (see Exhibit 2), allowing them to cut their product prices from between 10 and 20 percent. As the country climbed out of the stagnant economy in 1991, the division was excellently poised to capitalize on the increased economic activity, although oil itself was still largely in the doldrums. Increased demand in mid-1991 forced the division to use overtime, and then temporary help. They didn’t want to get back in the same workforce predicament they were in earlier.
The Team Management Process The 1990 layoff was a traumatic situation for the teams and the team process. Following that episode, the employees were unsure whether the team management process might require too much responsibility on their part. They had faced reprimanding employees in the past, and had even asked one employee to leave who tried to deceive them. In general, they were very receptive to employees’ individual problems and had helped their colleagues through tough times on many occasions, but now they were unsure. Team size varied from a low of 3 to a high of 17. The advantages of the team process to the firm seemed significant, in the minds of the team members and area managers. One member of the maintenance team noted that the team process gave much more responsibility to the employee and allowed the firm to obtain the maximum talent from each person.
General manager Bill Russell
Controller Bill Safford
Accounting
Exhibit 1
81721_Ch05.indd 228
Operations manager Norm St. Laurent
Purchasing Production Maintenance
Human resource manager Sheree Demming
Human resources
R&D manager Burt MacKenzie
Lab
Quality assurance
Organization Chart: Oilwell Cable Division
9/16/08 12:52:06 AM
CASE
229
400
Productivity index
300
200
100
1986
1987
1988
1989
1990
Year
The firm, in response, spends $1,000 per person per year on upgrading the skills of the employees in such areas as team effectiveness training, technical skill acquisition, communication skills, and general skill building. Bill Russell sees the major benefit of the team process as its production flexibility. Employees are also very receptive to change. Since the 1990 layoffs, the employees have become much more sensitive to outside threats to their jobs. This spurred quality and productivity gains of over 30 percent in 1991. The primary benefit of the team process to the employees is having a say in their own work schedule. A typical secondary benefit was the elimination of penalties for making an error. The employees feel that this is an excellent place to work; absenteeism is only 0.7 percent, and only two people have left voluntarily since 1988. Overall, the employees seemed to feel that this process worked well but wasn’t utopian. “It doesn’t give away the store,” one employee commented. Two disadvantages of the process, according to the employees, were the time and energy it required on their part to make decisions. As an example, they noted that it required three full days for the teams to come up with the revised layoff lists. Normally the teams met once a week for an hour and a half. But when the teams made a decision, the implementation of the decision was virtually immediate, which was a big advantage over most management decisions. Although this process required more time on the part of the employees, the total amount of time from idea to full implementation was probably less than that in a traditional organization, and it was clearly more successful. When asked if he would ever be willing to work in a regular work environment again, one team member voiced the opinion that this process while very good, really wasn’t that much different from a well-run, open, traditional organization. Teams realized that not every decision was put through them. They felt that this was appropriate, however. They also recognized the difficulty facing management when trying to
81721_Ch05.indd 229
1991
Exhibit 2
Productivity History
decide whether something should come through the teams or if it was unnecessary to consult them. Though the teams met on company time, they were not eager to spend more time on team meetings. Especially after the layoff crisis, the teams realized that self-management was a two-way street and frequently hoped that upper management would make the tough decisions for them. In summary, the teams felt that the process was based on trust, in both directions, and was working pretty well.
The Cable Production Process As Norm pulled his truck into the OCC parking lot, he noticed that there were quite a few empty spaces. This 1992 winter had been more severe than most people had expected, based on the November and December weather. The snow was almost over Norm’s boots as he slogged his way to the buildings. Upstairs in his small, jumbled office, Norm pulled out the microprocessor file from his desk drawer and sat down to review the production process. Their primary raw materials, which made up about 60 percent of the products’ cost, included copper rods, lead, polypropylene, nylon, and rubber. Inspection consisted of submerging the cable in water and charging it with 30,000 volts. To date, none of their products had ever been returned. However, just in case they were ever queried about a cable they had produced, they kept samples of all their cables for five years back. The firm considered itself very vulnerable to new technology, and hence kept an active R & D lab in continuous operation. Simple advances in process technology or insulation and jacketing materials could wipe out their market overnight, so they didn’t want to be caught napping. Other methods of oil extraction were also a constant threat. Since they competed in a world market, they were highly exposed to foreign competition, and the location of their competitors was often a major factor in sales.
9/16/08 12:52:07 AM
230
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
QUESTIONS 1. If Norm chooses to go ahead with the microprocessor conversion on the machinery without passing it by the team, what are the potential conflicts that might arise? What are the advantages of such a move? 2. If Norm decides to put the decision to the appropriate production team, what are the potential problems? What would be the advantages? 3. If the production team chooses to approve and implement this microprocessor conversion project, what form of project organization will this represent? 4. Given the size of this organization and the number of projects they deal with, would it make sense to institute
a Project Management Office? Is there another arrangement that might be a good alternative? 5. How much impact might microprocessors have on production costs? Assume that variable overhead represents the same percentage of costs as fixed overhead. Find the net present value if the microprocessors cost $25,000 and their installation runs another $5,000. Assume a 10% margin. 6. Compare Norm’s recollection of the division’s productivity gains between 1985 and 1989 to Exhibit 2. Explain the inconsistency. 7. What would you recommend that Norm do?
The following reading discusses a new phenomenon in the increasingly global competitive environment—geographically dispersed project teams. The competitiveness of global firms is often facilitated by new electronic technologies, and these technologies are also useful to the success of globally dispersed project teams, as described in the article. However, other aspects of such dispersed teams are more problematic, and the article illustrates these, as well as approaches used by project managers for circumventing them. Finally, some of the advice given in the article should be useful as well for project teams that aren’t geographically dispersed.
D I R E C T E D
R E A D I N G
THE VIRTUAL PROJECT: MANAGING TOMORROW’S TEAM TODAY* J. R. Adams and L. L. Adams
Extraordinary demands are placed on project personnel— demands that require extraordinary commitments in order to accomplish the task at hand. Generating this commitment through the process of team building is a primary responsibility of any project manager. The processes of team building have been studied extensively by both academics and practitioners for decades, but until recently nearly all of these studies were conducted within the bureaucratic setting: that is, the team members shared a common workplace, saw each other frequently, knew each other well, and expected to continue working together for an extended period of time. The team building concepts developed within such an environment naturally reflect these working conditions as either stated or implied assumptions, and the concepts derived from
*Reprinted from PM Network, Project Management Institute, Inc., January 1997, Vol. 11, Number 1. © 1997, Project Management Institute Inc. All rights reserved.
81721_Ch05.indd 230
these studies can be assumed to hold only as long as these assumptions hold. These concepts still hold for projects intended to support and improve bureaucratic organizations. In the vast majority of cases, however, the working conditions experienced by modern projects differ greatly from those surrounding traditional bureaucratic work. Nevertheless, the basic definitions of team building continue to emphasize the assumption of typical bureaucratic working conditions. For example, one leading textbook in the field (Kast and Rosenzweig’s Organization and Management: A Systems and Contingency Approach, McGraw-Hill, 1985) states that “actual teamwork involves small groups of three to fifteen people that meet face-to-face to carry out their assignments.” Even in PMI’s current PMBOKGuide (pp. 99–100), one of the five basic “tools and techniques” of team development is called “collocation,” which involves “. . . placing all, or almost all, of the most active project team members in the same physical location to enhance
9/16/08 12:52:07 AM
DIRECTED READING
their ability to perform as a team.” In both of these publications, the concept of the virtual project is clearly ignored. In the new, “virtual project” environment, team members seldom share a common workplace, may rarely see each other, may never have worked together before, and may never work together again after the project is complete. For an ever-increasing number of organizations, the world is represented by an environment of rapid technological advancement, particularly in the area of communications; complex organizational structures needed to deal with tough global competition; and dynamic markets that demand short production runs of unique products. Downsizing, outsourcing, and employee empowerment have become facts of life in the climate of many organizations, while job security is rapidly becoming a thing of the past. The survival of many organizations depends on the ability of the organization to rapidly change its structure, culture and products to match the changing demands of the environment. Let’s explore the conditions faced by the modern project manager in developing an effective and productive project team within a “virtual project.” The Virtual Project The virtual project, also known as a “distributed team,” is one in which the participants are geographically distributed to an extent that they may seldom, if ever, meet face-to-face as a team. The geographical distances involved do not have to be great; individuals who work in the same industrial complex may be functioning in a virtual project if their schedules do not allow them to meet face-to-face. As distances increase, however, the difficulties of communicating and building teams increase significantly. When team members are spread across several time zones, opportunity for direct communication is severely limited, and the associated costs of both face-toface and electronic communications increase dramatically. Electronic communication takes on much more importance in virtual projects because electronic systems must assume the burden of making the development of effective project teams possible. It is beyond the scope of this article to discuss at length the issues that are generating the need for virtual projects. Suffice it to say that the environmental conditions described above are precisely those that require project teams to be dispersed. Jaclyn Kostner has written extensively on the virtual project. In Knights of the TeleRound Table (Warner Books, 1994), she documents the unique issues faced by project managers who must manage such a virtual or distributed project. The issues she defines are shown in the left-hand column of the accompanying sidebar. Developing trust is the greatest challenge to the remote project manager. It’s difficult for distant team members to get to know each other well; consequently, they tend to communicate poorly because they often are less than comfortable
81721_Ch05.indd 231
231
with each other. Both of these situations destroy the trust that is so essential to creating good teamwork. Developing a group identity across distances is also difficult because people normally associate with events that occur at their local level. Teams tend to have a problem sharing information effectively across distances. One reason for this may be the lack of informal opportunities for discussion at lunches or during coffee breaks. Developing clear structures is an issue for the virtual project manager because distant work groups need more than the traditional vision, mission, and goals that are important for all project groups. Members of virtual teams tend to develop relationships with those who are located with them rather than with those who are at distant sites. The formation of such “cliques” can create competition or antagonism between the project manager and/or team members located elsewhere. Lastly, each distributed team member tends to have information that is somewhat different from that held by others. More important, each team member views information from a different perspective. Such inequities of information frequently increase the opportunity for miscommunication among team members. If issues such as these are not dealt with, the virtual project experiences management difficulties far in excess of the more “typical” project with higher levels of collocation. Fortunately, the technology that has made virtual projects both possible and necessary also provides opportunities for dealing progressively with these problems. Implementing Virtual Project Teams The sidebar includes suggestions created by virtual project managers for using the advantages of project management team building to overcome virtual team difficulties. Generally, these suggestions encourage project managers to make creative use of modern communication technologies to bring the team together and encourage the participation and sense of ownership that generates commitment to the project and team objectives. Since it’s seldom possible in the virtual project to meet face-to-face, experienced project managers recommend using a variety of electronic communications. Trust seems to develop as the individual team member learns more about the project manager, other team members, and the project. It’s therefore essential that team members be encouraged to communicate with each other frequently, as well as with the project manager and the team as a whole. Virtual project managers use all forms of electronic communication— cellular phones, pagers, faxes, e-mail, Web pages, and computer-to-computer transmissions across local area and wide area networks—to distribute everything from key reports to jokes, logos, and mottoes. These communications are specifically intended to increase the common experiences shared by the team members and thus increase the bonds among them. Regularly scheduled video and telephone conference calls increase team members’ exposure to project information, as well as to each other.
9/16/08 12:52:07 AM
232
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
Virtual Project Management Suggestions Issues
Problems
Suggestions
Developing Trust
Irregular, inconsistent communication; lower level of comfort and familiarity among team members; “us vs. them” attitude.
Provide and use a variety of communication alternatives. Communicate electronically except when signatures are required. Make project management software available to all team members.
Developing Group Identity
Fewer shared experiences; lack of cohesion; little understanding of other members’ roles and responsibilities.
Conduct regular teleconference meetings when the need warrants. Manage the agenda to include a variety of participants and ensure everyone is involved in the discussion. Use logos, mottoes, and creative humor. Stay in contact when meetings are not required. Note: Do not exclude anyone from group discussions.
Sharing Information
Difficulty sharing adequate levels of information across distances; lack of formal opportunities to discuss work-related issues; lack of a common system to transmit information across distances.
Use technology to develop additional information-sharing opportunities: cellular phones, pagers, faxes, telephones, e-mail, Internet, and computer-tocomputer. Distribute all key reports to all team members. Put information at one central access point, e.g., a project Web page, a LAN account.
Developing Clear Structures
Use standard formats for meetings. Define Uncertain roles and responsibilities goals, objectives, problems, and conof team members; clashing culcerns at the kickoff meeting, and reitertures create different expectations, ate them frequently. Have participants few clearly defined processes for describe and define potential problems decision making. and concerns, and evaluate risks as a group.
Formation of “Cliques” or Informal Subgroups
The project manager can’t prevent them Cliques tend to create antagonism from forming, but can manage these and competition between the team subgroups. Identify and keep track of and the project manager, between them. Create subcommittees for dealteam members, or among the ing with problems, drawing members cliques themselves. from the different cliques. Look for opportunities to mix participants from the different cliques, and initiate or create these opportunities when necessary.
Understanding Information
Ask members to explain their viewpoints. Each team member has different Ask members to describe the actions information (inconsistent); each they plan to take, and solicit possible member has varying levels of impacts to other involved parties. information (incomplete); each Use different levels of information member has a different perspecfor different participants, as tive of the information. All = ineqappropriate. uities of information.
81721_Ch05.indd 232
9/16/08 12:52:08 AM
DIRECTED READING
When cliques form as subgroups of the project team, these subgroups are managed, not ignored. Subcommittees are created to resolve project problems, specifically drawing members from different cliques together so that they learn more about each other. Team members are frequently asked to explain their viewpoints and to discuss their plans with the team at large to improve the common understanding of information about the project, its progress, and its prospects. Four specific types of electronic communication, which didn’t even exist just a few years ago, are being used extensively by managers of virtual projects to help overcome the lack of formal and informal personal contact among the team members. The Internet. As technology creates conditions that demand faster reactions, team building over extensive distances, and ever-more-extensive communications, that same technology provides new approaches with which to deal with these issues. The Internet provides a means for communicating quickly and inexpensively throughout the world. It is essential for all participants in virtual project teams to have access to the Internet and e-mail. The virtual project manager relies on e-mail to exchange project data with the dispersed team, especially when team members or clients are internationally located. E-mail is a particularly good tool for exchanging the detailed information necessary to update the status of project activities. This task is difficult to accomplish verbally via telephone or videoconference because of the detail involved and the difference in time zones. Transmitting such data by facsimile can be expensive due to the volume of data involved, the frequency of needed updates, and the requirement for consistent information flows. With e-mail as the primary mode of communication, information flows easier and faster, and the difference in time zones is less likely to be a critical failure factor. The ease of communication encourages the team to communicate more often and in more detail. Team members get to know each other more personally, and therefore develop more cohesive working relationships. One word of caution, however; many companies, in a misguided attempt to economize, are limiting the use of e-mail to “official” business, and eliminating personal comments, jokes, and other “non-essential” communications. It is precisely these “informal” transmissions that can at least partially make up for the lack of personal contact. Informal e-mail communications can replace some face-to-face contact and help generate the close working relationships, commitments, and friendships that are traditionally considered to be characteristic of successful project teams. The Pager. A byproduct of today’s business environment is that technical specialists (team members) frequently are working on multiple projects, and are considered highly valuable resources. The time of these “highly valuable
81721_Ch05.indd 233
233
resources” may be quite limited. Though regularly scheduled project meetings are critical throughout the project life cycle, these valuable resources may often be required elsewhere, and the project manager may need to help conserve their time. One way to make the best use of a team member’s time is to use a paging system. Each team member carries a pager, and the pager numbers are published with the team roster. When agenda topics don’t directly relate to a particular team member or function, that person can be released from attendance, freeing up time that can then be used more productively. If an issue surfaces that requires that person’s attention, he or she can be “paged” into the teleconference call. This allows for quick responses to problems and issues, and limits the number of “open action items” on meeting minutes. This procedure must be established at the project’s kickoff meeting, when the project manager discusses team roles, responsibilities, and expectations. A culture must be developed within the project where each team member is expected to respond quickly to paging, especially when a 911 code, meaning an emergency needing immediate response, is attached to the pager number. Teleconferencing. Teleconferencing is not as new as some of the techniques noted above, but its use has expanded dramatically in recent years along with the increase of virtual projects. Everyone thinks they understand teleconferencing, but few are able to use it effectively. The lack of visual communication means that only the spoken word is available for the transfer of information, so individual speakers must identify themselves when contributing to the discussion. The medium was originally designed to provide communications between two people. When more people are added to the conference, managing the conversation flow rapidly becomes a complex issue. The goal is to assure that everyone has an opportunity to contribute and that all issues are dealt with in a reasonable period of time. Using telephony technology for communicating among several people requires careful management and control of the communication process. The project manager cannot manage the results of the communications, but must manage the process of getting to those results. The conference needs to be well-organized and structured. A detailed agenda is essential to a productive conference call. The project manager should schedule the call in advance so that an agenda can be published and distributed at least two to three days prior to the meeting. The agenda should always include specific items of information: purpose of the teleconference, day-date-time of the call, call-in number, expected duration of the call, chair of the meeting (the project manager), a detailed listing of items to be discussed, and the key participants for each item noted. The project manager can then facilitate discussion among these key players, solicit input from other team members,
9/16/08 12:52:08 AM
234
CHAPTER 5 / THE PROJECT IN THE ORGANIZATIONAL STRUCTURE
and maintain a solution-oriented attitude. This structure allows all essential persons to share in the conversation and present their viewpoints, while keeping the team focused on the critical issues at hand. The structure also prevents side conversations and keeps the team from straying from the intended topic until a solution has been achieved. The checklist in the accompanying sidebar is useful for developing a successful teleconference.
Teleconferencing Tips
•
•
•
•
•
•
81721_Ch05.indd 234
Include an overall time limit for scheduling purposes (for yourself and for your team). Anything over 1.5 hours tends to become unproductive because of the high level of concentration required to communicate in an audio-only format. Organize the meeting in two sequential categories. In Category 1 are those activities that on the project plan should be completed by the time the meeting occurs. In Category 2 are those activities that need to be completed prior to the next meeting. Have one major agenda topic called “deliverables,” where the deliverables that are due or past-due are listed, along with who is responsible for completing those items. The items can be statused and assistance can be solicited from the team to expedite completion. Always have an “open discussion” section at the end of the agenda. Do a round-table roll call of each person to see if anyone has comments or concerns that need to be discussed or documented in the minutes. Putting the open discussion section last also keeps the focus on issues that are critical to the project, rather than on issues that may be critical to an individual. If time runs out, at least the necessities have been covered. Invite team members to call in or e-mail additional agenda topics, and then add these topics to the agenda for discussion. If people can’t submit topics prior to agenda distribution, introduce new items only during the open discussion section so that the flow of the meeting is not disrupted. Talk about any major changes to the schedule, such as slippages or early completions that affect the schedule or multiple departments, at the beginning of the conference. These changes could drastically affect the items on the agenda, the flow of the conference call, or even the flow of work for your whole project.
Videoconferencing. With a geographically dispersed team, the cost of travel, including the cost of team members’ time during travel, is too high to justify having the team involved in periodic face-to-face status meetings. However, current issues may be too critical to rely on e-mail, teleconferencing, and one-on-one voice contact. This is a time when videoconferencing is the most appropriate form of communication. A capability not present in other forms of electronic communication, videoconferencing allows participants to feel more involved with each other because they can communicate on many different levels. Body language and facial expressions can be observed and interpreted, in many cases transferring more meaning than the actual words. Full team participation in developing the initial work breakdown structure and the project plan, both of which occur in the kickoff meeting, is crucial to developing the commitment to the virtual project team. It is particularly appropriate to have the kickoff meeting in a site that is videoconferenceaccessible, if possible, so that if some people can’t attend then they can still be involved. Despite all its good points, there is a downside to videoconferencing. Some of the common problems and barriers are logistical. For example, all participants must be located at pre-arranged receiving/transmitting sites; and, although the cost has been decreasing slowly, videoconferencing is still quite expensive, especially when numerous sites and satellite-based communications are involved, so these sites may not be readily accessible. Also, even though technology is gradually moving forward and the signal transmission speed is increasing, videoconferencing uses a wide bandwidth, which translates into a significant delay in viewing the movements and expressions of participants. This delay as well as an individual’s tendency to be uncomfortable in front of a camera frequently combine to make the whole process somewhat stiff and stilted. This seems to be a particular problem in systems where the participants can see themselves and worry about how they look to the others. Since the purpose of this extraordinary use of electronic communications is to increase the stability of the virtual project, it is particularly important that all team members be able to work with the detailed project plan. All team members should have access to whatever software is being used to plan and control project activities. They should also have easy access to the project files. The liberal distribution of project documentation provides enhanced communication as well as an exposure to the project cultural structure. A basic knowledge of team building is essential to the effective management of any project. With the advent of the virtual project, however, the methods and techniques necessary for implementing the project team building process have changed. Face-to-face communications are obviously desirable, but they may no longer be possible because of
9/16/08 12:52:08 AM
DIRECTED READING
time or cost constraints. Fortunately, the same technologies that have made the virtual project a possibility also provide the methods for developing effective teams of dispersed project participants. Virtual project managers must be both knowledgeable and creative in using the modern communication technologies available to them for the purpose of enhancing the common experiences of their project team members, and hence the commitment that can be generated for the project’s objectives and goals. Perhaps more important, however, is to recognize that the ability to effectively use all of the current electronic communication techniques available to the project manager is rapidly becoming a mandatory skill for anyone likely to be involved in virtual projects. This topic deserves some extensive research in order to help the virtual project manager develop more effective methods and techniques for dealing with the task of
81721_Ch05.indd 235
235
building effective project teams from dispersed project participants. Questions 1. Which virtual project problems are unique to the phenomenon of being dispersed and which are common project problems in any project? 2. What new electronic technologies have contributed to the problems, and solutions, of virtual project teams? 3. Of the solutions to virtual team problems, which would apply to regular project teams also? 4. Which problems described in the article are the most serious for virtual projects? Which might be fatal? 5. How might the difficulties of matrix organization change when implementing virtual projects?
9/16/08 12:52:09 AM
P
A
R
T
II PROJECT PLANNING
In Part II we discuss project planning in terms of planning the activities, budget, and schedule for the project. Chapter 6 deals with project activity planning and presents tools useful in organizing and staffing the various project tasks. It also contains a short discussion of phase-gate management systems and other ways of dealing with the problems that arise when multidisciplinary teams work on complex projects. Budgeting, the planning and control of costs, is addressed next in Chapter 7. Scheduling, a crucial aspect of project planning, is then described in
81721_Ch06.indd 237
Chapter 8, along with the most common scheduling models such as the Program Evaluation and Review Technique (PERT), the Critical Path Method (CPM), and precedence diagramming. Concluding Part II, resource allocation is covered in Chapter 9. For single projects, we discuss how the resource allocation problem concerns resource leveling to minimize the cost of the resources. But for multiple projects, we learn that the issue is how to allocate limited resources among several projects in order to achieve the objectives of each.
9/16/08 1:09:29 AM
ftoc.indd 16
10/10/08 5:17:22 PM
ftoc.indd 16
10/10/08 5:17:22 PM
C
H
A
P
T
E
R
6 Project Activity Planning
PMBOK Guide
This chapter initiates our discussions of Time and Quality Management, PMBOK knowledge areas 3 and 5, respectively. Time management is an extensive topic which is further discussed in Chapters 8, 10, and 11. Quality management will also be discussed further in Chapter 12. In the Reader’s Digest (March 1998, p. 49) Peter Drucker is quoted on planning: “Plans are only good intentions unless they immediately degenerate into hard work.” To make such a transformation possible is no easy task. Inadequate planning is a cliché in project management. Occasionally, articles appear in project management periodicals attesting to the value of good planning. Project managers pay little attention. PMs say, or are told, that planning “takes too much time,” “customers don’t know what they want,” “if we commit we will be held accountable,” and a number of similar weak excuses (Bigelow, 1998, p. 15). Tom Peters, well-known seeker of business excellence, was quoted in the Cincinnati Post: “Businesses [believe] a lot of dumb things. . . . The more time you spend planning, the less time you’ll need to spend on implementation. Almost never the case! Ready. Fire. Aim. That’s the approach taken by businesses I most respect.” We strongly disagree and, as we will report below (and in Chapter 13), there is a great deal of research supporting the view that careful planning is solidly associated with project success—and none, to our knowledge, supporting the opposite position. On the other hand, sensible planners do not kill the plan with overanalysis. This leads to a well-known “paralysis by analysis.” In an excellent article, Langley (1995) finds a path inbetween the two extremes. Thus far, we have dealt with initiating a project. Now we are ready to begin the process of planning the work of the project in such a way that it may be translated into “hard work” that actually leads to a successful completion of the project. There are several reasons why we must use considerable care when planning projects. The primary purpose of planning, of course, is to establish a set of directions in sufficient detail to tell the project team exactly what must be done, when it must be done, what resources will be required to produce the deliverables of the project successfully, and when each resource will be needed. As we noted in Chapter 1, the deliverables (or scope, or specifications, or objectives) of a project are more than mere descriptions of the goods and/or services we promise to deliver to the client at a quality level that will meet client expectations. The scope of a project also includes the time and cost required to complete the project to the client’s satisfaction.
239
81721_Ch06.indd 239
9/16/08 1:09:29 AM
240
CHAPTER 6 / PROJECT ACTIVITY PLANNING
The plan must be designed in such a way that the project outcome also meets the objectives of the parent organization, as reflected by the project portfolio or other strategic selection process used to approve the project. Because the plan is only an estimate of what and when things must be done to achieve the scope or objectives of the project, it is always carried out in an environment of uncertainty. Therefore, the plan must include allowances for risk and features that allow it to be adaptive, i.e., to be responsive to things that might disrupt it while it is being carried out. One such disruption—“scope creep,” or the tendency of project objectives to be changed by the client, senior management, or individual project workers with little or no discussion with the other parties actively engaged in the work of the project—is particularly common in software projects. A formal process to change the project scope will be discussed further in Chapter 11. In addition, the plan must also contain methods to ensure its integrity, which is to say it must include means of controlling the work it prescribes. Finally, and quite apart from the specification on output required by the project itself, the plan must include any constraints on activities and input materials proscribed by law and society. Among the many sources of outside constraints are the Food and Drug Administration, the Occupational Health and Safety Administration, various engineering societies, the PMI, Labor Unions, and the “Standards Practices” of many different industries. Such constraints
Project Management in Practice Beagle 2 Mars Probe a Planning Failure
As the Beagle 2 Mars probe designed jointly by the European Space Agency and British National Space Center headed to Mars in December of 2003, contact was lost and it was never heard from again. In retrospect, it appears that inadequate project planning (and
81721_Ch06.indd 240
replanning) was to blame. Excessive pressure on time, cost, and weight compromised the mission right from the start. With insufficient public funding, the design team had to spend much of their time raising private funds instead of addressing difficult technical issues.
9/16/08 1:09:30 AM
PROJECT ACTIVITY PLANNING
In addition, late changes forced the team to reduce the Beagle’s weight from 238 pounds to 132 pounds! And when the three airbags failed to work properly in testing, a parachute design was substituted but inadequately tested due to lack of time. A review commission recommended that in the future:
• •
Requisite financing be available at the outset of a project Formal project reviews be conducted on a regular basis
• • •
241
Milestones should be established where all stakeholders reconsider the project Expectations of potential failure should be included in the funding consideration Robust safety margins should be included and funded for uncertainties
Source: Project Management Institute. “Mars or Bust,” PM Network, October 2004, p. 1.
are meant to protect us all from unsafe or harmful structures, machines, rugs, equipment, services, and practices. There is an extensive literature on project planning. Some of it is concerned with the strategic aspects of planning, being focused on the choice of projects that are consistent with the organization’s goals. Another group of works is aimed at the process of planning individual projects, given that they have been chosen as strategically acceptable. Most fields have their own accepted set of project planning processes. Except for the names given to the individual processes, however, they are all similar, as we shall soon see. For example, in the field of Information Systems they refer to the standard “systems development cycle” for software projects, consisting of four or six or seven “phases,” depending on which author is being consulted (e.g., see Rakos, 1990 or Boehm, 1988). The purpose of planning is to facilitate later accomplishment. The world is full of plans that never become deeds. The planning techniques covered here are intended to smooth the path from idea to accomplishment. It is a complicated process to manage a project, and plans act as a map of this process. The map must have sufficient detail to determine what must be done next but be simple enough that workers are not lost in a welter of minutiae. In the pages that follow we discuss a somewhat formal method for the development of a project plan. Almost all project planning techniques differ only in the ways they approach the process of planning. Most organizations, irrespective of the industry, use essentially the same processes for planning and managing projects, but they often call these processes by different names. What some call “setting objectives,” others call “defining the scope” of the project, or “identifying requirements.” What some call “evaluation,” others call “test and validation.” No matter whether the project is carried out for an inside or outside client, the project’s “deliverables” must be “integrated” into the client’s operating “system.” We have adopted an approach that we think makes the planning process straightforward and fairly systematic, but it is never as systematic and straightforward as planning theorists would like. At its best, planning is tortuous. It is an iterative process yielding better plans from not-so-good plans, and the iterative process of improvement seems to take place in fits and starts. The process may be described formally, but it does not occur formally. Bits and pieces of plans are developed by individuals, by informal group meetings, or by formalized planning teams (Paley, 1993), and then improved by other individuals, groups, or teams, and improved again, and again. Both the plans themselves and the process of planning should start simple and then become more complex. If the appropriate end product is kept firmly in mind, this untidy process yields a project plan. In this chapter we focus on designing the physical aspects of the project, defining what the project is supposed to accomplish, and who will have to do what for the project’s desired output to be achieved. Here we describe the
81721_Ch06.indd 241
9/16/08 1:09:31 AM
242
CHAPTER 6 / PROJECT ACTIVITY PLANNING
actual process of project planning. Organizing the work of the project, acquiring a project manager, and forming a project team are parts of project initiation. The project’s budget and schedule are major parts of the project plan, but we delay discussion of them until Chapters 7 and 8. Indeed, what must be done to test and approve project outputs at both interim and final stages, and what records must be kept are both parts of the project plan and these are covered in later chapters, as is the part of the plan that covers ending the project. There is nothing sacrosanct about this sequence. It is simply in the order that these parts of the project plan tend to develop naturally. Project activity plans may take many forms and in the coming pages we will mention several of these. A project plan should include the elements described in the next section. As we will see later, it should also include a record of all changes and adjustments that were made to the project during its life because it can then serve as the primary document of project termination, the project history (see Chapter 13). The project plan will include a complete set of schedules together with the associated resources and personnel needed to perform all of the tasks required to complete the project. For many purposes, we sometimes use an action plan, a portion of the project plan detailing the activities, their schedules, and resources, including personnel. Like a project plan, an action plan can take many forms and we illustrate a few of these somewhat later. The focus of an action plan, however, is on the schedule/resource/personnel elements of the activities and/or events required by the project. In the case of both the project plan and the action plan, we may use a partial version or enhanced version of either at any time, depending on the need. In Section 6.4, we describe the project work breakdown structure (WBS) that is another (usually hierarchical) way of viewing the activities in the action plan. Often, the WBS consists of a simple list of all project activities with major activities broken down into subactivities, and these broken down still further. Schedules may also be shown, and resources, budget account numbers, and other specific aspects of the project may be displayed. The project linear responsibility chart (or table) is another specialized view of the action plan and focuses on who has what responsibility (e.g., performing, approving, communicating, supporting) associated with each project task. Many different forms may be used for both the WBS and responsibility charts. It is appropriate to ask, “Why so many different ways of showing similar types of information?” As is true of so many things, tradition is probably the major reason. The project plan is usually a large and complex document. PMs need fast and simple ways of communicating specific kinds of information about their projects. Action plans, WBSs, and responsibility charts are simple and highly flexible ways of doing this.
6.1
INITIAL PROJECT COORDINATION AND THE PROJECT PLAN It is crucial that the project’s objectives be clearly tied to the overall mission, goals, and strategy of the organization, such as might be reflected in the project portfolio process. Senior management should delineate the firm’s intent in undertaking the project, outline the scope of the project, and describe how the project’s desired results reinforce the organization’s goals. Without a clear beginning, project planning (and later progress) can easily go astray. It is also vital that a senior manager call and be present at the project launch meeting, an initial coordinating meeting, as a visible symbol of top management’s commitment to the project. The individual leading the launch meeting is first to define the scope of the project. The success of the project launch meeting is absolutely dependent on the existence of a welldefined set of objectives. Unless all parties to the planning process have a clear understanding
81721_Ch06.indd 242
9/16/08 1:09:31 AM
6.1
PMBOK Guide
81721_Ch06.indd 243
INITIAL PROJECT COORDINATION AND THE PROJECT PLAN
243
of precisely what it is the project is expected to deliver, planning is sure to be inadequate or misguided. The precise nature of the scope statement depends on the nature of the project itself, and because of this, it reflects the fact that all projects are, to some extent, unique. For some useful comments on the scope statement, see Duncan (1994). We have more to say about project scope and its management in Chapters 4 and 11. At the launch meeting, the project is discussed in sufficient detail that potential contributors develop a general understanding of what is needed. If the project is one of many similar projects, the meeting will be short and routine, a sort of “touching base” with other interested units. If the project is unique in most of its aspects, extensive discussion may be required. It is useful to review the major risks facing the project during the launch meeting. The known risks will be those identified during the project selection process. These are apt to focus largely on the market reaction to a new process/product, the technical feasibility of an innovation, and like matters. The risk management plan for the project must be started at the launch meeting so that further risk identification can be extended to include the technology of the process/product, the project’s schedule, resource base, and a myriad of other risks facing the project but not really identifiable until the project plan has begun to take form. In addition to the matters discussed below, one of the outcomes of the project planning process will be the formulation of the project’s risk management group and the initial risk management plan that the group develops during the process of planning the project. While various authors have somewhat different expectations for the project launch meeting (e.g., see Knutson, 1995; Martin et al., 1998), we feel it is important not to allow plans, schedules, and budgets to go beyond the most aggregated level (Level 1), possibly Level 2 (see Section 6.3 for a description of planning levels) if the project deliverables are fairly simple and do not require much interdepartmental coordination. To fix plans in more detail at this initial meeting tends to prevent team members from integrating the new project into their ongoing activities and from developing creative ways of coordinating activities that involve two or more organizational units. Worse still, departmental representatives will be asked to make “a ballpark estimate of the budget and time required” to carry out this first-blush plan. Everyone who has ever worked on a project is aware of the extraordinary propensity of preliminary estimates to metamorphose instantaneously into firm budgets and schedules. Remember that this is only one of a series of meetings that will be required to plan projects of more than minimal complexity. It is critical to the future success of the project to take the time required to do a technically and politically careful job of planning. “If this means many meetings and extensive use of participatory decision making, then it is well worth the effort” (Ford et al., 1992, p. 316). Whatever the process, the outcome must be that: (1) technical scope is established (though perhaps not “cast in concrete”); (2) basic areas of performance responsibility are accepted by the participants; (3) any tentative delivery dates or budgets set by the parent organization are clearly noted; and (4) a risk management group is created. Each individual/unit accepting responsibility for a portion of the project should agree to deliver, by the next project meeting, a preliminary but detailed plan about how that responsibility will be accomplished. Such plans should contain descriptions of the required tasks, and estimates of the budgets (labor and resources) and schedules. Simultaneous with these planning activities, the risk management group develops a risk management plan that includes proposed methodologies for managing risk, the group’s budget, schedule, criteria for dealing with risk, and required reports. Further, necessary inputs to the risk data base are described and various roles and responsibilities for group members are spelled out, as noted in PMBOK (Project Management Institute, 2004). It must be emphasized that the process of managing risk is not a static process. Rather, it is ongoing, with constant updating as more risks are identified, as some risks vanish, as
9/16/08 1:09:31 AM
244
CHAPTER 6 / PROJECT ACTIVITY PLANNING
others are mitigated—in other words as reality replaces conjecture—and new conjecture replaces old conjecture. The various parts of the project plan, including the risk management plan, are then scrutinized by the group and combined into a composite project plan. The composite plan, still not completely firm, is approved by each participating group, by the project manager, and then by senior organizational management. Each subsequent approval hardens the plan somewhat, and when senior management has endorsed it, any further changes in the project’s scope must be made by processing a formal change order. If the project is not large or complex, informal written memoranda can substitute for the change order. The main point is that no significant changes in the project are made, without written notice, following top management’s approval. The definition of “significant” depends on the specific situation and the people involved.
Project Management in Practice Child Support Software a Victim of Scope Creep
In March 2003, the United Kingdom’s Child Support Agency (CSA) started using their new £456 million ($860 million) software system for receiving and disbursing child support payments. However, by the end of 2004 only about 12 percent of all applications had received payments, and even those took about three times longer than normal to process. CSA thus threatened to scrap the entire system and withhold £1 million ($2 million) per month in service payments to the software vendor. The problem was thought to be due to both scope creep and the lack of a risk management strategy. The vendor claimed that the proj-
81721_Ch06.indd 244
ect was disrupted constantly by CSA’s 2500 change requests, while CSA maintained there were only 50, but the contract did not include a scope management plan to help define what constituted a scope change request. And the lack of a risk management strategy resulted in no contingency or fallback plans in case of trouble, so when project delays surfaced and inadequate training became apparent, there was no way to recover. Source: Project Management Institute. “Lack of Support,” PM Network, January. 2005, p. 1.
9/16/08 1:09:32 AM
6.1
INITIAL PROJECT COORDINATION AND THE PROJECT PLAN
245
The PM generally takes responsibility for gathering the necessary approvals and assuring that any changes incorporated into the plan at higher levels are communicated to, and approved by, the units that have already signed off on the plan. Nothing is as sure to enrage functional unit managers as to find that they have been committed by someone else to alterations in their carefully considered plans without being informed. Violation of this procedure is considered a betrayal of trust. Several incidents of this kind occurred in a firm during a project to design a line of children’s clothing. The anger at this change without communication was so great that two chief designers resigned and took jobs with a competitor. Because senior managers are almost certain to exercise their prerogative to change the plan, the PM should always return to the contributing units for consideration and reapproval of the plan as modified. The final, approved result of this procedure is the project plan, also sometimes known as the baseline plan. When the planning phase of the project is completed, it is valuable to hold one additional meeting, a postplanning review (Martinez, 1994). This meeting should be chaired by an experienced project manager who is not connected with the project (Antonioni, 1997). The major purpose of the postplanning review is to make sure that all necessary elements of the project plan have been properly developed and communicated.
Outside Clients When the project is to deliver a product/service to an outside client, the fundamental planning process is unchanged except for the fact that the project’s scope cannot be altered without the client’s permission. A common “planning” problem in these cases is that marketing has promised deliverables that engineering may not know how to produce on a schedule that manufacturing may be unable to meet. This sort of problem usually results when the various functional areas are not involved in the planning process at the time the original proposal is made to the potential client. We cannot overstate the importance of a carefully determined set of deliverables, accepted by both project team and client (Martin et al., 1998). Two objections to such early participation by engineering and manufacturing are likely to be raised by marketing. First, the sales arm of the organization is trained to sell and is expected to be fully conversant with all technical aspects of the firm’s products/services. Further, salespeople are expected to be knowledgeable about design and manufacturing lead times and schedules. On the other hand, it is widely assumed by marketing (with some justice on occasion) that manufacturing and design engineers do not understand sales techniques, will be argumentative and/or pessimistic about client needs in the presence of the client, and are generally not “housebroken” when customers are nearby. Second, it is expensive to involve so much technical talent so early in the sales process—typically, prior to issuing a proposal. It can easily cost a firm more than $10,000 to send five technical specialists on a short trip to consider a potential client’s needs, not including a charge for the time lost by the specialists. The willingness to accept higher sales costs puts even more emphasis on the selection process. The rejoinder to such objections is simple. It is almost always cheaper, faster, and easier to do things right the first time than to redo them. When the product/service is a complex system that must be installed in a larger, more complex system, it is appropriate to treat the sale like a project, which deserves the same kind of planning. A great many firms that consistently operate in an atmosphere typified by design and manufacturing crises have created their own panics. (Software producers and computer system salespeople take note!) In fairness, it is appropriate to urge that anyone meeting customers face to face should receive some training in the tactics of selling.
81721_Ch06.indd 245
9/16/08 1:09:32 AM
246
CHAPTER 6 / PROJECT ACTIVITY PLANNING
Project Management in Practice Shanghai Unlucky with Passengers
To speed passengers to Shanghai’s new international airport, China built a magnetic levitation (maglev) train that runs every 10 minutes from Shanghai’s business center to the Pudong International Airport. Reaching speeds over 300 miles an hour, it whisks people to the airport 20 miles away in less than 8 minutes. However, according to the vice-director of the train company, “We are not lucky with ticket sales.” since the trains are virtually empty. The reason is because to meet the project’s time deadline and budget, the train station was located 6 miles
outside the city center, requiring lengthy public transportation to get there. So in spite of the technical, budget, and timing success of the project, it failed to meet the needs of the passengers. China is currently investigating extending the line to the downtown area, but that will be a much more expensive and time-consuming project.
Source: Project Management Institute. “A Derailed Vision,” PM Network, April 2004, p. 1.
A potential remedy for these problems is the use of multifunctional teams, also known in this context as concurrent engineering. This latter term, born in the 1980s, has been applied to product/service development “where, typically, a product design and its manufacturing process are developed simultaneously, cross-functional groups are used to accomplish integration, and the voice of the customer is included in the product development process” (Smith, 1997, p. 67). Multifunctional teaming may also be applied to the software design and development process. In software projects it is critically important to keep the customer involved in the process of developing software requirements from the start of the project. Clients often ask such questions as “While you’re at it, can you fix it so the software will also . . . ?” Software writers tend to focus on technical feasibility when dealing with these
81721_Ch06.indd 246
9/16/08 1:09:32 AM
6.1
INITIAL PROJECT COORDINATION AND THE PROJECT PLAN
247
questions and not uncommonly fail to note the additional time and cost required. More will be said about multifunctional teaming later in this chapter. In any event, if multifunctional planning is not utilized, the risk management group should be informed. The group will have additional work to do. A special approach developed by the software industry for determining the project performance requirements is called requirements formulation. Although intended for use with outside clients, it applies equally well for internal clients and for nonsoftware projects. As suggested above, it involves having the project team work with the customer to elaborate through “stories” how they see the “actor” who will use the software (project results) interacting with it. The actor may be a person, group, or even other computer systems. The project team members work with the client to elaborate the stories and better understand how the software will interact and operate, and all the various actions it needs to be able to take. The stories, often called “use cases,” are broken into small enough units that the project work can be clearly understood; its effort, schedule, and cost determined; and any new technologies identified. Last, it is understood that the client’s stories will change over time—some added, some changed, some dropped—and that the team will have to stay in touch with the client to determine how their needs have changed.
Project Plan Elements Given the project plan, approvals really amount to a series of authorizations. The PM is authorized to direct activities, spend monies (usually within preset limits) request resources and personnel, and start the project on its way. Senior management’s approval not only signals its willingness to fund and support the project, but also notifies subunits in the organization that they may commit resources to the project. The process of developing the project plan varies from organization to organization, but any project plan must contain the following elements:
•
• •
•
81721_Ch06.indd 247
Overview This is a short summary of the objectives and scope of the project. It is directed to top management and contains a statement of the goals of the project, a brief explanation of their relationship to the firm’s objectives, a description of the managerial structure that will be used for the project, and a list of the major milestones in the project schedule. Objectives or Scope This contains a more detailed statement of the general goals noted in the overview section. The statement should include profit and competitive aims as well as technical goals. General Approach This section describes both the managerial and the technical approaches to the work. The technical discussion describes the relationship of the project to available technologies. For example, it might note that this project is an extension of work done by the company for an earlier project. The subsection on the managerial approach takes note of any deviation from routine procedure—for instance, the use of subcontractors for some parts of the work. Contractual Aspects This critical section of the plan includes a complete list and description of all reporting requirements, customer-supplied resources, liaison arrangements, advisory committees, project review and cancellation procedures, proprietary requirements, any specific management agreements (e.g., use of subcontractors), as well as the technical deliverables and their specifications, delivery schedules, and a specific procedure for changing any of the above. (Project change orders will be discussed in Chapter 11.) Completeness is a necessity in this
9/16/08 1:09:33 AM
248
CHAPTER 6 / PROJECT ACTIVITY PLANNING
•
•
•
•
•
81721_Ch06.indd 248
section. If in doubt about whether an item should be included or not, the wise planner will include it. Schedules This section outlines the various schedules and lists all milestone events. Each task is listed, and the estimated time for each task should be obtained from those who will do the work. The projected baseline schedule is constructed from these inputs. The responsible person or department head should sign off on the final, agreedon schedule. Resources There are two primary aspects to this section. The first is the budget. Both capital and expense requirements are detailed by task, which makes this a project budget (discussed further in Chapter 7). One-time costs are separated from recurring project costs. Second, cost monitoring and control procedures should be described. In addition to the usual routine elements, the monitoring and control procedures must be designed to cover special resource requirements for the project, such as special machines, test equipment, laboratory usage or construction, logistics, field facilities, and special materials. Personnel This section lists the expected personnel requirements of the project. Special skills, types of training needed, possible recruiting problems, legal or policy restrictions on work force composition, and any other special requirements, such as security clearances, should be noted here. (This reference to “security” includes the need to protect trade secrets and research targets from competitors as well as the need to protect the national security.) It is helpful to time-phase personnel needs to the project schedule. This makes clear when the various types of contributors are needed and in what numbers. These projections are an important element of the budget, so the personnel, schedule, and resources sections can be cross-checked with one another to ensure consistency. Risk Management Plans This covers potential problems as well as potential lucky breaks that could affect the project. Sometimes it is difficult to convince planners to make a serious attempt to anticipate potential difficulties or benefits. One or more issues such as subcontractor default, unexpected technical breakthroughs, strikes, hurricanes, new markets for our technology, tight deadlines and budgets, and sudden moves by a competitor are certain to occur—the only uncertainties are which, when, and their impact. In fact, the timing of these disasters and benefits is not random. There are times in the life of every project when progress depends on subcontractors, the weather, or timely technical successes. Plans to deal with favorable or unfavorable contingencies should be developed early in the project’s life. Some PMs avoid dealing with risk because “Trying to list everything that can go wrong gets everyone in a negative state of mind. I want my people to be positive!” Some PMs disdain this section of the plan on the grounds that crises and lucky breaks cannot be predicted. Further, they claim to be very effective firefighters. No amount of current planning can solve the current crisis, but preplanning may avert or mitigate some. As Zwikael et al. (2007) report, in high-risk projects better project planning improved success on four measures: schedule overrun, cost overrun, technical performance, and customer satisfaction. They conclude that improving the project plan is a more effective risk management approach than using the usual risk management tools. Evaluation Methods Every project should be evaluated against standards and by methods established at the project’s inception, allowing for both the direct and ancillary goals of the project, as described in Chapter 1. This section contains a brief description
9/16/08 1:09:34 AM
6.1
INITIAL PROJECT COORDINATION AND THE PROJECT PLAN
249
of the procedure to be followed in monitoring, collecting, storing, and evaluating the history of the project. These are the elements that constitute the project plan and are the basis for a more detailed planning of the budgets, schedules, work plan, and general management of the project. Once this basic plan is fully developed and approved, it is disseminated to all interested parties. Before proceeding, we should make explicit that this formal planning process is required for relatively large projects that cannot be classified as “routine” for the organization. The time, effort, and cost of the planning process we have described is not justified for routine projects, for example, most plant or machine maintenance projects. Admittedly, no two routine maintenance projects are identical, but they do tend to be quite similar. It is useful to have a complete plan for such projects, but it is meant to serve as a template that can easily be modified to fit the specific maintenance project at hand. The template also can serve as a benchmark in a continuous improvement program.
Project Planning in Action Project plans are usually constructed by listing the sequence of activities required to carry the project from start to completion. This is not only a natural way to think about a project; it also helps the planner decide the necessary sequence of things—a necessary consideration for determining the project schedule and duration. In a fascinating paper, Aaron and his colleagues (1993) describe the planning process used at a telecommunications firm. Using a planning process oriented around the life-cycle events common for software and hardware product developers, they divide the project into nine segments:
• • • • • • • • •
Concept evaluation Requirements identification Design Implementation Test Integration Validation Customer test and evaluation Operations and maintenance
Each segment is made up of activities and milestones (significant events). As the project passes through each of the segments, it is subjected to a series of “quality gates” (also known as “phase gates,” “toll gates,” etc.) that must be successfully passed before proceeding to the next segment. Note that the planning process must pass through the quality gates as must the physical output of the project itself. For example, the requirements identification segment must meet the appropriate quality standards before the design segment can be started, just as design must be approved before implementation can begin. See Section 6.5 for more on this system. Beginning in Chapter 1, we have argued that quality should be an inherent part of the project’s specification/deliverables. The approach taken by Aaron et al. (1993) is a direct embodiment of our position. Indeed, it “goes us one better,” by applying quality standards to the process of managing the project as well as to the project’s deliverables.
81721_Ch06.indd 249
9/16/08 1:09:34 AM
250
CHAPTER 6 / PROJECT ACTIVITY PLANNING
Project Management in Practice Minnesota DOT Project Planning
15
169 52
18
10 94
65
23
3 61
36
508
17
101
241
35W
12 14
14
169
1
252
4
4
35E
17
Mi
49
47
ssi
ssi
14
8
65
10
pp i
504
61
35W
507
59 7
3
30 152 1
14
Ri
31 10
921
501C
52
903
923
44
15
96
96
96 47
10
244
152
169
905
694
10
501 55
505
100
502C
506
95
920
35E
r
252
152
18 94
10
1
ve
109
12
65 35W
244
694
17 47
2 81
504C 509
503
65
51
88
153
61
904
95
36 5
66
66
35W
30
30
502
55
28
10
31 32
511
510
49
52
94
505C
901
35E
902
280
100 12
12
915
52
65
12
52
7
101
51
121
3
515
121
169
13
514 513
100
17
520
20
35E
4
494
149
31
519
18
517
101
95
907
26
20
22
149
13
19A
1
10
910
919
506C
56 61
111
516
1 21
95 52
8
101
512
32
32
55
169 41
926C
13
83
17
15
77
31
71
35E
10
Mis
40 42
42
3
42 27
14
23
924
42
sis
55
42
55
52
35
47
918
61
169
56
MINOR OR NON-PEAK DELAY
The Minnesota Department of Transportation (DOT) is responsible for facility construction and maintenance for highways, bridges, airports, waterways, railroads, and even bicycle paths. At any given time, there will be approximately 1100 projects— typically, highway improvements—in active development, with a turn-over of about 300 per year. These projects will range from $50,000 paint jobs to multimillion dollar freeway interchanges. The computerized Project Management and Scheduling System (PMSS) used to manage these projects is based on a work breakdown structure detailing about 100 activities involving 75 functional groups,
81721_Ch06.indd 250
914
85
9
pi
er
48
17
sip
Riv
911
13
15
21
928
494
5
521 212
41
15
18
912
110
518
19
909C 922
62 35W
16 56
52
5
62
94
39
2
46
913 522
507C
930
917
46
19
12
94
906C
ST. PAUL
MINNEAPOLIS
70
916
94
55
35W 7
River
169
508C
503C
34
5
94 15
15
694
65
St. C
55 101
5
36
9
9
36
15
44
roix
30
101
212
7
8
MAJOR DELAY
40 of which are in-house groups and the rest being consultants. The PMSS encompasses three major areas: scheduling, funding, and human resource planning. It allows planning, coordination, and control of the work progress and resource requirements for multiple projects over a multiyear time span, since projects may continue for up to four years in some cases. This integration offers the capability to relate work plans to funding availability as well as human resource availability. Conversely, resource use can be planned according to the construction project schedule. Other constraints can also be included in the system and its reports, such
9/16/08 1:09:34 AM
6.2
as avoiding projects that might overly congest a hightraffic area (see figure) or properly sequencing subprojects such as grading, surfacing, and finishing. The PMSS system gives management a “big picture” perspective of what is happening in terms of workflow over time and geography. It has also enhanced the department’s ability to answer questions
6.2
SYSTEMS INTEGRATION
251
about activities, funding, labor, and equipment, and to present reports in a variety of configurations to satisfy the needs of many different parties.
Source: R. Pearson, “Project Management in the Minnesota Department of Transportation,” PM Network, November 1988.
SYSTEMS INTEGRATION Systems integration (sometimes called systems engineering or concurrent engineering) is one part of integration management, discussed further in Section 6.5, and plays a crucial role in the performance aspect of the project. We are using this phrase to include any technical specialist in the science or art of the project who is capable of integrating the technical disciplines to achieve the customer’s objectives, and/or integrating the project into the customer’s system. As such, systems integration is concerned with three major objectives. 1. Performance Performance is what a system does. It includes system design, reliability, quality, maintainability, and repairability. Obviously, these are not separate, independent elements of the system, but are highly interrelated qualities. Any of these system performance characteristics are subject to overdesign as well as underdesign but must fall within the design parameters established by the client. If the client approves, we may give the client more than the specifications require simply because we have already designed to some capability, and giving the client an overdesigned system is faster and less expensive than delivering precisely to specification. At times, the aesthetic qualities of a system may be specified, typically through a requirement that the appearance of the system must be acceptable to the client. 2. Effectiveness The objective is to design the individual components of a system to achieve the desired performance. This is accomplished through the following guidelines:
• • •
Require no component performance specifications unless necessary to meet one or more systems requirements. Every component requirement should be traceable to one or more systems requirements. Design components for effective system performance, not the performance of subsystems.
It is not unusual for clients or project teams to violate any or all of these seemingly logical dicta. Tolerances specified to far closer limits than any possible system requirement, superfluous “bells and whistles,” and “off the shelf ” components that do not work well with the rest of the system are so common they seem to be taken for granted by both client and vendor. The causes of these strange occurrences are probably associated with some combination of inherent distrust between buyer and seller, the desire to overspecify in order “to be sure,” and the feeling that “this part will do just as well.” As we saw in Chapter 4, these attitudes can be softened and replaced with others that are more helpful to the process of systems integration.
81721_Ch06.indd 251
9/16/08 1:09:34 AM
252
CHAPTER 6 / PROJECT ACTIVITY PLANNING
3. Cost Systems integration considers cost to be a design parameter, and costs can be accumulated in several areas. Added design cost may lead to decreased component cost, leaving performance and effectiveness otherwise unchanged. Added design cost may yield decreased production costs, and production cost may be traded off against unit cost for materials. Value engineering (or value analysis) examines all these cost trade-offs and is an important aspect of systems integration (Morris, 1979). It can be used in any project where the relevant cost trade-offs can be estimated. It is simply the consistent and thorough use of cost/effectiveness analysis. Multifunctional teaming (see Section 6.5) is a way of achieving systems integration and, as such, may play a major role in the success or failure of any complex project. If a risky approach is taken by systems integration, it may delay the project. If the approach is too conservative, we forego opportunities for enhanced project capabilities or advantageous project economics. A good design will take all these trade-offs into account in the initial stages of the technical approach. A good design will also avoid locking the project into a rigid solution with little flexibility or adaptability in case problems occur later or changes in the environment demand changes in project performance or effectiveness. Multifunctional teams are also valuable for assessing and mitigating risk in the project, particularly in anticipating crises during the execution of the project (refer to the Directed Reading: “Planning for Crises in Project Management” at the end of this chapter). The details of systems integration are beyond the scope of this book. The interested reader is referred to Blanchard et al. (2006). In any case, the ability to do systems integration/engineering depends on at least a minimal level of technical knowledge about most parts of the project. It is one of the reasons project managers are expected to have some understanding of the technology of the projects they head.
6.3
THE ACTION PLAN In this and the following sections of this chapter, and in Chapters 7 and 8 on budgeting and scheduling, we move into a consideration of the details of the project. We need to know exactly what is to be done, by whom, and when. All activities required to complete the project must be precisely delineated and coordinated. The necessary resources must be available when and where they are needed, and in the correct amounts. Some activities must be done sequentially, but some may be done simultaneously. If a large project is to come in on time and within cost, a great many things must happen when and how they are supposed to happen. Yet each of these details is uncertain and thus each must be subjected to risk management. In this section, we propose a conceptually simple method to assist in sorting out and planning all this detail. It is a hierarchical planning system—a method of constructing an action plan and, as we will see shortly, a WBS. We have also named it the “level planning process.” To accomplish any specific project, a number of major activities must be undertaken and completed. Make a list of these activities in the general order in which they would occur. This is Level 1. A reasonable number of activities at this level might be anywhere between 2 and 20. (There is nothing sacred about these limits. Two is the minimum possible breakdown, and 20 is about the largest number of interrelated items that can be comfortably sorted and scheduled at a given level of aggregation.) Now break each of these Level l items into 2 to 20 tasks. This is Level 2. In the same way, break each Level 2 task into 2 to 20 subtasks. This is Level 3. Proceed in this way until the detailed tasks at a level are so well understood that there is no reason to continue with the work breakdown.
81721_Ch06.indd 252
9/16/08 1:09:35 AM
6.3
THE ACTION PLAN
253
It is important to be sure that all items in the list are at roughly the same level of task generality. In writing a book, for example, the various chapters tend to be at the same level of generality, but individual chapters are divided into finer detail. Indeed, subdivisions of a chapter may be divided into finer detail still. It is difficult to overstate the significance of this simple dictum. It is central to the preparation of most of the planning documents that will be described in this chapter and those that follow. The logic behind this simple rule is persuasive. We have observed both students and professionals in the process of planning. We noted that people who lack experience in planning tend to write down what they perceive to be the first activity in a sequence of activities, begin to break it down into components, take the first of these, break it further, until they have reached a level of detail they feel is sufficient. They then take the second step and proceed similarly. If they have a good understanding of a basic activity, the breakdown into detail is handled well. If they are not expert, the breakdown lacks detail and tends to be inadequate. Further, we noted that integration of the various basic activities was poor. An artist of our acquaintance explained: When creating a drawing, the artist sketches in the main lines of a scene, and then builds up the detail little by little over the entire drawing. In this way, the drawing has a “unity.” One cannot achieve this unity by drawing one part of the scene in high detail, then moving to another part of the scene and detailing it. He asked a young student to make a pen-and-ink sketch of a fellow student. Her progress at three successive stages of her drawing is shown in Figure 6-1.
Figure 6-1 The “level planning process.”
81721_Ch06.indd 253
9/16/08 1:09:35 AM
254
CHAPTER 6 / PROJECT ACTIVITY PLANNING
This illustrates the “level planning process.” The PM will probably generate the most basic level (Level 1) and possibly the next level as well. Unless the project is quite small, the generation of additional levels will be delegated to the individuals or groups who have responsibility for doing the work. Maintaining the “level planning” discipline will help keep the plan focused on the project’s deliverables rather than on the work at a subsystem level. Some project deliverables may be time sensitive in that they may be subject to alteration at a later date when certain information becomes available. A political campaign is an example of such a project. A speech may be rewritten in whole or in part to deal with recently released data about the national economy, for instance. This describes a planning process that must be reactive to information or demands that change over time. This type of process is sometimes called “rolling wave planning.” The overall structure of the reactive planning process still should be hierarchical. Sometimes a problem arises because some managers tend to think of outcomes when planning and others think of specific tasks (activities). Many mix the two. The problem is to develop a list of both activities and outcomes that represents an exhaustive, nonredundant set of results to be accomplished (outcomes) and the work to be done (activities) in order to complete the project. In this hierarchical planning system, the objectives are taken from the project plan. This aids the planner in identifying the set of required activities for the objectives to be met, a critical part of the action plan. Each activity has an outcome (event) associated with it, and these activities and events are decomposed into subactivities and subevents, which, in turn, are subdivided again. Assume, for example, that we have a project whose purpose is to acquire and install a large machining center in an existing plant. In the hierarchy of work to be accomplished for the installation part of the project, we might find such tasks as “Develop a plan for preparation of the floor site” and “Develop a plan to maintain plant output during the installation and test period.” These tasks are two of a larger set of jobs to be done. The task “. . . preparation of the floor site” is subdivided into its elemental parts, including such items as “Get specifics on machine center mounting points,” “Check construction specifications on plant floor,” and “Present final plan for floor preparation for approval.” A form that may help to organize this information is shown in Figure 6-2. (Additional information about each element of the project will be added to the form later when budgeting and scheduling are discussed.) Figure 6-3 shows a partial action plan for a college “Career Day.” (Clearly, Figure 6-3 is not complete. For example, the list of activities does not show such items as “setting and decorating the tables.” In the interest of simplicity and in order to avoid doubling the length—and cost—of this book, the examples shown in this and following chapters are meant to be indicative, not exhaustive.) A short digression is in order before continuing this discussion on action plans. The actual form the action plan takes is not sacrosanct. As we will show in this and the coming chapters, not even all elements of the action plan shown in Figure 6-2 may be shown in all cases. In some cases, for example, the amounts of specific resources required may not be relevant. In others, “due dates” may be substituted for activity durations. The appearance of an action plan will probably differ in different organizations, and may even differ between departments or divisions of the same organization (though standardization of format is usual, and probably desirable in any given firm). In some plans, numbers are used to identify activities; in others, letters. In still others, combinations of letters and numbers are used. In this chapter, we will illustrate several different forms of action plans drawn from “real life.” Our purpose is not to confuse the reader, but to focus the reader’s attention on the content of the plan, not its form.
81721_Ch06.indd 254
9/16/08 1:09:35 AM
6.3
THE ACTION PLAN
255
ACTION PLAN Deliverables
Measure(s) of accomplishment
Key constraints and assumptions
TASKS
Figure 6-2
ESTIMATED RESOURCES
IMMEDIATE PREDECESSOR TASKS
ESTIMATED TIME DURATION(S)
ASSIGNED TO
A form to assist hierarchical planning.
An action plan can also be represented by a simplified hierarchy, like the tree diagram in Figure 6-4, though this is more akin to the Work Breakdown Structure discussed in the next section. Professor Andrew Vazsonyi has called this type of diagram a Gozinto chart, after the famous, Italian mathematician Prof. Zepartzat Gozinto (of Vazsonyi’s invention). Readers familiar with the Bill of Materials in a Materials Requirements Planning (MRP) system will recognize the parallel to nested hierarchical planning, or the basic organizational chart depicting the formal structure of an organization. If the project does not involve capital equipment and special materials, estimates may not be necessary. Some projects require a long chain of tasks that are mostly sequential—for example, the real estate syndication of an apartment complex or the development and licensing of a new drug. Other projects require the coordination of many concurrent tasks that finally come together—for example, the design and manufacture of an aircraft engine or the construction of a house. Still others have the characteristics of both. An example of a plan to acquire a subsidiary is illustrated in Figures 6-5a and 6-5b. A verbal “action plan” was written in the form of a memorandum, Figure 6-5a, and was followed by the more common, tabular plan shown in Figure 6-5b. Only one page of a five-page plan is shown. The individuals and groups mentioned developed similar plans at a greater level of detail. (Names have been changed at the request of the firm.) As we have noted several times, the importance of careful planning can scarcely be overemphasized. Pinto et al. (1987, 1988) developed a list of ten factors that should be associated with success in implementation projects. The factors were split into strategic and tactical clusters. Of interest here are the strategic factors: 1. Project mission. It is important to spell out clearly defined and agreed-upon objectives in the project plan. 2. Top management support. It is necessary for top managers to get behind the project at the outset and make clear to all personnel involved that they support successful completion.
81721_Ch06.indd 255
9/16/08 1:09:36 AM
256
CHAPTER 6 / PROJECT ACTIVITY PLANNING
ACTION PLAN Objective Career Day Time Responsibility (weeks)
Steps 1. Contact Organizations a. Print forms b. Contact organizations c. Collect display information d. Gather college particulars e. Print programs f. Print participants’ certificates
Secretary Program manager Office manager Secretary Secretary Graduate assistant
6 15 4 4 6 8
– 1.a 1.b 1.b 1.d –
Print shop Print Shop
2. Banquet and Refreshments a. Select guest speaker b. Organize food c. Organize liquor d. Organize refreshments
Program manager Program manager Director Graduate assistant
14 3 10 7
– 1.b 1.b 1.b
Caterer Dept. of Liquor Control Purchasing
3. Publicity and Promotion a. Send invitations b. Organize gift certificates c. Arrange banner d. Contact faculty e. Advertise in college paper f. Class announcements g. Organize posters
Graduate assistant Graduate assistant Graduate assistant Program manager Secretary Graduate assistant Secretary
2 5.5 5 1.5 5 1 4.5
– – 1.d 1.d 1.d 3.d 1.d
Print shop Word processing Newspaper Registrar’s office Print shop
4. Facilities a. Arrange facility for event b. Transport materials
Program manager Office manager
2.5 .5
1.c 4.a
Movers
Figure 6-3
Prec.
Resources Print shop Word processing
Word processing
Partial action plan for college “Career Day.”
3. Project’s action plan. A detailed, scheduled plan of the required steps in the implementation process needs to be developed, including all resource requirements (money, raw materials, staff, etc.). Extensive empirical testing showed these factors to be required for implementation project success. (Tactical factors are also necessary for success, but they are not a consideration here.) At this point, it might be helpful to sum up this section with a description of how the planning process actually works in many organizations. Assume that you, the PM, have been given responsibility for developing the computer software required to transmit a medical X-ray from one location to another over a telephone line. There are several
81721_Ch06.indd 256
9/16/08 1:09:36 AM
6.3
257
00089 Toy bus (case lot)
Level 0
10003 Case label
Level 1
10189 Toy bus package
20003 Bus box
Level 2
10002 Packing case
20289 Toy bus
30089 Body
Level 3
Level 4
THE ACTION PLAN
400337 Plastic dye — blue
Level 5
Figure 6-4
30077 Wheel/axle
50317 Plastic powder
40050 Axle
40039 Wheel
50317 Plastic powder
50702 Plastic dye— black
Gozinto chart for a toy bus. Source: Harris et al., 1981.
problems that must be solved to accomplish this task. First, the X-ray image must be translated into computer language. Second, the computerized image must be transmitted and received. Third, the image must be displayed (or printed) in a way that makes it intelligible to the person who must interpret it. You have a team of four programmers and a couple of assistant programmers assigned to you. You also have a specialist in radiology assigned part-time as a medical advisor. Your first action is to meet with the programmers and medical advisor in order to arrive at the technical requirements for the project. From these requirements, the project mission statement and detailed specifications will be derived. (Note that the original statement of your “responsibility” is too vague to act as an acceptable mission statement.) The basic actions needed to achieve the technical requirements for the project are then developed by the team. For example, one technical requirement would be to develop a method of measuring the density of the image at every point on the X-ray and to represent this measurement as a numerical input for the computer. This is the first level of the project’s action plan. Responsibility for accomplishing the first level tasks is delegated to the project team members who are asked to develop their own action plans for each of the first level tasks. These are the second level action plans. The individual tasks listed in the second level plans are then divided further into third level action plans detailing how each second level task will be accomplished. The process continues until the lowest level tasks are perceived as “units” or “packages” of work. Early in this section, we advised the planner to keep all items in an action plan at the same level of “generality” or detail. One reason for this is now evident. The tasks at any
81721_Ch06.indd 257
9/16/08 1:09:36 AM
258
CHAPTER 6 / PROJECT ACTIVITY PLANNING
MEMO To allow Ajax to operate like a department of Instat by April 1, 1996, we must do the following by the dates indicated. September 24 Ajax Management to be advised of coming under Instat operation. The Instat sales department will begin selling Ajax Consumer Division production effective Jan. 1, 1996. There will be two sales groups: (1) Instat, (2) Ajax Builder Group.
November 5 Instat regional managers at Ajax for sales training session.
October 15 Instat Regional Managers advised—Instat sales department to assume sales responsibility for Ajax products to distribution channels, Jan. 1, 1996.
November 30 Data Processing (Morrie Reddish) and Mfg. Engineering (Sam Newfield): Request DP tapes from Bob Cawley, Ajax, for conversion of Ajax to Instat eng. records: master inventory file, structure file, bill of materials file, where-used file, crossreference Instat to Ajax part numbers, etc. Allow maximum two weeks until December 14, 1995, for tapes to be at Instat.
October 15 Ajax regional managers advised of sales changes effective Jan. 1, 1996. October 15 Instat Management, Bob Carl, Van Baker, and Val Walters visit Ajax management and plant. Discuss how operations will merge into Instat. October 22 Ajax regional managers advise Ajax sales personnel and agents of change effective Jan. 1, 1996. October 24 Brent Sharp and Ken Roadway visit Instat to coordinate changeover. October 29 Instat regional managers begin interviewing Ajax sales personnel for possible positions in Instat’s sales organization. Figure 6-5a
November 26 Walters visits Ajax to obtain more information.
December 3 ADMINISTRATIVE (Val Walters): Offer Norwood warehouse for sublease. December 3 SALES (Abbott and Crutchfield): Week of sales meeting . . . Instruction of salespeople in Ajax line . . . including procedure in writing Ajax orders on separate forms from Instat orders . . . temporarily, adding weight and shipping information, and procedure below: Crutchfield to write procedure regarding transmission of orders to Instat, credit check, and transmission of order information to shipping point, whether Norwood, San Francisco, or, later, Instat Cincinnati.
Partial action plan for merger of Ajax Hardware into Instat Corp (page 1 of 5).
level of the action plan are usually monitored and controlled by the level just above. If senior managers attempt to monitor and control the highly detailed work packages several levels down, we have a classic case of micromanagement. Another reason for keeping all items in an action plan at the same level of detail is that planners have an unfortunate tendency to plan in great detail all activities they understand well, and to be dreadfully vague in planning activities they do not understand well. The result is that the detailed parts of the plan are apt to be carried out and the vague parts of the plan are apt to be given short shrift.
81721_Ch06.indd 258
9/16/08 1:09:36 AM
6.3
THE ACTION PLAN
259
ACTION PLAN Objective: Merger of Ajax Hardware into Instat Corp. by April 1, 1996 1. 2.
3.
4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
Steps Ajax management advised of changes Begin preparing Instat sales dept. to sell Ajax Consumer Division products effective 1/1/96 Prepare to create two sales groups: (1) Instat, (2) Ajax Builder Group effective 1/1/96 Advise Instat regional managers of sales division changes Advise Ajax regional managers of sales division changes Visit Ajax management and plan to discuss merger of operations Advise Ajax sales personnel and agents Visit Instat to coordinate changeover Interview Ajax sales personnel for possible position Sales training sessions for Ajax products Visit Ajax again Request DP tapes from Bob Cawley for conversion Offer Norwood warehouse for sublease Write order procedures Sales meeting (instruction— product line and procedures) DP tapes due for master inventory file, bill of materials, structure file ... ... ...
Figure 6-5b
Due Date September 24
Responsibility Bob Carl, Van Baker
September 24
Bob Carl
1
September 24
Bob Carl
1
October 15
Bob Carl
2,3
October 15
Van Baker
2,3
October 15
4,5
October 22
Bob Carl, Van Baker, Val Walters Van Baker
October 24
Brent Sharp, Ken Roadway
6
October 29
Instat regional managers
7
November 5
Instat regional managers
9
November 26 November 30
Val Walters Morrie Reddish, Sam Newman Val Walters
8,10 6
December 3 December 3 December 3 December 14
Doug Crutchfield Fred Abbott, Doug Crutchfield Bob Cawley
Precedent ⫺
6
11 10 14 12
Tabular partial action plan for Ajax-Instat merger based on Figure 6-4a.
In practice, this process is iterative. Members of the project team who are assigned responsibility for working out a second, third, or lower-level action plan generate a tentative list of tasks, resource requirements, task durations, predecessors, etc., and bring it to the delegator for discussion, amendment, and approval. This may require several amendments and take several meetings before agreement is reached. The result is that delegator and delegatee both
81721_Ch06.indd 259
9/16/08 1:09:37 AM
260
CHAPTER 6 / PROJECT ACTIVITY PLANNING
Project Management in Practice Disaster Project Planning in Iceland
Natural hazards abound in the remote island nation of Iceland. Not only is it one of the most volcanically active countries in the world but its remote and exposed location in the North Atlantic Ocean leaves it vulnerable to gales, landslides, snow avalanches, and other such natural disasters. There are three phases of a natural disaster: the disaster itself, the response in terms of planning for the future, and the actual rebuilding project phase. Based on previous disasters such as the 1995 avalanche in Suodavik which claimed 15 lives, it has been proposed that the response phase be moved up in terms of contingency planning so the rebuilding phase can begin immediately after the disaster. The normal stakeholders in an Icelandic disaster typically include the population experiencing the disaster, the local government, the insurance bodies, Iceland Catastrophe Insurance, the Landslide and Avalanche Fund, and the consulting and contracting repair organizations. In the past, these
bodies have not been coordinated so every natural disaster had a delayed response to the event until all the political issues could be resolved, which often took months. The proposal for reorganizing the response phase includes such items as:
• • • •
Documenting the response plans in a compulsory project handbook Charging the financing bodies with directing the actual rebuilding process Identifying an appropriate coordinating body for each disaster type and location Identifying a process for the appointment of a project manager independent, both financially and emotionally, of all the main stakeholders.
Source: G. Torfason, “ Lessons from a Harsh Land: Project Management and Disaster Preparedness in Iceland,” PM Network, February 1998, pp. 39–42.
Buried homes in Heimaey, Iceland, from 1973 volcano.
81721_Ch06.indd 260
9/16/08 1:09:37 AM
6.4
THE WORK BREAKDOWN STRUCTURE AND LINEAR RESPONSIBILITY CHART
261
have the same idea about what is to be done, when, and at what cost. Not uncommonly, the individuals and groups that make commitments during the process of developing the action plan actually sign-off on their commitments. The whole process involves negotiation and will be further developed in the chapters to follow. Of course, like any managers, delegators can micromanage their delegatees, but micromanagement will not be mistaken for negotiation— especially by the delegatees.
6.4
THE WORK BREAKDOWN STRUCTURE AND LINEAR RESPONSIBILITY CHART As was the case with project action plans and contrary to popular notion, the Work Breakdown Structure (WBS) is not one thing. It can take a wide variety of forms that, in turn, serve a wide variety of purposes. The WBS often appears as an outline with the Level 1 tasks on the left and successive levels appropriately indented. The WBS may also picture a project subdivided into hierarchical units of tasks, subtasks, work packages, etc. as a type of Gozinto chart or tree constructed directly from the project’s action plan. Most current project management software will generate a WBS on command. Microsoft’s Project®, for example, links the indented activity levels with a Gantt chart (see Chapter 8, Figure 8-21) that visually shows the activity durations at any level. Much more will be said about this view in Chapter 9 on resource allocation. Another type of WBS shows the organizational elements associated with specific categories of tasks. Figure 6-6 is such a WBS for a conference. The Food group in the Facilities staff has responsibility for meals and drinks, including coffee breaks and water pitchers in the conference rooms. Five different food functions are shown, each presumably broken down into more detailed tasks. In this case, the account numbers for each task are shown so that proper charges can be assigned for each piece of work done on the project. Occasionally, planners attempt to plan by using Gantt charts, a network device commonly used to display project schedules (cf. Chapter 8, Section 8.2). The Gantt chart was invented as a scheduling aid. In essence, the project’s activities are shown on a horizontal bar chart with the horizontal bar lengths proportional to the activity durations. The activity bars are connected to predecessor and successor activities with arrows. While it is a useful device for displaying project progress, it is an awkward approach to project planning. Some writers recommend using the WBS as the fundamental tool for planning (Hubbard, 1993, for instance). We find nothing logically wrong with this approach, but it seems overly structured when compared to the way that firms noted for high-quality planning actually proceed. If this approach is used, the PM is well advised to adopt the general philosophy of building the WBS that was used when building the action plan (see Section 6.3). Other writers pay scant attention to the WBS, giving the subject little more than a mention. We do not find this a fatal error as long as the planning activity is otherwise carried out to an appropriate level of detail. In general, the WBS is an important document and can be tailored for use in a number of different ways. It may illustrate how each piece of the project contributes to the whole in terms of performance, responsibility, budget, and schedule. It may, if the PM wishes, list the vendors or subcontractors associated with specific tasks. It may be used to document that all parties have signed off on their various commitments to the project. It may note detailed
81721_Ch06.indd 261
9/16/08 1:09:37 AM
262
CHAPTER 6 / PROJECT ACTIVITY PLANNING
specifications for any work package, establish account numbers, specify hardware/software to be used, and identify resource needs. It may serve as the basis for making cost estimates (see Chapter 7) or estimates of task duration (see Chapter 8). Its uses are limited only by the needs of the project and the imagination of the PM. No one version of the WBS will suit all needs, so the WBS is not a document, but any given WBS is simply one of many possible documents. On occasion, it may be useful to create an Organizational Breakdown Structure (OBS) that displays the organizational units responsible for each of the various work elements in the WBS, or who must approve or be notified of progress or changes in its scope, since the WBS and OBS may well not be identical. That is, some major section of the WBS may be the responsibility of two or more departments, while other sections of the WBS, two or more, say, may all be the responsibility of one department. Such a document can be useful for department managers to see their total responsibilities for a particular project. The OBS is similar to the Linear Responsibility Chart discussed just below. The following general steps explain the procedure for designing and using the WBS. For small- or moderate-size projects, and depending on the use for which the WBS is designed, some of the following steps might be skipped, combined, extended, and handled less formally than our explanation indicates, particularly if the project is of a type familiar to the organization.
Levels Conference (10.00.00)
Location (11.00.00)
Sites (11.01.00)
Dates (11.02.00)
Entertainment (13.00.00)
Facilities (12.00.00)
Equip. (12.01.00)
Food (12.02.00)
Building (12.03.00)
Types
Timer & Rates
Coffee breaks (12.02.01)
Sessions (14.00.00)
Papers
Panels
Staffing (15.00.00)
Home office
Local
1
2
3
Breakfasts (12.02.02)
Lunches (12.02.03)
Dinners (12.02.04)
Drinks (12.02.05)
Figure 6-6
81721_Ch06.indd 262
Work breakdown structure (account numbers shown).
9/16/08 1:09:38 AM
6.4
THE WORK BREAKDOWN STRUCTURE AND LINEAR RESPONSIBILITY CHART
263
1. Using information from the action plan, list the task breakdown in successively finer levels of detail. Continue until all meaningful tasks or work packages have been identified and each task or package can be individually planned, budgeted, scheduled, monitored, and controlled. It should be obvious that if the set of work package descriptions is not complete and properly arranged, it is highly unlikely the project can be completed on time, on budget, and to specification. 2. For each such work package, identify the data relevant to the WBS (e.g., vendors, durations, equipment, materials, special specifications). List the personnel and organizations responsible for each task. It is helpful to construct a linear responsibility chart (sometimes called a responsibility matrix) to show who is responsible for what. This chart also shows critical interfaces between units that may require special managerial coordination. With it, the PM can keep track of who must approve what and who must report to whom. Such a chart is illustrated in Figure 6-7. If the project is not too complex, the responsibility chart can be simplified (see Figure 6-8). Figure 6-9 shows one page of a verbal responsibility chart developed by a firm to reorganize its distribution system. In this case, the chart takes the form of a 30-page document covering 116 major activities. 3. All work package information should be reviewed with the individuals or organizations who have responsibility for doing or supporting the work in order to verify the WBS’s accuracy. Resource requirements, schedules, and subtask relationships can now be aggregated to form the next higher level of the WBS, continuing on to each succeeding level of the hierarchy. At the uppermost level, we have a summary of the project, its budget, and an estimate of the duration of each work element. For the moment, we are ignoring
Responsibility WBS Subproject Determine need Solicit quotations Write approp. request.
Project Office Task A1 A2 B1 C1 C2 C3 " " "
Field Oper.
Project Manager
Contract Admin.
■
° ■
Project Eng. ● ▲ ▲
▲ ● ■
° °
° ° ■ ●
▲
Industrial Eng. ▲ ●
Field Manager
● ● ▲ ■
" " " Legend: ▲ Responsible ● Support ■ Notification Approval Figure 6-7 Linear responsibility chart.
°
81721_Ch06.indd 263
9/16/08 1:09:38 AM
264
CHAPTER 6 / PROJECT ACTIVITY PLANNING
General manager
Project manager
Manager engineering
Manager software
Manager manufacturing
Manager marketing
Subprogram manager manufacturing
Subprogram manager software
Subprogram manager hardware
Subprogram manager services
Establish project plan
Vice-president
uncertainty in estimating the budget and duration of work elements. We will deal with these subjects in Chapters 7 and 8. 4. For the purpose of pricing a proposal, or determining profit and loss, the total project budget should consist of four elements: direct budgets from each task as just described; an indirect cost budget for the project, which includes general and administrative overhead costs (G&A), marketing costs, potential penalty charges, and other expenses not attributable to particular tasks; a project “contingency” reserve for unexpected emergencies; and any residual, which includes the profit derived from the project, which may, on occasion, be intentionally negative. In Chapter 7 we argue that the budget used for pricing or calculation of profit should not be the same budget that the PM uses to control the project. 5. Similarly, schedule information and milestone (significant) events can be aggregated into a projected baseline schedule. The projected baseline schedule integrates the many different schedules relevant to the various parts of the project. It is comprehensive and may include contractual commitments, key interfaces and sequencing, milestone events, and progress reports. In addition, a time contingency reserve for unforeseeable delays might be included. A graphic example of a projected baseline schedule is shown in Figure 6-10.
6
2
1
3
3
3
3
4
4
4
4
Define WBS
5
1
3
3
3
3
Establish hardware specs
2
3
1
4
4
4
Establish software specs
2
3
4
1
Establish interface specs
2
3
1
4
4
4
Establish manufacturing specs
2
3
4
4
1
4
Define documentation
2
1
4
4
4
4
3
5
4
4
4
1
3
1
1
1
Establish market plan
5
Prepare labor estimate Prepare equipment cost estimate
3
3
3
4
4
4
4
4
1
1
1
4
4
4
4
Prepare material costs
3
1
1
1
4
4
4
4
Make program assignments
3
1
1
1
4
4
4
4
3
1
1
1
4
4
4
4
Establish time schedules
3
3
5
3
1 Actual responsibility 2 General supervision 3 Must be consulted Figure 6-8
81721_Ch06.indd 264
4 May be consulted 5 Must be notified 6 Final approval
Simplified linear responsibility chart.
9/16/08 1:09:38 AM
6.4
THE WORK BREAKDOWN STRUCTURE AND LINEAR RESPONSIBILITY CHART
265
Responsible Individuals Activities
Initiate Action
Work with
Clear Action with
Distribution System and Its Administration
1. Recommend distribution system to be used.
Mktg Officers
Mktg Officers
Mktg Officers
ILI & IHI LOB MCs M-A Cttee VP&Agcy Dir Group LOB MC M-A Cttee VP & Agcy Dir IA LOB MC M-A Cttee VP&Agcy Dir
Sr VP Mktg
Sr VP Mktg
Sr VP Mktg
Compensation
2. Determine provisions of salescompensation programs (e.g., commissions, subsidies, fringes).
3. Ensure cost-effectiveness testing of sales compensation programs.
Compensation Task Force Compensation Task Force Compensation Task Force Compensation Task Force
Mktg, S&S & Eqty Prod Offrs Mktg, S&S & Eqty Prod Offrs Mktg, S&S & Eqty Prod Offrs Mktg, S&S & Eqty Prod Offrs
President
VP&Agcy Dir
Dir MP&R M-A Cttee Dir MP&R M-A Cttee
Sr VP Mktg
VP S & S
Sr VP Mktg
President President
Territory
4. Establish territorial strategy for our primary distribution system. 5. Determine territories for agency locations and establish priorities for starting new agencies. 6. Determine agencies in which advanced sales personnel are to operate.
VP&Agcy Dir
Dir Ret Plnng Sls Dir Adv Sls
Sr VP Mktg
Legend: IA, ILI, IHI: Product lines LOB: Line of business MC: Management committee M-A Cttee: Marketing administration committee S&S: Sales and service MP&R: Marketing planning and research
Figure 6-9
Verbal responsibility chart.
Listed items 1 to 5 focus on the WBS as a planning tool. It may also be used as an aid in monitoring and controlling projects. Again, it is important to remember that no single WBS contains all of the elements described and any given WBS should be designed with specific uses in mind. 6. As the project is carried out, step by step, the PM can continually examine actual resource use, by work element, work package, task, and so on up to the full project level. By comparing actual against planned resource usage at a given time, the PM can identify problems, harden the estimates of final cost, and make sure that relevant corrective actions have been designed and are ready to implement if needed. It is necessary to examine resource usage
81721_Ch06.indd 265
9/16/08 1:09:38 AM
266
CHAPTER 6 / PROJECT ACTIVITY PLANNING
Subproject Determine need
Task A1 Find operations that benefit most
Responsible Dependent 2002 2003 Dept. Dept. J F M A M J J A S O N D J F M A M J J A S O N D Industrial ▲
A2 Approx. size and type needed
Project Eng.
I.E.
Solicit quotations
B1
Contact vendors & review quotes
P.E.
Fin., I.E., Purch.
Write appropriation request
C1
Determine tooling costs
Tool Design
I.E.
C2
Determine labor savings
I.E.
I.E.
C3
Actual writing
P.E.
Tool Dsgn., Fin., I.E.
D1 Order robot
Purchasing
P.E.
D2 Design and order or manufacture tooling
Tool Design
Purch., Tooling
D3 Specify needed gauges and order or mfg.
Q.C.
Tool Dsgn., Purch.
E1
Install robot
Plant Layout
Millwrights
E2
Train employees
Personnel
P.E. Mfg.
E3
Runoff
Mfg.
Q.C.
Purchase machine tooling, and gauges
Installation and startup
Legend: * Project completion Contractual commitment Planned completion ▲ Actual completion Status date Milestone planned ● Milestone achieved Planned progrss Actual progress Note: As of Jan. 31, 2003, the project is one month behind schedule. This is due mainly to the delay in task C1, which was caused by the late completion of A2.
Figure 6-10
*
Projected baseline schedule.
in relation to results achieved because, while the project may be over budget, the results may be farther along than expected. Similarly, the expenses may be exactly as planned, or even lower, but actual progress may be much less than planned. Control charts showing these earned values are described in more detail in Chapter 10. In Chapters 7 and 8, as we have just noted, the details of how to include risk in the budget and in the schedule will be covered. 7. Finally, the project schedule may be subjected to the same comparisons as the project budget. Actual progress is compared to scheduled progress by work element, package, task, and complete project, to identify problems and take corrective action. Additional resources may be brought to those tasks behind schedule to expedite them. These added funds may come out of the budget reserve or from other tasks that are ahead of schedule. This topic is discussed further in Chapter 9.
81721_Ch06.indd 266
9/16/08 1:09:39 AM
6.5
6.5
267
INTERFACE COORDINATION THROUGH INTEGRATION MANAGEMENT
PMBOK Guide
81721_Ch06.indd 267
INTERFACE COORDINATION THROUGH INTEGRATION MANAGEMENT
This section covers the PMBOK knowledge area 1 concerning Project Integration Management. Unlike the more extensive knowledge areas such as Risk, or Communication, this topic can be treated in a standalone fashion in this single section. The most difficult aspect of implementing the plan for a complex project is the coordination and integration of the various elements of the project so that they meet their joint goals of performance, schedule, and budget in such a way that the total project meets its goals. As projects become more complex, drawing on knowledge and skills from more areas of expertise—and, thus, more subunits of the parent organization as well as more outsiders—the problem of coordinating multidisciplinary teams (MTs) becomes more troublesome. At the same time, and as a result, uncertainty is increased. As the project proceeds from its initiation through the planning and into the actual process of trying to generate the project’s deliverables, still more problems arise. One hears, “Why didn’t you tell us that when we could have done something about it?” One hears, “We tried to tell you that this would happen, but you didn’t pay any attention to us.” These, as well as less printable remarks, are what one hears when the members of an MT do not work and play well together—in other words, when the various individuals and groups working on the project are not well integrated. Rather than operating as a team, they work as separate and distinct parts, each of which has its own tasks and is not much interested in the other parts. The intricate process of coordinating the work and timing of the different groups is called integration management. The term interface coordination is used to denote the process of managing this work across multiple groups. The linear responsibility chart discussed above is a useful aid to the PM in carrying out this task. It displays the many ways the members of the project team (which, as usual, includes all of the actors involved, not forgetting the client and outside vendors) must interact and what the rights, duties, and responsibilities of each will be. An early approach to this problem was developed by Benningson (1972). Called TREND (Transformed Relationships Evolved from Network Data), the analysis was designed to illustrate important linkages and dependencies between work groups. The aim was to alert the PM to potential problems associated with cross-functional interfaces and to aid in the design of effective ways to avoid or deal with potential interface problems. Benningson added interdependence, uncertainty, and prestige to the mix. The precise way in which these elements were attached to the relationships delineated in the project plan is best seen by reference to Benningson (1972). (A brief explanation of TREND also appeared in the third edition of this work, pp. 221–24.) A key point is that mapping all dependencies in the project can show a complete description of pr